SCOPUS 정보 검색 플랫폼 - 논문 보기

메뉴 건너뛰기

Polymer Science - Series B

Volumn 55, Issue 7-8, 2013, Pages 430-452

A review on synthesis of value added products from polyethylene terephthalate (PET) waste

(2) Dutt, Krishna a Soni, R K b

a UNIVERSITY OF DELHI (India)

b CH CHARAN SINGH UNIVERSITY (India)

Author keywords

[No Author keywords available]

Indexed keywords

CHEMICAL RECYCLING; ECONOMICALLY VIABLE; PET WASTE; POLYETHYLENE TEREPHTHALATES (PET); RELIABLE METHODS; RESEARCH PAPERS; VALUE ADDED PRODUCTS;

MATERIALS SCIENCE; POLYMERS;

RECYCLING;

EID: 84882689635 PISSN: 15600904 EISSN: None Source Type: Journal
DOI: 10.1134/S1560090413070075 Document Type: Review

Times cited : (74)

References (235)

1
- 84882651425
- M. A. John, Cleaning up the Waste Stream: Recycling Plastics (WM2, Univ. of Missouri, 1993).
- (1993) Cleaning Up the Waste Stream: Recycling Plastics
- John, M.A.¹

2
- 0003400331
- Wiley New York
- J. Y. Jadhav and S. W. Kantoi, in Encyclopedia of Polymer Science and Engineering (Wiley, New York, 1986), Vol. 12, p. 217.
- (1986) Encyclopedia of Polymer Science and Engineering , pp. 217
- Jadhav, J.Y.¹ Kantoi, S.W.²

3
- 84882710619
- It Starts with a Little Imagination (Dupont Magazine, www.Dupont.com, November/December 1996).
- It Starts with A Little Imagination (Dupont Magazine, November/December 1996)

4
- 84882726887
- 10.1021/cen-v076n030.p033
- P. M. Morse, Chem. Eng. News 76(30), 33 (1998).
- (1998) Chem. Eng. News , vol.76 , Issue.30 , pp. 33
- Morse, P.M.¹

5
- 0003468267
- M. C. Cann and M. E. Connelly, in Real-World Cases in Green Chemistry (American Chemical Society, 2000).
- (2000) Real-World Cases in Green Chemistry
- Cann, M.C.¹ Connelly, M.E.²

6
- 84882631772
- J. Hunt, Petroleum and Its Products (W. H. Freeman, 1996), Chap. 3.
- (1996) Petroleum and Its Products
- Hunt, J.¹

7
- 84882628600
- (American Petroleum Institute, accessed August 2000)
- Facts and Figures on Oil (American Petroleum Institute, www.api.org/faqs, accessed August 2000).
- Facts and Figures on Oil

8
- 84882673023
- American Petroleum Institute accessed August 2000
- What a Barrel of Oil Makes (American Petroleum Institute, www.api.org/edu/factsoil.htm#barrel, accessed August 2000).
- What A Barrel of Oil Makes

9
- 0003982332
- British Petroleum Company accessed July 2000
- Statistical Review of World Energy (British Petroleum Company, www.bp.com/world energy/, accessed July 2000).
- Statistical Review of World Energy

10
- 84882642213
- Facts and Figures for the Chemical Industry
- June 26 (2000)
- Facts and Figures for the Chemical Industry, Chem. Eng. News, June 26 (2000).
- Chem. Eng. News

11
- 84882605887
- accessed July 2000
- Chemical Profile of p-Xylene (Fobchemicals.com: at www.chemexpo.com/news/ PROFILE980515.cfm, accessed July 2000).
- Chemical Profile of P-Xylene

12
- 0003751350
- A. J. Kent, Riegel's Handbook of Industrial Chemistry (Van Nostrand Reinhold, 1983).
- (1983) Riegel's Handbook of Industrial Chemistry
- Kent, A.J.¹

13
- 0004265513
- G. T. Austin, Shreve's Chemical Process Industries (McGraw-Hill Book, 1984).
- (1984) Shreve's Chemical Process Industries
- Austin, G.T.¹

14
- 0003694679
- P. J. Chenier, Survey of Industrial Chemistry (VCH, 1992).
- (1992) Survey of Industrial Chemistry
- Chenier, P.J.¹

15
- 84882701308
- accessed July 2000
- PET Facts, National Association for PET Container Resources (www.napcor.com/toolbox/funfacts.html, accessed July 2000).
- PET Facts, National Association for PET Container Resources

16
- 84882638269
- accessed July 2000
- The Petretec Process of Dupont: A Nominee for a 1997 Presidential Green Chemistry Challenge Award (www.epa.gov/greenchemistry, accessed July 2000).
- The Petretec Process of Dupont: A Nominee for A 1997 Presidential Green Chemistry Challenge Award

17
- 84882731954
- Ed. by J. Walling and R. L. Walling (Brookfield, 1996)
- R. Michel, in Proceedings of ARC'96 Technology Spark Recycling Conference, SPE, Ed. by J. Walling and R. L. Walling (Brookfield, 1996), p. 349.
- Proceedings of ARC'96 Technology Spark Recycling Conference, SPE , pp. 349
- Michel, R.¹

18
- 84882646610
- R. Michel, P. Jones and D. Everhart, A Proposal Submitted to the Presidential Green Chemistry Challenge Awards Program (1997).
- (1997) A Proposal Submitted to the Presidential Green Chemistry Challenge Awards Program
- Michel, R.¹ Jones, P.² Everhart, D.³

19
- 84882637874
- Eur. Patent No. 484963
- R. E. Michel, Eur. Patent No. 484963 (1992).
- (1992)
- Michel, R.E.¹

20
- 84882569074
- US Patent No. 5391263
- R. R. Hepner and R. E. Michel, US Patent No. 5391263 (1995).
- (1995)
- Hepner, R.R.¹ Michel, R.E.²

21
- 84882691148
- US Patent No. 5504122
- R. E. Michel, US Patent No. 5504122 (1996).
- (1996)
- Michel, R.E.¹

22
- 0001206490
- 1:CAS:528:DyaF3sXksVyku7Y%3D
- P. G. Schmidt, J. Polym. Sci., Part A 1, 1271 (1963).
- (1963) J. Polym. Sci., Part A , vol.1 , pp. 1271
- Schmidt, P.G.¹

23
- 84882610186
- 10.1002/app.1959.070020514
- J. E. Jhonson, J. Appl. Polym. Sci. 2, 205 (2003).
- (2003) J. Appl. Polym. Sci. , vol.2 , pp. 205
- Jhonson, J.E.¹

24
- 84882579928
- M. A. Hughes and J. I. B. DeGroot, Transl. Chem. E 71A, 127 (1995).
- (1995) Transl. Chem. e , vol.71 , pp. 127
- Hughes, M.A.¹ Degroot, J.I.B.²

25
- 0033208203
- 10.1002/(SICI)1099-1581(199910)10:10<607: AID-PAT926>3.0.CO;2-C
- D. N. Tzankova and F. P. La Mantia, Polym. Adv. Technol. 10, 607 (1999).
- (1999) Polym. Adv. Technol. , vol.10 , pp. 607
- Tzankova, D.N.¹ La Mantia, F.P.²

26
- 0035445522
- 1:CAS:528:DC%2BD3MXnsVequrk%3D 10.1002/pat.147
- N. T. Dintcheva, F. P. La Mantia, F. Trotta, M. P. Luda, G. Camino, M. Paci, L. Di Maio, and D. Acierno, Polym. Adv. Technol. 12, 552 (2001).
- (2001) Polym. Adv. Technol. , vol.12 , pp. 552
- Dintcheva, N.T.¹ La Mantia, F.P.² Trotta, F.³ Luda, M.P.⁴ Camino, G.⁵ Paci, M.⁶ Di Maio, L.⁷ Acierno, D.⁸

27
- 0029378798
- 1:CAS:528:DyaK2MXnt1yisLs%3D 10.1002/adv.1995.060140307
- J. G. Poulakis and C. D. Papaspyrides, Adv. Polym. Technol. 14, 237 (1995).
- (1995) Adv. Polym. Technol. , vol.14 , pp. 237
- Poulakis, J.G.¹ Papaspyrides, C.D.²

28
- 84882671367
- US Patent No. 5399433
- R. W. Kobler, US Patent No. 5399433 (1995).
- (1995)
- Kobler, R.W.¹

29
- 84882719461
- US Patent No. 5653867
- B. J. Jody, B. Arman, D. E. Karvelas, J. A. Pomykala,Jr., and J. Daniels, US Patent No. 5653867 (1997).
- (1997)
- Jody, B.J.¹ Arman, B.² Karvelas, D.E.³ Pomykala Jr., J.A.⁴ Daniels, J.⁵

30
- 84882643470
- A. Tukker, Rapra Rev. Rep. 13(4), Rep. 148 (2002).
- (2002) Rapra Rev. Rep. , vol.13 , Issue.4

31
- 84882586448
- US Patent No. 6770680
- K. Klenk and A. G. Krones, US Patent No. 6770680 (2004).
- (2004)
- Klenk, K.¹ Krones, A.G.²

32
- 0031117869
- 1:CAS:528:DyaK2sXhslGhs7Y%3D 10.1021/ie960563c
- D. Paszun and T. Spychaj, Ind. Chem. Res. 36, 1373 (1997).
- (1997) Ind. Chem. Res. , vol.36 , pp. 1373
- Paszun, D.¹ Spychaj, T.²

