-
1
-
-
72749106860
-
Axial-flux permanent-magnet generator for induction heating gensets
-
Jan. 2010
-
F. Caricchi, F. Maradei, G. De Donato, and F. G. Capponi, Axial-flux permanent-magnet generator for induction heating gensets, IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 128-137, Jan. 2010.
-
IEEE Trans. Ind. Electron.
, vol.57
, Issue.1
, pp. 128-137
-
-
Caricchi, F.1
Maradei, F.2
De Donato, G.3
Capponi, F.G.4
-
2
-
-
0033100044
-
Optimal choice for number of strands in a litz-wire transformer winding
-
Mar. 1999
-
C. R. Sullivan, Optimal choice for number of strands in a litz-wire transformer winding, IEEE Trans. Power Electron., vol. 14, no. 2, pp. 283- 291, Mar. 1999.
-
IEEE Trans. Power Electron.
, vol.14
, Issue.2
, pp. 283-291
-
-
Sullivan, C.R.1
-
3
-
-
0035066166
-
Computationally efficient winding loss calculation with multiple windings, arbitrary waveforms, and two-dimensional or threedimensional field geometry
-
Jan. 2001
-
C. R. Sullivan, Computationally efficient winding loss calculation with multiple windings, arbitrary waveforms, and two-dimensional or threedimensional field geometry, IEEE Trans. Power Electron., vol. 16, no. 1, pp. 142-150, Jan. 2001.
-
IEEE Trans. Power Electron.
, vol.16
, Issue.1
, pp. 142-150
-
-
Sullivan, C.R.1
-
4
-
-
0035279170
-
Cost-constrained selection of strand diameter and number in a litz-wire transformer winding
-
Mar. 2001
-
C. R. Sullivan, Cost-constrained selection of strand diameter and number in a litz-wire transformer winding, IEEE Trans. Power Electron., vol. 16, no. 2, pp. 281-288, Mar. 2001.
-
IEEE Trans. Power Electron.
, vol.16
, Issue.2
, pp. 281-288
-
-
Sullivan, C.R.1
-
5
-
-
0043160253
-
Stranded wire with uninsulated strands as a low-cost alternative to litz wire
-
Jun. 15-19
-
T. Xu and C. R. Sullivan, Stranded wire with uninsulated strands as a low-cost alternative to litz wire, in Proc. 34th Annu. IEEE Power Electron. Spec. Conf., Jun. 15-19, 2003, vol. 1, pp. 289-295.
-
(2003)
Proc. 34th Annu. IEEE Power Electron. Spec. Conf.
, vol.1
, pp. 289-295
-
-
Xu, T.1
Sullivan, C.R.2
-
6
-
-
8744250079
-
Optimization of stranded-wire windings and comparison with litz-wire on the basis of cost and loss
-
Jun. 20-25
-
T. Xu and C. R. Sullivan, Optimization of stranded-wire windings and comparison with litz-wire on the basis of cost and loss, in Proc. 35th Annu. IEEE Power Electron. Spec. Conf., Jun. 20-25, 2004, vol. 2, pp. 854-860.
-
(2004)
Proc. 35th Annu. IEEE Power Electron. Spec. Conf.
, vol.2
, pp. 854-860
-
-
Xu, T.1
Sullivan, C.R.2
-
7
-
-
64049117178
-
An equivalent complex permeability model for litz-wire windings
-
Mar./Apr. 2009
-
N. Xi and C. R. Sullivan, An equivalent complex permeability model for litz-wire windings, IEEE Trans. Ind. Appl., vol. 45, no. 2, pp. 854-860, Mar./Apr. 2009.
-
IEEE Trans. Ind. Appl.
, vol.45
, Issue.2
, pp. 854-860
-
-
Xi, N.1
Sullivan, C.R.2
-
8
-
-
8744268294
-
Simplified high-accuracy calculation of eddycurrent loss in round-wire windings
-
Jun. 20-25
-
N. Xi and C. R. Sullivan, Simplified high-accuracy calculation of eddycurrent loss in round-wire windings, in Proc. 35th Annu. IEEE Power Electron. Spec. Conf., Jun. 20-25, 2004, vol. 2, pp. 873-879.
-
(2004)
Proc. 35th Annu. IEEE Power Electron. Spec. Conf.
, vol.2
, pp. 873-879
-
-
Xi, N.1
Sullivan, C.R.2
-
9
-
-
0026911530
-
Proximity effects in coils for high frequency power applications
-
Sep. 1992
-
A. W. Lotfi, P. M. Gradzki, and F. C. Lee, Proximity effects in coils for high frequency power applications, IEEE Trans. Magn., vol. 28, no. 5, pp. 2169-2171, Sep. 1992.
