A comprehensive model to predict the initial stage of combustion in SI engines

SAE Technical Papers

Volumn 2, Issue , 2013, Pages

  Lucchini, Tommaso ^a   Cornolti, Luca ^a   Montenegro, Gianluca ^a   D'Errico, Gianluca ^a   Fiocco, Marco ^a   Teraji, Atsushi ^b   Shiraishi, Taisuke ^b  

^a POLITECNICO DI MILANO   (Italy)

^b Nissan   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ELECTRIC DISCHARGES; ELECTRIC NETWORK PARAMETERS; ENERGY TRANSFER; ENGINES; EXPANSION; FLOW FIELDS; FLOW OF GASES; FORECASTING; GASES; HEAT CONDUCTION; THERMAL EXPANSION;

COHERENT FLAMELET MODEL; EXPERIMENTAL EVOLUTION; FLAME SURFACE DENSITIES; HEAT CONDUCTION EQUATIONS; IN-CYLINDER PRESSURES; LOCAL FLOW CONDITIONS; MIXTURE STRATIFICATIONS; MULTI-DIMENSIONAL MODEL;

IGNITION;

EID: 84881203016     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2013-01-1087     Document Type: Conference Paper

References (32)

1. Herweg, R., Begleris, P., Zettlitz, A., and Ziegler, G., Flow Field Effects on Flame Kernel Formation in a Spark-Ignition Engine, SAE Technical Paper 881639, 1988, doi: 10.4271/881639
2. Herweg, R. and Maly, R., A Fundamental Model for Flame Kernel Formation in S. I. Engines, SAE Technical Paper 922243, 1992, doi: 10.4271/922243.
3. Heywood J. B.,. Internal Combustion Engine Fundamentals. McGraw-Hill, 1988.
4. Peters N.,. Laminar Flamelet Concepts in Turbulent Combustion. 21st Symposium on Combustion (Int), pages pp. 1231-1250, 1986.
5. Yun K., Lee S., and Sung N.,. A Study of the Propagation of Turbulent Premixed Flame Using the Flame Surface Density Model in a Constant Volume Combustion Chamber. KSME International Journal, 16 (4):pp. 564-571, 2002.
6. D'Errico G., Lucchini T., Merola S., and Tornatore C.,. Application of a thermodynamic model with a complex chemistry to a cycle resolved knock prediction on a spark ignition optical engine. International Journal of Automotive Technology, Vol. 13 (3): 389-399, 2012.
7. Thiele M., Selle S., Riedel U., Warnatz J., and Maas U.,. Numerical simulation of Spark Ignition Including Ionization. Proceedings of the Combustion Institute, Vol. 28:pp. 1177-1185, 2000.
8. Tan, Z. and Reitz, R., Modeling Ignition and Combustion in Spark-ignition Engines Using a Level Set Method, SAE Technical Paper 2003-01-0722, 2003, doi: 10.4271/2003-01-0722.
9. Dahms R., Fansler T.D., Drake M.C., Kuo T.-W., Lippert A.M., and Peters N.,. Modeling ignition phenomena in spray-guided spark-ignited engines. Proceedings of the Combustion Institute, 32 (2): 2743-2750, 2009.
10. Falfari, S. and Bianchi, G., Development of an Ignition Model for S.I. Engines Simulation, SAE Technical Paper 2007-01-0148, 2007, doi: 10.4271/2007-01-0148.
11. Duclos J. M. and Colin O.,. Arc and Kernel Tracking Ignition Model for 3D Spark-Ignition engine calculations. Proceedings of COMODIA 2001 conference, 2001.
12. Duclos J. P., Zolver M., and Baritaud T.,. 3d Modeling of Combustion for DI-SI Engines. Oil and Gas Science and Technology, 54:pp. 259-264, 1999.
13. Dahms R. N., Drake M. C., Fansler T. D., Kuo T.-W., and Peters N.,. Understanding ignition processes in spray-guided gasoline engines using high-speed imaging and the extended spark-ignition model SparkCIMM. Part A: Spark channel processes and the turbulent flame front propagation. Combustion and Flame., 158 (11): 2229-2244, 2011.
14. Lucchini T., D'Errico G., and Ettorre D.,. Numerical investigation of the spraymeshturbulence interactions for high-pressure, evaporating sprays at engine conditions. International Journal of Heat and Fluid Flow, 32:pp. 285-297, 2011.
