Fire endurance and residual strength of insulated concrete beams strengthened with near-surface mounted reinforcement

Journal of Composites for Construction

Volumn 17, Issue 4, 2013, Pages 454-462

  Palmieri, Aniello ^a   Matthys, Stijn ^a   Taerwe, Luc ^a  

^a GHENT UNIVERSITY   (Belgium)

Author keywords

Fiber reinforced polymer; Fire safety; Insulation; Near surface mounted (NSM); Residual strength; Strengthening; Structural members

Indexed keywords

BEAM CONFIGURATION; FIBER REINFORCED POLYMERS; FIRE RESISTANCE TEST; FIRE SAFETY; NEAR SURFACE MOUNTED; NEAR-SURFACE MOUNTED REINFORCEMENT; RESIDUAL PERFORMANCE; RESIDUAL STRENGTH;

CONCRETE BEAMS AND GIRDERS; FIBER REINFORCED PLASTICS; FIRE RESISTANCE; INSULATION; STRENGTHENING (METAL); STRUCTURAL MEMBERS;

FIRES;

EID: 84880300699     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CC.1943-5614.0000338     Document Type: Article

References (32)

1. American Concrete Institute (ACI). (2008). " Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures." ACI 440.2R-08, ACI Committee 440, Farmington Hills, MI.
2. Bisby, L. A., Green, M. F., and, Kodur, V. K. R. (2005). " Fire endurance of fiber-reinforced polymer-confined concrete columns." ACI Struct. J. ASTJEG 0889-3241, 102 (6), 883-891.
3. Blontrock, H., Taerwe, L., and, Matthys, S. (1999). " Properties of fibre reinforced plastics at elevated temperatures with regard to fire resistance of reinforced concrete members." ACI Struct. J. ASTJEG 0889-3241, 188 (5), 43-54.
4. Blontrock, H., Taerwe, L., and, Vandevelde, P. (2001). " Fire testing of concrete slabs strengthened with fibre composite laminates." Proc., FRPRCS-5, C. Burgoyne., ed., Thomas Telford Publishing, London, 547-556.
5. Burke, P. J., Bisby, L. A., and, Green, M. F. (2013). " Effect of elevated temperature on near surface mounted and externally bonded FRP strengthening systems for concrete." Cement Concr. Compos., 35 (1), 190-199.
6. Chowdhury, E. U., Bisby, L. A., Green, M. F., and, Kodur, V. K. R. (2008). " Residual behaviour of fire-exposed reinforced concrete beams prestrengthened in flexure with fiber-reinforced polymer sheets." J. Compos. Constr. JCCOF2 1090-0268, 12 (1), 61-68. 10.1061/(ASCE)1090-0268(2008) 12:1(61)
7. De Lorenzis, L., Lundgren, K., and, Rizzo, A. (2004). " Anchorage length of near-surface mounted FRP bars for concrete strengthening: Experimental investigation and numerical modelling." ACI Struct. J. ASTJEG 0889-3241, 101 (2), 269-278.
8. European Committee for Standardization (CEN). (1999). " Fire resistance tests. Part 1: General requirements." EN-1363-1, Brussels, Belgium.
9. European Committee for Standardization (CEN). (2004). " Eurocode 2. Design of concrete structures. Part 1-1: General rules and rules for buildings." EN-1992-1-1, Brussels, Belgium.
10. Foster, S. K., and, Bisby, L. A. (2008). " Fire survivability of externally-bonded FRP strengthening systems." J. Compos. Constr. JCCOF2 1090-0268, 12 (5), 553-561. 10.1061/(ASCE)1090-0268(2008)12:5(553)
11. International Federation for Structural Concrete (fib). (2001). " Externally bonded FRP reinforcement for RC structures." fib Bulletin 14, fib Task Group 9.3, Lausanne, Switzerland.
12. ISO. (1999 a). " Fire resistance tests. Part 1: Elements of buildings construction-general requirements." ISO 834, Geneva.
13. ISO. (1999 b). " Plastics-differential scanning calorimetry (DSC). Part 2: Determination of glass transition temperature." ISO 11357-2, Geneva.
14. Katz, A., Berman, N., and, Bank, L. (1999). " Effect of high temperature on bond strength of FRP rebars." J. Compos. Constr. JCCOF2 1090-0268, 3 (2), 73-81. 10.1061/(ASCE)1090-0268(1999)3:2(73)
15. Kodur, V., and, Ahmed, A. (2010). " Numerical model for tracing the response of FRP-strengthened RC beams exposed to fire." J. Compos. Constr. JCCOF2 1090-0268, 14 (6), 730-742. 10.1061/(ASCE)CC.1943-5614.0000129
