Decrypting third body flows to solve dry lubrication issue - MoS2 case study under ultrahigh vacuum

Wear

Volumn 305, Issue 1-2, 2013, Pages 192-204

  Colas, G ^a,b,c   Saulot, A ^a   Godeau, C ^a   Michel, Y ^b   Berthier, Y ^a  

^a UNIVERSITÉ DE LYON   (France)

^b CNES   (France)

^c THALES ALENIA SPACE   (France)

Author keywords

Dry lubrication; High vacuum; MoS2; Solid lubricant coatings; Third body

Indexed keywords

ENERGY DISPERSIVE X RAY SPECTROSCOPY; EXPERIMENTAL PROCEDURE; HIGH VACUUM; MOS2; PHYSICO-CHEMICAL MEASUREMENTS; SCANNING ELECTRON MICROSCOPE; SOLID LUBRICANT COATINGS; THIRD BODY;

COATINGS; CRYPTOGRAPHY; FRICTION; LUBRICATION; MASS SPECTROMETRY; SCANNING ELECTRON MICROSCOPY; SOLID LUBRICANTS; X RAY SPECTROSCOPY;

MOLYBDENUM COMPOUNDS;

EID: 84880015124     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2013.06.007     Document Type: Article

References (67)

1. ESA/ESTEC/TOS-QM Materials and Processes Division, SME Initiative Course - Materials.
2. M. Pfeiffer, J. Harder, U. Walter, Development of a compact KA-BAND antenna pointing mechanism for intersatellite links on small satellites, in: 13th European Space Mechanisms and Tribology Symposium - ESMATS 2009, Vienna, ESA SP-670, 2009.
3. I. Santos, G. Migliorero, High precision linear actuator development, in: 13th European Space Mechanisms and Tribology Symposium - ESMATS 2009, Vienna, ESA SP-670, 2009.
4. R.L. Fusaro, NASA/TM-104525, Tribology Needs for Future Space and Aeronautical Systems, 1991.
5. Ch. Martin, J. Sailleau, P. Pesenti, Expérimentation des composites autolubrifiants pour roulements spatiaux, in: CNES (Ed.), La Recherche Spatiale vol. 13, 1974, pp. 20-24.
6. P.D. Fleischauer, R. Bauer, The Effect of Chemistry and Crystal Microstructure on the Lubrication Properties of Sputtered MoS2 Films, AD-A197460; TR-0086A(2945-03)-3; SD-TR-88-36; F04701-85-C-0086, 1988.
7. J.L. Grosseau-Poussard, Correlations Entre Propriétés Tribologiques et Microstructures de Déformation, PhD Thesis No. 1995POIT2267, 1995.
8. 2. Wear 2000, 237:1-11.
9. x films by ion beam mixing. Applied Physics Letter 1986, 49(9):496-498.
10. x films amorphized by ion bombardment. Applied Physics Letter 1988, 52(14):1130-1132.
11. Kohen I., Play D., Godet M. Effect of machine rigidity or degrees of freedom on the load-carrying capacity of wear debris. Wear 1980, 61:381-384.
12. Y. Berthier, Tribologie - Science Carrefour, Journée Européenne du Freinage J.E.F. 92, Lille, 1992.
13. J.W. Kannel, K.F. Dufrane, Rolling element bearings in space, in: 20th Aerospace Mechanisms Symposium, NASA CP-2423, 1986, pp. 121-132.
14. Perry S.S., Tysoe W.T. Frontiers of fundamental tribological research. Tribology Letters 2005, 19(3):151-161.
15. J.-C. Rivoal, C. Frétigny, Microscopie à Force Atomique (AFM), Techniques de l'Ingénieur, R 1 394, 2005.
16. Didziulis S.V., Fleischauer P.D. Applications of surface science to solid lubricants. Surface Diagnostics in Tribology-Fundamental Principles and Applications, Series in Modern Tribology 1993, vol. 1:135-182. World Scientific Publishing Co. Pte. Ltd., Singapore.
17. Achanta S., Liskiewicz T., Drees D., Celis J.P. Friction mechanisms at the micro-scale. Tribology International 2009, 42:1792-1799.
18. Liu Y., Gubisch M., Haensel T., Spiess L., Schaefer J.A. Evaluation of the friction of WC/DLC solid lubricating films in vacuum. Tribology International 2006, 39:1584-1590.
19. Patton S.T., Eapen K.C., Zabinski J.S. Effects of adsorbed water and sample aging in air on the μN level adhesion force between Si(100) and silicon nitride. Tribology International 2001, 34:481-491.