33
- 84882667058
- Pat. Appl. No. 310565, Poland
- T. Spychaj and D. Paszun, Pat. Appl. No. 310565, Poland (1995).
- (1995)
- Spychaj, T.¹ Paszun, D.²

34
- 0029703844
- 1:CAS:528:DyaK28XmtFOmsrY%3D
- M. Toselli, M. Impagnatiello, C. Stramigioli, F. Pilati, G. Mazzoli, and G. Benuzzi, Polym. Recycl. 2, 27 (1996).
- (1996) Polym. Recycl. , vol.2 , pp. 27
- Toselli, M.¹ Impagnatiello, M.² Stramigioli, C.³ Pilati, F.⁴ Mazzoli, G.⁵ Benuzzi, G.⁶

35
- 0027886945
- 1:CAS:528:DyaK2cXls1Slsw%3D%3D 10.1002/app.1993.070501213
- I. Karayannidis, P. George, D. E. Kokkalas, and D. N. Bikiaris, J. Appl. Polym. Sci. 50, 2135 (1993).
- (1993) J. Appl. Polym. Sci. , vol.50 , pp. 2135
- Karayannidis, I.¹ George, P.² Kokkalas, D.E.³ Bikiaris, D.N.⁴

36
- 0003113468
- S. Shelley, K. Fouhy, and S. Moore, Chem. Eng. 99, 30 (1992).
- (1992) Chem. Eng. , vol.99 , pp. 30
- Shelley, S.¹ Fouhy, K.² Moore, S.³

37
- 84882694467
- DuPont, Booklet Information (1992).
- (1992) DuPont, Booklet Information

38
- 84882703782
- Jpn. Appl. No. 06.248,646
- A. Fujita, M. Sato, and M. Murakami, Jpn. Appl. No. 06.248,646 (1985).
- (1985)
- Fujita, A.¹ Sato, M.² Murakami, M.³

39
- 84882673277
- US Patent No. 4609680
- A. Fujita, M. Sato and M. Murakami, US Patent No. 4609680 (1986).
- (1986)
- Fujita, A.¹ Sato, M.² Murakami, M.³

40
- 0026136740
- 1:CAS:528:DyaK3MXmtV2lsr0%3D
- P. L. Johnson and D. Teeters. Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) 32, 144 (1991).
- (1991) Polym. Prepr. (Am. Chem. Soc., Div. Polym. Chem.) , vol.32 , pp. 144
- Johnson, P.L.¹ Teeters, D.²

41
- 0024657150
- 1:CAS:528:DyaL1MXksFyntLY%3D 10.1002/pola.1989.080270625
- S. Baliga and W. T. Wong, J. Polym. Sci., Part A: Polym. Chem. 27, 2071 (1989).
- (1989) J. Polym. Sci., Part A: Polym. Chem. , vol.27 , pp. 2071
- Baliga, S.¹ Wong, W.T.²

42
- 0026118646
- 1:CAS:528:DyaK3MXhsVCiu7o%3D 10.1002/app.1991.070420603
- J. Y. Chen, Y. C. Ou, and C. C. Lin, J. Appl. Polym. Sci. 42, 1501 (1991).
- (1991) J. Appl. Polym. Sci. , vol.42 , pp. 1501
- Chen, J.Y.¹ Ou, Y.C.² Lin, C.C.³

43
- 84882604907
- US Patent No. 4605762
- J. W. Mandoki, US Patent No. 4605762 (1986).
- (1986)
- Mandoki, J.W.¹

44
- 84882723396
- N. A Nevrekar and N. S. Sheth, Man-Made Text. India 33(7) (1990).
- (1990) Man-Made Text. India , vol.33 , Issue.7

45
- 84882576302
- W. Kaminsky, ACS Symp. Ser., Vol. 513 (1992).
- (1992) ACS Symp. Ser. , vol.513
- Kaminsky, W.¹

46
- 84882603428
- K. Tippmer, Erdol Erdgas Kohle, 111(4) (1995).
- (1995) Erdol Erdgas Kohle , vol.111 , Issue.4

47
- 80051579684
- 1:CAS:528:DyaK3sXhsVyrt74%3D
- A. Miyake, K. Kimura, Prima Daijesuto 45, 6 (1993).
- (1993) K. Kimura, Prima Daijesuto , vol.45 , pp. 6
- Miyake, A.¹

48
- 0038535499
- D. Paszun, T. Spychaj, and N. Nowaczek, Ekoplast 1, 259 (1993).
- (1993) Ekoplast , vol.1 , pp. 259
- Paszun, D.¹ Spychaj, T.² Nowaczek, N.³

49
- 77956252032
- 1:CAS:528:DC%2BC3cXovVCmsr0%3D
- R. K. Soni, M. Teotia, and K. Dutt, J. Appl. Polym. Sci. 118, 638 (2010).
- (2010) J. Appl. Polym. Sci. , vol.118 , pp. 638
- Soni, R.K.¹ Teotia, M.² Dutt, K.³

50
- 1542717116
- Szczecin-Miedzyzdroje
- P. Penczek and R. Ostrysz, in Proceedings of the National Conference on Polymers, Environment Recycling, Szczecin-Miedzyzdroje, 1995, p. 278.
- (1995) Proceedings of the National Conference on Polymers, Environment Recycling , pp. 278
- Penczek, P.¹ Ostrysz, R.²

51
- 0029703844
- F. Pilati, M. Toselli, A. Agostini, C. Stramigioli, M. Dinelli, and S. Balotta, Polym Recycl. 2, 27 (1996).
- (1996) Polym Recycl. , vol.2 , pp. 27
- Pilati, F.¹ Toselli, M.² Agostini, A.³ Stramigioli, C.⁴ Dinelli, M.⁵ Balotta, S.⁶

52
- 1542402627
- 1:CAS:528:DyaK38XkvFWksb8%3D
- P. Muhs, A. Plage, and H. D. Schumann, Kunststoffe 82, 289 (1992).
- (1992) Kunststoffe , vol.82 , pp. 289
- Muhs, P.¹ Plage, A.² Schumann, H.D.³

53
- 0344584462
- 1:CAS:528:DC%2BD3sXpvFyrsr4%3D 10.1065/espr2001.12.104.8
- D. Carta, G. Cao, and D. C. Angeli, Environ. Sci. Pollut. Res. Int. 10, 390 (2003).
- (2003) Environ. Sci. Pollut. Res. Int. , vol.10 , pp. 390
- Carta, D.¹ Cao, G.² Angeli, D.C.³

54
- 0003499143
- 1:CAS:528:DyaK1MXmt1Omt74%3D
- Y. Sueoka, W. Matsubara, N. Ishihara, W. Kawamura, and T. Moriya, Mitsubishi Juko Giho 36, 146 (1999).
- (1999) Mitsubishi Juko Giho , vol.36 , pp. 146
- Sueoka, Y.¹ Matsubara, W.² Ishihara, N.³ Kawamura, W.⁴ Moriya, T.⁵

55
- 84882640362
- Y. Kondo and M. Genta, in Proceedings of the 9 Symposium on Material Recycling Technology, 2001, p. 27.
- (2001) Proceedings of the 9 Symposium on Material Recycling Technology , pp. 27
- Kondo, Y.¹ Genta, M.²

56
- 84882685426
- 1:CAS:528:DyaK1MXnt1eluw%3D%3D
- M. Goto, H. Koyamoto, A. Kodama, T. Hirose, and S. Nagaoka, Plant & Process 41(2), 47 (1999).
- (1999) Plant & Process , vol.41 , Issue.2 , pp. 47
- Goto, M.¹ Koyamoto, H.² Kodama, A.³ Hirose, T.⁴ Nagaoka, S.⁵

57
- 84882678698
- JP Appl. No. S 57-53332
- A. Schoengen, JP Appl. No. S 57-53332.
- Schoengen, A.¹

58
- 84882568187
- T. Sako, in Proceedings of the Seminar on Most-Advanced Technology by NEDO (1998).
- (1998) Proceedings of the Seminar on Most-Advanced Technology by NEDO
- Sako, T.¹

59
- 84882579617
- M. Genta, F. Yano, Y. Kondo, W. Matsubara, and S. Oomoto, Mitsubishi Heavy Ind. Technol. Rev. 40(1) (2003).
- (2003) Mitsubishi Heavy Ind. Technol. Rev. , vol.40 , Issue.1

60
- 84882610294
- WO Patent No. 95-10499
- K. L. Rollick, WO Patent No. 95-10499 (1995).
- (1995)
- Rollick, K.L.¹

61
- 84882651017
- US Patent No. 5095145
- B. J. Rosen, US Patent No. 5095145 (1991).
- (1991)
- Rosen, B.J.¹

62
- 84882621346
- Eur. Patent No. 550979
- D. J. Royall and J. L. Harvie, Eur. Patent No. 550979 (1993).
- (1993)
- Royall, D.J.¹ Harvie, J.L.²

63
- 0000114413
- T. Yalcinyuva, M. R. Kamal R.A. Lai-Fook, and S. Ozgumus, Int. Polym. Process. 15(2), 37 (2000).
- (2000) Int. Polym. Process. , vol.15 , Issue.2 , pp. 37
- Yalcinyuva, T.¹ Lai-Fook, M.R.K.R.² Ozgumus, S.³

64
- 84882729001
- M. R. Kamal, R. A. Lai-Fook, and T. Yalcinyuva, in Proceedings of Society of Plastics Engineers Annual Conference ANTEC, 1994, p. 2896.
- (1994) Proceedings of Society of Plastics Engineers Annual Conference ANTEC , pp. 2896
- Kamal, M.R.¹ Lai-Fook, R.A.² Yalcinyuva, T.³

