Numerical Assessments of Cracks in Elastic-Plastic Materials

Lecture Notes in Applied and Computational Mechanics

Volumn 4, Issue , 2002, Pages 1-311

  Yuan, Huang ^a  

^a MTU AERO ENGINES GMBH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84880142254     PISSN: 16137736     EISSN: None     Source Type: Book Series    
DOI: 10.1007/978-3-540-45882-1     Document Type: Article

References (185)

1. Achenbach, J. D. (1973). Wave Propagation in Elastic Solids, North-Holland Publishers, Amsterdam.
2. Achenbach, J. D. & Bazant, Z. P. (1975). Elastodynamic near tip stress and displacement fields for rapidly propagating cracks in orthotropic materials. Transactions of ASME: Journal of Applied Mechanics, 42, pp. 183-189.
3. Achenbach, J. D. & Kanninen, M. F. (1978). Crack tip plasticity in dynamic fracture mechanics. Fracture Mechanics (Edited by N. Perrone, H. Liebowitz, D. Mulville and W. Pilkey), University of Virginia Press, Virginia, pp. 649-670.
4. Achenbach, J. D., Kanninen, M. F. & Popelar, C. H. (1981). Crack tip fields for fast fracture of an elastic-plastic material. Journal of Mechanics and Physics of Solids, 29, pp. 211-225.
5. Achenbach, J. D. & Dunayevsky, V. (1981). Fields near a rapidly propagating crack tip in an elastic-perfectly plastic material. Journal of Mechanics and Physics of Solids, 29, pp. 283-303.
6. AI-Ani, A. M. & Hancock, J. W. (1991). J-dominance of short cracks in tension and bending. Journal of the Mechanics and Physics of Solids, 39, pp. 23-43.
7. Amazigo, J. C. & Hutchinson, J. W. (1977). Crack tip fields in steady crackgrowth with linear strain-hardening. Journal of Mechanics and Physics of Solids, 25, pp. 81-97.
8. Anderson, T. L. (1995). Fracture Mechanics-Fundamentals and Applications. 2nd Edition. CRC Press, Boca Raton.
9. Aoki, S., Kishimoto, K. & Sakata, M. (1984). Energy flux into process region in elastic-plastic fracture problems. Engineering Fracture Mechanics, 19, pp. 827-836.
10. Aravas, N. & Sharma, S. M. (1991). An elastoplastic analysis of the interface crack with contact zones. Journal of the Mechanics and Physics of Solids, 39, pp. 311-344.
11. American Society for Testing and Materials (1987). Standard test for he, a measure of fracture and toughness. E 1152-87, Annual Book of ASTM Standards.
12. Atkinson, C., Bastero, J. M. & Martinez-Esnaola, J. M. (1988). Stress analysis in sharp angular notches using auxiliary fields. Engineering Fracture Mechanics, 31, pp. 637-646.
13. Aurich, D. et al. (1993). Analyse und Weiterentwicklung bruchmechanischer Versagenskonzepte-Lokales RiBwachstum, Ermittelung des RiBwiderstandsverhalt ens aus der Kerbschlagarbeit. Technical Report 192 (in German), Bundesanstalt fur Materialforschung und-prufung (BAM), Berlin.
14. Barenblatt, G. I. (1982). The mathematical theory of equilibrium cracks in brittle fracture. Advances of Applied Mechanics, 7, pp. 55-129.
15. Begley, J. A. & Landes, J. D. (1971). The J-integral as a fracture criterion. ASTM STP 514, American Society for Testing and Materials, Philadelphia, pp. 1-20.
16. Betegon, C. & Hancock, J. W. (1991). Two-parameter characterization of elastic-plastic crack-tip fields. Transactions of ASME, Journal of Applied Mechanics, 58, pp. 104-110.
17. Ben-Aoun, Z.E. A & Pan, J. (1993). Effects of elasticity and pressure-sensitive yielding on plane-stress crack-tip fields. Engineering Fracture Mechanics, 44, pp. 649-662.
18. Bose, K. & Ponte Castaneda, P. (1992). Stable crack growth under mixed mode conditions. Journal of the Mechanics and Physics of Solids, 40, pp. 1053-1103.
19. Brocks, W. & Olschewski, J. (1986). On J-dominance of crack-tip fields in largely yielded 3D structures. International Journal of Solids and Structures, 22, pp. 693-708.
20. Brocks, W., Erbe, H.-H. & Yuan, H. (1988). Numerical studies of stable crack growth. Failure Analysis Theory and Practice, A, pp. 205-210.
21. Brocks, W. & Yuan, H. (1989). Numerical investigations on the significance of J for large stable crack growth. Engineering Fracture Mechanics, 32, pp. 459-468.
22. Brocks, W. & Schmitt, W. (1993). Quantitative assessment on the role of crack tip constrain on ductile tearing. Constraint Effects in Fracture, ASTM STP 1171 (ed. E.M. Hackett, K.-H. Schwalbe und R.H. Dodds), American Society for Testing and Materials, Philadelphia, pp. 64-78.
