Design of carbon fiber reinforced boron nitride matrix composites by vacuum-assisted polyborazylene transfer molding and pyrolysis

Journal of the European Ceramic Society

Volumn 33, Issue 15-16, 2013, Pages 2979-2992

  Zhong, Wenli ^a   Wang, Siqing ^a,e   Li, Junping ^a,f   Bechelany, Mirna Chaker ^b   Ghisleni, Rudy ^c   Rossignol, Fabrice ^b   Balan, Corneliu ^d   Chartier, Thierry ^b   Bernard, Samuel ^a   Miele, Philippe ^a  

^a UNIVERSITÉ DE MONTPELLIER   (France)

^b CNRS   (France)

^c SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^d UNIVERSITY POLITEHNICA OF BUCHAREST   (Romania)

^e NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY   (China)

^f AEROSPACE RESEARCH INSTITUTE OF MATERIALS AND PROCESSING TECHNOLOGY   (China)

Author keywords

Boron nitride; Carbon fibers; Composites; Polyborazylene; Polymer impregnation pyrolysis

Indexed keywords

BORON NITRIDE MATRIX; CARBON FIBER REINFORCED; COMPATIBLE MATERIALS; ELECTRICAL CONDUCTIVITY; FIBER-MATRIX BONDING; POLYBORAZYLENE; POLYMER IMPREGNATION PYROLYSIS; SCANNING ELECTRON MICROGRAPHS;

BORON NITRIDE; CARBON FIBERS; COMPOSITE MATERIALS; ELECTRIC PROPERTIES; SCANNING ELECTRON MICROSCOPY; SPACE APPLICATIONS; VACUUM; VACUUM TECHNOLOGY;

VACUUM APPLICATIONS;

BORON COMPOUNDS; CARBON FIBERS; COMPOSITES; ELECTRICAL PROPERTIES; IMPREGNATION; POLYMERS; PYROLYSIS; SCANNING ELECTRON MICROSCOPY;

EID: 84883215641     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2013.06.013     Document Type: Article

References (70)