15. Yang, X., Solomon, A., and Kuo, T., Ignition and Combustion Simulations of Spray-Guided SIDI Engine using Arrhenius Combustion with Spark-Energy Deposition Model, SAE Technical Paper 2012-01-0147, 2012, doi: 10.4271/2012-01-0147.
16. Weller H.G., Tabor G., Jasak H., and Fureby C.,. A Tensorial Approach to CFD using Object Orientated Techniques. Computers in Physics, Vol. 12 (No. 6): 620, 1998.
17. OpenFOAM website. http://www.openfoam.org. ESI Group, 2012.
18. Lucchini, T., D'Errico, G., Onorati, A., Bonandrini, G., et al., Development of a CFD Approach to Model Fuel-Air Mixing in Gasoline Direct-Injection Engines, SAE Technical Paper 2012-01-0146, 2012, doi: 10.4271/2012-01-0146.
19. Contino F., Jeanmart H., Lucchini T., and D'Errico G.,. Coupling of in situ adaptive tabulation and dynamic adaptive chemistry: An effective method for solving combustion in engine simulations. Proceedings of the Combustion Institute, 33 (2): 3057-3064, 2011.
20. Lucchini, T., D'Errico, G., Ettorre, D., Brusiani, F., et al., Experimental and Numerical Investigation of High-Pressure Diesel Sprays with Multiple Injections at Engine Conditions, SAE Technical Paper 2010-01-0179, 2010, doi: 10.4271/2010-01-0179.
21. Song, J. and Sunwoo, M., A Modeling and Experimental Study of Initial Flame Kernel Development and Propagation in SI Engines, SAE Technical Paper 2000-01-0960, 2000, doi: 10.4271/2000-01-0960.
22. Pashley, N., Stone, R., and Roberts, G., Ignition System Measurement Techniques and Correlations for Breakdown and Arc Voltages and Currents, SAE Technical Paper 2000-01-0245, 2000, doi: 10.4271/2000-01-0245.
23. Nordin N.,. Complex Chemistry Modeling of Diesel Spray Combustion. PhD thesis, Chalmers University of Technology, Department of Thermo Fluid Dynamics, 2001.
24. Shen, H., Hinze, P., and Heywood, J., A Model for Flame Initiation and Early Development in SI Engine and its Application to Cycle-to-Cycle Variations, SAE Technical Paper 942049, 1994, doi: 10.4271/942049.
25. D'Angola A., Colonna G., Gorse C., and Capitelli M.,. Thermodynamic and Transport Properties in Equilibrium Air Plasmas in a Wide Pressure and Temperature Range. The European Phisycal Journal D, 2008.
26. Kim, J. and Anderson, R., Spark Anemometry of Bulk Gas Velocity at the Plug Gap of a Firing Engine, SAE Technical Paper 952459, 1995, doi: 10.4271/952459.
27. Menevau C. and Poinsot T.,. Stretching and quenching of flamelets in premixed turbulent combustion. Combustion and Flame., 86: 311-332, 1991.
28. Bray K. N. C.,. Studies of the turbulent burning velocity. Proc. R. Soc. Lond. A, 431: 315-335, 1991
29. Choi C. R. and Huh K. Y.,. Development of a Coherent Flamelet Model for a Spark- Ignited Turbulent Premixed Flame in a Closed Vessel. Combustion and Flame., 114: 336-348, 1998.
30. Baritaud T. A., Duclos J., and Fusco A.,. Modeling Turbulent Combustion and Pollutant Formation in Stratified Charge SI Engines. Proceedings the Twenty-Sixth Symposium (International) on Combustion, pages pp. 2627-2635, 1996.
31. Rakopoulos C. D., Hountalas D.T., Tzanos E.I., and Taklis G. N.,. A Fast Algorithm for Calculating the Composition of Diesel Combustion Products Using an Eleven Species Chemical Equilibrium Sheme. Advances in Engineering Software Intern. J., 19 (2):pp. 109-119, 1994.
32. Gulder O. L.,. Laminar burning velocities of methanol, ethanol and isooctane-air mixtures. Symposium (International) on Combustion, pages pp. 275-281, 1982.