23. Brocks, W. (1993). RiBbehaftete Bauteile unter mehrachsiger statischer Belastung (in German). In Proceedings of 25. DVM-Conference on Fracture Processes (ed. D. Munz), German Association for Materials Research and Testing (DVM), Berlin, pp. 311-324.
24. Brocks, W. & Schmitt, W. (1994). The second parameter in J-R curves: constraint or triaxiality. Constraint Effects in Fracture Theory and Applications: Second Volume. ASTM STP 1244, (M. T. Kirk and A. Bakker, eds.), American Society for Testing and Materials, Philadelphia, pp. 209-231.
25. Bruckner-Foit, A., Munz, D. & Nikishkov, G.P. (1994). Beschreibung des RiBspitzenfeldes bei plastischem Werkstoffverhalten mit drei Termen (in German). In Proceedings of 27. DVM-Conference on Fracture Processes (ed. D. Munz), German Association for Materials Research and Testing (DVM), Berlin.
26. Champion, C. R. & Atkinson, C. (1990) A mode III crack at the interface between nonlinear materials. Proceeding of Royal Society London, Series A, 429, pp. 247-257.
27. Champion, C. R. & Atkinson, C. (1991) A crack at the interface between two power-law materials under plane strain loading. Proceedings of Royal Society London, Series A, 432, pp. 547-553.
28. Chao, Y. J. (1993). On a single parameter controlled fracture of solids under plane stress conditions. International Journal of Fracture, 62, pp. R7-R10.
29. Chen, I.-W. & Reyes Morel, P. E. (1986). Implications of transformation plasticity in Zr02-containing ceramics: I. Shear and dilatation effects. Journal of American Ceramics Society, 69, pp. 181-189.
30. Chen, J. & Yuan, H. (2001). A micro mechanical damage model based on gradient plasticity: Finite element algorithms and applications. International Journal of numerical Methods for Engineering, in print.
31. Chen, J., Yuan, H. & Wittmann, F.-K. (2001). Simulations of micro-indentation tests using gradient plasticity models. Computer Simulation for Engineering and Sciences, in print.
32. Chen, J., Yuan, H., Wittmann, F.-K. (2002). Computational assessment of size effects based on a nonlocal damage model. Submitted for publication.
33. Chitaley, A. D. & McClintock, F. A. (1971). Elastic-plastic mechanics of steady crack growth under anti-plane shear, Journal of Mechanics and Physics of Solids, 19, pp. 147-163.
34. Clausmeyer, H., KuBmaul, K. & Roos, E. (1989). Der EinfluBdes Spannungszustandes auf den Versagensablauf angerissener Bauteile aus Stahl (in German). Materialwissenschaften und Werkstofftechniken, 20, pp. 101-117.
35. Clarke, G. A. & Landes, J. D. (1979). Evaluation of the J-integral for the compact specimen. Journal of Testing and Evaluation, 7, pp. 264-269.
36. Comninou, M. (1977). The interface crack. Transactions of ASME: Journal of Applied Mechanics, 44, pp. 631-636.
37. Comninou, M. (1990). An overview of interface cracks. Engineering Fracture Mechanics, 37, pp. 197-208.
38. Cruse, T. A. (1988). Boundary Element Analysis in Computational Fracture Mechanics. Kluwer Academic Publisher, Dordrecht, Boston, Berlin.
39. Dawes, M. G. (1979). Elastic-plastic fracture toughness based on the COD and J-contour integral concepts. Elastic-Plastic Fracture, ASTM STP 668, American Society for Testing and Materials, Philadelphia, pp. 307-333.
40. Deng, X. & Rosakis, A. J. (1991). Dynamic crack propagation in elasticperfectly plastic solids under plane stress conditions. Journal of the Mechanics and Physics of Solids, 39, pp. 683-722.
41. Deuflhard, P. & Bader, G. (1982). Multiple shooting techniques revised. Technical Report 163, University of Heidelberg, SFB 123.
42. Dong, P. & Pan, J. (1991). Elastic-plastic analysis of cracks in pressure-sensitive materials. International Journal of Solids and Structures, 28, pp. 1113-1127.
43. Drucker, D. C. & Prager, W. (1952). Soil mechanics and plastic analysis and limit design. Quarter of Applied Mathematics, 10, pp. 157-165.
44. Drucker, D. C. (1973). Metallurgical Transactions, 37, pp. 667-673.
45. Drugan, W. J. & Rice, J. R. (1984). Restrictions on dynamically propagating surfaces of strong discontinuity in elastic-plastic solids. In Mechanics of Material Behavior: The D. C. Drucker Anniversary Volume, ed. G. J. Dvorak and R. T. Shield, pp.59-73.