65
- 84882600265
- US Patent No. 3952053
- G. E. Brown and R. C. O'Brien, US Patent No. 3952053 (1976).
- (1976)
- Brown, G.E.¹ O'Brien, R.C.²

66
- 84882726553
- US Patent No. 5413681
- G. C. Tustin, T. M. Pell, D. A. Jenkins, and M. T. Jernigan, US Patent No. 5413681 (1995).
- (1995)
- Tustin, G.C.¹ Pell, T.M.² Jenkins, D.A.³ Jernigan, M.T.⁴

67
- 84882680033
- Indian Patent No. 163385
- N. D. Sharma, A. A. Vaidya, and P. Sharma, Indian Patent No. 163385 (1985).
- (1985)
- Sharma, N.D.¹ Vaidya, A.A.² Sharma, P.³

68
- 84882680065
- US Patent No. 4578510
- M. L. Doerr, US Patent No. 4578510 (1986).
- (1986)
- Doerr, M.L.¹

69
- 0028483515
- 1:CAS:528:DyaK2cXltlCqt78%3D 10.1002/app.1994.070530801
- J. R. Campanelli, D. G. Cooper, and M. R. Kamal, J. Appl. Polym. Sci. 53, 985 (1994).
- (1994) J. Appl. Polym. Sci. , vol.53 , pp. 985
- Campanelli, J.R.¹ Cooper, D.G.² Kamal, M.R.³

70
- 84882599063
- J. R. Campanelli, D. G. Cooper, and M. R. Kamal, in Proceedings of Society of Plastics Engineers Annual Conference ANTEC, 1992, p. 50.
- (1992) Proceedings of Society of Plastics Engineers Annual Conference ANTEC , pp. 50
- Campanelli, J.R.¹ Cooper, D.G.² Kamal, M.R.³

71
- 84882667733
- Eur. Patent No. 662466
- C. Socrate and R. Vosa, Eur. Patent No. 662466 (1995).
- (1995)
- Socrate, C.¹ Vosa, R.²

72
- 1542717139
- A. Michalski, WI Chem. 49, 144 (1987).
- (1987) WI Chem. , vol.49 , pp. 144
- Michalski, A.¹

73
- 84882732326
- Polish Patent No. 140015
- A. Michalski, Polish Patent No. 140015 (1987).
- (1987)
- Michalski, A.¹

74
- 1542717137
- A. Michalski, WI Chem. 63, 387 (1990).
- (1990) WI Chem. , vol.63 , pp. 387
- Michalski, A.¹

75
- 84882675341
- US Patent No. 4355175
- S. F. Pusztaszeri, US Patent No. 4355175 (1982).
- (1982)
- Pusztaszeri, S.F.¹

76
- 84882586585
- UK Patent No. 822834
- J. Pitat, V. Holcik, and M. Bacak, UK Patent No. 822834 (1959).
- (1959)
- Pitat, J.¹ Holcik, V.² Bacak, M.³

77
- 84882655396
- US Patent No. 5095145
- B. I. Rosen, US Patent No. 5095145 (1992).
- (1992)
- Rosen, B.I.¹

78
- 77956252032
- 1:CAS:528:DC%2BC3cXovVCmsr0%3D
- R. K. Soni, M. Teotia, and K. Dutt. J. Appl. Polym. Sci. 118, 638 (2010).
- (2010) J. Appl. Polym. Sci. , vol.118 , pp. 638
- Soni, R.K.¹ Teotia, M.² Dutt, K.³

79
- 73949104381
- 1:CAS:528:DC%2BD1MXhsF2itrvP 10.1002/app.30986
- K. Soni, M. Teotia, and K. Dutt. J. Appl. Polym. Sci. 115, 3074 (2010).
- (2010) J. Appl. Polym. Sci. , vol.115 , pp. 3074
- Soni, K.¹ Teotia, M.² Dutt, K.³

80
- 77953912752
- 1:CAS:528:DC%2BC3cXnsFSqurY%3D 10.1007/s10924-008-0106-7
- V. Sinha, M. R. Patel, and J. V. Patel, J. Polym. Environ. 18(1), 8 (2010).
- (2010) J. Polym. Environ. , vol.18 , Issue.1 , pp. 8
- Sinha, V.¹ Patel, M.R.² Patel, J.V.³

81
- 36148979660
- 1:CAS:528:DC%2BD2sXht1yltbvN 10.1007/s10965-007-9131-9
- A. Jain and R. K. Soni, J. Polym. Res. 14, 475 (2007).
- (2007) J. Polym. Res. , vol.14 , pp. 475
- Jain, A.¹ Soni, R.K.²

82
- 5644275459
- 1:CAS:528:DC%2BD2cXosVyjtrY%3D 10.1023/B:WAFO.0000044812.47185.0f
- D. S. Achilias and G. P. Karayannidis, Water, Air and Soil Pollution: Focus 4, 385 (2004).
- (2004) Water, Air and Soil Pollution: Focus , vol.4 , pp. 385
- Achilias, D.S.¹ Karayannidis, G.P.²

83
- 84882727682
- Geo-Frontiers, Austin
- Y. G. Hsuan and R M Koerner, in Proceedings of GRI-18 Conference, Geo-Frontiers, Austin, 2005.
- (2005) Proceedings of GRI-18 Conference
- Hsuan, Y.G.¹ Koerner, R.M.²

84
- 1542507472
- A. Michalski, Ekoplast 2, 52 (1993).
- (1993) Ekoplast , vol.2 , pp. 52
- Michalski, A.¹

85
- 0242594868
- 1:CAS:528:DC%2BD3sXmvVOqt7k%3D 10.1016/S0040-6031(03)00160-6
- G. Guclu, T. Yalcinyuva, S. Ozgumus, and M. Orbay, Thermochim. Acta 404, 193 (2003).
- (2003) Thermochim. Acta , vol.404 , pp. 193
- Guclu, G.¹ Yalcinyuva, T.² Ozgumus, S.³ Orbay, M.⁴

86
- 0004102963
- R. Chandra and A. Adab, Rubber and Plastic Waste: Recycling, Reuse and Future Demand (CBS, 1994).
- (1994) Rubber and Plastic Waste: Recycling, Reuse and Future Demand
- Chandra, R.¹ Adab, A.²

87
- 7744237348
- 1:CAS:528:DC%2BD2cXntlyhtrw%3D 10.1081/PPT-200030031
- A. S. Goje, S. A. Thakur, V. R. Diware, S.A. Patil, P. S. Dalwale, and S. Mishra, Polym.-Plast. Technol. Eng. 43, 1093 (2004).
- (2004) Polym.-Plast. Technol. Eng. , vol.43 , pp. 1093
- Goje, A.S.¹ Thakur, S.A.² Diware, V.R.³ Patil, S.A.⁴ Dalwale, P.S.⁵ Mishra, S.⁶

88
- 0027579159
- 10.1002/app.1993.070480309
- J. R. Campanelli, M. R. Kamal, and D. G. Cooper, J. Appl. Polym. Sci. 48, 443 (2003).
- (2003) J. Appl. Polym. Sci. , vol.48 , pp. 443
- Campanelli, J.R.¹ Kamal, M.R.² Cooper, D.G.³

89
- 0028483515
- 10.1002/app.1994.070530801
- J. R. Campanelli, D. G. Cooper, and M. R. Kamal, J. Appl. Polym. Sci. 53, 985 (2003).
- (2003) J. Appl. Polym. Sci. , vol.53 , pp. 985
- Campanelli, J.R.¹ Cooper, D.G.² Kamal, M.R.³

90
- 0242581663
- 1:CAS:528:DC%2BD3sXos1Sgtro%3D 10.1002/app.13065
- S. Mishra, V. S. Zope, and A. S. Goje, J. Appl. Polym. Sci. 90, 3305 (2003).
- (2003) J. Appl. Polym. Sci. , vol.90 , pp. 3305
- Mishra, S.¹ Zope, V.S.² Goje, A.S.³

91
- 0031343486
- 1:CAS:528:DyaK1cXosV2ltA%3D%3D 10.1016/S0141-3910(97)00086-4
- T. Masuda, Y. Miwa, A. Tamagawa, S. R. Mukai, K. Hashimoto, and Y. Ikeda, Polym. Degrad. Stab. 58, 315 (1997).
- (1997) Polym. Degrad. Stab. , vol.58 , pp. 315
- Masuda, T.¹ Miwa, Y.² Tamagawa, A.³ Mukai, S.R.⁴ Hashimoto, K.⁵ Ikeda, Y.⁶

92
- 0034746327
- 1:CAS:528:DC%2BD3cXot1Khurg%3D 10.1021/ie000592u
- T. Yoshioka, T. Motoki, and A. Okuwaki, Ind. Eng. Chem. Res. 40, 75 (2001).
- (2001) Ind. Eng. Chem. Res. , vol.40 , pp. 75
- Yoshioka, T.¹ Motoki, T.² Okuwaki, A.³

93
- 0037436657
- 1:CAS:528:DC%2BD3sXntVWrsg%3D%3D 10.1002/app.11579
- A. Kumar and R. T. Rajeswara, J. Appl. Polym. Sci. 87, 1781 (2003).
- (2003) J. Appl. Polym. Sci. , vol.87 , pp. 1781
- Kumar, A.¹ Rajeswara, R.T.²