20. 1.6 coating. Wear 2002, 252:546-556.
21. Sliney H.E. Dynamics of solid lubrication as observed by optical microscopy. ASLE Transactions 1978, 21:109-117.
22. D. Play, M. Godet, Visualization of chalk wear, 3rd Leeds-Lyon Symposium: The wear of non-metallic materials, 7-9 September 1976, Institution of Mechanical Engineers, Leeds, 1977, pp. 221-229.
23. Wahl Kathryn J., Chromik Richard R., Lee Gun Young Quantitative in situ measurement of transfer film thickness by Newton's rings method. Wear 2008, 264:731-736.
24. Scharf T.W., Singer I.L. Quantification of the thickness of carbon transfer films using Raman tribometry. Tribology Letters 2002, 14(2):137-145.
25. 2 coating. Wear 2012, 274-275:149-161.
26. I.L. Singer, S.D. Dvorak, K.J. Wahl, T.W. Scharf, Third body processes and friction of solid lubricants studied by in situ optical and Raman tribometry, in: D. Dowson et al. (Ed.), Boundary and Mixed Lubrication: Science and Application, in: Proceedings of the 28th Leeds-Lyon Symposium on Tribology, Elsevier, pp. 327-336, 2002.
27. Dvorak S.D., Wahl K.J., Singer I.L. In situ analysis of third body contributions to sliding friction of a Pb-Mo-S coating in dry and humid air. Tribology Letters 2007, 28:263-274.
28. Krick B.A., Vail J.R., Persson Bo N.J., Sawyer W.G. Optical in situ micro-tribometer for analysis of real contact area for contact mechanics, adhesion, and sliding experiments. Tribology Letters 2012, 45:185-194.
29. Jullien A., Meurisse M.H., Berthier Y. Determination of tribological history and wear through visualisation in lubricated contacts using a carbon-based composite. Wear 1996, 194:116-125.
30. 2 in a reciprocating sliding contact. Wear 1998, 214:212-220.
31. N. Mauntler, T. Schmitz, M. Hamilton, J. Steffens, N. Angibay, J. Bares, W.G. Sawyer, Tribometers for in situ Profilometry. Presentation to STLE 2007, Philadelphia.
32. S. Fayeulle, P.D. Ehni, I.L. Singer, Role of transfer films in wear of MoS2 coatings. Mechanics of Coatings, Leeds-Lyon 16, Tribology Series 17, Elsevier Science Publishers BV, 1990, pp. 129-138.
33. Berthier Y. Third-body reality-consequences and use of the third-body concept to solve friction and wear problems. Wear-Materials, Mechanisms and Practice 2005, 291-316. John Wiley & Sons Ltd., Chichester, England. G. Stachowiak (Ed.).
34. Berthier Y. Experimental evidence for friction and wear modelling. Wear 1990, 139:77-92.
35. Godet M. The third-body approach: a mechanical view of wear. Wear 1984, 100:437-452.
36. J.R. Jones, NASA/SP-8063, Lubrication, Friction and Wear, 1971.
37. Heimberg J.A., Wahl K.J., Singer I.L., Erdemir A. Superlow friction behavior of diamond-like carbon coatings: time and speed effects. Applied Physics Letters 2001, 78(17):2449-2451.
38. Dickrell P.L., Sawyer W.G., Heimberg J.A., Singer I.L., Wahl K.J., Erdemir A. A gas-surface interaction model for spatial and time-dependent friction coefficient in reciprocating contacts: applications to near-frictionless carbon. Tribology Transactions 2005, 127:82-88.
39. Wilkens W., Kranz O. The formation of gases due to the sliding friction of teflon on steel in ultrahigh vacuum. Wear 1970, 15:215-227.
40. Nevchoupa R.A., de Segovia J.L., Deulin E.A. An UHV system to study gassing and outgassing of metals under friction. Vacuum 1999, 52:73-81.
41. Nevshupa R.A., de Segovia J.L., Deulin E. Outgassing of stainless steel during sliding friction in ultra-high vacuum. Vacuum 1999, 53:295-298.
42. Nevshupa R.A., de Segovia J.L. Outgassing from stainless steel under impact in UHV. Vacuum 2002, 64:425-430.