16. Kodur, V., Bisby, L., and, Green, M. F. (2007). " Guidance for the design of FRP-strengthened concrete members exposed to fire." J. Fire Prot. Eng. JFPEEN, 17 (1), 5-16. 10.1177/1042391507061956
17. Kotynia, R. (2005). " Strain efficiency of near-surface mounted CFRP-strengthened reinforced concrete beams." Proc., Int. Conf. on Composites in Construction, P. Hamelin., ed., Univ. Lyon, Lyon, France, 35-42.
18. Nigro, E., Bilotta, A., Cefarelli, G., Manfredi, G., and, Cosenza, E. (2012). " Performance under fire situations of concrete members reinforced with FRP rods: Bond models and design nomograms." J. Compos. Constr. JCCOF2 1090-0268, 16 (4), 395-406. 10.1061/(ASCE)CC.1943-5614.0000279
19. Nigro, E., Cefarelli, G., Bilotta, A., Manfredi, G., and, Cosenza, E. (2011 a). " Fire resistance of concrete slabs reinforced with FRP bars. Part I: Experimental investigations on the mechanical behavior." Compos. B Eng. 1359-8368, 42 (6), 1739-1750. 10.1016/j.compositesb.2011.02.025
20. Nigro, E., Cefarelli, G., Bilotta, A., Manfredi, G., and, Cosenza, E. (2011 b). " Fire resistance of concrete slabs reinforced with FRP bars. Part II: Experimental results and numerical simulations on the thermal field." Compos. B Eng. 1359-8368, 42 (6), 1751-1763. 10.1016/j.compositesb. 2011.02.026
21. Palmieri, A. (2012). " Evaluation and optimization of fire safety of structures strengthened with NSM reinforcement." Ph.D. thesis, Ghent Univ., Ghent, Belgium.
22. Palmieri, A., Matthys, S., and, Taerwe, L. (2010). " Strengthening with near surface mounted reinforcement: Structural and fire behavior." Proc., 3rd fib Int. Congress (fib-2010) (CD ROM), Washington, DC.
23. Palmieri, A., Matthys, S., and, Taerwe, L. (2012). " Experimental investigation on fire endurance of insulated concrete beams strengthened with near surface mounted FRP bar reinforcement." Compos. B Eng. 1359-8368, 43 (3), 885-895. 10.1016/j.compositesb.2011.11.061
24. Raafat, E. H., and, Rizkalla, S. H. (2003). " Investigation of bond in concrete structures strengthened with near surface mounted carbon fiber reinforced polymer strips." J. Compos. Constr. JCCOF2 1090-0268, 7 (3), 248-257. 10.1061/(ASCE)1090-0268(2003)7:3(248)
25. Sena Cruz, J. M., and, Barros, J. (2004). " Bond between near surface mounted carbon-fiber-reinforced polymer laminate strips and concrete." J. Compos. Constr. JCCOF2 1090-0268, 8 (6), 519-527. 10.1061/(ASCE)1090-0268(2004)8:6(519)
26. Seracino, R., Saifulnaz, M. R. R., and, Oehlers, D. J. (2007). " Generic debonding resistance of EB and NSM plate-to-concrete joints." J. Compos. Constr. JCCOF2 1090-0268, 11 (1), 62-70. 10.1061/(ASCE)1090-0268(2007) 11:1(62)
27. Stratford, T. J., and, Bisby, L. (2012). " Effect of warm temperatures on externally bonded FRP strengthening." J. Compos. Constr. JCCOF2 1090-0268, 16 (3), 235-244. 10.1061/(ASCE)CC.1943-5614.0000260
28. Stratford, T. J., Gillie, M., Chen, J. F., and, Usmani, A. S. (2010). " Bonded fibre reinforced polymer strengthening in a real fire." Adv. Struct. Eng. 1369-4332, 12 (6), 867-878. 10.1260/136943309790327743
29. Teng, J. G., De Lorenzis, L., Wang, B., Rong, L., Wong, T. N., and, Lik, L. (2006). " Debonding failures of RC beams strengthened with near surface mounted CFRP strips." J Compos. Construct. 1090-0268, 10 (2), 92-105. 10.1061/(ASCE)1090-0268(2006)10:2(92)
30. Wang, Y. C., Wong, P. M. H., and, Kodur, V. (2007). " An experimental study of the mechanical properties of fibre reinforced polymer (FRP) and steel reinforcing bars at elevated temperatures." Compos. Struct. COMSE2 0263-8223, 80 (1), 131-140. 10.1016/j.compstruct.2006.04.069
31. Weber, A. (2008). " Fire-resistance tests on composite rebars." Proc., CICE2008, M. Motavalli., ed., EMPA, Zurich, Switzerland.
32. Williams, B., Kodur, V., Green, M., and, Bisby, L. (2008). " Fire endurance of fiber-reinforced polymer strengthened concrete T-beams." ACI Struct. J. ASTJEG 0889-3241, 105 (1), 60-67.