Comparison of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part II: Contaminants, char and pyrolysis oil properties

Bioresource Technology

Volumn 144, Issue , 2013, Pages 370-379

  Miskolczi, Norbert ^a   Ateş, Funda ^b   Borsodi, Nikolett ^a  

^a UNIVERSITY OF PANNONIA   (Hungary)

^b ANADOLU UNIVERSITY   (Turkey)

Author keywords

Catalysts; Contaminants; Double bond isomerization; Pyrolysis

Indexed keywords

BATCH REACTORS; IMPURITIES; ISOMERIZATION; ISOMERS; MOLYBDENUM OXIDE; MUNICIPAL SOLID WASTE; PYROLYSIS;

CATALYST SURFACES; COKE DEPOSITS; DOUBLE-BOND ISOMERIZATION; H-ZSM-5; PYROLYSIS OIL; TEXTURE ANALYSIS;

CATALYSTS;

ALKENE; BROMIDE; CALCIUM; CARBON; CHLORINE; CHROMIUM; COKE; IRON; NITROGEN; PHOSPHORUS; PLASTIC; POTASSIUM ION; SULFUR; ZEOLITE; ZINC;

CATALYSIS; CHARCOAL; CHEMICAL BONDING; COMPARATIVE STUDY; CONCENTRATION (COMPOSITION); MORPHOLOGY; PYROLYSIS; TEMPERATURE EFFECT; TEXTURE; VISCOSITY; WASTE TREATMENT; ZEOLITE;

ARTICLE; ASH; BATCH REACTOR; CATALYST; GAS FLOW; ISOMERIZATION; MOISTURE; MUNICIPAL SOLID WASTE; ORGANIC WASTE; PRIORITY JOURNAL; PYROLYSIS; SHEAR RATE; VISCOSITY; WASTE MANAGEMENT; WASTE PYROLYSIS; WATER CONTENT;

CATALYSTS; CONTAMINANTS; DOUBLE BOND ISOMERIZATION; PYROLYSIS;

ALKENES; CATALYSIS; CHARCOAL; CITIES; ENVIRONMENTAL POLLUTANTS; GASOLINE; HOT TEMPERATURE; OILS; PLASTICS; REFUSE DISPOSAL; SOLID WASTE; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; TIME FACTORS; VISCOSITY;

EID: 84880930388     PISSN: 09608524     EISSN: 18732976     Source Type: Journal    
DOI: 10.1016/j.biortech.2013.06.109     Document Type: Article

References (34)