-
IEEE Trans. Magn.
, vol.28
, Issue.5
, pp. 2169-2171
-
-
Lotfi, A.W.1
Gradzki, P.M.2
Lee, F.C.3
-
10
-
-
84868135401
-
Analytical optimization of solid-round wire windings
-
Mar. 2013
-
R. P. Wojda and M. K. Kazimierczuk, Analytical optimization of solid-round wire windings, IEEE Trans. Ind. Electron., vol. 60, no. 3, pp. 1033-1041, Mar. 2013.
-
IEEE Trans. Ind. Electron.
, vol.60
, Issue.3
, pp. 1033-1041
-
-
Wojda, R.P.1
Kazimierczuk, M.K.2
-
11
-
-
33746874407
-
Frequency-dependent resistance in litz-wire planar windings for domestic induction heating appliances
-
Jul. 2006
-
J. Acero, R. Alonso, J. M. Burdio, L. A. Barragan, and D. Puyal, Frequency-dependent resistance in litz-wire planar windings for domestic induction heating appliances, IEEE Trans. Power Electron., vol. 21, no. 4, pp. 856-866, Jul. 2006.
-
IEEE Trans. Power Electron.
, vol.21
, Issue.4
, pp. 856-866
-
-
Acero, J.1
Alonso, R.2
Burdio, J.M.3
Barragan, L.A.4
Puyal, D.5
-
12
-
-
77954494763
-
Modelling of a litzwire planar winding
-
Jul. 2010
-
G. Cerri, S. A. Kovyryalov, and V. M. Primiani, Modelling of a litzwire planar winding, IET Meas. Technol. Sci., vol. 4, no. 4, pp. 214-219, Jul. 2010.
-
IET Meas. Technol. Sci.
, vol.4
, Issue.4
, pp. 214-219
-
-
Cerri, G.1
Kovyryalov, S.A.2
Primiani, V.M.3
-
13
-
-
34547420694
-
Operational experience with the world's first 3600 rpm 4 MVA generator at siemens
-
pt. 2 Jun. 2007
-
W. Nick, M. Frank, G. Klaus, J. Frauenhofer, and H.-W. Neumuller, Operational experience with the world?s first 3600 rpm 4 MVA generator at siemens, IEEE Trans. Appl. Supercond., vol. 17, pt. 2, no. 2, pp. 2030- 2033, Jun. 2007.
-
IEEE Trans. Appl. Supercond.
, vol.17
, Issue.2
, pp. 2030-2033
-
-
Nick, W.1
Frank, M.2
Klaus, G.3
Frauenhofer, J.4
Neumuller, H.-W.5
-
14
-
-
79957881096
-
Stator design for a 1000 kW HTSC motor with air-gap winding
-
pt. 2 Jun. 2011
-
D. Wua and E. Chen, Stator design for a 1000 kW HTSC motor with air-gap winding, IEEE Trans. Appl. Supercond., vol. 21, pt. 2, no. 3, pp. 1093-1096, Jun. 2011.
-
IEEE Trans. Appl. Supercond.
, vol.21
, Issue.3
, pp. 1093-1096
-
-
Wua, D.1
Chen, E.2
-
15
-
-
0026760055
-
Analytical computation of AC resistance of round and rectangular litz-wire windings
-
Jan. 1992
-
J. A. Ferreira, Analytical computation of AC resistance of round and rectangular litz-wire windings, Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 139, no. 1, pp. 21-25, Jan. 1992.
-
Proc. Inst. Elect. Eng.-Elect. Power Appl.
, vol.139
, Issue.1
, pp. 21-25
-
-
Ferreira, J.A.1
-
16
-
-
0027800885
-
A high frequency model for litz wire for switch-mode magnetics
-
Oct. 2-8
-
A. W. Lotfi and F. C. Lee, A high frequency model for litz wire for switch-mode magnetics, in Conf. Rec. IEEE IAS Annu. Meeting, Oct. 2-8, 1993, vol. 2, pp. 1169-1175.
-
(1993)
Conf. Rec. IEEE IAS Annu. Meeting
, vol.2
, pp. 1169-1175
-
-
Lotfi, A.W.1
Lee, F.C.2
-
17
-
-
0035042977
-
Accurate analytical model of winding losses in round litz-wire windings
-
pt. 2 Jan. 2001
-
F. Tourkhani and P. Viarouge, Accurate analytical model of winding losses in round litz-wire windings, IEEE Trans. Magn., vol. 37, pt. 2, no. 1, pp. 538-543, Jan. 2001.
-
IEEE Trans. Magn.
