High temperature physical and mechanical properties of large-scale Ti2AlC bulk synthesized by self-propagating high temperature combustion synthesis with pseudo hot isostatic pressing

Journal of the European Ceramic Society

Volumn 33, Issue 13-14, 2013, Pages 2435-2445

  Bai, Yuelei ^a   He, Xiaodong ^a   Wang, Rongguo ^a   Sun, Yue ^a   Zhu, Chuncheng ^b   Wang, Shuai ^a   Chen, Guiqing ^a  

^a HARBIN INSTITUTE OF TECHNOLOGY   (China)

^b HARBIN NORMAL UNIVERSITY   (China)

Author keywords

Electrical resistivity; High temperature mechanical properties; MAX phases; Quasi brittle fracture; Thermal properties

Indexed keywords

BRITTLE-PLASTIC TRANSITION; HIGH-TEMPERATURE COMBUSTION; HIGH-TEMPERATURE MECHANICAL PROPERTIES; MAX PHASIS; PHONON THERMAL CONDUCTIVITY; PHYSICAL AND MECHANICAL PROPERTIES; PSEUDO HOT ISOSTATIC PRESSINGS; QUASI-BRITTLE FRACTURE;

BRITTLE FRACTURE; COMBUSTION SYNTHESIS; COMPRESSIVE STRENGTH; ELECTRIC CONDUCTIVITY; HOT ISOSTATIC PRESSING; MECHANICAL PROPERTIES; TEMPERATURE; THERMODYNAMIC PROPERTIES;

THERMAL CONDUCTIVITY;

EID: 84879842833     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2013.04.014     Document Type: Article

References (74)

