The effect of multiwall carbon nanotubes on the in-plane shear behavior of epoxy glass fiber reinforced composites

Composites Part B: Engineering

Volumn 55, Issue , 2013, Pages 421-425

  Fernández, Carolina ^a   Medina, Carlos ^a   Pincheira, Gonzalo ^a   Canales, Cristian ^a   Flores, Paulo ^a  

^a UNIVERSITY OF CONCEPCIÓN   (Chile)

Author keywords

A. Polymer matrix composites; B. Mechanical properties; B. Plastic deformation; D. Mechanical testing

Indexed keywords

EPOXY GLASS FIBER; IN-PLANE SHEAR; MATERIAL HARDENING; MECHANICAL BEHAVIOR; MECHANICAL STIRRING; MULTI-SCALE COMPOSITES; ROOM TEMPERATURE; VACUUM INFUSION;

ELASTIC MODULI; EPOXY RESINS; GLASS; LAMINATES; MECHANICAL TESTING; MULTIWALLED CARBON NANOTUBES (MWCN); POLYMER MATRIX COMPOSITES; RESINS; SHEAR STRAIN;

SHEAR FLOW;

EID: 84881165337     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2013.07.010     Document Type: Article

References (34)

1. W.K. Jung, B. Kim, M.S. Won, and S.H. Ahn Fabrication of radar absorbing structure (RAS) using GFR-nano composite and spring-back compensation of hybrid composite RAS shells Compos Struct 75 1 2006 571 576
2. S.-E. Lee, J.-H. Kang, and C.-G. Kim Fabrication and design of multi-layered radar absorbing structures of MWCNT-filled glass/epoxy plain-weave composites Compos Struct 76 4 2006 397 405 (Pubitemid 44296397)
3. I. Choi, J.G. Kim, I.S. Seo, and D.G. Lee Radar absorbing sandwich construction composed of CNT, PMI foam and carbon/epoxy composite Compos Struct 94 9 2012 3002 3008
4. P.C. Kim, and D.G. Lee Composite sandwich constructions for absorbing the electromagnetic waves Compos Struct 87 2 2009 161 167
5. L. Boeger, M. Wichmann, Leif Ole Meyer, and Karl Schulte Load and health monitoring in glass fibre reinforced composites with an electrically conductive nanocomposite epoxy matrix Compos Sci Technol 68 2008 1886 1894
6. J. Rausch, and E. Mäder Health monitoring in continuous glass fiber reinforced thermoplastics: manufacturing and application of interphase sensors based on carbon nanotubes Compos Sci Technol 70 11 2007 1589 1596
7. O.H. Lee, S.-S. Kim, and Y.-S. Lim Conduction noise absorption by fiber-reinforced epoxy composites with carbon nanotubes J Magnet Magnet Mater 323 5 2011 587 591
8. D.P.N. Vlasveld, W. Daud, H.E.N. Bersee, and S.J. Picken Continuous fibre composites with a nanocomposite matrix: improvement of flexural and compressive strength at elevated temperatures Compos Part A: Appl Sci Manuf 38 3 2007 730 738 (Pubitemid 44909038)
9. D.P.N. Vlasveld, W. Daud, H.E.N. Bersee, and S.J. Picken Nanocomposite matrix for increased fibre composite strength Polymer 46 23 2005 10269 10278 (Pubitemid 41455258)
10. Z. Shen, S. Bateman, D.Y. Wu, P. McMahon, M. Dell'Olio, and J. Gotama The effects of carbon nanotubes on mechanical and thermal properties of woven glass fibre reinforced polyamide-6 nanocomposites Compos Sci Technol 69 2 2009 239 244
11. W.D. Brouwer, E. van Herpt, and M. Labordus Vacuum injection moulding for large structural applications Compos Part A: Appl Sci Manuf 34 6 2003 551 558
12. P.-C. Ma, N. Siddiqui, G. Marom, and J.-K. Kim Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review Compos Part A: Appl Sci Manuf 41 10 2010 1345 1367
13. Z. Fan, M.H. Santare, and S.G. Advani Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes Composites: Part A 39 2008 540 554
14. W. Li, S. Buschhorn, K. Schulte, and W. Bauhofer The imaging mechanism, imaging depth, and parameters influencing the visibility of carbon nanotubes in a polymer matrix using an SEM Carbon 49 6 2011 1955 1964
15. L. Gao, T.-W. Chou, E. Thostenson, and Z. Zhang A comparative study of damage sensing in fiber composites using uniformly and non-uniformly dispersed carbon nanotubes Carbon 48 13 2010 3788 3794