46. Drugan, W. J. & Shen, Y. (1987). Restrictions on quasi-statically moving surfaces of strong discontinuity in elastic-plastic solids. Journal of the Mechanics and Physics of Solids, 35, pp. 771-787.
47. Drugan, W. J. (1991). Near-tip fields for quasi-static crack growth along a ductile-brittle interface. Transactions of ASME, Journal of Applied Mechanics, 58, pp. 111-119.
48. Du, Z. Z. and Hancock, J.W. (1991). The effect of non-singular stresses on crack-tip constraint. Journal of the Mechanics and Physics of Solids, 39, pp. 555-567.
49. England, A. H. (1965). A crack between dissimilar media. Transactions of ASME, Journal of Applied Mechanics, 32, pp. 400-402.
50. Erdogan, F. (1965). Stress distribution in bonded dissimilar materials with cracks. Transactions of ASME, Journal of Applied Mechanics, 32, pp. 403-410.
51. Eringen, A. C. (1962). Nonlinear Theory of Continuous Media. McGraw-Hill, New York.
52. Eringen, A. C. & Suhubi, E. S. (1975). Elastodynamics. Academic Press, New York.
53. Ernst. H. A. (1981).:'Iaterial resistance and instability beyond J-controlled crack growth. Elastic-plastic Fracture Mechanics: Vol I-Inelastic Crack Analysis, ASTM STP 803, American Society for Testing and Materials, Philadelphia, pp. 1 191-1 213.
54. Ernst, H. A. (1989). Further development on the modified J-integral. Nonlinear Fracture Mechanics, ASTM STP 995, American Society for Testing and Materials, Philadelphia, pp. 306-319.
55. Eshelby, J. D. (1956). The continuum theory of lattice defects. Solid State Physics, 3, pp. 79-144.
56. ESIS P2/92 (1992). Determing the fracture behaviour of materials. European Structural Integrity Society, Delft, The Netherlands.
57. Fan, T. (1990). Introduction to Dynamic Fracture Mechanics (In Chinese). Beijing University of Technology Press, Peking.
58. Freund, L. B. (1990). Dynamic Fracture Mechanics. Cambridge University Press, Cambridge.
59. Freund, L. B. & Rosakis, A. J. (1992). The structure of the near tip field during transient elastoplastic crack growth. Journal of the Mechanics and Physics of Solids, 40, pp. 699-719.
60. Garwood, S. J., Robinson, J. N. & Turner, C. E. (1975). The Measurement of crack growth resistance curves using the J-integral. International Journal of Fracture, 11, pp. 528-530.
61. Garwood, S.J. (1979). Effect of specimen geometry on crack growth resistance. In Elastic-Plastic Fracture Mechanics, ASTM STP 677, American Society for Testing and Materials, Philadelphia, pp. 511-532.
62. Green, A. E. & Zerna, W. (1954). Theoretical Elasticity. Oxford University Press, Oxford.
63. Gurson, A.L. (1977). Continuum theory of ductile rupture by void nucleation and growth: Part I-yield criteria and flow rules for porous ductile media. Journal of Engineering Materials and Technology, 99, pp. 2-15.
64. Hancock, J. W., Reuter, W. G. & Parks, D. M. (1992). Constraint and toughness parameterized by T. In Constraint Effects in Fracture, ASTM STP 1171, American Society for Testing and Materials, Philadelphia, pp. 21-40.
65. Heerens, J., Hellmann, D. & Zerbst, U. (1996). Probendicken-und Ligamenteinschniirung, zwei GraBen zur Erfassung der Constraintabhangigkeit von R-Kurven (in German). In Proceedings of 28. DVM-Conference on Fracture Processes (ed. W. Brocks), German Association for Materials Research and Testing (DVM), Berlin, pp. 389-400.
66. Hibbitt, H. D., Karlsson, B. I. & Sorenson, (1998), ABAQUS User Manual, Version 5.8, Hibbitt, Karlsson & Sorensen, Inc., Providence, R. I.
67. Hutchinson, J. W. (1968). Singular behaviour at the end of a tensile crack in a hardening material. Journal of the Mechanics and Physics of Solids, 16, pp. 13-31.
68. Hutchinson, J. W. & Suo, Z. (1991). Mixed mode cracking in layered materials. In Advances of Applied Mechanics, Academic Press, New York, 29, pp. 63-191.
69. Irwin, G. R. (1958). Fracture Handbuch der Physik, VI, pp. 551-589.
70. Kolednik, O. (1991). On the physical meaning of J-da-curves. Engineering Fracture Mechanics, 38, pp. 403-412.
71. Kolednik, O. & Turner, C.E. (1994). Application of energy dissipation rate arguments to ductile instability. Fatigue f3 Fracture of Engineering Materials and Structures, 17, pp. 1129-1145.
72. Kuang, Z.-B. & Xu, X.-P. (1987). Stress and strain fields at the tip of a sharp V-notch in a power-hardening cmaterial. International Journal of Fracture, 35, pp. 39-53.
