Phase current reconstruction using a single current sensor of three-phase AC motors fed by SVM-controlled direct matrix converters

IEEE Transactions on Industrial Electronics

Volumn 60, Issue 12, 2013, Pages 5497-5505

  Metidji, Brahim ^a   Taib, Nabil ^a   Baghli, Lotfi ^b,c   Rekioua, Toufik ^a   Bacha, Seddik ^d,e  

^a UNIVERSITY OF BEJAIA   (Algeria)

^b UNIVERSITY OF TLEMCEN   (Algeria)

^c UNIVERSITÉ DE LORRAINE   (France)

^d LABORATOIRE D ELECTROTECHNIQUE DE GRENOBLE   (France)

^e UNIV GRENOBLE ALPES   (France)

Author keywords

AC motor; current sampling; direct matrix converter (DMC); phase current reconstruction; single current sensor; space vector modulation (SVM)

Indexed keywords

AC MOTORS; COST REDUCTION; INDUCTION MOTORS; MODULATION; POWER CONVERTERS; SENSORS;

CURRENT SAMPLINGS; MATRIX CONVERTER; PHASE CURRENTS; SINGLE CURRENT SENSORS; SPACE VECTOR MODULATIONS (SVM);

VECTOR SPACES;

EID: 84880319444     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2012.2232252     Document Type: Article

References (42)