94
- 0037286384
- 1:CAS:528:DC%2BD3sXhtlGit78%3D
- S. Mishra, V. S. Zope, and A. S. Goje, Polym.-Plast. Technol. Eng. 11, 79 (2003).
- (2003) Polym.-Plast. Technol. Eng. , vol.11 , pp. 79
- Mishra, S.¹ Zope, V.S.² Goje, A.S.³

95
- 84882580941
- US Patent No. 5371112
- D. R. Sayre, W. B. Lesney, M. Rao, and R. F. Tomko, US Patent No. 5371112 (1994).
- (1994)
- Sayre, D.R.¹ Lesney, W.B.² Rao, M.³ Tomko, R.F.⁴

96
- 84882620141
- Calendine et al., Eastman Chemicals Publication, No. N-262A (1984).
- (1984) Eastman Chemicals Publication, No. N-262A
- Calendine¹

97
- 84882565771
- Eastman Chemicals Publication No. N-292B
- Eastman Chemicals Publication, No. N-292B (1987).
- (1987)

98
- 1542402662
- N. S. Kozlov, G. P. Korotysko, A. V. Kashinskii, and N. D. Gavrilenko, Vestn. Akad. Nauk 5, 91 (1984).
- (1984) Vestn. Akad. Nauk , vol.5 , pp. 91
- Kozlov, N.S.¹ Korotysko, G.P.² Kashinskii, A.V.³ Gavrilenko, N.D.⁴

99
- 0033889294
- 10.1002/(SICI)1097-4628(20000228)75:9<1097: AID-APP2>3.0.CO;2-7
- S. R. Shukla and M. R. Mathur, J. Appl. Polym. Sci. 75, 1097 (2005).
- (2005) J. Appl. Polym. Sci. , vol.75 , pp. 1097
- Shukla, S.R.¹ Mathur, M.R.²

100
- 1542507510
- 1:CAS:528:DyaL2MXlt1Crtr8%3D
- B. Filipowska and Z. Kubacki, Przegl Wlok 39, 118 (1985).
- (1985) Przegl Wlok , vol.39 , pp. 118
- Filipowska, B.¹ Kubacki, Z.²

101
- 0035950504
- 1:CAS:528:DC%2BD3MXotlantbg%3D 10.1002/1439-2054(20011001)286:10<640: AID-MAME640>3.0.CO;2-1
- V. A. Kosmidis, D. S. Achilis, and G. P. Karayannidis, Macromol. Mater. Eng., 286, 640 (2001).
- (2001) Macromol. Mater. Eng. , vol.286 , pp. 640
- Kosmidis, V.A.¹ Achilis, D.S.² Karayannidis, G.P.³

102
- 0347541158
- 1:CAS:528:DC%2BD3sXpvVKltbo%3D
- S. Mishra, V. S. Zope, and A. S. Goje, Polym.-Plast. Technol. Eng. 11, 963 (2003).
- (2003) Polym.-Plast. Technol. Eng. , vol.11 , pp. 963
- Mishra, S.¹ Zope, V.S.² Goje, A.S.³

103
- 0026882621
- 1:CAS:528:DyaK38XktV2ltLo%3D 10.1002/app.1992.070450505
- M. J. Collins and S. H. Zeronian, J. Appl. Polym. Sci. 45, 797 (1992).
- (1992) J. Appl. Polym. Sci. , vol.45 , pp. 797
- Collins, M.J.¹ Zeronian, S.H.²

104
- 84882587129
- Eur. Patent No. 597751
- J. Benzaria, B. Durif-Varambon, F. Dawans, and J. B. Gaillard, Eur. Patent No. 597751 (1994).
- (1994)
- Benzaria, J.¹ Durif-Varambon, B.² Dawans, F.³ Gaillard, J.B.⁴

105
- 0008527196
- 1:CAS:528:DyaE3cXht1aks7k%3D
- C. G. G. Namboori, Text. Chem. Color. 1, 50 (1969).
- (1969) Text. Chem. Color. , vol.1 , pp. 50
- Namboori, C.G.G.¹

106
- 0000856801
- 1:CAS:528:DyaF1cXks1Orurc%3D 10.1002/app.1968.070120901
- C. G. G. Namboori and M. S. Haith, J. Appl. Polym. Sci. 12, 1999 (1968).
- (1968) J. Appl. Polym. Sci. , vol.12 , pp. 1999
- Namboori, C.G.G.¹ Haith, M.S.²

107
- 4244163121
- T. Sato, Melliand Textilber. 74, 291 (1993).
- (1993) Melliand Textilber. , vol.74 , pp. 291
- Sato, T.¹

108
- 0031253460
- 1:CAS:528:DyaK2sXnslGisbw%3D
- S. R. Shukla and M. R. Mathur, Am. Dyest. Reptr. 86(10), 48 (1997).
- (1997) Am. Dyest. Reptr. , vol.86 , Issue.10 , pp. 48
- Shukla, S.R.¹ Mathur, M.R.²

109
- 0025486730
- 1:CAS:528:DyaK3MXktFSlu74%3D
- N. A. Ibrahim, Am. Dyest. Reptr. 79(9), 87 (1990).
- (1990) Am. Dyest. Reptr. , vol.79 , Issue.9 , pp. 87
- Ibrahim, N.A.¹

110
- 0029107039
- S. R. Shukla, V. B. Hedaoo and A. N. Saligram, Am. Dyest. Reptr. 84(10), 40 (1995).
- (1995) Am. Dyest. Reptr. , vol.84 , Issue.10 , pp. 40
- Shukla, S.R.¹ Hedaoo, V.B.² Saligram, A.N.³

111
- 84882685880
- US Patent No. 4578502
- W. J. G. Cudmore, US Patent No. 4578502 (1986).
- (1986)
- Cudmore, W.J.G.¹

112
- 0037453784
- 1:CAS:528:DC%2BD3sXmt1yhsw%3D%3D 10.1021/ie010563z
- T. Yoshioka, M. Ota, and A. Okuwaki, Ind. Eng. Chem. Res. 42, 675 (2003).
- (2003) Ind. Eng. Chem. Res. , vol.42 , pp. 675
- Yoshioka, T.¹ Ota, M.² Okuwaki, A.³

113
- 0035135977
- 1:CAS:528:DC%2BD3cXovFaks7o%3D 10.1021/ie0005304
- B. Z. Wan, C. Y. Kao, and W. H. Cheng, Ind. Eng. Chem. Res. 40, 509 (2001).
- (2001) Ind. Eng. Chem. Res. , vol.40 , pp. 509
- Wan, B.Z.¹ Kao, C.Y.² Cheng, W.H.³

114
- 0036889336
- 10.1002/adv.10029 1:CAS:528:DC%2BD38Xotlans78%3D
- G. P. Karyannidis, A. P. Chatiavgustis, and D. S. Achilis, Adv. Polym. Technol. 21, 250 (2002).
- (2002) Adv. Polym. Technol. , vol.21 , pp. 250
- Karyannidis, G.P.¹ Chatiavgustis, A.P.² Achilis, D.S.³

115
- 84882609155
- US Patent No. 6147129
- J. A. Schwartz, US Patent No. 6147129 (2000).
- (2000)
- Schwartz, J.A.¹

116
- 84882722258
- Polish Patent No. 126009
- B. Mikolajczyk, A. Lubawy, M. Dejewska, P. Smoczynski, P. Pozniak, and H. Boebel, Polish Patent No. 126009 (1985).
- (1985)
- Mikolajczyk, B.¹ Lubawy, A.² Dejewska, M.³ Smoczynski, P.⁴ Pozniak, P.⁵ Boebel, H.⁶

117
- 84882677726
- JP Appl. No. 06-16595
- T. Morita and H. Okasaka, JP Appl. No. 06-16595 (1994).
- (1994)
- Morita, T.¹ Okasaka, H.²

118
- 31444433590
- 1:CAS:528:DC%2BD28Xot1WntA%3D%3D 10.1007/s10924-005-8711-1
- C. Lorenzetti, P. Manaresi, C. Berti, and G. Barbiroli, J. Polym. Environ. 14(1), 89 (2006).
- (2006) J. Polym. Environ. , vol.14 , Issue.1 , pp. 89
- Lorenzetti, C.¹ Manaresi, P.² Berti, C.³ Barbiroli, G.⁴

119
- 0037453784
- 1:CAS:528:DC%2BD3sXmt1yhsw%3D%3D 10.1021/ie010563z
- T. Yoshioka, M. Ota, and A. Okuwaki, Ind. Eng. Chem. Res. 42, 675 (2003).
- (2003) Ind. Eng. Chem. Res. , vol.42 , pp. 675
- Yoshioka, T.¹ Ota, M.² Okuwaki, A.³

120
- 84882676959
- US Patent No. 3403115
- H. Gruschke and W. Hammerschick, US Patent No. 3403115 (1968).
- (1968)
- Gruschke, H.¹ Hammerschick, W.²

121
- 84882701636
- US Patent No. 3, 321510
- R. Lotz, G. Wick, and C. Neuhaus, US Patent No. 3, 321510 (1967).
- (1967)
- Lotz, R.¹ Wick, G.² Neuhaus, C.³

122
- 0036132944
- 1:CAS:528:DC%2BD3MXpt1agtrw%3D 10.1016/S0141-3910(01)00217-8
- Y. Yang, Y. Lu, H. Xiang, Y. Xu, and Y. Li, Polym. Degrad. Stab. 75, 185 (2002).
- (2002) Polym. Degrad. Stab. , vol.75 , pp. 185
- Yang, Y.¹ Lu, Y.² Xiang, H.³ Xu, Y.⁴ Li, Y.⁵

