The relationship between substrate roughness parameters and bond strength of ultra high-performance fiber concrete

Journal of Adhesion Science and Technology

Volumn 27, Issue 16, 2013, Pages 1790-1810

  Tayeh, Bassam A ^a,b   Bakar, B H Abu ^a   Johari, M A Megat ^a   Ratnam, M M ^a  

^a SCHOOL OF CHEMICAL ENGINEERING   (Malaysia)

^b ISLAMIC UNIVERSITY OF GAZA   (Palestine)

Author keywords

bond strength; pull off test; repair material; roughness parameters; slant shear test; splitting cylinder tensile test; substrate; UHPFC

Indexed keywords

PULL-OFF TESTS; REPAIR MATERIALS; ROUGHNESS PARAMETERS; SHEAR TESTS; UHPFC;

BOND STRENGTH (MATERIALS); CONCRETES; CYLINDERS (SHAPES); POLYMER BLENDS; REPAIR; SUBSTRATES; SURFACE ROUGHNESS; SURFACES; TENSILE TESTING; THREE DIMENSIONAL;

FIBER BONDING;

EID: 84880239706     PISSN: 01694243     EISSN: 15685616     Source Type: Journal    
DOI: 10.1080/01694243.2012.761543     Document Type: Article

References (37)

1. Perez F, Bissonnette B, Courard L. Combination of mechanical and optical profilometry techniques for concrete surface roughness characterisation. Mag. Concr. Res. 2009;61:389-400.
2. Tayeh BA, Abu Bakar BH, Megat Johari MA, Voo YL. Utilization of ultra high performance fibre concrete (UHPFC) for rehabilitation-a review. The 2nd International Conference on Rehabilitation and Maintenance in Civil Engineering (ICRMCE-2); 2012 Mar 8-10; Solo, Indonesia.
3. Vaysburd A, Emmons P. How to make today's repairs durable for tomorrow-corrosion protection in concrete repair. Constr. Build. Mater. 2000;14:189-197.
4. Garbacz A, Courard L, Kostana K. Characterization of concrete surface roughness and its relation to adhesion in repair systems. Mater. Charact. 2006;56:281-289. (Pubitemid 43956576)
5. Courard L, Michel F, Schwall D, Van der Wielen A, Garbacz A. Concrete substrate evaluation prior to repair. Mater. Charact. 2009;64:407-416.
6. Diab H, Wu Z. Nonlinear constitutive model for time-dependent behavior of FRP-concrete interface. Contemp. Eng. Sci. 2007;67:2323-2333. (Pubitemid 46760246)
7. Emmons PH, Vaysburd AM. Factors affecting the durability of concrete repair: the contractor's viewpoint. Constr. Build. Mater. 1994;8:5.
8. Omar B, Fattoum K, Maissen B. Influence of the roughness and moisture of the substrate surface on the bond between old and new concrete. Contemp. Eng. Sci. 2010;3:139-147.
9. Espeche AD, León J. Estimation of bond strength envelopes for old-to-new concrete interfaces based on a cylinder splitting test. Constr. Build. Mater. 2011;25:1222-1235.
10. Duan K, Hu X, Mai YW. Substrate constraint and adhesive thickness effects on fracture toughness of adhesive joints. J. Adhes. Sci. Technol. 2004;18:39-53.
11. Maerz NH, Chepur P, Myers JJ, Linz J. Concrete roughness characterization using laser profilometry for fiber-reinforced polymer sheet application. Transp. Res. Rec. J. Trans. Res. B. 2001;1775: 132-139. (Pubitemid 34504318)
12. Destrebecq JF, Grédiac M, Sierra-Ruiz V. The transfer length in reinforced concrete structures strengthened with composite plates: experimental study and modelling. Compos. Sci. Technol. 2007;67:707-719. (Pubitemid 46024407)
13. Perez F, Bissonnette B, Gagné R. Parameters affecting the debonding risk of bonded overlays used on reinforced concrete slab subjected to flexural loading. Mater. Struct. 2009;42:645-662.
14. Tayeh BA, Abu Bakar BH, Megat Johari MA. Mechanical properties of old concrete-UHPFC interface. International Conference on Concrete Repair, Rehabilitation and Retrofitting III (ICCRRR 2012); 2012 Sep 2-5; Cape Town, South Africa.
15. ISO BS. Geometrical product specifications (GPS)-surface texture: profile method-terms, definitions and surface texture parameters. 1997.
