Mechanism of fatigue performance enhancement in a laser sintered superhard nanoparticles reinforced nanocomposite followed by laser shock peening

Journal of Applied Physics

Volumn 113, Issue 13, 2013, Pages

  Lin, Dong ^a,b   Ye, Chang ^a,b   Liao, Yiliang ^a,b   Suslov, Sergey ^b   Liu, Richard ^a   Cheng, Gary J ^a,b  

^a SCHOOL OF INDUSTRIAL ENGINEERING   (United States)

^b PURDUE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DISLOCATION DENSITIES; DISLOCATION MOVEMENT; FATIGUE PERFORMANCE; FUNDAMENTAL MECHANISMS; LASER SHOCK PEENING; MANUFACTURING PROCESS; NANO-COMPOSITE LAYERS; REINFORCED NANOCOMPOSITE;

LASER HEATING; NANOCOMPOSITES;

NANOPARTICLES;

EID: 84880691239     PISSN: 00218979     EISSN: None     Source Type: Journal    
DOI: 10.1063/1.4799154     Document Type: Conference Paper

References (51)

1. C. S. Montross, T. Wei, L. Ye, G. Clark, and Y.-W. Mai, " Laser shock processing and its effects on microstructure and properties of metal alloys: A review.," Int. J. Fatigue 24 (10), 1021-1036 (2002). 10.1016/S0142-1123(02)00022-1
2. P. Peyre and R. Fabbro, " Laser shock processing: A review of the physics and applications.," Opt. Quantum Electron. 27 (12), 1213-1229 (1995).
3. I. Nikitin and I. Altenberger, " Comparison of the fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic stainless steel AISI 304 in the temperature range 25-600°C.," Mater. Sci. Eng., A 465 (1-2), 176-182 (2007). 10.1016/j.msea.2007.02.004
4. I. Nikitin, B. Scholtes, H. J. Maier, and I. Altenberger, " High temperature fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic steel AISI 304.," Scr. Mater. 50 (10), 1345-1350 (2004). 10.1016/j.scriptamat.2004.02.012
5. P. Juijerm and I. Altenberger, " Residual stress relaxation of deep-rolled Al-Mg-Si-Cu alloy during cyclic loading at elevated temperatures.," Scr. Mater. 55 (12), 1111 (2006). 10.1016/j.scriptamat. 2006.08.047
6. C. Ye, S. Suslov, B. J. Kim, E. A. Stach, and G. J. Cheng, " Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening.," Acta Mater. 59 (3), 1014-1025 (2011). 10.1016/j.actamat.2010.10.032
7. K. Lu, L. Lu, and S. Suresh, " Strengthening materials by engineering coherent internal boundaries at the nanoscale.," Science 324 (5925), 349-352 (2009). 10.1126/science.1159610
8. A. B. Witney, P. G. Sanders, J. R. Weertman, and J. A. Eastman, " Fatigue of nanocrystalline copper.," Scr. Metall. Mater. 33, 2025 (1995). 10.1016/0956-716X(95)00441-W
9. G. Cao, H. Konishi, and X. Li, " Mechanical properties and microstructure of Mg/SiC nanocomposites fabricated by ultrasonic cavitation based nanomanufacturing., J. Manuf. Sci. Eng. 130 (3), 031105 (2008). 10.1115/1.2823086
10. Y. Yang and X. Li, " Ultrasonic cavitation based nanomanufacturing of bulk aluminum matrix nanocomposites.," J. Manuf. Sci. Eng. 129 (3), 497-501 (2007). 10.1115/1.2714583
11. R. J. Arsenault, L. Wang, and C. R. Feng, " Strengthening of composites due to microstructural changes in the matrix.," Acta Metall. Mater. 39 (1), 47-57 (1991). 10.1016/0956-7151(91)90327-W
12. Y. Yang, J. Lan, and X. Li, " Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy.," Mater. Sci. Eng., A 380 (1-2), 378-383 (2004). 10.1016/j.msea.2004.03.073
13. Y. C. Luo and D. Y. Li, " New wear-resistant material: Nano-TiN/TiC/TiNi composite.," J. Mater. Sci. 36 (19), 4695-4702 (2001). 10.1023/A:1017962601833