123
- 84882691326
- (eds)
- Encyclopedia of Polymer Science and Engineering, Ed. by H. F. Mark (Wiley, 1987), Vol. 5, p. 117.
- (1987) Encyclopedia of Polymer Science and Engineering , pp. 117
- Mark, H.F.¹

124
- 84882580453
- R. E. Michel, Eur. Patent No. 484963 (1992).
- (1992) Eur. Patent No. 484963
- Michel, R.E.¹

125
- 0036159786
- 1:CAS:528:DC%2BD38XnsVKjsA%3D%3D 10.1002/aic.690480114
- M. Goto, H. Koyamoto, A. Kodama, T. Hirose, S. Nagaoka, and B. J. McCoy, AIChE J. 48, 136 (2002).
- (2002) AIChE J. , vol.48 , pp. 136
- Goto, M.¹ Koyamoto, H.² Kodama, A.³ Hirose, T.⁴ Nagaoka, S.⁵ McCoy, B.J.⁶

126
- 0037064901
- 1:CAS:528:DC%2BD38Xptl2nt7w%3D 10.1088/0953-8984/14/44/494
- M. Goto, H. Koyamoto, A. Kodama, T. Hirose, and S. Nagaoka, J. Phys.: Condens. Matter 14, 11427 (2002).
- (2002) J. Phys.: Condens. Matter , vol.14 , pp. 11427
- Goto, M.¹ Koyamoto, H.² Kodama, A.³ Hirose, T.⁴ Nagaoka, S.⁵

127
- 20344383711
- 1:CAS:528:DC%2BD2MXjtlGlu74%3D 10.1021/ie0488187
- M. Genta, T. Iwaya, M. Sasaki, M. Goto, and T. Hirose, Ind. Eng. Chem. Res. 44, 3894 (2005).
- (2005) Ind. Eng. Chem. Res. , vol.44 , pp. 3894
- Genta, M.¹ Iwaya, T.² Sasaki, M.³ Goto, M.⁴ Hirose, T.⁵

128
- 84882623675
- UK Patent No. 2041916
- M. N. Marathe, D. A. Dabholkar, and M. K. Jain, UK Patent No. 2041916 (1980).
- (1980)
- Marathe, M.N.¹ Dabholkar, D.A.² Jain, M.K.³

129
- 0037343725
- 1:CAS:528:DC%2BD3sXitFWnt78%3D 10.1002/pi.1147
- S. Mishra and A. S. Goje, Polym. Int. 52, 337 (2003).
- (2003) Polym. Int. , vol.52 , pp. 337
- Mishra, S.¹ Goje, A.S.²

130
- 0037230808
- 1:CAS:528:DC%2BD3sXhvFymtrg%3D 10.1016/S0141-3910(02)00370-1
- H. Kurokawa, M. Ohshima, K. Sugiyama, and H. Miura, Polym. Degrad. Stab. 79, 529 (2003).
- (2003) Polym. Degrad. Stab. , vol.79 , pp. 529
- Kurokawa, H.¹ Ohshima, M.² Sugiyama, K.³ Miura, H.⁴

131
- 84882610713
- US Patent No. 4485196
- G. P. Speranza, R. A. Grigsby, and M. E. Brennan, US Patent No. 4485196 (1984).
- (1984)
- Speranza, G.P.¹ Grigsby, R.A.² Brennan, M.E.³

132
- 0037228410
- 1:CAS:528:DC%2BD38XpslCrsrc%3D 10.1021/ed080p79
- C. J. Donahue and J. A. Exline, J. Chem. Educ. 80, 79 (2003).
- (2003) J. Chem. Educ. , vol.80 , pp. 79
- Donahue, C.J.¹ Exline, J.A.²

133
- 84882668190
- US Patent No. 5576456
- J. G. William and A. N. Andrius, US Patent No. 5576456 (1996).
- (1996)
- William, J.G.¹ Andrius, A.N.²

134
- 84882725311
- JP Appl. No. 36-52895 B2
- I. Nobuo, T. Kawamura, M. Bulk, M. Takeshi, and H. Nishida, JP Appl. No. 36-52895 B2 (2005).
- (2005)
- Nobuo, I.¹ Kawamura, T.² Bulk, M.³ Takeshi, M.⁴ Nishida, H.⁵

135
- 0028698314
- 1:CAS:528:DyaK2cXntVWnsbw%3D 10.1002/app.1994.070541115
- J. R. Campanelli, M. R. Kamal, and D. G. Cooper, J. Appl. Polym. Sci. 54, 1731 (1994).
- (1994) J. Appl. Polym. Sci. , vol.54 , pp. 1731
- Campanelli, J.R.¹ Kamal, M.R.² Cooper, D.G.³

136
- 0002307237
- 1:CAS:528:DyaK38XmtFeqsLk%3D 10.1002/masy.19920570116
- D. Gintis, Makromol. Chem., Macromol. Symp. 57, 185 (1992).
- (1992) Makromol. Chem., Macromol. Symp. , vol.57 , pp. 185
- Gintis, D.¹

137
- 0031143134
- 1:CAS:528:DyaK2sXjt1Oks78%3D 10.1023/A:1018584519173
- S. Aslan, B. Immirizi, P. Laurienzo, M. Malinconico, E. Martuscelli, M. G. Volpe, M. Pelino, and L. Savini, J. Mater. Sci. 32, 2329 (1997).
- (1997) J. Mater. Sci. , vol.32 , pp. 2329
- Aslan, S.¹ Immirizi, B.² Laurienzo, P.³ Malinconico, M.⁴ Martuscelli, E.⁵ Volpe, M.G.⁶ Pelino, M.⁷ Savini, L.⁸

138
- 84882647009
- G. A. Omrani, M. Vosoughie, and M. R. Gholami, J. Sci. Technol. 23, 1 (2005).
- (2005) J. Sci. Technol. , vol.23 , pp. 1
- Omrani, G.A.¹ Vosoughie, M.² Gholami, M.R.³

139
- 20844434826
- 1:CAS:528:DC%2BD2MXosVCgtL4%3D 10.1002/app.21769
- S. R. Shukla and A. M. Harad, J. Appl. Polym. Sci. 97, 513 (2005).
- (2005) J. Appl. Polym. Sci. , vol.97 , pp. 513
- Shukla, S.R.¹ Harad, A.M.²

140
- 0037697572
- 1:CAS:528:DC%2BD3sXjslCqu70%3D 10.1002/mame.200390034
- A. Goje and S. Mishra, Macromol. Mater. Eng. 288, 326 (2003).
- (2003) Macromol. Mater. Eng. , vol.288 , pp. 326
- Goje, A.¹ Mishra, S.²

141
- 0037035228
- 1:CAS:528:DC%2BD3sXlt1ChtQ%3D%3D 10.1002/app.11476
- S. Mishra and A. S. Goje, J. Appl. Polym. Sci. 87, 1569 (2003).
- (2003) J. Appl. Polym. Sci. , vol.87 , pp. 1569
- Mishra, S.¹ Goje, A.S.²

142
- 0141828188
- 1:CAS:528:DC%2BD3sXntFeltrk%3D
- K. Troev, G. Grancharov, R. Tsevi, and I. Gitsov, J. Appl. Polym. Sci. 90, 1148 (2003).
- (2003) J. Appl. Polym. Sci. , vol.90 , pp. 1148
- Troev, K.¹ Grancharov, G.² Tsevi, R.³ Gitsov, I.⁴

143
- 0032649426
- 1:CAS:528:DyaK1MXjt1OqtLs%3D 10.1002/(SICI)1097-4628(19990705)73:1<35: AID-APP4>3.0.CO;2-W
- Chen Jong-Wu, Chen Leo-Wang, and Leo-Wang, J. Appl. Polym. Sci. 73, 35 (1999).
- (1999) J. Appl. Polym. Sci. , vol.73 , pp. 35
- Chen, J.-W.¹ Chen, L.-W.² Leo-Wang³

144
- 0026118646
- 10.1002/app.1991.070420603
- J. Y. Chen, C. F. Ou, Y. C. Hu, and C. C. Lin, J. Appl. Polym. Sci. 42, 1501 (2003).
- (2003) J. Appl. Polym. Sci. , vol.42 , pp. 1501
- Chen, J.Y.¹ Ou, C.F.² Hu, Y.C.³ Lin, C.C.⁴

145
- 0038040776
- 1:CAS:528:DC%2BD3sXlsFeitro%3D 10.1177/0095244303035002003
- S. H. Mansour and N. E. Ikladious, J. Elast. Plast. 35, 133 (2003).
- (2003) J. Elast. Plast. , vol.35 , pp. 133
- Mansour, S.H.¹ Ikladious, N.E.²

146
- 0009573228
- 10.1016/S0040-6031(97)00060-9
- C. Y. Kao, W. H. Cheng, and B. Z. Wan, Thermochim. Acta 92, 95 (1997).
- (1997) Thermochim. Acta , vol.92 , pp. 95
- Kao, C.Y.¹ Cheng, W.H.² Wan, B.Z.³

147
- 84882623955
- D. C. Wang, L. W. Chen, and W. Y. Chiu, Angew. Makromol. Chem. 47, 230 (1995).
- (1995) Angew. Makromol. Chem. , vol.47 , pp. 230
- Wang, D.C.¹ Chen, L.W.² Chiu, W.Y.³

