Cost-Effective FPGA instrument for harmonic and interharmonic monitoring

IEEE Transactions on Instrumentation and Measurement

Volumn 62, Issue 8, 2013, Pages 2161-2170

  Betta, Giovanni ^a   Ferrigno, Luigi ^a   Laracca, Marco ^a  

^a UNIVERSITY OF CASSINO AND SOUTHERN LAZIO   (Italy)

Author keywords

Digital filters; field programmable gate arrays; harmonic analysis; power quality; signal processing

Indexed keywords

ELECTRICAL POWER SYSTEM; EXPERIMENTAL CHARACTERIZATION; FREQUENCY DEVIATION; LARGE-SCALE MONITORING; MEASUREMENT ALGORITHMS; MEASUREMENT INSTRUMENTS; REAL ENVIRONMENTS; SAMPLING FREQUENCY SYNCHRONIZATION;

COMPUTER HARDWARE; COST EFFECTIVENESS; DIGITAL FILTERS; ELECTRIC POWER SYSTEMS; FIELD PROGRAMMABLE GATE ARRAYS (FPGA); FIRMWARE; HARDWARE; HARMONIC ANALYSIS; INSTRUMENTS; POWER QUALITY; RECONFIGURABLE ARCHITECTURES; REGULATORY COMPLIANCE; SIGNAL PROCESSING; SIGNAL RECEIVERS;

RECONFIGURABLE HARDWARE;

EID: 84880571567     PISSN: 00189456     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIM.2013.2264862     Document Type: Article

References (35)