14. F. Shehata, A. Fathy, M. Abdelhameed, and S. F. Moustafa, " Preparation and properties of Al2O3 nanoparticle reinforced copper matrix composites by in situ processing.," Mater. Des. 30 (7), 2756-2762 (2009). 10.1016/j.matdes.2008.10.005
15. 3 nanoparticles for wear-resistance materials.," Metall. Mater. Trans. A 37 (12), 3639-3645 (2006). 10.1007/s11661-006-1058-y
16. E. Yarrapareddy and R. Kovacevic, " Synthesis and characterization of laser-based direct metal deposited nano-particles reinforced surface coatings for industrial slurry erosion applications.," Surf. Coat. Technol. 202 (10), 1951-1965 (2008). 10.1016/j.surfcoat.2007.08.032
17. W. T. Tsai, T. H. Lai, and J. T. Lee, " Laser surface alloying of stainless steel with silicon nitride.," Mater. Sci. Eng., A 183 (1-2), 239-245 (1994). 10.1016/0921-5093(94)90908-3
18. D. Lin, S. Suslov, C. Ye, Y. Liao, C. R. Liu, and G. J. Cheng, " Laser assisted embedding of nanoparticles into metallic materials.," Appl. Surf. Sci. 258 (7), 2289-2296 (2012). 10.1016/j.apsusc.2011.09.132
19. P. Ballard, J. Fournier, R. Fabrro, and J. Frelat, " Residual stresses induced by laser shocks.," J. Phys. IV 01 (C3), 487-494 (1991). 10.1051/jp4:1991369
20. H. P. Klug and L. E. Alexander J. Appl. Crystallogr. 8 (573), 4 (1975).
21. S. Das, " Physical aspects of process control in selective laser sintering of metals.," Adv. Eng. Mater. 5 (10), 701-711 (2003). 10.1002/adem.200310099
22. J. P. Kruth, P. Mercelis, J. Van Vaerenbergh, L. Froyen, and M. Rombouts, " Binding mechanisms in selective laser sintering and selective laser melting.," Rapid Prototyping J. 11 (1), 26-36 (2005). 10.1108/ 13552540510573365
23. Y. P Kathuria, " Microstructuring by selective laser sintering of metallic powder.," Surf. Coat. Technol. 116-119, 643-647 (1999). 10.1016/S0257-8972(99)00266-2
24. C. Ye, Y. Liao, and G. J. Cheng, " Warm laser shock peening driven nanostructures and their effects on fatigue performance in aluminum alloy 6160.," Adv. Eng. Mater. 12 (4), 291-297 (2010). 10.1002/adem.200900290
25. R. Fabbro, J. Fournier, P. Ballard, D. Devaux, and J. Virmont, " Physical study of laser-produced plasma in confined geometry.," J. Appl. Phys. 68 (2), 775-784 (1990). 10.1063/1.346783
26. K Ding and L Ye, Laser Shock Peening: Performance and Process Simulation (Woodhead, Cambridge, UK, 2006).
27. Y. Liao, S. Suslov, C. Ye, and G. J. Cheng, " The mechanisms of thermal engineered laser shock peening for enhanced fatigue performance.," Acta Mater. 60 (13-14), 4997-5009 (2012). 10.1016/j.actamat.2012.06.024
28. P. Peyre, R. Fabbro, P. Merrien, and H. P. Lieurade, " Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour.," Mater. Sci. Eng., A 210 (1-2), 102-113 (1996). 10.1016/0921-5093(95)10084-9
29. E. Ganin, Y. Komem, and A. Rosen, " Shock induced hardness in α-iron.," Mater. Sci. Eng. 33 (1), 1-4 (1978). 10.1016/0025-5416(78) 90148-9
30. D. A. Hughes and N. Hansen, " High angle boundaries formed by grain subdivision mechanisms.," Acta Mater. 45 (9), 3871-3886 (1997). 10.1016/S1359-6454(97)00027-X
31. C. O. Mgbokwere, S. R. Nutt, and J. Duffy, " Shear band formation in 4340 steel: A TEM study.," Mech. Mater. 17 (2-3), 97-110 (1994). 10.1016/0167-6636(94)90052-3
32. 3 nanocomposites.," Acta Mater. 55 (15), 5115-5121 (2007). 10.1016/j.actamat.2007.05.032
33. M. De Cicco, H. Konishi, G. Cao, H. Choi, L.-S. Turng, J. Perepezko, S. Kou, R. Lakes, and X. Li, " Strong, ductile magnesium-zinc nanocomposites.," Metall. Mater. Trans. A 40 (12), 3038-3045 (2009). 10.1007/s11661-009-0013-0