43. Kragelsky I.V., Alisin V.V. Tribology - Lubrication, Friction, and Wear, Tribological in Practice Series 2001, Professional Engineering Publishing Limited. M.J. Neale, T.A. Polak, C.M. Taylor (Eds.).
44. G. Theilier, T. Gradt, MoS2-Filled PEEK Composite as a self-lubricating material for aerospace applications, in: Proceedings of the 40th Aerospace Mechanisms Symposium, NASA Kennedy Space Center, May 12-14, 2010, NASA/CP-2010-216272.
45. 2 production during carbon/carbon composite friction. Wear 2007, 263:1220-1229.
46. Gouider M., et al. Mass spectrometry during C/C composite friction: carbon oxidation associated with high friction coefficient and high wear rate. Wear 2004, 256:1082-1087.
47. Bell M.E., Findlay J.H. Molybdenite as a new lubricant. Physical Review 1941, 59(11):922.
48. Winer W.O. Molybdenum disulfide as a lubricant: a review of the fundamental knowledge. Wear 1967, 10:422-452.
49. Fusaro R.L. Lubrication and failure mechanisms of molybdenum disulfide films I - effect of atmosphere. NASA TP 1978, 1343.
50. Fusaro RL Lubrication and failure mechanisms of molybdenum disulfide films II - effect of substrate roughness. NASA TP 1978, 1379.
51. Spalvins T. Lubrication with sputtered MoS2 films: principles, operation, limitations. NASA TM 1991, 105292.
52. 2 coating. Tribology Letters 1995, 1:59-66.
53. P.D. Fleischauer, M.R. Hilton, R. Bauer, Effects of Microstructure and Adhesion on Performance of Sputter-Deposited MoS2 Solid Lubricant Coatings, AD-A220900; TOR-0090(5064)-2 F04701-88-C-0089, 1990.
54. Dickinson R.G., Pauling L. The crystal structure of molybdenite. Journal of the American Chemical Society 1923, 45:1466-1471.
55. R.F. Deacon, J.F. Goodman, Orientation and frictional behaviour of lamellar solids on metals, in: Proceedings of the Conference on Lubrication Wear, London. Paper no. 17, 1957, pp. 344-347.
56. Deacon R.F., Goodman J.F. Lubrication by lamellar solids. Proceedings of the Royal Society of London 1958, 243(A):464-482.
57. K.J. Wahl, I.L. Singer, Role of 3rd body in life enhancement of MoS2, in: D. Dowson et al. (Ed.), The Third Body Concept: Interpretation of Tribological Phenomena, in: Proceedings of the 22nd Leeds-Lyon Symposium on Tribology, Elsevier, pp 407-413, 1996.
58. Wahl K.J., Dunn D.N., Singer I.L. Wear behaviour of Pb-Mo-S solid lubricating coatings. Wear 1999, 230:175-183.
59. W.B. Price, A Surface Chemical Examination of Sputter-Deposited MoS2 Films ESA-ESTL-TR-0083, 1989.
60. 2 thin films. ASLE Transactions 1984, 27(1):82-88.
61. D.G. Teer, et al., Molybdenum Sulphur Coatings, United States Patent 6,423,419 B1, 2001.
62. P. Lepesant, C. Boher, Y. Berthier, F. Rézai-Aria, A phenomenological model of the third body particles circulation in a high temperature contact, Wear, http://dx.doi.org/10.1016/j.wear.2012.08.019.
63. M. Godet, D. Play, Third-Body Formation and Elimination on Carbon-Fibre/Epoxy Composite, in: 1st European Space Tribology Symposium, ESA SP-111, 1975.
64. Dayot C., Saulot A., Godeau C., Berthier Y. Tribological behaviour of Pearlitic and Bainitic steel grades under various sliding conditions. Tribology International 2012, 46(1):128-136.
65. Trunfio-Sfarghiu A.M., Berthier Y., Meurisse M.H., Rieu J.P. Multiscale analysis of the tribological role of the molecular assemblies of synovial fluid. Case of a healthy joint and implants. Tribology International 2007, 40:1500-1515.
66. 2 solid lubricant films over a wide contact stress range. Tribology Letter 2004, 17(3):419-428.
67. M.R. Hilton, R. Bauer, P.D. Fleischauer, Tribological performance and deformation of sputtered-deposited MoS2 solid lubricant films during sliding wear and indentation contact. AD-A231 003; TR-0089(4945-03)-4, 1990.