Porosity and microstructure in P/M alloys: Critical review of their effects on fatigue and fatigue crack growth

Advances in Powder Metallurgy and Particulate Materials - 2005, Proceedings of the 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005

Volumn , Issue , 2005, Pages 90-110

  Lados, Diana A ^a   Apelian, Diran ^a  

^a WORCESTER POLYTECHNIC INSTITUTE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FATIGUE CHARACTERISTICS; FATIGUE CRACK GROWTH BEHAVIOR; FATIGUE CRACK GROWTH MECHANISM; FUNDAMENTAL STUDIES; MATRIX MICROSTRUCTURE; MICROSTRUCTURAL PHASIS; MICROSTRUCTURE EFFECTS; SMALL CRACK GROWTH;

ALLOYS; CERIUM ALLOYS; FATIGUE CRACK PROPAGATION; MICROSTRUCTURE; NICKEL; POROSITY; POWDER METALLURGY;

CRACKS;

EID: 84883121068     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (36)

1. L. Ledoux and C. Prioul, "Influence of Pore Morphology on the Monotonic and Cyclic Properties of Sintered Iron", Metal Powder Report, Vol. 44, 6, 1989, pp. 438-442.
2. A. Bergmark, "Influence of Density on PM Steel Fatigue Crack Initiation and Propagation", Advances in Powder Metallurgy: Proceedings of the 2001 International Conference on Powder Metallurgy and Particulate Materials, New Orleans, 2001, 10, pp. 95-102.
3. C.M. Sonsino, "Fatigue Design of Sintered Connecting Rods", Metal Powder Report, Vol. 45, 11, 1990, pp. 754-764.
4. K.D. Christian and R.M. German, "Relation between Pore Structure and Fatigue Behavior in Sintered Iron-Copper-Carbon", Int. J. Powder Matall., Vol. 31, 1, 1995, pp. 51-61.
5. H. Sychra, Einfluß der Porosität auf das Ermü dungsverhalten von Sinterwerkstoffen auf Eisenbasis, thesis, University of Vienna, Vienna, 1989.
6. B. Weiss, R. Stickler, and H. Sychra, "High-Cycle Fatigue Behavior of Iron-based PMMaterials", Metal Powder Report, Vol. 45, 3, 1990, pp. 187-192.
7. I. Bertilsson and B. Karlsson, "Dynamic Properties of Sintered Steel", Powder Metall., Vol. 30, 3, 1987, pp. 183-188.
8. I. Bertilsson and B. Karlsson, "Dynamic Properties of Phosphorus-Alloyed Sintered Steel", Metal Powder Report, Vol. 42, 4, 1987, pp. 271-274.
9. Y.T. Chen, "Fracture Toughness Testing of PM Materials", Metal Powder Report, Vol. 44, 6, 1989, pp. 425-431.
10. N.A. Fleck and R.A. Smith, "Effect of Density on Tensile Strength, Fracture Toughness, and Fatigue Crack Propagation Behavior of Sintered Steel", Powder Metall., Vol. 3, 1981, pp. 121-125.
11. P.S. DasGupta and R.A. Queeney, "Fatigue Crack Growth Rates in a Porous Metal", Int. J. Fatigue, July 1980, pp. 113-117.
12. N. Hirose, S.-I. Tanaka, T. Tanaki, and J. Asami, "The Relationship between Elastic Modulus and Porosity of Sintered Fe-Cu System Alloys", J. Jpn. Soc. Powder Powder Metall. Vol. 51, 5, 2004, pp. 315-322.
13. D.A. Gerard and D.A. Koss, "Porosity and Crack Initiation during Low Cycle Fatigue", Materials Science and Engineering, A129, 1990, pp. 77-85.
14. D.A. Gerard and D.A. Koss, "The Influence of Porosity on Short Fatigue Crack Growth at Large Strain Amplitudes", Int. J. Fatigue, Vol. 13, 4, 1991, pp. 345-352.
15. D.A. Lados and D. Apelian, "Response of Open/Closed Porosity to Density Variations in Prealloyed and Admixed Fe-Ni-Mo P/M Alloys", Advances in Powder Metallurgy: Proceedings of the 2004 International Conference on Powder Metallurgy and Particulate Materials, MPIF, 10, pp. 67-87.
16. H. Danninger, D. Spoljaric, and B. Weiss, "Microstructural Features Limiting Performance of PM Steels", Int. J. Powder Metall., Vol. 33, 4, 1997, pp. 43-53.
17. D.A. Lados and D. Apelian, "Fatigue Mechanisms in P/M Components", Internal Report - Morris Boorky Powder Metallurgy Research Center, Metal Processing Institute, Worcester Polytechnic Institute, May 2005.
18. U. Lindstedt, B. Karlsson, and R. Masini, "Influence of Porosity on Deformation and Fatigue Behavior of P/M Austenitic Stainless Steel", Int. J. Powder Metall., Vol. 33, 8, 1997, pp. 49-61.
