Sintering of multilayered porous structures: Part I-constitutive models

Journal of the American Ceramic Society

Volumn 96, Issue 8, 2013, Pages 2657-2665

  Olevsky, Eugene ^b,c   Molla, Tesfaye Tadesse ^a   Frandsen, Henrik Lund ^a   Bjørk, Rasmus ^a   Esposito, Vincenzo ^a   Ni, De Wei ^a   Ilyina, Aleksandra ^c   Pryds, Nini ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^b SAN DIEGO STATE UNIVERSITY   (United States)

^c NATIONAL RESEARCH NUCLEAR UNIVERSITY MEPHI   (Russian Federation)

Author keywords

[No Author keywords available]

Indexed keywords

EXPERIMENTAL TECHNIQUES; MASTER SINTERING CURVE; MODELING FRAMEWORKS; PROCESS CONTROLLING; RELATIVE INTENSITY; SINTERING KINETICS; SINTERING SHRINKAGE; TWO-LAYER MATERIALS;

CONTINUUM MECHANICS; KINETICS; OPTIMIZATION; POROSITY; SHRINKAGE;

SINTERING;

EID: 84881668454     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/jace.12375     Document Type: Article

References (35)

1. M. Chiang, J. Jean, and, S. Ling, " The Effect of Anisotropic Shrinkage in Tape-Cast low-Temperature Cofired Ceramics on Camber Development of Bilayer Laminates," J. Am. Ceram. Soc., 94, 683-6 (2011).
2. J. Chang, O. Guillon, J. Rödel, and, S. Kang, " Characterization of Warpage Behaviour of Gd-Doped Ceria/NiO-Yttria Stabilized Zirconia bi-Layer Samples for Solid Oxide Fuel Cell Application," J. Power Sources, 185, 759-64 (2008).
3. G. Jung, C. Wei, A. Su, F. Weng, Y. C. Hsu,and, S. Chan, Effect of Cosintering of Anode-Electrolyte Bilayer on the Fabrication of Anode-Supported Solid Oxide Fuel Cells, J. Solid State Electrochem., 12, 1605-10 (2008).
4. Q. Liu, K. Khor, S. Chan, and, X. Chen, " Anode-Supported Solid Oxide Fuel Cell With Yttria-Stabilized Zirconia/Gadolinia-Doped Ceria Bilalyer Electrolyte Prepared by wet Ceramic co-Sintering Process," J. Power Sources, 162, 1036-42 (2006).
5. H. Li, C. Xia, X. Fang, X. He, X. Wei, and, G. Meng, " Co-Sintering of SDC/NiO-SDC bi-Layers Prepared by Tape Casting," Key Eng. Mater., 280-283, 779-84 (2005).
6. P. Cai, D. Green, and, G. Messing, " Constrained Densification of Alumina/Zirconia Hybrid Laminates, I: Experimental Observations of Processing Defects," J. Am. Ceram. Soc., 80, 1929-39 (1997).
7. P. Cai, D. Green, and, G. Messing, " Constrained Densification of Alumina/Zirconia Hybrid Laminates, II: Viscoelastic Stress Computation," J. Am. Ceram. Soc., 80, 1940-8 (1997).
8. D. Green, P. Cai, and, G. Messing, " Residual Stresses in Alumina-Zirconia Laminates," J. Eur. Ceram. Soc., 19, 2511-7 (1999).
9. R. Zuo, E. Aulbach, and, J. Rödel, " Shrinkage-Free Sintering of low-Temperature Cofired Ceramics by Loading Dilatometry," Acta Mater., 51, 4563-74 (2003).
10. R. Hsu, and, J. Jean, " Key Factors Controlling Camber Behavior During the Cofiring of bi-Layer Ceramic Dielectric Laminates," J. Am. Ceram. Soc., 88, 2429-34 (2005).
11. D. Ravi, and, D. Green, " Sintering Stresses and Distortion Produced by Density Differences in bi-Layer Structures," J. Eur. Ceram. Soc., 26, 17-25 (2006).
12. S. Schoenberg, D. Green, A. Segall, G. Messing, A. Grader, and, P. Halleck, " Stresses and Distortion due to Green Density Gradients During Densification," J. Am. Ceram. Soc., 89, 3027-33 (2006).
13. E. Olevsky, V. Tikare, and, T. Garino, " Multi-Scale Modeling of Sintering-A Review," J. Am. Ceram. Soc., 89, 1914-22 (2006).
14. J. Feng, M. Qiu, Y. Fan, and, N. Xu, " The Effect of Membrane Thickness on the co-Sintering Process of bi-Layer ZrO2/Al2O3 Membrane," J. Membr. Sci., 305, 20-6 (2007).