16. A.T. Seyhan, M. Tanoǧlu, and K. Schulte Tensile mechanical behavior and fracture toughness of MWCNT and DWCNT modified vinyl-ester/ polyester hybrid nanocomposites produced by 3-roll milling Mater Sci Eng: A 523 1-2 2009 85 92
17. Jiménez-Suárez A, Campo M, Sánchez M, Romón C, Ureña A. Influence of the functionalization of carbon nanotubes on calendering dispersion effectiveness in a low viscosity resin for VARIM processes. Compo Part B: Eng [Available online 5 January 2012, ISSN 1359-8368, 10.1016/j.compositesb.2011.12.009].
18. F.H. Gojny, M.H.G. Wichmann, B. Fiedler, I.A. Kinloch, W. Bauhofer, and A.H. Windle Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites Polymer 47 6 2006 2036 2045 (Pubitemid 43344380)
19. L. Gao, T.-W. Chou, E. Thostenson, Z. Zhang, and M. Coulaud In situ sensing of impact damage in epoxy/glass fiber composites using percolating carbon nanotubes networks Carbon 49 10 2011 3382 3385
20. N.D. Alexopoulos, C. Bartholome, P. Poulin, and Z. Marioli-Riga Structural health monitoring of glass fiber reinforced composites using embedded carbon nanotube (cnt) fibers Compos Sci Technol 70 2 2010 260 271
21. S.A. Grammatikos, and A.S. Paipetis On the electrical properties of multi scale reinforced composites for damage accumulation monitoring Compos Part B: Eng 43 6 2012 2687 2696
22. N. De Greef, L. Gorbatikh, A. Godara, L. Mezzo, S. Lomov, and I. Verpoest The effect of carbon nanotubes on the damage development in carbon fiber/epoxy composites Carbon 49 14 2011 4650 4664
23. M. Kim, Y.-B. Park, O. Okoli, and C. Zhang Processing, characterization, and modeling of carbon nanotube-reinforced multiscale composites Compos Sci Technol 69 3-4 2008 335 342
24. N. De Greef, L. Gorbatikh, S. Lomov, and I. Verpoest Damage development in woven carbon fiber/epoxy composites modified with carbon nanotubes under tension in the bias direction Compos Part A: Appl Sci Manuf 42 11 2011 1635 1644
25. C. Hochard, and Y. Thollon A generalized damage model for woven ply laminates under static and fatigue loading conditions Int J Fatigue 32 1 2010 158 165
26. K. Pettersson, J. Neumeister, E. Gamstedt, and H. Öberg Stiffness reduction, creep, and irreversible strains in fiber composites tested in repeated interlaminar shear Compos Struct 76 1-2 2006 151 161
27. R. Böhm, M. Gude, and W. Hufenbach A phenomenologically based damage model for textile composites with crimped reinforcement Compos Sci Technol 70 1 2010 81 87
28. H. Altenbach, J. Altenbach, and W. Kissing Mechanics of composite structural elements 2004 Springer
29. Nanocyl. < http://www.nanocyl.com/en/CNT-Expertise-Centre/Carbon- Nanotubes > [accessed 07.04.2012].
30. M.R.C. Fouinneteau, and A.K. Pickett Shear mechanism modelling of heavy tow braided composites using a mesomechanical damage model Compos Part A: Appl Sci Manuf 38 11 2007 2294 2306 (Pubitemid 350017077)
31. L. Greve, and A.K. Pickett Modelling damage and failure in carbon/epoxy non-crimp fabric composites including effects of fabric pre-shear Composites: Part A 37 11 2006 1983 2001 (Pubitemid 44529111)
32. D.J. O'Dwyer, N.P. O'Dowd, and C.T. McCarthy Investigation of strain hardening effects under in-plane shear of unidirectional composite materials Comput Mater Sci 64 2012 179 182
33. C. Chandrasekaran, S. Advani, and M.H. Santare Influence of resin properties on interlaminar shear strength of glass/epoxy/MWNT hybrid composites Compos Part A: Appl Sci Manuf 42 8 2011 1007 1016
34. A. Godara, L. Gorbatikh, G. Kalinka, A. Warrier, O. Rochez, and L. Mezzo Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes Compos Sci Technol 70 9 2010 1346 1352