1. Colombo P., Mera G., Riedel R., Soraru G.D. Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics. J Am Ceram Soc 2010, 93(7):1805-1837.
2. Polymer derived ceramics: theory and applications 2009, DEStech Publications, Inc, Lancaster (USA). P. Colombo, G.D. Soraru, R. Riedel, A. Kleebe (Eds.).
3. Design, processing and properties of ceramic materials from preceramic precursors 2012, Nova Science Pub Inc, USA. S. Bernard (Ed.).
4. Bernard S., Duperrier S., Cornu D., Miele P., Weinmann M., Balan C., et al. Chemical tailoring of Single-Source molecular and polymeric precursors for the preparation of ceramic fibers. J Optoelectron Adv Mater 2006, 8:648-653.
5. Naslain R. Processing of non-oxide ceramic matrix composites: an overview. Adv Sci Technol 2006, 129:21-30.
6. Naslain R. Processing of ceramic matrix composites. Key Eng Mater 1999, 164-165:3-10.
7. Naslain R., Langlais F., Fedou R. The CVI-processing of ceramic matrix composites. J Phys 1989, C5(05):191-207.
8. Motz G., Schmidt S., Beyer S. The PIP-process: precursor properties and applications. Ceramic matrix composites - fibre reinforced ceramics and their applications. 2008, 165-186. Wiley-VCH GmbH & Co. KGaA, Weinheim, Germany, [chapter 7]. W. Krenkel (Ed.).
9. Weinman M., Kamphowe T.W., Schuhmacher J., Müller K., Aldinger F. Design of polymeric Si-B-C-N ceramic precursors for application in fibre-reinforced composite materials. Chem Mater 2000, 12:2112-2122.
10. Filipuzzi L., Naslain R. Oxidation mechanisms and kinetics of 1D-SiC/C/SiC composite materials. II. Modeling. J Am Ceram Soc 1994, 77:467-472.
11. Christin F. Design, preformation and application of thermostructural composites (TSC) like C/C, C/SiC and SiC/SiC composites. Adv Engineer Mater 2002, 4(12):903-912.
12. Bechelany M., Brioude A., Stadelman P., Bernard S., Cornu D., Miele P. Preparation of BN micro/nanotubes with a unique chemical process. J Phys Chem C 2008, 112:18325-18330.
13. Bechelany M., Brioude A., Bernard S., Cornu D., Miele P. Boron nitride nanosheets decorating multiwall nanotubes. CrystEngComm 2011, 13:6526-6530.
14. Bernard S., Chassagneux F., Berthet M.P., Cornu D., Miele P. Crystallinity, crystalline quality and microstructural ordering in boron nitride fibers. J Am Ceram Soc 2005, 88:1607-1614.
15. Bernard S., Ayadi K., Létoffé J.-M., Chassagneux F., Berthet M.-P., Cornu D., et al. Evolution of structural features and mechanical properties during the conversion of poly[(methylamino)borazine] fibres into boron nitride fibres. J Solid State Chem 2004, 177:1803-1810.
16. Toutois P., Miele P., Jacques S., Cornu D., Bernard S. Structural and mechanical behavior of boron nitride fibres derived from poly[(methylamino)borazine] precursors: optimization of the curing and pyrolysis procedures. J Am Ceram Soc 2006, 89:42-49.
17. Paine R.T., Narula C.K. Synthetic routes to boron nitride. Chem Rev 1990, 90:73-91.
18. Fazen P.J., Beck J.S., Lynch A.T., Remsen E.E., Sneddon L.G. Thermally induced borazine dehydropolymerization reactions. synthesis and ceramic conversion reactions of a new high-yield polymeric precursor to boron nitride. Chem Mater 1990, 2:96-97.
19. Fazen P.J., Remsen E.E., Caroll P.J., Beck J.S., Sneddon L.G. Synthesis, properties, and ceramic conversion reactions of polyborazylene. A high-yield polymeric precursor to boron nitride. Chem Mater 1995, 7:1942-1956.
20. Wideman T., Remsen E.E., Cortez E., Chlanda V.L., Sneddon L.G. Amine-modified polyborazylenes: second-generation precursors to boron nitride. Chem Mater 1998, 10:412-421.
21. Kim D.-P., Economy J. Fabrication of oxidation-resistant carbon fibre/boron nitride matrix composites. Chem Mater 1993, 5:1216-1220.
22. Kim D.-P., Economy J. Occurrence of liquid crystallinity in a borazine polymer. Chem Mater 1994, 6:395-400.
23. Bernard S., Fiaty K., Cornu D., Miele P., Laurent P. Kinetic modelling of the polymer-derived ceramics (PDCs) route: investigations of the thermal decomposition kinetics of poly[B-(methylamino)borazine] precursors into boron nitride. J Phys Chem B 2006, 110:9048-9060.
