Preparation and characterization of thermoplastic polyurethanes using partially acetylated kraft lignin

Fibers and Polymers

Volumn 14, Issue 7, 2013, Pages 1082-1093

  Jeong, Heonyoung ^a   Park, Jongshin ^a   Kim, Sunghoon ^a   Lee, Jungmin ^a   Ahn, Narang ^a   Roh, Hyun gyoo ^a  

^a Seoul National University   (South Korea)

Author keywords

Acetylation; Softwood kraft lignin; Thermoplastic polyurethane

Indexed keywords

BREAKING STRAIN; MICROPHASE SEPARATED; PHASE MORPHOLOGY; SOFT AND HARD SEGMENTS; SOFTWOOD KRAFT LIGNINS; THERMOPLASTIC POLYURETHANES; VISCOUS RESPONSE; YOUNG'S MODULUS;

ACETYLATION; CROSSLINKING; ELASTIC MODULI; GLASS; GLASS TRANSITION; LIGNIN; MORPHOLOGY; REINFORCED PLASTICS; TENSILE STRENGTH; VISCOSITY;

POLYURETHANES;

EID: 84880994405     PISSN: 12299197     EISSN: None     Source Type: Journal    
DOI: 10.1007/s12221-013-1082-7     Document Type: Article

References (46)

1. W. Boerjan, J. Ralph, and M. Baucher, Annu. Rev. Plant Biol., 54, 519 (2003).
2. H. Byung-Ho, Forest Bioenergy, 23, 45 (2004).
3. J. H. Lora and W. G. Glasser, J. Polym. Environ., 10, 39 (2002).
4. H. Nimz, Angewandte Chemie International Edition in English, 13, 313 (1974).
5. A. Sakakibara, Wood Sci. Technol., 14, 89 (1980).
6. S. Kubo and J. F. Kadla, Biomacromolecules, 6, 2815 (2005).
7. K. Lundquist, T. K. Kirk, and W. J. Connors, Arch. Microbiol., 112, 291 (1977).
8. D. L. Crawford and R. L. Crawford, Enzym Microb Tech., 2, 11 (1980).
9. A. M. Deschamps, G. Mahoudeau, and J. M. Lebeault, Appl. Microbiol. Biotech., 9, 45 (1980).
10. T. K. Kirk and R. L. Farrell, Annu. Rev. Microbiol., 41, 465 (1987).
11. W. Zimmermann, J. Biotechnol., 13, 119 (1990).
12. M. Tuomela, M. Vikman, A. Hatakka, and M. Itävaara, Bioresource Technology, 72, 169 (2000).
13. A. Raj, M. Reddy, R. Chandra, H. Purohit, and A. Kapley, Biodegradation, 18, 783 (2007).
14. H. Yoshida, R. Mörck, K. P. Kringstad, and H. Hatakeyama, J. Appl. Polym. Sci., 34, 1187 (1987).
15. H. Cheradame, M. Detoisien, A. Gandini, F. Pla, and G. Roux, British Polym. J., 21, 269 (1989).
16. A. Reimann, R. Mörck, H. Yoshida, H. Hatakeyama, and K. P. Kringstad, J. Appl. Polym. Sci., 41, 39 (1990).
17. W. D. Oliveira and W. G. Glasser, Polymer, 35, 1977 (1994).
18. R. W. Thring, M. N. Vanderlaan, and S. L. Griffin, Biomass and Bioenergy, 13, 125 (1997).
19. D. V. Evtuguin, J. P. Andreolety, and A. Gandini, Eur. Polym. J., 34, 1163 (1998).
20. S. Hirose, K. Kobashigawa, Y. Izuta, and H. Hatakeyama, Polym. Int., 47, 247 (1998).
21. S. Sarkar and B. Adhikari, Eur. Polym. J., 37, 1391 (2001).
22. Y. Li and S. Sarkanen, Macromolecules, 35, 9707 (2002).
23. S. Chahar, M. G. Dastidar, V. Choudhary, and D. K. Sharma, J. Adhes. Sci. Technol., 18, 169 (2004).
24. C. Ciobanu, M. Ungureanu, L. Ignat, D. Ungureanu, and V. I. Popa, Industrial Crops and Products, 20, 231 (2004).
25. H. Hatakeyama, A. Nakayachi, and T. Hatakeyama, Compos. Part A: Appl. Sci. Manuf., 36, 698 (2005).
26. Y. Li and S. Sarkanen, Macromolecules, 38, 2296 (2005).
27. H. Nadji, C. Bruzzèse, M. N. Belgacem, A. Benaboura, and A. Gandini, Macromol. Mater. Eng., 290, 1009 (2005).
28. C. A. Cateto, M. F. Barreiro, A. E. Rodrigues, and M. N. Belgacem, Ind. Eng. Chem. Res., 48, 2583 (2009).
29. Z.-M. Liu, F. Yu, G.-Z. Fang, and H.-J. Yang, Journal of Forestry Research, 20, 161 (2009).
30. E. A. B. D. Silva, M. Zabkova, J. D. Araújo, C. A. Cateto, M. F. Barreiro, M. N. Belgacem, and A. E. Rodrigues, Chem. Eng. Res. Des., 87, 1276 (2009).
31. O. Faix, S. Argyropoulos Dimitris, D. Robert, and V. Neirinck, "Determination of Hydroxyl Groups in Lignins Evaluation of 1H-, 13C-, 31P-NMR, FTIR and Wet Chemical Methods", 1994.
32. C. A. Cateto, M. F. Barreiro, A. E. Rodrigues, M. C. Brochier-Salon, W. Thielemans, and M. N. Belgacem, J. Appl. Polym. Sci., 109, 3008 (2008).
33. E. A. Capanema, M. Y. Balakshin, and J. F. Kadla, J. Agr. Food Chem., 52, 1850 (2004).
34. O. Faix, Microchimica Acta, 94, 21 (1988).
35. P. B. Coleman, "Practical Sampling Techniques for Infrared Analysis", CRC Press, 1993.
36. J. Brugnerotto, J. Lizardi, F. M. Goycoolea, W. Argüelles-Monal, J. Desbrières, and M. Rinaudo, Polymer, 42, 3569 (2001).
37. T. Hatakeyama, S. Hirose, and H. Hatakeyama, Die Makromolekulare Chemie, 184, 1265 (1983).
38. ASTM D 638-10, "ASTM D 638-10", STM International, West Conshohocken, PA, 2010.
39. J. T. G. Fox and P. J. Flory, J. Appl. Phys., 21, 581 (1950).
40. M. Gordon and J. S. Taylor, J. Appl. Chem., 2, 493 (1952).
41. J. M. Gordon, G. B. Rouse, J. H. Gibbs, and J. W. M. Risen, J. Chem. Phys., 66, 4971 (1977).
42. E. Penzel, J. Rieger, and H. A. Schneider, Polymer, 38, 325 (1997).
43. S. C. Kim and L. H. Sperling, "IPNs Around the World: Science and Engineering", John Wiley, 1997.
44. R. J. Zdrahala, R. M. Gerkin, S. L. Hager, and F. E. Critchfield, J. Appl. Polym. Sci., 24, 2041 (1979).
45. K. Nakamae, T. Nishino, S. Asaoka, and Sudaryanto, Int. J. Adhes. Adhes., 16, 233 (1996).
46. W. G. Glasser, S. Sarkanen, P. American Chemical Society. Cellulose, T. Division, and A. C. S. Meeting, "Lignin: Properties and Materials", American Chemical Society, 1989.