1. D. Castaldo, A. Ferrero, S. Salicone, and A. Testa, "A power-quality index based on multi-points measurements," in Proc. IEEE Bologna Powertech, Bologna, Italy, Jun. 2003, pp. 1-5.
2. S. Vlahinic, D. Brnobic, and N. Stojkovic, "Indices for harmonic distortion monitoring of power distribution systems," IEEE Trans. Instrum. Meas., vol. 58, no. 5, pp. 1771-1777, May 2009.
3. O. N. Gerek and D. G. Ece, "An adaptive statistical method for power quality analysis," IEEE Trans. Instrum. Meas., vol. 54, no. 1, pp. 184-191, Feb. 2005. (Pubitemid 40181652)
4. C. Muscas, L. Peretto, S. Sulis, and R. Tinarelli, "Investigation on multipoint measurement techniques for PQ monitoring," IEEE Trans. Instrum. Meas., vol. 55, no. 5, pp. 1684-1690, Oct. 2006. (Pubitemid 44489682)
5. L. Chiung-Chou, Y. Hong-Tzer, and C. Hsueh-Hsien, "Denoising techniques with a spatial noise-suppression method for wavelet-based power quality monitoring," IEEE Trans. Instrum. Meas., vol. 60, no. 6, pp. 1986-1996, Jun. 2011.
6. L. Cristaldi, A. Ferrero, and S. Salicone, "A distributed system for electric power quality measurement," IEEE Trans. Instrum. Meas., vol. 51, no. 4, pp. 776-781, Apr. 2002. (Pubitemid 35369695)
7. G. Bucci, E. Fiorucci, C. Landi, and G. Ocera, "The use of wireless network for distributed measurement applications," in Proc. IEEE Instrum. Meas. Technol. Conf., Anchorage, AK, USA, May 2002, pp. 1757-1762.
8. S. Chen, "Open design of networked power quality monitoring systems," IEEE Trans. Instr. Meas., vol. 53, no. 2, pp. 597-601, Apr. 2004.
9. T. Radil, P. M. Ramos, F. M. Janeiro, and A. C. Serra, "PQ monitoring system for real-time detection and classification of disturbances in a single-phase power system," IEEE Trans. Instrum. Meas., vol. 57, no. 8, pp. 1725-1733, Aug. 2008.
10. F. Ponci and A. A. Deshmukh, "A mobile agent for measurements in distributed power electronic systems," IEEE Trans. Instrum. Meas., vol. 58, no. 5, pp. 1657-1669, May 2009.
11. S. Cobreces, E. J. Bueno, D. Pizarro, F. J. Rodriguez, and F. Huerta, "Grid impedance monitoring system for distributed power generation electronic interfaces," IEEE Trans. Instrum. Meas., vol. 58, no. 9, pp. 3112-3121, Sep. 2009.
12. M. Albu, E. Kyriakides, G. Chicco, M. Popa, and A. Nechifor, "Online monitoring of the power transfer in a dc test grid," IEEE Trans. Instrum. Meas., vol. 59, no. 5, pp. 1104-1118, May 2010.
13. M. Artioli, G. Pasini, L. Peretto, R. Sasdelli, and F. Filippetti, "Low-cost DSP-based equipment for the real-time detection of transients in power systems," IEEE Trans. Instrum. Meas., vol. 53, no. 4, pp. 933-939, Aug. 2004.
14. G. Bucci, E. Fiorucci, and C. Landi, "A digital instrument for the light flicker effect evaluation," IEEE Trans. Instrum. Meas., vol. 57, no. 1, pp. 76-84, Jan. 2008.
15. D. Gallo, C. Landi, and N. Rignano, "Real-time digital multifunction instrument for power quality integrated indexes measurement," IEEE Trans. Instrum. Meas., vol. 57, no. 12, pp. 2769-2776, Dec. 2008.
16. L. F. Auler and R. D'Amore, "Power quality monitoring controlled through low-cost modules," IEEE Trans. Instrum. Meas., vol. 58, no. 3, pp. 557-562, Mar. 2009.
17. A. Delle Femine, D. Gallo, C. Landi, and M. Luiso, "Power-quality monitoring instrument with FPGA transducer compensation," IEEE Trans. Instrum. Meas., vol. 58, no. 9, pp. 3149-3158, Sep. 2009.
18. IEEE Recommended Practice for Monitoring Electric Power Quality, IEEE Std. 1159, 2009.
19. IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power System, IEEE Std. 519, 1992.
20. Electromagnetic Compatibility-Testing and Measurement Techniques-Power Quality Measurement Methods, Int. Std. IEC 61000-4-30, 2008.
21. Electromagnetic Compatibility-Testing and Measurement Techniques-General Guide on Harmonics and Interharmonics Measurements and Instrumentation, for Power Supply Systems and Equipment Connected thereto, Int. Std. IEC 61000-4-7, 2002.
22. M. Aiello, A. Cataliotti, V. Cosentino, and S. Nuccio, "Synchronization techniques for power quality instruments," IEEE Trans. Instrum. Meas., vol. 56, no. 5, pp. 1511-1519, Oct. 2007. (Pubitemid 47455869)
23. A. Bracale, G. Carpinelli, Z. Leonowicz, T. Lobos, and J. Rezmer, "Measurement of IEC groups and subgroups using advanced spectrum estimation methods," IEEE Trans. Instrum. Meas., vol. 57, no. 4, pp. 672-681, Apr. 2008. (Pubitemid 351460455)
24. L. Ferrigno, C. Landi, M. Laracca, and C. Luongo, "A study on the feasibility and effectiveness of a digital filter approach for harmonic and interharmonic measurements in compliance with IEC 61000-4-7," Metrol. Meas. Syst., vol. XIV, no. 4, pp. 577-593, 2007.
25. P. K. Dash, S. K. Panda, A. C. Liew, and K. S. Lock, "A new approach to monitoring power quality problems in power supply networks," in Proc. Int. Conf. Power Electr. Drive Syst., vol. 2. 1997, pp. 857-861.
26. M. Malekpour, M. Farshadnia, and M. Mojiri, "Monitoring and measurement of power quality indices using an adaptive notch filter," in Proc. 5th Int. PEOCO, 2011, pp. 291-296.
27. L. Jeongkyu, L. Kyeong-Pyo, S. Sang-Wook, and B. Hyeon-Deok, "A singular point detection and localization of power quality disturbance using filter bank and the residuals of adaptive filter," in Proc. 55th IEEE Int. MWSCAS, 2012, pp. 944-947.
28. L. Ferrigno, C. Landi, and M. Laracca, "FPGA-based measurement instrument for power quality monitoring according to IEC Standards," in Proc. IEEE Instrum. Meas. Technol. Conf., Victoria, BC, Canada, 2008, pp. 906-911.
29. C. Orallo, I. Carugati, P. Donato, and S. Maestri, "Harmonics measurement with a modulated sliding DFT algorithm on an FPGA platform," in Proc. Argentine School Micro-Nanoelectr. Technol. Appl. (EAMTA), 2012, pp. 40-46.
30. A. Cardenas, C. Guzman, and K. Agbossou, "Real-time evaluation of power quality using FPGA based measurement system," in Proc. IEEE ISIE, 2010, pp. 2777-2782.
31. S. Folea, G. Mois, and L. Miclea, "Power quality measurement system using FPGAs," in Proc. 13th Int. Conf. OPTIM, 2012, pp. 1280-1285.
32. Electromagnetic Compatibility-Limits for harmonic current emissions-equipment input current up to and including 16A per phase, Int. Std. IEC 61000-3-2, Nov. 2005.
33. Voltage Characteristics of the Electricity Supplied by Public Distribution Systems, CENELEC, EN 50160, Nov. 1999.
34. Electromagnetic compatibility (EMC)-Part 2-4: Environment-Compatibility levels in industrial plants for low-frequency conducted disturbances, Int. Std. IEC 61000-2-4, Jun. 2002.
35. Electricity metering equipment (a.c.)-Particular requirements-Part 21: Static meters for active energy (classes 1 and 2), Int. Std. IEC 62053-21, Jan. 2003.