1. Abdullah H., Mourant D., Li C.-Z., Wu H. Bio slurry as a fuel. 3. Fuel and rheological properties of bio slurry prepared from the bio-oil and bio char of mallee biomass fast pyrolysis. Energy Fuels 2010, 24:5669-5676.
2. Ateş F., Miskolczi N., Borsodi N. Comparison of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part I: product yields, gas and pyrolysis oil properties. Bioresour. Technol. 2013, 133:443-454.
3. Bernardo M., Goncalves M., Lapa N., Barbosa R., Mendes B., Pinto F. Characterization of chars produced in the co-pyrolysis of different wastes: decontamination study. J. Hazard. Mater. 2012, 207-208:28-35.
4. Bhaskar T., Tanabe M., Muto A., Sakata Y. Pyrolysis study of a PVDC and HIPS-Br containing mixed waste plastic stream: effect of the poly(ethylene terephthalate). J. Anal. Appl. Pyrol. 2006, 77:68-74.
5. Blazsó M., Czégény Zs., Csoma Cs. Pyrolysis and debromination of flame retarded polymers of electronic scrap studied by analytical pyrolysis. J. Anal. Appl. Pyrol. 2002, 64:249-261.
6. Boateng A.A., Daugaard D.E., Goldberg N.M., Hicks K.B. Bench-scale fluidized-bed pyrolysis of switchgrass for bio-oil production. Ind. Eng. Chem. Res. 2007, 46:1891-1897.
7. Boucher M.E., Chaala A., Pakdel H., Roya C. Bio-oils obtained by vacuum pyrolysis of softwood bark as a liquid fuel for gas turbines. Part II: stability and ageing of bio-oil and its blends with methanol and a pyrolytic aqueous phase. Biomass Bioenergy 2000, 19:351-361.
8. Bridgewater A.V. Review of fast pyrolysis of biomass and product upgrading. Biomass Bioenergy 2012, 38:68-94.
9. Diebold, J.P., 2000. A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils, NREL/SR-570-27613, 53.
10. Garcia-Perez M., Wang X.S., Shen J., Rhodes M.J., Tian F., Lee W.J., Wu H., Li C.Z. Fast pyrolysis of oil mallee woody biomass: effect of temperature on the yield and quality of pyrolysis products. Ind. Eng. Chem. Res. 2008, 47:1846-1854.
11. He P., Ye X.P., English B.C., Satrio J.A. Influence of pyrolysis condition on switchgrass bio-oil yield and physic chemical properties. Bioresour. Technol. 2009, 21:5305-5311.
12. Ingram L., Mohan D., Bricka M., Steele P., Strobel D., Crocker D., Mitchell B., Mohammad J., Cantrell K., Pittman C.U. Pyrolysis of wood and bark in an auger reactor: physical properties and chemical analysis of the produced bio-oil. Energy Fuels 2008, 22:614-625.
13. Kim S.-S., Agblevor F.A., Lim J. Fast pyrolysis of chicken litter and turkey litter in a fluidized bed reactor. J. Ind. Eng. Chem. 2009, 15:247-252.
14. Lee Y., Eum P.R.B., Ryu C., Park Y.K., Jung J.H., Hyun S. Characteristics of biochar produced from slow pyrolysis of Geodae-Uksae 1. Bioresour. Technol. 2013, 130:345-350.
15. López A., de Marco I., Caballero B.M., Laresgoiti M.F., Adrados A. Pyrolysis of municipal plastic wastes: influence of raw material composition. Waste Manag. 2010, 30:620-627.
16. López A., de Marco I., Caballero B.M., Laresgoiti M.F., Adrados A., Torres A. Pyrolysis of municipal plastic wastes II: influence of raw material composition under catalytic conditions. Waste Manag. 2011, 31:1973-1983.
17. Miranda R., Pakdel H., Roy C., Vasile C. Vacuum pyrolysis of commingled plastics containing PVC II. Product analysis. Polym. Degrad. Stabil. 2001, 73:47-67.
18. Miskolczi N., Buyong F., Angyal A., Williams P.T., Bartha L. Two stages catalytic pyrolysis of refuse derived fuel: production of biofuel via syncrude. Bioresour. Technol. 2011, 101:8881-8890.
19. Miskolczi N., Borsodi N., Buyong F., Angyal A., Williams P.T. Production of pyrolytic oils by catalytic pyrolysis of Malaysian refuse-derived fuels in continuously stirred batch reactor. Fuel Proc. Technol. 2011, 92:925-932.
20. Mitan N.M.M., Brebu M., Bhaskar T., Muto A., Sakata Y. Individual and simultaneous degradation of brominated high-impact polystyrene and brominated acrylonitrile-butadiene-styrene and removal of heteroelements (Br, N and O) from degradation oil by multiphase catalytic systems. J. Mater. Cycles. Waste. Manag. 2007, 9:56-61.
21. Mohan D., Pittman C.U., Steele P.H. Pyrolysis of wood/biomass for bio-oil: a critical review. Energy Fuels 2006, 20:848-889.
22. Nolte M.W., Liberatore M.W. Viscosity of biomass pyrolysis oils from various feedstocks. Energy Fuels 2010, 24:6601-6608.
23. Oasmaa A., Czernik S. Fuel oil quality of biomass pyrolysis oils state of the art for the end users. Energy Fuels 1999, 13:914-921.
24. Pattiya A., Titiloye J., Bridgwater A.V. Fast pyrolysis of cassava rhizome in the presence of catalysts. J. Anal. Appl. Pyrol. 2008, 81:72-79.
25. Sakata Y., Bhaskar T., Uddin Md.A., Muto A., Matsui T. Development of a catalytic dehalogenation (Cl, Br) process for municipal waste plastic-derived oil. J. Mater. Cycles. Waste. Manag. 2003, 5:113-124.
26. Scheirs J., Kaminsky W. Feedstock Recycling and Pyrolysis of Waste Plastics 2006, John Wiley and Sons Ltd, 225-244.
27. Seki T., Ikeda S., Onaka M. Synthesis of sodium-doped mesoporous alumina and its strong base catalysis for double bond migration of olefins. Microporous Mesoporous Mater. 2006, 1-3:121-126.
28. Seth D., Sarkar A. Thermal pyrolysis of polypropylene: effect of reflux-condenser on the molecular weight distribution of products. Chem. Eng. Sci. 2004, 59:2433-2445.
29. Sharypov V.I., Beregovtsova N.G., Kuznetsov B.N., Membrado L., Cebolla V.L., Marin N., Weber J.V. Co-pyrolysis of wood biomass and synthetic polymers mixtures. Part III: characterisation of heavy products. J. Anal. Appl. Pyrol. 2003, 67:325-340.
30. Vasile C., Brebu M.A., Karayildirim T., Daire H. Feedstock recycling from plastic and thermoset fractions of used computers (I): pyrolysis. J. Mater. Cycles. Waste. Manag. 2006, 8:99-108.
31. Velghe I., Carleer R., Yperman J., Scherurs S. Study of the pyrolysis of sludge and sludge/disposal filter cake mix for the production of value added products. Bioresour. Technol. 2013, 134:1-9.
32. Yang X., Sun L., Xiang J., Hu S., Su S. Pyrolysis and dehalogenation of plastics from waste electrical and electronic equipment (WEEE): a review. Waste Manag. 2013, 33:462-473.
33. Zevenhoven-Onderwater M., Backman R., Skrifvars B.-J., Hupa M. The ash chemistry in fluidised bed gasification of biomass fuels. Part I: predicting the chemistry of melting ashes and ash-bed material interaction. Fuel 2001, 80:1489-1502.
34. Zhang Q., Chang J., Wang T., Xu Y. Upgrading bio-oil over different solid catalyst. Energy Fuels 2006, 20:2717-2720.