1. L. Gyugyi and B. R. Pelly, Static Power Frequency Changers. New York: Wiley, 1976.
2. M. Venturini, "A new sine wave in sine wave out conversion technique which eliminates reactive elements," in Proc. Powercon 7, San Diego, CA, 1980, pp. E3-1, E3-15.
3. L. Huber and D. Borojevic, "Space vector modulated three-phase to threephase matrix converter with input power factor correction," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1234-1246, Nov./Dec. 1995.
4. S. Bouchiker, G.-A. Capolino, and M. Poloujadoff, "Vector control of a permanent-magnet synchronous motor using AC-AC matrix converter," IEEE Trans. Power Electron., vol. 13, no. 6, pp. 1089-1099, Nov. 1998. (Pubitemid 128742360)
5. D. Casadei, G. Serra, and A. Tani, "The use of matrix converters in direct torque control of induction machines," IEEE Trans. Ind. Electron., vol. 48, no. 6, pp. 1057-1064, Dec. 2001. (Pubitemid 33149158)
6. J. L. Galvez, X. Jorda, M. Vellvehi, J. Millan, M. A. Jose-Prieto, and J. Martin, "Intelligent bidirectional power switch module for matrix converter applications," in Proc. 12th Eur. Conf. EPE, Aalborg, Denmark, Sep. 2-5, 2007, pp. 1-9.
7. C. Klumpner, P. Nielsen, I. Boldea, and F. Blaabjerg, "New solutions for a low-cost power electronic building block for matrix converters," IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 336-344, Apr. 2002. (Pubitemid 34711836)
8. N. Taïb, B. Metidji, T. Rekioua, and B. Francois, "Novel low-cost selfpowered supply solution of bidirectional switch gate driver for matrix converters," IEEE Trans. Ind. Electron., vol. 59, no. 1, pp. 211-219, Jan. 2012.
9. X. Wang, H. Lin, H. She, and B. Feng, "A research on space vector modulation strategy for matrix converter under abnormal input-voltage conditions," IEEE Trans. Ind. Electron., vol. 59, no. 1, pp. 93-104, Jan. 2012.
10. F. Schafmeister and J. W. Kolar, "Novel hybrid modulation schemes significantly extending the reactive power control range of all matrix converter topologies with low computational effort," IEEE Trans. Ind. Electron, vol. 59, no. 1, pp. 194-210, Jan. 2012.
11. T. D. Nguyen and H.-H. Lee, "Modulation strategies to reduce commonmode voltage for indirect matrix converters," IEEE Trans. Ind. Electron., vol. 59, no. 1, pp. 129-140, Jan. 2012.
12. R. Cárdenas, R. Peña, P. Wheeler, and J. Clare, "Experimental validation of a space-vector-modulation algorithm for four-leg matrix converters," IEEE Trans. Ind. Electron, vol. 58, no. 4, pp. 1282-1293, Apr. 2011.
13. S. Kwak, "Four-leg based fault-tolerant matrix converter schemes based on switching function and space vector methods," IEEE Trans. Ind. Electron, vol. 59, no. 1, pp. 235-243, Jan. 2012.
14. H. She, H. Lin, B. He, L. Yue, and X. An, "Implementation of voltagebased commutation in space-vector-modulated matrix converter," IEEE Trans. Ind. Electron, vol. 59, no. 1, pp. 154-166, Jan. 2012.
15. J. T. Boys, "Novel current sensor for PWM AC drives," Proc. Inst. Elect. Eng. B-Elect. Power Appl., vol. 135, no. 1, pp. 27-32, Jan. 1988. (Pubitemid 18566920)
16. F. Petruzziello, G. Joos, and P. D. Ziogas, "Some implementation aspects of line current reconstruction in three phasePWMinverters," in Proc. 16th Annu. IEEE IECON, Pacific Grove, CA, Nov. 27-30, 1990, pp. 1149-1154.
17. F. Blaabjerg and J. K. Pedersen, "An ideal PWM-VSI inverter using only one current sensor in the DC-link," in Proc. 5th Int. Conf. PEVD, London, U.K., Oct. 26-28, 1994, pp. 458-464.
18. F. Blaabjerg, J. K. Pedersen, U. Jaeger, and P. Thoegersen, "Single current sensor technique in the DC link of three-phase PWM-VS inverters: A review and a novel solution," IEEE Trans. Ind. Appl., vol. 33, no. 5, pp. 1241-1253, Sep./Oct. 1997. (Pubitemid 127828262)
19. H.-G. Joo, M.-J. Youn, and H.-B. Shin, "Estimation of phase currents from a DC-link current sensor using space vector PWM method," Elect. Mach. Power Syst., vol. 28, no. 11, pp. 1053-1069, 2000.
20. Y. Gu, F. Ni, D. Yang, and H. Liu, "Switching state phase shift method for three-phase current reconstruction with a single DC-link current sensor," IEEE Trans. Ind. Electron., vol. 58, no. 11, pp. 5186-5194, Nov. 2011.
21. J. F. Moynihan, S. Bolognani, R. C. Kavanagh, M. G. Egan, and J. M. D. Murphy, "Single sensor current control of AC servo drives using digital signal processors," in Proc. 15th Eur. Conf. Power Electron. Appl., Brighton, U.K., Sep. 1993, vol. 4, pp. 415-421.