73. Lam, P. S. & Freund, L. B. (1985). Journal of the Mechanics and Physics of Solids, 32, pp. 153-167.
74. Lance, G. & Nemat-Nasser, S. (1986). Slip-induced plastic flow of geomaterials and crystals. Mechanics of Materials, 5, pp. 1-11.
75. Landes, J. D., Walker, H. & Clarke, G. A. (1979). Evalution of estimation procedures used in J-integral testing. Elastic-Plastic Fractur, ASTM STP 668, American Society for Testing and Materials, Philadelphia, pp. 266-287.
76. Larsson and Carlsson (1973). Influence of non-singular stress terms and specimen geometry on small scale yielding at crack tips in elastic-plastic materials. Journal of the Mechanics and Physics of Solids, 21, pp. 17-26.
77. Larsson, L. H. (1984). EGF Numerical round robin on EPFM. In Proc. of 3rd International ConI Numerical Methods in Fracture Mechanics, pp.775-814.
78. Leevers, P. S. & Radon, J. C. (1982). Inherent stress biaxiality in various fracture specimen geometries. International Journal of Fracture, 19, pp. 311-325.
79. Leighton, J. T., Champion, C. R. and Freund, L. B. (1987). Journal of the Mechanics and Physics of Solids, 35, pp. 541-563.
80. Lemaitre, J. & Chaboche, J.-L. (1990). Mechanics of Solid Materials. Cambridge University Press, Cambridge, New York.
81. Li, Y. C. & Wang, T. C. (1986). High-order aiSymptotic field of tensile planestrain nonlinear crack problems. Sci entia Sinica (Series A), 29, pp. 941-955.
82. Li, F. Z. & Pan, J. (1990). Plane-strain crack-tip fields for pressure-sensitive dilatant materials. Transactions of ASME, Journal of Applied Mechanics, 57, pp. 40-49.
83. Li, F. Z. & Pan, J. (1990). Plane-stress crack-tip fields for pressure-sensitive dilatant materials. Engineering Fracture Mechanics, 35, pp. 1105-1116.
84. Liu, H. W. & Zhuang, T. (1985). A dual-parameter elastic-plastic fracture criterion. International Journal of Fracture, 27, pp. R87-R91.
85. Liu, C., Lambros, J. & Rosakis, A. (1993). Highly transient elastodynamic crack growth in a bimaterial interface: higher order asymptotic analysis and optical experiments. Journal of the Mechanics and Physics of Solids, 41, pp. 1887-1954.
86. McClintok, F. A. (1969). Plasticity aspects offracture. in Fracture: an Advances Treatise, Vol. III, ed. H. Liebowitz, Academic Press, New York, pp. 47-225.
87. McMeeking, R. M. (1977). Finite deformation analysis of crack tip opening in elastic-plastic materials and implications for fracture initiation. Journal of the Mechanics and Physics of Solids, 25, pp. 357-381.
88. McMeeking, R. M. & Parks, D. M. (1979). On criteria for J-dominance of crack tip fields in large-scale yielding. Elastic-Plastic Fracture Mechanics, ASTM STP 668, American Society for Testing and Materials, Philadelphia, pp. 175-194.
89. Merkle, J. G. & Corten, H. T. (1974). A J-integral analysis for the compact specimen, considering axial force as well as bending effects. Journal of Press Vessel Technology, 96, pp. 286-292.
90. Munz, D. & Yang, Y.-Y. (1993). Stresses in ceramic-metal joints under mechanical and thermal loading. In Mis-Matching of Wleds, editors K.-H. Schwalbe and M. Kocak, ESIS Publication 17, Mechanical Engineering Publications Limited, London, pp. 35-58.
91. Nakamura, T. & Parks, D. M. (1990). Three-dimensional crack front fields in a thin ductile plate. Journal of the Mechanics and Physics of Solids, 38, pp. 787-812.
92. Nemat-Nasser, S., Mehrabadi, M. M. & Iwakuma, T. (1981). On certain macroscopic and microscopic aspects of plastic flow of ductile materials. In ThreeDimensional Constitutive Relations and Ductile Fracture, S. Nemat-Nasser ed., North-Holland Publishing Co., pp. 157-172.
93. Nikishikov, G. P., Bruckner-Foit, A. & Munz, D. (1995). Calculation of the second fracture parameter for finite cracked bodies using a three-term elasticplastic asymptotic expansion. Engineering Fracture Mechanics, 52, pp. 685-701.
94. Obst, V. D. (1989). Versuche zur Schaffung einer Datenstruktur für die inelastische Berechnung von Kriechenvorgangen in thermisch belasteten Komponenten (in German). Technical Report, MPA-Auftrags-Nr. 8650 00 000, Staatliche Materialpriifungsanstalt, University of Stuttgart, April 1989.
