Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method

Materials and Design

Volumn 52, Issue , 2013, Pages 957-965

  Aldahdooh, M A A ^a   Muhamad Bunnori, N ^a   Megat Johari, M A ^a  

^a SCHOOL OF PHYSICS   (Malaysia)

Author keywords

Central composite design method; Compressive strength; Mechanical properties; Ultra high performance fiber reinforced concrete; Workability

Indexed keywords

BINDERS; COMPRESSIVE STRENGTH; ENERGY UTILIZATION; FIBER REINFORCED MATERIALS; GREENHOUSE GASES; MECHANICAL PROPERTIES; REINFORCED CONCRETE; SILICA FUME; SURFACE PROPERTIES; TENSILE STRENGTH;

CAPILLARY POROSITY; CENTRAL COMPOSITE DESIGNS; DIRECT TENSILE STRENGTHS; ELECTRICAL ENERGY CONSUMPTION; ORDINARY PORTLAND CEMENT; RESPONSE SURFACE METHOD; SUPERPLASTICIZERS; WORKABILITY;

BENDING STRENGTH;

BENDING; BINDERS; COMPOSITES; COMPRESSION STRENGTH; GREENHOUSE GASES; MECHANICAL PROPERTIES; REINFORCED CONCRETE; SURFACE PROPERTIES; TENSILE STRENGTH;

EID: 84880379201     PISSN: 02613069     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2013.06.034     Document Type: Article

References (37)