22. M. Riese, "Phase current reconstruction of a three-phase voltage source inverter fed drive using a sensor in the DC link," in Proc. PCIM Conf., 1996, pp. 95-102.
23. T. M. Wolbank and P. Macheiner, "An improved observer-based current controller for inverter fed AC machines with single DC-link current measurement," in Proc. IEEE PESC, Cairns, Australia, Jun. 23-27, 2002, pp. 1003-1008. (Pubitemid 35411181)
24. T. M. Wolbank and P. Macheiner, "Scheme to reconstruct phase current information of inverter fed AC drives," IEE Electron. Lett., vol. 38, no. 5, pp. 204-205, Feb. 2002. (Pubitemid 34221166)
25. T. M. Wolbank and P. Macheiner, "Current controller with single DC link current measurement for inverter fed AC machines based on an improved observer structure," IEEE Trans. Power Electron., vol. 19, no. 6, pp. 1562-1567, 2004.
26. H. R. Kim and T. M. Jahns, "Phase current reconstruction for ac motor drives using a dc-link single current sensor and measurement voltage vectors," in Proc. 36th IEEE PESC, Recife, Brazil, Jun. 2005, pp. 1346-1352. (Pubitemid 46379349)
27. W. Jiang and B. Fahimi, "Current reconstruction techniques for survivable three-phase PWM converters," IEEE Trans. Power Electron., vol. 25, no. 1, pp. 188-192, Jan. 2010.
28. S. N. Vukosavic and A. M. Stankovic, "Sensorless induction motor drive with a single DC-link current sensor and instantaneous active and reactive power feedback," IEEE Trans. Ind. Electron., vol. 48, no. 1, pp. 195-204, Feb. 2001. (Pubitemid 32271133)
29. B. Metidji, N. Taib, L. Baghli, T. Rekioua, and S. Bacha, "Low-cost direct torque control algorithm for induction motor without AC phase current sensors," IEEE Trans. Power Electron., vol. 27, no. 9, pp. 4131-4139, Sep. 2012.
30. D. P. Marcetic and E. M. Adžic, "Improved three-phase current reconstruction for induction motor drives with DC-link shunt," IEEE Trans. Ind. Electron., vol. 57, no. 7, pp. 2454-2462, Jul. 2010.
31. Y. Cho, T. LaBella, and J.-S. Lai, "A three-phase current reconstruction strategy with online current offset compensation using a single current sensor," IEEE Trans. Ind. Electron., vol. 59, no. 7, pp. 2924-2933, Jul. 2012.
32. J. F. Moynihan, R. C. Kavanagh, M. G. Egan, and J. M. D. Murphy, "Indirect phase current detection for field oriented control of a permanent magnet synchronous motor drive," in Proc. 4th EPE, Florence, Italy, Sep. 3-6, 1991, pp. 641-646.
33. B. Saritha and P. A. Janakiraman, "MATLAB simulation of current control of PMSM using single sensor technology," presented at the IEEE Int. Conf. PEDES, Delhi, India, Dec., 2006, Paper 3D-01.
34. M. Bertoluzzo, G. Buja, and R. Menis, "Direct torque control of permanent magnet motors using a single current sensor," IEEE Trans. Ind. Electron., vol. 53, no. 3, pp. 778-784, Jun. 2006. (Pubitemid 43834596)
35. K. Sun, Q. Wei, L. Huang, and K. Matsuse, "An overmodulation method for PWM-inverter-fed IPMSM drive with single current sensor," IEEE Trans. Ind. Electron., vol. 57, no. 10, pp. 3395-3404, Oct. 2010.
36. J.-I. Ha, "Current prediction in vector-controlled PWM inverters using single DC-link current sensor," IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 716-726, Feb. 2010.
37. R. C. Kavanagh, J. M. D. Murphy, and M. G. Egan, "Innovative current sensing for brushless DC drives," in Proc. 3rd Int. Conf. PEVD, London, U.K., Jul. 13-15, 1988, pp. 354-357.
38. C. D. French, P. P. Acarnley, and A. G. Jack, "Real-time current estimation in brushless dc drives using a single DC link current sensor," in Proc. 5th Euro. Conf. EPE, Brighton, U.K., Sep. 1993, pp. 445-450.
39. G. Gallegos-lopez and P. C. Kjaer, "Single-sensor current regulation in switched reluctance motor drives," IEEE Trans. Ind. Appl., vol. 34, no. 3, pp. 444-451, May/Jun. 1998. (Pubitemid 128740173)
40. P.W. Wheeler, J. C. Clare, L. Empringharn,M. Bland, andM. Apap, "Gate drive level intelligence and current sensing for matrix converter current commutation," IEEE Trans. Ind. Electron., vol. 49, no. 2, pp. 382-389, Apr. 2002. (Pubitemid 34711841)
41. P. W. Wheeler, J. Clare, and L. Empringham, "Enhancement of matrix converter output waveform quality using minimized commutation times," IEEE Trans. Ind. Electron., vol. 51, no. 1, pp. 240-244, Feb. 2004.
42. D. Casadei, G. Serra, A. Tani, and L. Zarri, "Optimal use of zero vectors for minimizing the output current distortion in matrix converters," IEEE Trans. Ind. Electron, vol. 56, no. 2, pp. 326-336, Feb. 2009.