148
- 0037036767
- 1:CAS:528:DC%2BD38Xlt1Gksr0%3D 10.1021/ie010894b
- M. Yamaye, T. Hashime, K. Yamamoto, Y. Kosugi, and N. Cho, Ind. Eng. Chem. Res. 41, 3993 (2002).
- (2002) Ind. Eng. Chem. Res. , vol.41 , pp. 3993
- Yamaye, M.¹ Hashime, T.² Yamamoto, K.³ Kosugi, Y.⁴ Cho, N.⁵

149
- 0028698314
- 10.1002/app.1994.070541115
- J. R. Campanelli, M. R. Kamal and D. G. Cooper, J. Appl. Polym. Sci. 54, 1731 (2003).
- (2003) J. Appl. Polym. Sci. , vol.54 , pp. 1731
- Campanelli, J.R.¹ Kamal, M.R.² Cooper, D.G.³

150
- 9444240359
- 1:CAS:528:DC%2BD2cXps1Ors70%3D 10.1016/j.polymdegradstab.2004.07.017
- G. Xi, M. Lu, and C. Sun, Polym. Degrad. Stab. 87, 117 (2005).
- (2005) Polym. Degrad. Stab. , vol.87 , pp. 117
- Xi, G.¹ Lu, M.² Sun, C.³

151
- 84882634439
- US Patent No. 5602187
- M. W. Simon, US Patent No. 5602187 (1997).
- (1997)
- Simon, M.W.¹

152
- 84882623542
- US Patent No. 5912275
- S. D. Hall, R. R. Hepner, R. E. Michel, D. R. Wheatcraft, G. M. Williamson, US Patent No. 5912275 (1999).
- (1999)
- Hall, S.D.¹ Hepner, R.R.² Michel, R.E.³ Wheatcraft, D.R.⁴ Williamson, G.M.⁵

153
- 84882704836
- US Patent No. 5451611
- V. A. Chilukuri and S. Swaminathan, US Patent No. 5451611 (1995).
- (1995)
- Chilukuri, V.A.¹ Swaminathan, S.²

154
- 84882706889
- US Patent No. 6518322
- M. W. Simont, US Patent No. 6518322 (2003).
- (2003)
- Simont, M.W.¹

155
- 84882583997
- US Patent No. 5726277
- R. K. Salsman, US Patent No. 5726277 (1998).
- (1998)
- Salsman, R.K.¹

156
- 19944367023
- 1:CAS:528:DC%2BD2MXktVSrtL0%3D 10.1002/app.21502
- R. K. Soni and S. Singhi, J. Appl. Polym. Sci. 96, 1515 (2005).
- (2005) J. Appl. Polym. Sci. , vol.96 , pp. 1515
- Soni, R.K.¹ Singhi, S.²

157
- 77951457184
- 1:CAS:528:DC%2BC3cXksFSjs7Y%3D 10.1016/j.jhazmat.2010.01.092
- A. Mittal, R. K. Soni, S. Singh, and K. Dutt, J. Hazard. Mater. 178, 390 (2010).
- (2010) J. Hazard. Mater. , vol.178 , pp. 390
- Mittal, A.¹ Soni, R.K.² Singh, S.³ Dutt, K.⁴

158
- 1042274136
- 1:CAS:528:DC%2BD3MXivVGqtbs%3D
- T. Spychaj, F. Fabrycy S. Spychaj, and M. Kacperski, J. Mater. Cycles Waste Manag. 3, 24 (2001).
- (2001) J. Mater. Cycles Waste Manag. , vol.3 , pp. 24
- Spychaj, T.¹ Spychaj, F.F.S.² Kacperski, M.³

159
- 0004147981
- J. R. Overtone and T. Murayama, J. Polym. Sci., Part A 2, 1059 (1969).
- (1969) J. Polym. Sci., Part A , vol.2 , pp. 1059
- Overtone, J.R.¹ Murayama, T.²

160
- 56849095946
- 10.1080/00405168908688948
- S. H. Zeronian and M. J. Collins, Text. Prog. 20(2), 1 (1989).
- (1989) Text. Prog. , vol.20 , Issue.2 , pp. 1
- Zeronian, S.H.¹ Collins, M.J.²

161
- 0011021226
- M. W. Meszaros, Eng. Plast. 5, 335 (1992).
- (1992) Eng. Plast. , vol.5 , pp. 335
- Meszaros, M.W.¹

162
- 9744285386
- A. Kirkman and C. H. Kline, Chemtech (1991).
- (1991) Chemtech
- Kirkman, A.¹ Kline, C.H.²

163
- 67149099139
- 1:CAS:528:DC%2BD1MXltl2quro%3D 10.1002/app.29842
- R. K. Soni, K. Dutt, A. Jain, S. Soam, and S. Singh, J. Appl. Polym. Sci. 113, 1090 (2009).
- (2009) J. Appl. Polym. Sci. , vol.113 , pp. 1090
- Soni, R.K.¹ Dutt, K.² Jain, A.³ Soam, S.⁴ Singh, S.⁵

164
- 84882686338
- K. P. Blackmon, D. W. Fox, and S. J. Shafer, Eur. Patent No. 365842 (1988).
- (1988) Eur. Patent No. 365842
- Blackmon, K.P.¹ Fox, D.W.² Shafer, S.J.³

165
- 85027926362
- 1:CAS:528:DC%2BC38Xms1ektrk%3D 10.1002/app.37900
- R. V. Shah, B. S. Borude, S. R. Shukla, J. Appl. Polym. Sci. 127, 323 (2013).
- (2013) B. S. Borude, S. R. Shukla, J. Appl. Polym. Sci. , vol.127 , pp. 323
- Shah, R.V.¹

166
- 0026205838
- 10.1080/00222339108054056
- M. J. Collins, S. H. Zeronian, and M. L. Marshall, J. Macromol. Sci. A 28, 775 (1991).
- (1991) J. Macromol. Sci. A , vol.28 , pp. 775
- Collins, M.J.¹ Zeronian, S.H.² Marshall, M.L.³

167
- 0019899786
- 1:CAS:528:DyaL38Xos1ylsQ%3D%3D 10.1002/app.1982.070270126
- M. S. Ellison, L. D. Fisher, K. W. Alger, and S. H. Zeronian, J. Appl. Polym. Sci. 27, 247 (1982).
- (1982) J. Appl. Polym. Sci. , vol.27 , pp. 247
- Ellison, M.S.¹ Fisher, L.D.² Alger, K.W.³ Zeronian, S.H.⁴

168
- 0002349452
- 1:CAS:528:DyaF3sXmtVSqtA%3D%3D 10.1016/0032-3861(62)90062-9
- G. Farrow, D. A. S. Ravens, and I. M. Ward, Polymer 3, 17 (1962).
- (1962) Polymer , vol.3 , pp. 17
- Farrow, G.¹ Ravens, D.A.S.² Ward, I.M.³

169
- 0024072730
- 1:CAS:528:DyaL1cXlvFWjsb8%3D 10.1002/app.1988.070360716
- V. A. Popoola, J. Appl. Polym. Sci. 36, 1677 (1988).
- (1988) J. Appl. Polym. Sci. , vol.36 , pp. 1677
- Popoola, V.A.¹

170
- 84882651568
- US Patent No. 4973746
- P. B. Kenneth, W. F. Daniel, and S. Shafer, US Patent No. 4973746 (1990).
- (1990)
- Kenneth, P.B.¹ Daniel, W.F.² Shafer, S.³

171
- 84882695778
- Plasticsresource.com
- Advanced Recycling, Plasticsresource.com (2005).
- (2005) Advanced Recycling

172
- 20344380629
- 10.1021/je60001a009
- M. W. McMahan, H. A. Bridsall, G. R. Johnson, and C. T. Camilli, J. Chem. Eng. Data 4, 57 (1959).
- (1959) J. Chem. Eng. Data , vol.4 , pp. 57
- McMahan, M.W.¹ Bridsall, H.A.² Johnson, G.R.³ Camilli, C.T.⁴

173
- 0000585913
- L. H. Buxbaum, Angew. Chem. 7, 182 (2003).
- (2003) Angew. Chem. , vol.7 , pp. 182
- Buxbaum, L.H.¹

174
- 0009474245
- 10.1590/S1516-14391999000100006
- D. M. Sandro and M. Zanin, Mater. Res. 2, 33 (1999).
- (1999) Mater. Res. , vol.2 , pp. 33
- Sandro, D.M.¹ Zanin, M.²

175
- 84882692405
- Polish Patent No. 151346
- J. Polaczek, J. Pielichowski, Z. Lisicki, R. Chrzaszcz, M. Kowalska, and Z. Florsch, Polish Patent No. 151346 (1987).
- (1987)
- Polaczek, J.¹ Pielichowski, J.² Lisicki, Z.³ Chrzaszcz, R.⁴ Kowalska, M.⁵ Florsch, Z.⁶

176
- 4244219182
- 10.1016/S0165-2370(97)00048-X
- E. A. William and P. T. William, J. Anal. Appl. Pyrolysis 40-41, 347 (1997).
- (1997) J. Anal. Appl. Pyrolysis , vol.40-41 , pp. 347
- William, E.A.¹ William, P.T.²

177
- 14644411299
- Calvin Woodings (Calvin Woodings, UK, Magazines Online, NF New Fibres)
- Calvin Woodings, New Developments in Biodegradable Nonwovens (Calvin Woodings, UK, Magazines Online, NF New Fibres).
- New Developments in Biodegradable Nonwovens