16. ACI-211.1-91, Standard practice for selecting proportions for normal heavyweight, and mass concrete. ACI manual of concrete practice, part 1. American Concrete Institute; 1989.
17. Tayeh BA, Abu Bakar BH, Megat Johari MA, Voo YL. Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay. Constr. Build. Mater. 2012;36:538-548.
18. Askar LK, Tayeh BA, Abu Bakar BH. Effect of different curing conditions on the mechanical properties of UHPFC. Awam International Conference on Civil Engineering (AICCE'12) and Geohazard Information Zonation (GIZ'12); 2012 Aug 28-30; Penang, Malaysia.
19. Mangat P, Catley D. A novel low voltage heating system for curing and protection of early age concrete. Concr. Plant Int. 2005;4:106-112.
20. Gerwick BC. Construction of prestressed concrete structures. New York (NY): John Wiley and Sons; 1993.
21. Erdem T, Turanli L, Erdogan T. An important criterion to determine the length of the delay period before steam curing of concrete. Cem. Concr. Res. 2003;33:741-745.
22. Tayeh BA, Abu Bakar BH, Megat Johari MA. Characterization of the interfacial bond between old concrete substrate and ultra high performance fiber concrete repair composite. Mater. Struct. 2012; doi 10.1617/s11527-012-9931-1.
23. ASTM-C4541. Standard test method for pull-off strength of coatings using portable adhesion testers. West Conshohocken (PA): American Society for Testing and Materials; 1992. 19428-2959.
24. Hindo KR. In-place bond testing and surface preparation of concrete. Concr. Int. 1990;12:46.
25. ASTM-C496. Standard test method for splitting tensile strength of cylindrical concrete. West Conshohocken (PA): American Society for Testing and Materials; 1996. 19428-2959.
26. ASTM-C882. Standard test method for bond strength of epoxy-resin systems used with concrete by slant shear. West Conshohocken (PA): American Society for Testing and Materials; 1999. 19428-2959.
27. Naderi M. Analysis of the slant shear test. J. Adhes. Sci. Technol. 2009;23:229-245.
28. Garbacz A, Gorka M, Courard L. Effect of concrete surface treatment on adhesion in repair systems. Mag. Concr. Res. 2005;57:49-60. (Pubitemid 40178733)
29. Santos PMD, Julio ENBS, Silva VD. Correlation between concrete-to-concrete bond strength and the roughness of the substrate surface. Constr. Build. Mater. 2007;21:1688-1695. (Pubitemid 46367618)
30. Lee MG, Wang YC, Chiu CT. A preliminary study of reactive powder concrete as a new repair material. Constr. Build. Mater. 2007;21:182-189.
31. Julio ENBS, Branco FAB, Silva VD. Concrete-to-concrete bond strength. Influence of the roughness of the substrate surface. Constr. Build. Mater. 2004;18:675-681.
32. Chynoweth G, Stankie RR, Allen WL, Anderson RR, Babcock WN. Concrete repair guide. ACI Committee, Concr. Repair Manual. 1996;546:287-327.
33. Sprinkel MM, Ozyildirim C. Evaluation of high performance concrete overlays placed on route 60 over Lynnhaven inlet in Virginia. Charlottesville (VA): Virginia Transportation Research Council; 2000.
34. Tayeh BA, Abu Bakar BH, Megat Johari MA, Zeyad AM. The role of silica fume in the adhesion of concrete restoration systems. Adv. Mater. Res. 2013;626:265-269.
35. Van Zijl G, Stander H. SHCC repair overlays for RC: interfacial bond characterization and modelling. International Conference on Concrete Repair, Rehabilitation and Retrofitting II (ICCRRR 2009); 2009 Nov; Cape Town, South Africa.
36. Tayeh BA, Abu Bakar BH, Megat Johari MA. Durability enhancement of the strengthened structural system joints. Hong Kong International Conference on Engineering and Applied Science (HKICEAS 2012); 2012 Dec 14-16; Hong Kong.
37. Momayez A, Ehsani MR, Ramezanianpour AA, Rajaie H. Comparison of methods for evaluating bond strength between concrete substrate and repair materials. Cem. Concr. Res. 2005;35:748-757. (Pubitemid 40390988)