34. Z. Zhang and D. L. Chen, " Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength.," Scr. Mater. 54 (7), 1321-1326 (2006). 10.1016/j.scriptamat.2005.12.017
35. T. W. Clyne and P. J. Withers, An Introduction to Metal Matrix Composites, Cambridge Solid State Science Series (Cambridge University Press, 1993), pp. 371-372.
36. M. F. Ashby and L. Johnson, " On the generation of dislocations at misfitting particles in a ductile matrix.," Philos. Mag. 20 (167), 1009-1022 (1969). 10.1080/14786436908228069
37. R. J. Arsenault and N. Shi, " Dislocation generation due to differences between the coefficients of thermal expansion.," Mater. Sci. Eng. 81, 175-187 (1986). 10.1016/0025-5416(86)90261-2
38. Y. K. Zhang, J. Z. Lu, X. D. Ren, H. B. Yao, and H. X. Yao, " Effect of laser shock processing on the mechanical properties and fatigue lives of the turbojet engine blades manufactured by LY2 aluminum alloy.," Mater. Des. 30 (5), 1697-1703 (2009). 10.1016/j.matdes.2008.07.017
39. D. Devaux, R. Fabbro, L. Tollier, and E. Bartnicki, " Generation of shock waves by laser-induced plasma in confined geometry.," J. Appl. Phys. 74 (4), 2268-2273 (1993). 10.1063/1.354710
40. K. Luo, J. Lu, L. Zhang, J. Zhong, H. Guan, and X. Qian, " The microstructural mechanism for mechanical property of LY2 aluminum alloy after laser shock processing.," Mater. Des. 31 (5), 2599-2603 (2010). 10.1016/j.matdes.2009.11.026
41. I. Nikitin and M. Besel, " Residual stress relaxation of deep-rolled austenitic steel.," Scr. Mater. 58 (3), 239-242 (2008). 10.1016/j.scriptamat.2007.09.045
42. B. Pinheiro, J. Lesage, I. Pasqualino, N. Benseddiq, and E. Bemporad, " X-ray diffraction study of microstructural changes during fatigue damage initiation in steel pipes.," Mater. Sci. Eng., A 532, 158-166 (2012). 10.1016/j.msea.2011.10.077
43. I. Shao, P. M. Vereecken, C. L. Chien, P. C. Searson, and R. C. Cammarata, " Synthesis and characterization of particle-reinforced Ni/Al2O3 nanocomposites.," J. Mater. Res. 17 (06), 1412-1418 (2002). 10.1557/JMR.2002.0210
44. L. Thilly, M. Véron, O. Ludwig, and F. Lecouturier, " Deformation mechanism in high strength Cu/Nb nanocomposites.," Mater. Sci. Eng., A 309-310, 510-513 (2001). 10.1016/S0921-5093(00)01661-0
45. L. Thilly, M. Véron, O. Ludwig, F. Lecouturier, J. P. Peyrade, and S. Askénazy, " High-strength materials: in-situ investigations of dislocation behaviour in Cu-Nb multifilamentary nanostructured composites.," Philos. Mag. A 82 (5), 925-942 (2002). 10.1080/ 01418610208240010
46. A. Sanaty-Zadeh, " Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall-Petch effect.," Mater. Sci. Eng., A 531, 112-118 (2012). 10.1016/j.msea.2011.10.043
47. Z. Zhang and D. L. Chen, " Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites.," Mater. Sci. Eng., A 483-484, 148-152 (2008). 10.1016/j.msea.2006.10.184
48. E. Nembach, Particle Strengthening of Metals and Alloys (John Wiley, New York, 1997).
49. Y. Harada and K. Mori, " Effect of processing temperature on warm shot peening of spring steel.," J. Mater. Process. Technol. 162-163, 498-503 (2005). 10.1016/j.jmatprotec.2005.02.095
50. J. Y. Hwang, A. Neira, T. W. Scharf, J. Tiley, and R. Banerjee, " Laser-deposited carbon nanotube reinforced nickel matrix composites.," Scr. Mater. 59 (5), 487-490 (2008). 10.1016/j.scriptamat.2008.04.032
51. C. Ye and G. J. Cheng, Laser shock peening of nanoparticles integrated alloys: Numerical simulation and experiments.," J. Manuf. Sci. Eng. 132 (6), 061017 (2010). 10.1115/1.4003124