95. O'Dowd, N. P. & Shih, C. F. (1991). Family of crack-tip fields characterized by a triaxiality parameter-I. Structure of fields. Journal of the Mechanics and Physics of Solids, 39, pp. 989-1015.
96. O'Dowd, N. P. & Shih, C. F. (1992). Family of crack-tip fields characterized by a triaxiality parameter-II. Fracture applications. Journal of the Mechanics and Physics of Solids, 40, pp. 939-963.
97. O'Dowd, N. P. & Shih, C. F. (1993). Two-parameter fracture mechanics theory and applications. Fracture Mechanics: 24th Volume, ASTM STP 1207 (J.D. Landes, D.E. McCabe and J.A.M. Boulet, eds.), American Society for Testing and Materials, Philadelphia, pp. 21-47.
98. O'Dowd, N. P. and Sumpter, J. D. G.(1996). Effect of thermomechanicalloading on near tip constraint. Journal de Physique IV, Colloque C6, 6, pp. C6-539-C6-548.
99. Ostlund, S. & Gudmundson, P. (1988). Asymptotic crack tip fields for dynamic fracture of linear strain-hardening solids. International Journal of Solids and Structures, 24, pp. 1141-1158.
100. Pan, J. (1990). Asymptotic analysis of a crack in a power-law material under combined in-plane and out-of-plane shear loading conditions. Journal of the Mechanics and Physics of Solids, 38, pp. 133-159.
101. Pan, J. & Shih, C. F. (1990) Elastic-plastic analysis of combined mode I and III crack-tip fields under small scale yielding conditions. Journal of the Mechanics and Physics of Solids, 38, pp. 161-181.
102. Parks, D. M. & Wang, Y.-Y. (1988). Elastic-plastic analysis of part-through surface cracks. in Analytical, Numerical and Experimental Aspects of Three Dimensional Fracture Processes, ASME, AMD-91, Eds. A. J. Rosakis et al., ASME New York, pp. 19-32.
103. Parks, D. M. (1991). Three-dimensional Aspects of HRR dominance. In Defect Assessmen in Components-Fundamentals and Applications J.G. Blauel and K.H. Schwalbe eds., ESIS/EGF 9, London: Mechanical Engineering Publications, pp. 205-231.
104. Parks, D. M. (1992). Advances in characterization of elastic-plastic crack-tip fields. In Topics of Fracture and Fatigue, A. S. Argon ed., Springer Verlag New York, pp. 59-98.
105. Ponte Castaneda, P. (1986). Asymptotic fields of a perfectly-plastic, planestress Model II growing crack. Journal of Applied Mechanics, 53, pp. 831-833.
106. Ponte Castaneda, P. (1987). Plastic stress intensity factors in steady crack growth. Journal of the Mechanics and Physics of Solids, 54, pp. 379-387.
107. Ponte Castaneda, P. (1987). Asymptotic analysis in steady crack growth with linear strain-hardening. Journal of the Mechanics and Physics of Solids, 35, pp. 227-268.
108. Ponte Castaneda, P. & Mataga, P. A. (1991). Stable crack growth along a brittle/ductile interface-I. Near-tip fields. International Journal of Solids and Structures, 27, pp. 105-133.
109. Rice, J. & Sih, G. C. (1965). Plane problems of cracks in dissimilar media. Transactions of ASME: Journal of Applied Mechanics, 32, pp. 418-423.
110. Rice, J. R. (1968). A path independent integral and the approximate analysis of strain concentration by notches and cracks. Transactions of ASME, Journal of Applied Mechanics, 35, pp. 379-386.
111. Rice I. R. & Rosengren, G. F. (1968). Plane strain deformation near a crack tip in a power-law hardening materiaL Jour'nal of the Mechanics and Physics of Solids, 16, pp. 1-12.
112. Rice,.I. R. (1974). Limitation of small scale yielding approximations for crack tip plasticity. Journal of the Mechanics and Physics of Solids, 22, pp. 17-26.
113. Rice,.I. R. (1977). Theor'etical and Apllied Mechnaics, edited by W. T. Koiter, North-Holland Publishing Co., pp. 207-220.
114. Rice,.I. (1988). Transactions of ASME: Journal of Applied Mechanics. 55, pp. 98-103.
115. Roos, E., Eisele, C., Silcher, H. & Kiessling, D. (1987). Ermittlung yon Ril3widerstandskurven auf der Basis des J-Integrals an Grol3proben (in German). In 13.\IPA-Seminar, Cniversitiit Stuttgart.
116. Rudnicki L. W. & Rice.I. R. (1975). Conditions for the localization of dpformation in pressure-sensitive dilatant materials. Journal of the Mechanics and Physics of Solids, 23, pp. 371-394.
117. Schimpfke, T. and Sievers,.I. (1997). Analysen zur bruchmechanischen Bewertung yon Thermoschock-Grol3yersuchen (in German). In Proceedings of 29. DVM-Conference on Fracture Processes (ed. W. Brocks), German Association for Materials Research and Testing (DVM), Berlin, pp. 59-69.