178
- 3042660183
- 1:CAS:528:DC%2BD2cXkvFOrt74%3D 10.1002/app.20556
- J. Zhang, X. Wang, J. Gong, and Z. Gu, J. Appl. Polym. Sci. 93, 1089 (2004).
- (2004) J. Appl. Polym. Sci. , vol.93 , pp. 1089
- Zhang, J.¹ Wang, X.² Gong, J.³ Gu, Z.⁴

179
- 0345711593
- 1:CAS:528:DyaK1MXjt1yqt7c%3D 10.1002/(SICI)1097-0126(199905)48:5<346: AID-PI156>3.0.CO;2-N
- D. Kint and G. S. Munoz, Polym. Int. 48, 346 (1999).
- (1999) Polym. Int. , vol.48 , pp. 346
- Kint, D.¹ Munoz, G.S.²

180
- 84882645695
- US Patent No. 6730709
- H. Itoh and K. Fujioka, US Patent No. 6730709 (2004).
- (2004)
- Itoh, H.¹ Fujioka, K.²

181
- 0031294476
- M. Malinconico, M. G. Volpe, and F. Pota, Polymer Recycl. 3, 281 (1997/1998).
- (1997) Polymer Recycl. , vol.3 , pp. 281
- Malinconico, M.¹ Volpe, M.G.² Pota, F.³

182
- 73949153656
- 1:CAS:528:DC%2BD3cXhs1ynsrg%3D
- Lim et al., J. Korean Fiber Soc. 37, 1 (2000).
- (2000) J. Korean Fiber Soc. , vol.37 , pp. 1
- Lim¹

183
- 0031488102
- 1:CAS:528:DyaK2sXlt1yjtLc%3D 10.1002/masy.19971180195
- E. S. Yoo, S. S. Im, and Y. Yoo, Macromol Symp. 118, 739 (1997).
- (1997) Macromol Symp. , vol.118 , pp. 739
- Yoo, E.S.¹ Im, S.S.² Yoo, Y.³

184
- 0019525427
- 1:CAS:528:DyaL3MXhslGqs7s%3D 10.1002/app.1981.070260206
- Y. Tokiwa, T. Suzuki, and T. Ando, J. Appl. Polym. Sci. 26, 441 (1981).
- (1981) J. Appl. Polym. Sci. , vol.26 , pp. 441
- Tokiwa, Y.¹ Suzuki, T.² Ando, T.³

185
- 0034497462
- 1:CAS:528:DC%2BD3cXos1Squ78%3D 10.1002/1099-0518(20001215)38:24<4478: AID-POLA170>3.0.CO;2-A
- Y. Maeda, T. Maeda, K. Yamaguchi, S. Kubota, A. Nakayama, N. Kawasaki, N. Yamamoto and S. Aiba, J. Polym. Sci., Part A: Polym. Chem. 38, 4478 (2000).
- (2000) J. Polym. Sci., Part A: Polym. Chem. , vol.38 , pp. 4478
- Maeda, Y.¹ Maeda, T.² Yamaguchi, K.³ Kubota, S.⁴ Nakayama, A.⁵ Kawasaki, N.⁶ Yamamoto, N.⁷ Aiba, S.⁸

186
- 0023397126
- 10.1002/jbm.820210805
- R. Smith, C. Oliver, and D. F. Williams, J. Biomed. Mater. Res. 21, 991 (2004).
- (2004) J. Biomed. Mater. Res. , vol.21 , pp. 991
- Smith, R.¹ Oliver, C.² Williams, D.F.³

187
- 18944392095
- 1:CAS:528:DC%2BD2MXksF2jsr8%3D 10.1002/pi.1794
- S. Shukla and E. Lofgren, Polym. Int. 54, 946 (2005).
- (2005) Polym. Int. , vol.54 , pp. 946
- Shukla, S.¹ Lofgren, E.²

188
- 30144439638
- 1:CAS:528:DC%2BD28Xhs1OjtQ%3D%3D 10.1016/j.polymdegradstab.2005.05.014
- M. S. Marques-Calvo, M. Cerda-Cuellar, D. P. R. Kint, J. J. Bou, and S. Munoz-Guerra, Polymer Degrad. Stab. 91, 663 (2006).
- (2006) Polymer Degrad. Stab. , vol.91 , pp. 663
- Marques-Calvo, M.S.¹ Cerda-Cuellar, M.² Kint, D.P.R.³ Bou, J.J.⁴ Munoz-Guerra, S.⁵

189
- 84882599083
- T. A. Dickneider and T. A. Petretec, Dupont's Technology for Polyester Regeneration (A Green Chemistry Module, accessed June 2011; http://academic. scranton.edu/faculty/CANNM1/industrial.html)
- (2011) Dupont's Technology for Polyester Regeneration
- Dickneider, T.A.¹ Petretec, T.A.²

190
- 0021410903
- T. Suebsaeng, C. A. Wilkie, V. T. Burger, J. Carter, and C. E. Brown, J. Polym. Sci., Part A: Polym. Chem. 22, 945 (2003).
- (2003) J. Polym. Sci., Part A: Polym. Chem. , vol.22 , pp. 945
- Suebsaeng, T.¹ Wilkie, C.A.² Burger, V.T.³ Carter, J.⁴ Brown, C.E.⁵

191
- 84882675237
- V. K. H. Redpenning, VGB Kraftwerkstech. 74(8) (1994).
- (1994) VGB Kraftwerkstech. , vol.74 , Issue.8

192
- 0028549767
- 1:CAS:528:DyaK2cXmtlCgt7c%3D 10.1021/ef00048a010
- M. M. Taghiei, Z. Feng, F. E. Huggins, and G. P Huffmann, Energy Fuels 8, 1228 (1994).
- (1994) Energy Fuels , vol.8 , pp. 1228
- Taghiei, M.M.¹ Feng, Z.² Huggins, F.E.³ Huffmann, G.P.⁴

193
- 0001032406
- 1:CAS:528:DyaK38XmtlGhtLk%3D 10.1002/masy.19920570113
- W. Kaminsky, Makromol. Chem., Macromol. Symp. 57, 145 (1992).
- (1992) Makromol. Chem., Macromol. Symp. , vol.57 , pp. 145
- Kaminsky, W.¹

194
- 30144445555
- 10.1016/j.polymdegradstab.2005.06.021 1:CAS:528:DC%2BD28Xhs1Oltw%3D%3D
- C. Flaviu, L. Ciolacu, N. R. Choudhury, and N. K. Dutta, Polym. Degrad. Stab. 91, 875 (2006).
- (2006) Polym. Degrad. Stab. , vol.91 , pp. 875
- Flaviu, C.¹ Ciolacu, L.² Choudhury, N.R.³ Dutta, N.K.⁴

195
- 30144436478
- 1:CAS:528:DC%2BD28Xhs1OisA%3D%3D 10.1016/j.polymdegradstab.2005.05.028
- H. A. Lecomte, and J. J. Liggat, Polym. Degrad. Stab. 91, 681 (2006).
- (2006) Polym. Degrad. Stab. , vol.91 , pp. 681
- Lecomte, H.A.¹ Liggat, J.J.²

196
- 0029516157
- 10.1016/0141-3910(95)00121-2
- F. Villan, J. Coudane, M. Vert, Polym. Degrad. Stab. 49, 393 (1995).
- (1995) J. Coudane, M. Vert, Polym. Degrad. Stab. , vol.49 , pp. 393
- Villan, F.¹

197
- 84882627919
- A. Karzen, J. Appl. Polym. Sci. 69, 1115 (1999).
- (1999) J. Appl. Polym. Sci. , vol.69 , pp. 1115
- Karzen, A.¹

198
- 84882680813
- US Patent No. 6545061
- W. S. Murdoch, US Patent No. 6545061 (2003).
- (2003)
- Murdoch, W.S.¹

199
- 84882673458
- US Patent No. 5008366
- O. M. Bathe, US Patent No. 5008366 (1991).
- (1991)
- Bathe, O.M.¹

200
- 84882615801
- US Patent No. 5597852
- R. Unger, H. Sieckmann, and K. H. Wiltzer, US Patent No. 5597852 (1997).
- (1997)
- Unger, R.¹ Sieckmann, H.² Wiltzer, K.H.³

201
- 84882734804
- US Patent No. 6214893
- N. Ishihara, W. Kawamura, M. Kishi, and K. Okazaki, US Patent No. 6214893 (2001).
- (2001)
- Ishihara, N.¹ Kawamura, W.² Kishi, M.³ Okazaki, K.⁴

202
- 84882605076
- US Patent No. 5554657
- T. F. Brownscombe, H. L. Fong, Z. Diaz, H. H. Chuah, R. L. June, K. L. Rollick, T. C. Semple, and M. R. Tompkin, US Patent No. 5554657 (1996).
- (1996)
- Brownscombe, T.F.¹ Fong, H.L.² Diaz, Z.³ Chuah, H.H.⁴ June, R.L.⁵ Rollick, K.L.⁶ Semple, T.C.⁷ Tompkin, M.R.⁸

203
- 84882649403
- US Patent No. 5559159
- B. J. Sublett, G. W. Connell, US Patent No. 5559159 (1996).
- (1996)
- Sublett, B.J.¹ Connell, G.W.²

204
- 0002439095
- 1:CAS:528:DyaK3sXitFCntr0%3D 10.1021/bk-1992-0513.ch015
- R. E. Richard, W. H. Boon, M. L. Martinschultz, and E. A. Sisson, ACS Symp. Ser., Vol. 513, 196 (1992).
- (1992) ACS Symp. Ser. , vol.513 , pp. 196
- Richard, R.E.¹ Boon, W.H.² Martinschultz, M.L.³ Sisson, E.A.⁴