, vol.37
, Issue.1
, pp. 538-543
-
-
Tourkhani, F.1
Viarouge, P.2
-
18
-
-
84865843770
-
Winding resistance of litz-wire and multi-strand inductors
-
Feb. 2012
-
R. P.Wojda and M. K. Kazimierczuk, Winding resistance of litz-wire and multi-strand inductors, IET Power Electron., vol. 5, no. 2, pp. 257-268, Feb. 2012.
-
IET Power Electron.
, vol.5
, Issue.2
, pp. 257-268
-
-
Wojda, R.1
Kazimierczuk, M.K.2
-
20
-
-
0029746862
-
Modeling litz-wire winding losses in high-frequency power inductors
-
Baveno, Italy, Jun. 23-27
-
M. Bartoli, N. Noferi, A. Reatti, and M. K. Kazimierczuk, Modeling litz-wire winding losses in high-frequency power inductors, in Proc. IEEE Power Electron. Spec. Conf., Baveno, Italy, Jun. 23-27, 1996, pp. 1690-1696.
-
(1996)
Proc. IEEE Power Electron. Spec. Conf
, pp. 1690-1696
-
-
Bartoli, M.1
Noferi, N.2
Reatti, A.3
Kazimierczuk, M.K.4
-
21
-
-
84865843770
-
Winding resistance of litz-wire and multi-strand inductors
-
Feb. 2012
-
R. P.Wojda and M. K. Kazimierczuk, Winding resistance of litz-wire and multi-strand inductors, IET Power Electron., vol. 5, no. 2, pp. 257-268, Feb. 2012.
-
IET Power Electron.
, vol.5
, Issue.2
, pp. 257-268
-
-
Wojda, R.P.1
Kazimierczuk, M.K.2
-
22
-
-
0003190578
-
Effects of eddy currents in transformer winding
-
Aug. 1966
-
P. L. Dowell, Effects of eddy currents in transformer winding, Proc. Inst. Elect. Eng., vol. 113, no. 8, pp. 1387-1394, Aug. 1966.
-
Proc. Inst. Elect. Eng.
, vol.113
, Issue.8
, pp. 1387-1394
-
-
Dowell, P.L.1
-
23
-
-
80054798977
-
Contribution of end-winding proximity losses to temperature variation in electromagnetic devices
-
Feb. 2012
-
R. Wrobel, A. Mlot, and P. H. Mellor, Contribution of end-winding proximity losses to temperature variation in electromagnetic devices, IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 848-857, Feb. 2012.
-
IEEE Trans. Ind. Electron.
, vol.59
, Issue.2
, pp. 848-857
-
-
Wrobel, R.1
Mlot, A.2
Mellor, P.H.3
-
24
-
-
77954856967
-
Homogenization of form-wound windings in frequency and time domain finite-elementmodeling of electrical machines
-
Aug. 2010
-
J. Gyselinck, P. Dular, N. Sadowski, P. Kuo-Peng, and R. V. Sabariego, Homogenization of form-wound windings in frequency and time domain finite-elementmodeling of electrical machines, IEEE Trans.Magn., vol. 46, no. 8, pp. 2852-2855, Aug. 2010.
-
IEEE Trans.Magn.
, vol.46
, Issue.8
, pp. 2852-2855
-
-
Gyselinck, J.1
Dular, P.2
Sadowski, N.3
Kuo-Peng, P.4
Sabariego, R.V.5
-
25
-
-
68549126958
-
High-frequency copper losses in magnetic components with layered windings
-
Aug. 2009
-
G. S. Dimitrakakis and E. C. Tatakis, High-frequency copper losses in magnetic components with layered windings, IEEE Trans. Magn., vol. 45, no. 8, pp. 3187-3199, Aug. 2009.
-
IEEE Trans. Magn.
, vol.45
, Issue.8
, pp. 3187-3199
-
-
Dimitrakakis, G.S.1
Tatakis, E.C.2
-
26
-
-
84882759993
-
-
Von Roll 2012 [Online]. Available
-
Von Roll 2012. [Online]. Available: http://www.vonroll.ch/media/files/ downloads/brochures/Wire-US-20120516.pdf
-
-
-
-
27
-
-
0033184320
-
Estimation of magnetic loss in an induction motor fed with sinusoidal supply using a finite element software and a new approach to dynamic hysteresis
-
Sep. 1999.
-
T. Chevalier, A. Kedous-Labouc, B. Cornut, and C. Cester, Estimation of magnetic loss in an induction motor fed with sinusoidal supply using a finite element software and a new approach to dynamic hysteresis, IEEE Trans. Magn., vol. 35, no. 5, pp. 3400-3402, Sep. 1999.
-
IEEE Trans. Magn.
, vol.35
, Issue.5
, pp. 3400-3402
-
-
Chevalier, T.1
Kedous-Labouc, A.2
Cornut, B.3
Cester, C.4
|