24. Narula C.K., Schaeffer R., Paine R.T. Synthesis of boron nitride ceramics from polyborazinyl amine precursors. J Am Chem Soc 1987, 109:5556-5557.
25. Rye R.R., Borek T.T., Lindquist D.A., Paine R.T. Chemical reactions during the processing of borazine polymers. J Am Ceram Soc 1990, 73:1409-1412.
26. Paciorek K.J.L., Masuda S.R., Kratzer R.H., Schmidt W.R. Reactions of tris[bis(trimethylsilyl)amino]aluminum with ammonia and pyrolysis studies. Chem Mater 1991, 3:88-91.
27. Salles V., Bernard S., Brioude A., Cornu D., Miele P. A New class of boron nitride fibres with tunable properties by combining an electrospinning process and the polymer-derived ceramics route. Nanoscale 2010, 2:215-217.
28. Lourie O.R., Jones C.R., Bartlett B.M., Gibbons P.C., Ruoff R.S., Buhro W.E. CVD growth of boron nitride nanotubes. Chem Mater 2000, 12:1808-1810.
29. Salles V., Bernard S., Li J., Brioude A., Chehaidi S., Foucaud S., et al. Design of highly dense boron nitride by the combination of spray-pyrolysis of borazine and additive-free sintering of derived ultrafine powders. Chem Mater 2009, 21:2920-2929.
30. Bernard S., Salles V., Li J., Brioude A., Bechelany M., Demirci U.B., et al. High-yield synthesis of hollow boron nitride nano-polyhedrons. J Mater Chem 2011, 21:8694-8699.
31. Salles V., Bernard S., Chiriac R., Miele P. Structural and thermal properties of boron nitride nanoparticles. J Eur Ceram Soc 2012, 32:1867-1871.
32. 15N solid-state NMR study of a preceramic polyborazilene. Chem Mater 2001, 13:1700-1707.
33. Termoss H., Toury B., Payan S., Brioude A., Bernard S., Cornu D., et al. Preparation of boron nitride-based coatings on metallic substrates via infrared irradiation of dip-coated polyborazylene. J Mater Chem 2009, 19:2671-2674.
34. Bechelany M., Bernard S., Brioude A., Stadelmann P., Charcosset C., Fiaty K., et al. Synthesis of boron nitride nanotubes by a template-assisted polymer thermolysis process. J Phys Chem C 2007, 111:13378-13384.
35. Alauzun J.G., Ungureanu S., Brun N., Bernard S., Miele P., Backov R., et al. Novel monolith-type boron nitride hierarchical foams obtained through integrative chemistry. J Mater Chem 2011, 21:14025-14030.
36. Li J., Bernard S., Salles V., Gervais C., Miele P. Preparation of polyborazylene-derived bulk boron nitride with tunable properties by warm-pressing and pressureless pyrolysis. Chem Mater 2010, 22:2010-2019.
37. Schlienger S., Alauzun J., Michaux F., Vidal L., Parmentier J., Gervais C., et al. Design, processing and properties of zeolite-derived boron nitride-based architectures. Chem Mater 2012, 24:88-96.
38. Cofer C.G., Economy J. Oxidative and hydrolytic stability of boron nitride - a new approach to improving the oxidation resistance of carbonaceous structures. Carbon 1995, 33:389-395.
39. Cofer C.G., Economy J., Xu Y., Zangvil A., Lara-Curzio E., Ferber M.K., et al. Characterization of fibre/matrix interfaces in composites with boron nitride matrix. Compos Sci Technol 1996, 56:967-975.
40. Seghi S., Fabio B., Economy J. Carbon/carbon-boron nitride composites with improved wear resistance compared to carbon/carbon. Carbon 2004, 42:3043-3048.
41. Seghi S., Lee J., Economy J. High density carbon fibre/boron nitride matrix composites: fabrication of composites with exceptional wear resistance. Carbon 2005, 43:2035-2043.
42. Parker W.J., Jenkins R.J., Butler C.P., Abbott G.L. Flash method of determining thermal diffusivity, heat capacity and thermal conductivity. J Appl Phys 1961, 32:1679-1684.
43. Banthia N., Djeridane S., Pigeon M. Electrical resistivity of carbon and steel micro-fibre reinforced cements. Cem Concr Res 1992, 22:804-814.
44. Ci L., Suhr J., Pushparaj V., Zhang X., Ajayan P.M. Continuous carbon nanotube reinforced composites. Nano Lett 2008, 8:2762-2766.
45. Gonzalez C., Llorca J. Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling. Comp Sci Technol 2007, 67:2795-2806.