205
- 84882608047
- US Patent No. 4847314
- J. A. Tortorello and H. Gong, US Patent No. 4847314 (1989)
- (1989)
- Tortorello, J.A.¹ Gong, H.²

206
- 0029293216
- 10.1002/app.1995.070560311
- I. Karayannidis, P. George, D. E. Kokkalas, and D. N. Bikiaris, J. Appl. Polym. Sci. 56, 405 (2003).
- (2003) J. Appl. Polym. Sci. , vol.56 , pp. 405
- Karayannidis, I.¹ George, P.² Kokkalas, D.E.³ Bikiaris, D.N.⁴

207
- 84882702032
- N. G. Gaylord and S. Rosenbaum, J. Appl. Polym. Sci. 52, 124 (2003).
- (2003) J. Appl. Polym. Sci. , vol.52 , pp. 124
- Gaylord, N.G.¹ Rosenbaum, S.²

208
- 0023292895
- 1:CAS:528:DyaL2sXmslOlsA%3D%3D 10.1021/ie00062a003
- U. R. Vaidya and V. M. Nadkarni, Ind. Eng. Chem. Res. 26, 194 (1987).
- (1987) Ind. Eng. Chem. Res. , vol.26 , pp. 194
- Vaidya, U.R.¹ Nadkarni, V.M.²

209
- 0023386508
- 1:CAS:528:DyaL2sXksF2ru7k%3D 10.1002/app.1987.070340120
- U. R. Vaidya and V. M. Nadkarni, J. Appl. Polym. Sci. 34, 235 (1987).
- (1987) J. Appl. Polym. Sci. , vol.34 , pp. 235
- Vaidya, U.R.¹ Nadkarni, V.M.²

210
- 0023960832
- 1:CAS:528:DyaL1cXhs1yjsro%3D 10.1002/app.1988.070350317
- U. R. Vaidya and V. M. Nadkarni, J. Appl. Polym. Sci. 35, 775 (1988).
- (1988) J. Appl. Polym. Sci. , vol.35 , pp. 775
- Vaidya, U.R.¹ Nadkarni, V.M.²

211
- 0024731435
- 1:CAS:528:DyaL1MXmtFGmu7g%3D 10.1002/app.1989.070380615
- U. R. Vaidya and V. M. Nadkarni, J. Appl. Polym. Sci. 38, 1179 (1989).
- (1989) J. Appl. Polym. Sci. , vol.38 , pp. 1179
- Vaidya, U.R.¹ Nadkarni, V.M.²

212
- 0025684503
- 1:CAS:528:DyaK3MXhsVGitbo%3D
- U. R. Vaidya and V. M. Nadkarniv, Polym. Mater. Sci. Eng. 63, 1029 (1990).
- (1990) Polym. Mater. Sci. Eng. , vol.63 , pp. 1029
- Vaidya, U.R.¹ Nadkarniv, V.M.²

213
- 84882724690
- JP Appl. No. 04-25863T
- H. Watanabe, T. Okutsu, and A. Ushimaru, JP Appl. No. 04-25863T (1992).
- (1992)
- Watanabe, H.¹ Okutsu, T.² Ushimaru, A.³

214
- 84882600947
- CN Patent No. 1073164
- R. Y. Bai, W. Ii, and M. Wang, CN Patent No. 1073164 (1993).
- (1993)
- Bai, R.Y.¹ Ii, W.² Wang, M.³

215
- 84882653005
- US Patent No. 6048907
- D. Peterson, US Patent No. 6048907 (2000).
- (2000)
- Peterson, D.¹

216
- 84882602122
- US Patent No. 5073203
- A. L. G. Hussain, US Patent No. 5073203 (1991).
- (1991)
- Hussain, A.L.G.¹

217
- 84882677108
- US Patent No. 4439549
- M. E. Brennan, US Patent No. 4439549 (1984).
- (1984)
- Brennan, M.E.¹

218
- 0022061998
- 1:CAS:528:DyaL2MXktlyjsLg%3D
- W. L. Carlstrom, R. T. Stoehr, and G. R. Svoboda, Mod. Plast. 62, 100 (1985).
- (1985) Mod. Plast. , vol.62 , pp. 100
- Carlstrom, W.L.¹ Stoehr, R.T.² Svoboda, G.R.³

219
- 84882612696
- JP Appl. No. 60-147432
- K. Kato and M. Shibata, JP Appl. No. 60-147432 (1985).
- (1985)
- Kato, K.¹ Shibata, M.²

220
- 84882649421
- R. Ostrysz, E. Wardziriska, and P. Penczek, in Proceedings of the Seminar Polimery 2000, Plock, 1995.
- (1995) Proceedings of the Seminar Polimery 2000, Plock
- Ostrysz, R.¹ Wardziriska, E.² Penczek, P.³

221
- 0009757528
- Szczecin-Miedzyzdroje
- D. Paszun and T. Spychaj, in Proceedings of the National Conference on Polymers Environment Recycling, Szczecin-Miedzyzdroje, 1995, p. 221.
- (1995) Proceedings of the National Conference on Polymers Environment Recycling , pp. 221
- Paszun, D.¹ Spychaj, T.²

222
- 2542502456
- 1:CAS:528:DC%2BD2cXksFahur4%3D 10.1002/pi.1389
- A. Oromiehie and A. Mamizadeh, Polym. Int. 53, 728 (2004).
- (2004) Polym. Int. , vol.53 , pp. 728
- Oromiehie, A.¹ Mamizadeh, A.²

223
- 0027989081
- Brookfield, USA
- M. Bakker, in Proceedings of the Annual Technical Conference-ANTEC, SPE, Brookfield, USA, 1994, p. 996.
- (1994) Proceedings of the Annual Technical Conference-ANTEC, SPE , pp. 996
- Bakker, M.¹

224
- 12444296475
- 10.1177/1528083705049053 1:CAS:528:DC%2BD2MXhtF2ltrc%3D
- K. Gurudutt, P. De, A. K. Rakshit, and M. K. Bardhan, J. Ind. Text. 34, 167 (2005).
- (2005) J. Ind. Text. , vol.34 , pp. 167
- Gurudutt, K.¹ De, P.² Rakshit, A.K.³ Bardhan, M.K.⁴

225
- 0242663299
- 10.1002/app.12969 1:CAS:528:DC%2BD3sXptFGhsbc%3D
- K. Gurudutt, P. De, A. K. Rakshit, and M. K. Bardhan, J. Appl. Polym. Sci. 90, 3536 (2003).
- (2003) J. Appl. Polym. Sci. , vol.90 , pp. 3536
- Gurudutt, K.¹ De, P.² Rakshit, A.K.³ Bardhan, M.K.⁴

226
- 84882586559
- US Patent No. 6191177
- M. P. Ekart, J. Pell, M. Thomas, D. D. Cornell, and D. B. Shackelford, US Patent No. 6191177 (2001).
- (2001)
- Ekart, M.P.¹ Pell, J.² Thomas, M.³ Cornell, D.D.⁴ Shackelford, D.B.⁵

227
- 84882691225
- US Patent No. 6376563
- W. D. Robinson and G. L. Vadnais, US Patent No. 6376563 (2002).
- (2002)
- Robinson, W.D.¹ Vadnais, G.L.²

228
- 0020322574
- 1:CAS:528:DyaL38XlsFSlurw%3D 10.1016/0142-9612(82)90008-4
- K. Z. Gumargalieva, Y. V. Moiseev, T. T. Daurova, and O. S. Voronkoya, Biomaterials 3, 177 (1982).
- (1982) Biomaterials , vol.3 , pp. 177
- Gumargalieva, K.Z.¹ Moiseev, Y.V.² Daurova, T.T.³ Voronkoya, O.S.⁴

229
- 84882594518
- US Patent No. 6936204
- A.-M. Sahar, US Patent No. 6936204 (2005).
- (2005)
- Sahar, A.-M.¹

230
- 84882686615
- US Patent No. 4360661
- C. Horlbeck, H. Heuer, H. J. Bax, and H. Jadamus, US Patent No. 4360661 (1982).
- (1982)
- Horlbeck, C.¹ Heuer, H.² Bax, H.J.³ Jadamus, H.⁴

231
- 84882719794
- US Patent No. 5665784
- T. C. Moore, C. S. Nichols, and J. C. Tucker, US Patent No. 5665784 (1997).
- (1997)
- Moore, T.C.¹ Nichols, C.S.² Tucker, J.C.³

232
- 84882659413
- US Patent No. 6429233
- H. Oguri, M. Matsumoto, and H. Umemoto, US Patent No. 6429233 (2002).
- (2002)
- Oguri, H.¹ Matsumoto, M.² Umemoto, H.³

233
- 84882615022
- US Patent No. 5298530
- W. Gamble, J. Naujokas, A. Andrius, and B. R. DeBruin, US Patent No. 5298530 (1994).
- (1994)
- Gamble, W.¹ Naujokas, J.² Andrius, A.³ Debruin, B.R.⁴

234
- 0343359331
- 10.1002/pol.1962.1205716577
- W. P. Baker, J. Polym. Sci. 57, 993 (2003).
- (2003) J. Polym. Sci. , vol.57 , pp. 993
- Baker, W.P.¹

235
- 84882715814
- V. Nadkarni, Int. Fiber J. 14(3) (1999).
- (1999) Int. Fiber J. , vol.14 , Issue.3

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.