118. Schwalbe, K.-H. (1980). Bruchmechanik rnetallischer Wer'kstoffe (in German). Carl Hanser \"erlag, i\Iiinchen, \Vien.
119. Schwalbe, K.-H. & Hellmann, D. (1984). Correlation of stable crack growth with the. I-integral and the crack tip opening displacement, effects of geomptry. size and materiaL Technical Report GKSS 84/E/37, GKSS-Forschungszentrum Geesthacht.
120. Sham, T. L. (1983). A finite element study of the asymptotic near-tip fields for mode I plane strain cracks growing stably in elastic ideally plastic solids. Elastic-Plastic FmctuT(;: I" Inelastic Cmck Analysis, ASTM STP 803, American Society for Testing and '.\Iaterials, Philadelphia, pp. I 52-I 79.
121. Sham, T. L. (1991). Determination of the elastic T-terrn using higher order weight functions. International Journal of Fmctur'e, 48, pp. 81-102.
122. Sharma, S. M. & Arayas, N. (1991). Determination of higher-order terms in asymptotic plastoplastic crack tip solutions. Jom'nal of the Mechanics and Physics of Solids, 39, pp. 1043-1072.
123. Sharma, S. M. & Aravas, K. (1993). On the development of variable-separable asymptotic elastoplastic solutions for interface cracks. International Journal of Solids and Structur'es, 39, pp. 1043-1072.
124. Shih, C. F. (1974). Small-scale yielding analysis of mixed mode plane-strain crack problems. Fracture Analysis, ASTM STP 560, American Society for Testing and Materials, Philadelphia, pp. 187-210.
125. Shih, C. F. & German III D. (1981). Requirements for a one parameter characterization of crack tip fields by the HRR singularity. International Journal of Fmctur'e, 17, pp. 27-43.
126. Shih, C. F. & Asaro, R.I. (1988). Elastic-plastic analysis of cracks on birnaterial interfaces: Part I-Small scale yielding. Transactions of ASi\IE: Jour'nal of Applied Mechanics. 55, pp. 299-316.
127. Shih, C. F. & Asaro, R. J. (1989). Elastic-plastic analysis of cracks on bimaterial interfaces: Part II-Structure of small-scale yielding fields. Transactions of AS.\IE: Journal of Applied Mechanics, 56, pp. 763-779.
128. Shih. C. F. &: Asaro. R.I. (1990). Elastic-plastic and asymptotic fields of interface cracks. International Journal of Fracture, 42, pp. 101-116.
129. Shih, C. F., Asaro, R. J. & O'Dowd, N. P. (1991). Elastic-plastic analysis of cracks on bimaterial interfaces: Part III-Large scale yielding fields. Transactions of ASME: Journal of Applied Mechanics, 58, pp. 450-463.
130. Shih, C. F. (1991). Cracks on bimaterial interfaces: elasticity and plasticity aspects. Materials Science and Engineering, A 143, pp. 77-90.
131. Shih, C. F. & O'Dowd, N. P. (1993). A fracture mechanics approach based on a toughness locus. presented on International Conference Shallow Crack Fracture Mechanics, Toughness Tests and Applications, Cambridge, UK, Sept. 1992.
132. Shih, C. F., O'Dowd, N. P. & Kirk, M. T. (1993). A framework for quantifying crack tip constraint. In Constraint Effects in Fracture, ASTM STP 1171, American Society for Testing and Materials, Philadelphia, pp. 2-20.
133. Sievers, J., Schulz, H., Bass, B. R., Pugh, C. E. and Keeney, J. A. (1996). CSNI project for fracture analyses of large-scale international reference experiments, Phase II. Technical Report OCDE/GD(96)187. Organisation for Economic CoOperation and Development, Paris.
134. Sievers, J. (1997). RPV PTS ICAS: Reactor Pressure Vessel Pressurized Thermal Shock International Comparative Assessment Study. Organisation for Economic Co-Operation and Development, Paris (1997).
135. Slepyan, L. I. (1976). Crack dynamics in an elastic-plastic body. Izvestiya Akademii Nauk SSSR, Mekhanika Tverdogo Tela (English Translation), 11, pp. 144-153.
136. Sommer, A. & Aurich, D. (1991). On the effects of constraint on ductile fracture. In Defect Assessment in Components-Fundamentals and Applications, ESIS/EGF9, J.G. Blauel and K.-H. Schwalbe eds., London: Mechanical Engineering Publications, pp. 141-174.
137. Spitzig, W. A. & Richmond, O. (1979). Effect of hydrostatic pressure on the deformation behaviour of polyethylene and polycarbonate in tension and in compression. Polymer Engineering Science, 19, pp. 1129-1139.
138. Steenkamp, P. A. J. M. (1986). Investigation into the validity of J-based methods for the prediction of ductile tearing and fracture. PhD Thesis, Delft University of Technology.