46. Shah Khan M.Z., Simpson G., Townsend C.R. A comparison of the mechanical properties in compression of two resin systems. Mater Lett 2002, 52:173-179.
47. Duperrier S., Calin A., Bernard S., Balan C., Miele P. Rheological behaviour of poly[(B-alkylamino)borazine] in a fibre spinning process. Soft Mater 2006, 4:123-142.
48. Duperrier S., Gervais C., Bernard S., Cornu D., Babonneau F., Balan C., et al. Design of a series of preceramic B-tri(methylamino)borazine-based polymers as fibre precursors: shear rheology investigations. Macromolecules 2007, 40:1028-1034.
49. Balan C. Rheology of pre-ceramic polymers. Polymer derived ceramics 2009, 89-106. DEStech Publ. Inc, Lancanster. P. Colombo (Ed.).
50. Ferraris C.F. Measurement of the rheological properties of high performance concrete: state of the art report. J Res Natl Inst Stand Technol 1999, 104:461-478.
51. Macosko C.W. Rheology: Principles, Measurements, and Applications 1994, Wiley-VCH Inc, New-York.
52. Leon-Martinez F.M., Rodriguez-Ramirez J., Medina-Torres L.L., Mendez Lagunas L.L., Bernad-Bernad M. Effects of drying conditions on the rheological properties of reconstituted mucilage solutions (Opuntia ficus-indica). Carbohydr Polym 2011, 84:439-445.
53. Rice R.W. Ceramic matrix composite toughening mechanisms: an update. Proceedings of the 9th Annual Conference on Composites and Advanced Ceramic Materials: Ceramic Engineering and Science Proceedings, Vol. 6 2008, John Wiley & Sons, Inc., Hoboken, NJ, USA, [Chapter 11]. W. Smothers (Ed.).
54. Hull D. An introduction to composite materials 1981, 154-163. Cambridge Univ. Press, Cambridge.
55. Jones R.M. Mechanics of composite materials 1975, 134-143. McGrowHill Kogakusha, Tokyo.
56. Jacobson N., Farmer S., Moore A., Sayir H. High-temperature oxidation of boron nitride. I. Monolithic boron nitride. J Am Ceram Soc 1999, 82:393-398.
57. Vinogradov N.A., Zakharov A.A., Ng M.L., Mikkelsen A., Lundgren E., Mårtensson N., et al. One-dimensional corrugation of the h-BN monolayer on Fe(110). Langmuir 2012, 28(3):1775-1781.
58. Amzallag E., Ehinon D., Martinez H., Rérat M., Baraille I. Ab initio electron energy-loss spectra and depolarization effects: Application to carbon nanotubes. Int J Quantum Chem 2012, 112:2171-2184.
59. Da Fontoura Costa L., Oliveira O.N., Travieso G., Rodrigues F.A., Villas Boas P.R., Antiqueira L., et al. Analyzing and modeling real-world phenomena with complex networks: a survey of applications. Adv Phys 2011, 60(3):329-412.
60. Duclaux L., Nysten B., Issi J.-P., Moore A.W. Structure and low-temperature thermal conductivity of pyrolytic boron nitride. Phys Rev B 1992, 46:3362-3367.
61. Sichel E.K., Miller R.E., Abrahams M.S., Buiocchi C.J. Heat capacity and thermal conductivity of hexagonal pyrolytic boron nitride. Phys Rev B 1976, 13:4607-4611.
62. 2 additive. Sci Sintering 2004, 36:3-10.
63. Kume S., Yamada I., Watari K., Harada I., Mitsuishi K. High-thermal-conductivity AlN filler for polymer/ceramic composites. J Am Ceram Soc 2009, 92:S153-S156.
64. McDonald R.A., Stull D.R. The heat content and heat capacity of boron nitride from 298 to 1689K. J Phys Chem 1961, 65:1918-2018.
65. Hubacek M., Ueki M. Effect of the orientation of boron nitride grains on the physical properties of hot-pressed ceramics. J Am Ceram Soc 1999, 82:156-160.
66. Luo R., Liu T., Li J., Zhang H., Chen Z., Tian G. Thermophysical properties of carbon/carbon composites and physical mechanism of thermal expansion and thermal conductivity. Carbon 2004, 42:2887-2895.
67. Wu X., Du G., Fang M., Mei L. Microstructure and electrical resistivity of carbon/carbon composites prepared by thermal gradient chemical vapor infiltration. J Reinf Plast Compos 2012, 31:837-844.
68. Pike G.E., Seager C.H. Percolation and conductivity: a computer study. Phys Rev B 1974, 10:1421-1434.
69. Lee S.M. International encyclopedia of composites 1990, New York.
70. Tomadakis Manolis M., Sotirchos Stratis V. Transport properties of random arrays of freely overlapping cylinders with various orientation distributions. J Chem Phys 1993, 98:616-626.