19. K.-H. Lindner and C.M. Sonsino, "How Sintering Time and Temperature Influence Fatigue", Metal Powder Report, Vol. 49, 5, 1994, pp. 30-36.
20. P. Beiss and M. Dalgic, "Effect of Pore Structure on Bending Fatigue Strength of Sintered Steel", Advances in Powder Metallurgy: Proceedings of the 1996 International Conference on Powder Metallurgy and Particulate Materials, MPIF, Vol. 4, Part 13, pp. 249-257.
21. E.A. Sager, R.I. Stephens, and T. Prucher, "Influence of Density and Sintering Temperature on Monotonic, Cyclic, and Low Cycle Fatigue Behavior of FL4405 High Strength PM Steel", Powder Metall., Vol. 41, 2, 1998, pp. 103-108.
22. J.J. Horn, R.I. Stephens, and T. Prucher, "Influence of Density and Sintering Temperature on Fatigue Crack Growth and Fracture Toughness of FL4405 High Strength PM Steel", Powder Metall., Vol. 41, 3, 1998, pp. 205-210.
23. H. Danninger, D. Spoljaric, A. Arakil, and B. Weiss, "Mo Alloyed PM Structural Steels Prepared by Different Alloying Techniques", Advances in Powder Metallurgy: Proceedings of the 1996 International Conference on Powder Metallurgy and Particulate Materials, MPIF, Vol. 4, Part 13, pp. 177-188.
24. P. Beiss and M. Dalgic, "Structure Property Relationships in Porous Sintered Steels", Materials Chemistry and Physics, Vol. 67, 2001, pp. 37-42.
25. I. Bertilsson and B. Karlsson, Powder Metall. Int., Vol. 14, 1982, pp. 13-18.
26. D.A. Bohn, R.J. Causton, and A. Lawley, "Effect of Alloying Mode on the Microstructure and Fatigue Behavior of a P/M Fe-Ni-Cu-Mo Steel", Advances in Powder Metallurgy: Proceedings of the 1997 International Conference on Powder Metallurgy and Particulate Materials, MPIF, Vol. 2, Part 13, pp. 3-29.
27. O. Andersson and B. Lindqvist, "Benefits of Heterogeneous Structures for the Fatigue Behavior of PM Steels", Metal Powder Report, Vol. 45, 11, 1990, pp. 765-768.
28. G.B. Piotrowski, X. Deng, N. Chawla, K.S. Narasimhan, and M.L. Marucci, "Fatigue Crack Growth of Fe-0.85Mo-2Ni-0.6C Steels with a Heterogeneous Microstructure", Int. J. Powder Metall., Vol. 41, 1, 2005, pp. 31-41.
29. N. Chawla, T.F. Murphy, K.S. Narasimhan, M. Koopman, and K.K. Chawla, "Axial Fatigue Behavior of Binder-Treated versus Diffusion Alloyed Powder Metallurgy Steels", Materials Science and Engineering, A308, 2001, pp. 180-188.
30. H. Khorsand, S.M. Habibi, H. Yoozbashizade, K. Janghorban, and S.M.S. Reihani, "Investigation of Microstructure and Fatigue Properties of Low Alloy Sintered Steels by Heat Treatment", P/M Science & Technology Briefs, Vol. 4, 2, 2002, pp. 18-22.
31. K.V. Sudhakar, "Fatigue Behavior of a High Density Powder Metallurgy Steel", Int. J. Fatigue, Vol. 22, 2000, pp. 729-734.
32. K.-H. Lang, A. Neubauer, O. Vohringer, and D. Lohe, "Cyclic Properties of Differently Heat Treated PM-Steels", Proceedings of the 1998 Powder Metallurgy World Congress & Exhibition, Granada, Spain, October 18-22, 1998, pp. 231-236.
33. S. Bengtsson, "Influence of Density and Microstructure on Fatigue Properties of Warm Compacted Fe-Ni-Cu-Mo Steels", Advances in Powder Metallurgy: Proceedings of the 2000 International Conference on Powder Metallurgy and Particulate Materials, MPIF, Vol. 2, Part 6, pp. 69-80.
34. H.I. Sanderow, J.R. Spirko, and T.G. Freidhoff, "Fatigue Properties of P/M Materials: Relationship of RBF and AF Results to Material-Processing Parameters", Advances in Powder Metallurgy: Proceedings of the 1997 International Conference on Powder Metallurgy and Particulate Materials, MPIF, Vol. 2, Part 13, pp. 117-135.
35. H. Rutz, T. Murphy, and T. Cimino, "The Effect of Microstructure on Fatigue Properties of High Density Ferrous P/M Materials", Advances in Powder Metallurgy: Proceedings of the 1996 International Conference on Powder Metallurgy and Particulate Materials, MPIF, Vol. 4, Part 13, pp. 375-389.
36. F. Esper and C. Sonsino, Fatigue Design for P/M Components - Manual for Design and Production Engineers, EPMA, Shrewsbury, England, 1994.