139. Sue, H.-J. & Vee, A. F. (1989) Toughening mechanisms in a multi-phase alloy of nylon 6,6/polyphenylene oxide. Journal of Materials Science, 24, pp. 1447-1457.
140. Tippur, V. H. & Rosakis, A. J. (1990). Quasi-static and dynamic crack growth along bimaterial interface: a note on crack tip measurements using coherent gradient sensing. In SM Report 90-17, California Institute of Technology.
141. Tvergaard, V. (1982). On localization in ductile materials containing spherical voids. International Journal of Fracture. 18, pp. 237-252.
142. Tvergaard, V. & Needleman, A. (1984). Analysis of the cup-cone fracture in a round tensile bar. Acta Metallurgica. 32, pp. 152-169.
143. Wang, T. C. (1990). Elastic-plastic asymptotic fields for cracks on bimaterial interfaces. Engineering Fracture Mechanics, 37, pp. 527-538.
144. Wang, Y.-Y. (1992). On the two-parameter characterization of elastic-plastic crack-front fields in surface-cracked plates. In Constraint Effects in Fracture, ASTM STP 1171, American Society for Testing and Materials, Philadelphia, pp. 120-138.
145. Wei, Y. & Wang, T. (1995). Fracture criterion based on the higher-order asymptotic fields. International Journal of Fracture, 73, pp. 39-50.
146. Wells, A. A. (1961). Unstable crack propagation in metals: cleavage and fast fracture. In Proc. of Crack Propagation Symposium, Cranfield, 1, pp. 210-230.
147. Williams, M. L. (1952). Stress singularities resulting from various boundary conditions in angular corners of plates in extension. Transactions of ASME: Journal of Applied Mechanics, 19, pp. 526-528 (1952).
148. Williams, M. L. (1957). On the stress distribution at the base of a stationary crack. Transactions of ASME: Journal of Applied Mechanics, 24, pp. 111-114.
149. Williams, M. L. (1959). The stresses around a fault or crack in dissimilar media. Bulletin of Seismology Society of America, 49, pp. 199-204.
150. Willis, J. R. (1971). Fracture mechanics of interfacial cracks. Journal of Mechanics and Physics of Solids, 19, pp. 353-368.
151. Xia, L., Wang, T. C. & Shih, C. F. (1993). Higher-order analysis of crack-tip fields in elastic power-law hardening materials. Journal of the Mechanics and Physics of Solids, 41, pp. 665-687.
152. Yang, S., Chao, Y.J. & Sutton, N.A. (1993). Higher order asymptotic fields in a power law hardening material. Engineering Fracture Mechanics, 45, pp. I-20.
153. Yang, W., Suo, Z. & Shih, C.F.(1991). Mechanics of dynamic debonding. Proceeding of Royal Society London, Series A, 433, pp.679-697.
154. Yu, H. & Yang, W. (1994). Mechanics of transonic debonding of a bimaterial interface: The anti-plane shear case. Journal of the Mechanics and Physics of Solids, 42, pp. 1789-1802.
155. Yu, H. & Yang, W. (1995). Mechanics of transonic debonding of a bimaterial interface: The in-plane case. Journal of the Mechanics and Physics of Solids, 43, pp. 207-232.
156. Yuan, H. (1990). Untersuchung bruchmechanischer Parameter fur elastischplastisches RijJwachstum (in German). PhD. Thesis, Technical Universoty of Berlin. DVI-Technical Report, Series No. 18: Mechanics/Fracture Mechanics, No. 82, VDI-Verlag, Diisseldorff.
157. Yuan, H. & Brocks, W. (1991). Kotes on plastic reloading zone in asymptotic analysis of elastic-plastic crack extension. Archive of Appl?:ed Mechanics, 61, pp. 471-478.
158. Yuan, H. & Brocks, W. (1991). On the J-integral concept for elastic-plastic crack growth. Nuclear Engineering and Design, 131, pp. 157-173
159. Yuan, H., Cornec, A. & Schwalbe, K.-H. (1991). Finite-ElementGntersuchungen stabilen Rifiwachstums mittels Kohiisivzonenmodell unter Ebenendehnungszustand (in German). In Proceedings of 23. DVM-Conference on Fracture Processes (ed. D. Munz), German Association for Materials Research and Testing (DVM), Berlin.
160. Yuan, H. (1992). Near-tip field analysis of steady-state crack growth along a linear-hardening elastic-plastic interface. GKSS Technical Note GKSS/WW /92/6, March 1992, GKSS-Forschungszentrum Geesthacht.
161. Yuan, H. & Cornec, A. (1993). Asymptotic analysis of steady-state crack extension of combined mode I and III in elastic-plastic materials with linearhardening. Fracture Mechanics, ASTM STP 1189, American Society for Testing and Materials, Philadelphia, pp. 185-207.