15. T. Cheng, and, R. Raj, " Flaw Generation During Constrained Sintering of Metal-Ceramic and Metal-Glass Multilayer Films," J. Am. Ceram. Soc., 72, 1649-55 (1989).
16. G. Lu, R. Sutterlin, and, T. Gupta, " Effect of Mismatched Sintering Kinetics on Camber in a low-Temperature Cofired Ceramic Package," J. Am. Ceram. Soc., 76, 1907-14 (1993).
17. J. Jean, and, C. Chang, " Camber Development During co-Firing Ag-Based low Dielectric-Constant Ceramic Package," J. Mater. Res., 12, 2743-50 (1997).
18. J. Jean, and, C. Chang, " Co-Firing Kinetics and Mechanisms of an Ag-Metallized Ceramic-Filled Glass Electronic Package," J. Am. Ceram. Soc., 80, 3084-92 (1997).
19. C. Chang, and, J. Jean, " Effects of Silver-Paste Formulation on Camber Development During the Cofiring of a Silver-Based, low-Temperature- Cofired Ceramic Package," J. Am. Ceram. Soc., 81, 2805-14 (1998).
20. J. Arterberry, E. Olevsky, and, V. Tikare, " Co-Firing of Multilayer Ceramic Composites," Adv. Powder. Metall. Part. Mater., 1-202, 12 pp (2001).
21. E. Olevsky, A. Maximenko, J. Arterberry, and, V. Tikare, " Sintering of Multilayer Powder Composites: Distortion and Damage Control," Adv. Powder. Metall. Part. Mater., 5-156, 8 pp (2002).
22. A. Maximenko, and, E. Olevsky, " Damage in Sintering of Powder Laminates," pp. 197-201 in Proc. Intern. Conf. On Process Modeling in Powd. Met. And Partic. Mater., Edited by, A. Lawley, and, J. E. Smugeresky,. MPIF, Newport-Beach, 2002.
23. J. Kanters, U. Eisele, and, J. Rödel, " Cosintering Simulation and Experimentation: Case Study of Nanocrystalline Zirconia," J. Am. Ceram. Soc., 84, 2757-63 (2001).
24. J. Ollagnier, O. Guillon, and, J. Rödel, " Constrained Sintering of a Glass Ceramic Composite: I. Asymmetric Laminate," J. Am. Ceram. Soc., 93, 74-81 (2010).
25. J. Ollagnier, D. Green, O. Guillon, and, J. Rödel, " Constrained Sintering of a Glass Ceramic Composite: II. Symmetric Laminate," J. Am. Ceram. Soc., 92, 2900-6 (2009).
26. T. Molla, H. Frandsen, R. Bjørk, D. Ni, E. Olevsky, and, N. Pryds, " Modeling Kinetics of Distortion in Porous Bilayered Structures," J. Eur. Ceram. Soc., 33, 1297-305 (2013).
27. R. Bordia, and, G. Scherer, " On Constrained Sintering.I. Constitutive Model for a Sintering Body," Acta Metall., 36, 2393-7 (1988).
28. E. Olevsky, and, V. Skorohod, " Some Questions of Sintering Kinetics Under External Forces Influence in Technological and Structural Plasticity of Porous Materials," IPMS UNAS, 97-103 (1988).
29. E. Olevsky, " Theory of Sintering: From Discrete to Continuum," Mater. Sci. Eng., R, 23, 41-100 (1998).
30. G. Stoney, " The Tension of Metallic Films Deposited by Electrolysis," Proc. Roy. Soc. Lond. A, 82, 172-5 (1909).
31. S. Timoshenko, " Analysis of Bi-Metal Thermostats," J. Opt. Soc. Am. & Rev. Sci. Instrum., 11, 233-55 (1925).
32. V. Tikare, M. Braginsky, D. Bouvard, and, A. Vagnon, " Numerical Simulation of Microstructural Evolution During Sintering at the Mesoscale in a 3D Powder Compact," Comput. Mater. Sci., 48, 317-25 (2010).
33. R. Bjørk, V. Tikare, H. Frandsen, and, N. Pryds, " The Sintering Behavior of Close-Packed Spheres," Script. Mater, 67, 81-4 (2012).
34. R. Bjørk, V. Tikare, H. Frandsen, and, N. Pryds, " The Effect of Particle Size Distributions on the Microstructural Evolution During Sintering," J. Am. Ceram. Soc., 96, 103-10 (2013).
35. D. Ni, E. Olevsky, V. Esposito, T. Molla, S. Foghmoes, R. Bjørk, H. Frandsen, E. Aleksandrova, and, N. Pryds, " Sintering of Multilayered Porous Structures Part II: Experiment and Model Application," J. Am. Ceram. Soc., in press, doi: 10.1111/jace.12374.