1. Brühwiler E, Denarié E. Rehabilitation of concrete structures using ultra-high performance fibre reinforced concrete. In: Proc, Second Int Symp Ultra-high Perform Concr; 2008.
2. Iskhakov I., Ribakov Y., Holschemacher K., Mueller T. High performance repairing of reinforced concrete structures. Mater Des 2013, 44:216-222.
3. Diao B., Yang S. Influence of curing regime on the ductility of ultra-high performance fiber reinforced concrete (UHPFRC). ICCTP 2009, 1-7.
4. Bayramov F., Taşdemir C., Taşdemir M. Optimisation of steel fibre reinforced concretes by means of statistical response surface method. Cement Concr Compos 2004, 26(6):665-675.
5. Fardis MN. Innovative materials and techniques in concrete construction: ACES Workshop. University of Patras: Springer Dordrecht Heidelberg London New York; 2012.
6. Wille K., Naaman A.E., Parra-Montesinos G.J. Ultra-high performance concrete with compressive strength exceeding 150MPa (22ksi): a simpler way. ACI Mater J 2011, 108(1):46-54.
7. Spasojević A. Structural implications of ultra-high performance fibre-reinforced concrete in bridge design. Ph.D. thesis, EPFL; 2008.
8. Benson S., Karihaloo B. CARDIFRC®-development and mechanical properties. Part III: Uniaxial tensile response and other mechanical properties. Mag Concr Res 2005, 57(8):433-443.
9. Richard P., Cheyrezy M. Composition of reactive powder concretes. Cem Concr Res 1995, 25(7):1501-1511.
10. Habel K., Gauvreau P. Response of ultra-high performance fiber reinforced concrete (UHPFRC) to impact and static loading. Cement Concr Compos 2008, 30(10):938-946.
11. Worrell E., Price L., Martin N., Hendriks C., Meida L.O. Carbon dioxide emissions from the global cement industry 1. Annu Rev Energy Environ 2001, 26(1):303-329.
12. Arshad MF. Influence of multiple blended binders on engineering properties and durability of concrete Ph.D thesis. Malaysia: Universiti Sains Malaysia; 2010.
13. Thomas H.B. Particle packing; an effective approach to optimized design of ultra high strength and self compacting concretes 2011, University of New South Wales, Australia.
14. Gopinath S., Murthy A.R., Ramya D., Iyer N.R. Optimised mix design for normal strength and high performance concrete using particle packing method. Arch Civ Eng 2011, 4:357-371.
15. Simon MJ, Lagergren ES, Snyder KA. Concrete mixture optimization using statistical mixture design methods. In: Proc PCI/FHWA Int Symp High Perform, Concr; 1997. p. 230-44.
16. Haghighi A, Koohkan MR, Shekarchizadeh M. Optimizing mix proportions of reactive powder concrete using group method of data handling and genetic programming. In: 32nd Conf Our World Concr Struct. Singapore; 2007.
17. De Larrard F., Sedran T. Optimization of ultra-high-performance concrete by the use of a packing model. Cem Concr Res 1994, 24(6):997-1009.
18. Mehta P.K. High-performance, high-volume fly ash concrete for sustainable development. International workshop on sustainable development and concrete technology 2004, 3-14. Kejin Wang Beijing, California, Berkeley, USA. C. Uo (Ed.).
19. Benson S., Karihaloo B. CARDIFRC®-development and mechanical properties. Part I: Development and workability. Mag Concr Res 2005, 57(6):347-352.
20. Sata V., Jaturapitakkul C., Kiattikomol K. Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete. Constr Build Mater 2007, 21(7):1589-1598.
21. Montgomery D.C. Design and analysis of experiments 2008, Wiley.
22. Tayeh B.A., Abu Bakar B., Megat Johari M., Voo Y.L. Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay. Constr Building Mater 2012, 36:538-548.
23. Auta M., Hameed B.H. Optimized waste tea activated carbon for adsorption of Methylene Blue and Acid Blue 29 dyes using response surface methodology. Chem Eng J 2011, 175:233-243.
24. Committee A., Institute A.C., Standardization IOf Building code requirements for structural concrete (ACI 318-08) and commentary 2008, American Concrete Institute.
25. Toledo Filho R.D., Koenders E.A.B., Formagini S., Fairbairn E.M.R. Performance assessment of ultra high performance fiber reinforced cementitious composites in view of sustainability. Mater Des 2012, 36(0):880-888.
26. British Standard Institution. BSI EN 12390-3, Testing hardened concrete. Compressive strength of test specimens. London: BSI; 2002.
27. Li V.C., Horikoshi T., Ogawa A., Torigoe S., Saito T. Micromechanics-based durability study of polyvinyl alcohol-engineered cementitious composite. ACI Mater J 2004, 101(3):242-248.
28. Jolicoeur C., Simard M.A. Chemical admixture-cement interactions: phenomenology and physico-chemical concepts. Cement Concr Compos 1998, 20(2):87-101.
29. Yurdakul E. Optimizing concrete mixtures with minimum cement content for performance and sustainability. Ph.D Thesis, Iowa State University; 2010.
30. Shilstone J.M., Shilstone J. Performance-based concrete mixtures and specifications for today. Concr Int 2002, 24(2):80-83.
31. Schnütgen B, Vandewalle L. In: Proc 31: international RILEM workshop on test and design methods for steel fibre reinforced concrete-background and experiences. RILEM Publications; 2003.
32. Wassermann R., Katz A., Bentur A. Minimum cement content requirements: a must or a myth?. Mater Struct 2009, 42(7):973-982.
33. Alsadey Salahaldein Influence of superplasticizer on strength of concrete. Int J Res Eng Technol 2012, 1(3).
34. lucic vandewalle. Design with σ-ε method, In: Proc 31: international RILEM workshop on test and design methods for steel fibre reinforced concrete-background and experiences. RILEM Publications; 2003.
35. Chan Y.-W., Chu S.-H. Effect of silica fume on steel fiber bond characteristics in reactive powder concrete. Cement and Concrete Research. 2004, 34(7):1167-1172.
36. Ghafari S., Aziz H.A., Isa M.H., Zinatizadeh A.A. Application of response surface methodology (RSM) to optimize coagulation-flocculation treatment of leachate using poly-aluminum chloride (PAC) and alum. J Hazard Mater 2009, 163(2):650-656.
37. Graybeal BA. Material property characterization of ultra-high performance concrete. Ph.D thesis. McLean; 2007.