162. Yuan, H. & Schwalbe, K.-H. (1993). An asymptotic analysis of static and dynamic crack extension along a ductile bimaterial interface-Anti-plane case. Fracture Mechanics, ASTM STP 1189, American Society for Testing and Materials, Philadelphia, pp. 208-226.
163. Yuan, H. & Lin, G. (1993). Elastoplastic crack analysis for pressure-sensitive dilatant materials-Part I: Higher-order solutions and two-parameter characterization. International Journal of Fracture, 61, pp. 295-330.
164. Yuan, H. (1994). Elastoplastic crack analysis for pressure-sensitive dilatant materials-Part II: Interface cracks. International Journal of Fracture, 69, pp. 167-187.
165. Yuan, H. & Lin, G. (1994). Analysis of elastoplastic sharp notches. Intemational loumal of Fmcture, 67, pp. 187-216.
166. Yuan, H. & Cornec, A. (1994). Analysis of steady-state interface crack growth. In Mis-Matching of Welds, ESIS 17 (Edited by K.-H. Schwalbe and M. Kocak), Mechanical Engineering Publications, London, pp. 141-159.
167. Yuan, H. (1994). A perturbation analysis of elastic-plastic dynamic crack-tip fields under combined mode I and:\10de III loading conditions. Acta Mechanica, 104, pp. 27-63.
168. Yuan, H. (1996). Singular stress fields at V-notch tips in elastoplastic pressuresensitive materials. Acta Mechanica, 118, pp. 151-170.
169. Yuan, H. (1995). Plane stress near-tip field analysis of steady-state crack growth along a linear-hardening elastic-plastic interface. Acta Mechanica, 109, pp. 207-226.
170. Yuan, H., Lin, G. & Cornec, A. (1995). Quantifications of crack constraint effects in an austenitic steels. Intemational loumal of Fmcture, 71, pp. 273-291.
171. Yuan, H., Lin, G. & Cornec, A (1996). Applications of cohesive zone model for assessment of ductile fracture processes. Transactions of ASME: loumal of Engineering Materials and Technology, 118, pp. 192-200.
172. Yuan, H. (1996). Charakterisierung eines biaxialbelasteten Risses unter dem ebenen Spannungszustand (in German). In Proceedings of 28. DVM-Conference on Fracture Processes (ed. W. Brocks), German Association for Materials Research and Testing (DVM), Berlin, pp. 211-223.
173. Yuan, H. (1997). Dynamic crack growth along elastoplastic bimaterial interface. Acta Mechanica, 121, pp. 51-77.
174. Yuan, H. & Brocks, W. (1997). Quantification of constraint effects in threedimensional crack front fields. loumal of the Mechanics and Physics of Solids, 46, pp. 219-241.
175. Yuan, H. & Kalkhof, D. (1999). Effects of temperature gradients on crack characterisation under thermal-mechanical loading conditions. Intemational lournal oj Fracture, 100, pp. 355-377.
176. Yuan, H. & Kalkhof, D. (1998). Assessments of cracks under pressurized thermal shock conditions. In Proceedings of 12th European Conference on Fracture, ed. by Miller. pp. 435-440.
177. Yuan, H., Niffenegger, M. & Kalkhof, D. (1998). Scaling of Thermal-induced material inhomogeneity for crack assessments. In Proceedings of 30. DVMConference on Fracture Processes (ed. W. Brocks), German Association for Materials Research and Testing (DVM), Berlin.
178. Yuan, H. & Kalkhof, D. (1998). Characterization of constraint effects based on micromechanical modelling. In Proceedings of 12th European Conference on Fmcture, ed. by Miller. pp. 781-786.
179. Yuan, H. & Chen, J. (2000). Analysis of size effects based on lower-order symmetric gradient plasticity model. Computational Materials Science, 19, pp. 143-157.
180. Yuan, H. & Chen, J. (2001). Identification of the intrinsic material length in gradient plasticity from micro-indentation tests. Intemational loumal oj Solids and Structures, 38, pp. 8171-8187.
181. Yuan, H. & Chen, J. (2001). The role of intrinsic material length scales in micro-indentation simulations using gradient plasticity models. Computational Materials Science, in print.
182. Yuan, H., Chen, J. & F.-H. Wittmann (2001). Investigation of size effects based on a nonlocal micromechanical damage model. Computational Materials Science. Submitted for publication.
183. Yuan, H. & Chen, J. (2002). Computational analysis of thin film debonding using cohesive model in the frame of gradient plasticity. Submitted for publication.
184. Zhang, C. Z. (1986). Die Anwendung von Integralgleichungsmethoden ZUT Lo. mng dynamischcT Riflprobleme (in German). PhD. Thesis, Technical University of Darmstadt. VDI-Techncial Report, Series No. 18, No. 28, VDI-Verlag, Diisseldorff.
185. Zywicz, E. & Parks, D. M. (1991). Joumal of the Mechanics and Physics of Solids, 40, pp. 511-536.