1. N phases. A new class of solids: thermodynamically stable nanolaminates. Prog Solid State Chem 2000, 28:201-281.
2. 2AlC in the 300-1573K temperature range. Acta Mater 2006, 54:2757-2767.
3. 2AlC. Metall Mater Trans A Phys Metall Mater Sci 2002, 33:2775-2779.
4. 2AlC. Z Metallk 2002, 93:66-71.
5. 2AlC in air. Oxid Met 2003, 59:303-320.
6. Sundberg M., Malmqvist G., Magnusson A., El-Raghy T. Alumina forming high temperature silicides and carbides. Ceram Int 2004, 30:1899-1904.
7. 2 composites at 550-950°C in air. J Alloy Compd 2010, 491:386-390.
8. 2 at 1000-1300°C in air. Corros Sci 2011, 53:290-295.
9. 2 at 550°C and 650°C by preoxidation at 1100°C. Int J Appl Ceram Technol 2010, 7:760-765.
10. Barsoum M.W., Radovic M. Elastic and mechanical properties of the MAX phases. Ann Rev Mater Res 2011, 41:195-227.
11. Gupta S., Barsoum M.W. On the tribology of the MAX phases and their composites during dry sliding: a review. Wear 2011, 271:1878-1894.
12. 3. Metall Mater Trans A Phys Metall Mater Sci 2000, 31:333-337.
13. n phases and their properties. Ceramics science and technology 2010, vol. 2:299-348. Wiley-VCH Verlag GmbH & Co., Weinheim, Germany.
14. Holm B., Ahuja R., Li S., Johansson B. Theory of the ternary layered system Ti-Al-N. J Appl Phys 2002, 91:9874-9877.
15. 2 phases (M=transition metal): a first-principle study. Comput Mater Sci 2010, 49:691-698.
16. 3: a first-principles study. Acta Mater 2011, 59:5523-5533.
17. 2 phases (A=Si, Ge, and Sn): a first-principle study. Solid State Sci 2010, 12:1220-1225.
18. 2CdC. Solid State Sci 2010, 12:144-147.
19. 2InC. Solid State Commun 2009, 149:564-566.
20. 3. Solid State Commun 2009, 149:2156-2159.
21. 2AlN. J Appl Phys 2008, 104:073713.
22. 0.5) solid solutions. J Mater Res 2008, 23:1517-1521.
23. 2. Metall Mater Trans A Phys Metall Mater Sci 1999, 30:1727-1738.
24. 2. Acta Mater 2005, 53:4359-4366.
25. Barsoum M.W., Brodkin D., El-Raghy T. Layered machinable ceramics for high temperature applications. Scr Mater 1997, 36:535-541.
26. 2. J Am Ceram Soc 1998, 81:1677-1681.
27. 2 to 1GPa. Nat Mater 2003, 2:107-111.
28. 2. Acta Mater 2006, 54:5261-5270.
29. 0.5). J Alloy Compd 2010, 498:62-70.
30. 2AlC. Acta Mater 2006, 54:1631-1639.
31. Finkel P., Zhou A.G., Basu S., Yeheskel O., Barsoum M.W. Direct observation of nonlinear acoustoelastic hysteresis in kinking nonlinear elastic solids. Appl Phys Lett 2009, 94:241904.
32. Barsoum M.W., Murugaiah A., Kalidindi S.R., Zhen T. Kinking nonlinear elastic solids, nanoindentations, and geology. Phys Rev Lett 2004, 92:4.
33. Barsoum M.W., Zhen T., Zhou A., Basu S., Kalidindi S.R. Microscale modeling of kinking nonlinear elastic solids. Phys Rev B 2005, 71:134101.
34. 0.5. Metall Mater Trans A Phys Metall Mater Sci 2000, 31:1857-1865.
35. 2: II. Effect of grain size and deformation temperature. J Am Ceram Soc 1999, 82:2855-2860.
36. 2. J Am Ceram Soc 2000, 83:825-832.
37. 3. J Am Ceram Soc 2008, 91:2258-2263.
38. 2AlC at 25-1000°C. Mater Lett 2009, 63:670-672.
39. 2 at ambient and elevated temperatures. Acta Mater 2001, 49:937-945.
40. 2 in the 1000-1200°C temperature range. Acta Mater 2001, 49:4103-4112.
41. 2 in the 25-1300°C temperature range. Acta Mater 2000, 48:453-459.
42. 2AlC synthesized by self-propagating high-temperature combustion synthesis with pseudo hot isostatic pressing. J Am Ceram Soc 2012, 95:358-364.
43. 2 ceramics at elevated temperatures. J Am Ceram Soc 2001, 84:2914-2920.
44. Bai YL, Zhang HX, He XD, Zhu CC, Wang RG, Sun Y, et al. Fabrication and microstructures of large-scale nonstoichiometric Ti2AlC bulk synthesized by self-propagating high temperature combustion synthesis with pseudo hot isostatic pressing. Submitted for publication.
45. 2AlC by self-propagating high temperature combustion synthesis with a pseudo-hot isostatic pressing process. J Mater Res 2009, 24:2528-2535.
46. 2AlC ceramic synthesized by an in situ reaction/hot pressing method. J Eur Ceram Soc 2008, 28:1679-1685.
47. 2 prepared by the solid-liquid reaction synthesis and simultaneous in-situ hot pressing process. Acta Mater 2002, 50:3141-3149.
48. 2. J Phys Chem Solids 1999, 60:429-439.
49. 2BX. J Mater Synth Process 1997, 5:197-216.
50. 2AlC. Scr Mater 2006, 54:841-846.
51. 3. Phys Rev B 2003, 67:235108.
52. 2SC. J Appl Phys 2008, 104:033502.
53. Taylor R.E. Thermal conductivity of titanium carbide at high temperatures. J Am Ceram Soc 1961, 44:525-625.
54. Lengauer W., Binder S., Aigner K., Ettmayer P., Guillou A., Debuigne J., et al. Solid state properties of group IVb carbonitrides. J Alloy Compd 1995, 217:137-147.
55. 3. J Appl Phys 2000, 87:8407-8414.
56. 2AlC. J Am Ceram Soc 2008, 91:4029-4035.
57. 2AlC. J Am Ceram Soc 2009, 92:2396-2399.
58. 2AlC ceramic. Mater Sci Eng A Struct Mater Prop Microstruct Process 2011, 528:2635-2640.
59. 2AlC ceramics. J Eur Ceram Soc 2011, 31:217-224.
60. Wan D.T., Meng F.L., Zhou Y.C., Bao Y.W., Chen J.X. Effect of grain size, notch width, and testing temperature on the fracture toughness of Ti3Si(Al)C-2 and Ti3AlC2 using the chevron-notched beam (CNB) method. J Eur Ceram Soc 2008, 28:663-669.
61. 2. Acta Mater 2005, 53:4163-4171.
62. 2 in tension. Acta Mater 2002, 50:1297-1306.
63. 2 (x=0.5, 0.75) solid solutions. J Alloy Compd 2004, 376:287-295.
64. 2AlC under compression. Mater Res Innov 2001, 5:87-93.
65. 2AlC. J Mater Sci 2009, 44:102-107.
66. 2 prepared by the solid-liquid reaction synthesis and simultaneous in-situ hot pressing process. Acta Mater 2002, 50:3141-3149.
67. 3 ceramic prepared by an in situ reaction synthesis/hot-pressing method. J Am Ceram Soc 2007, 90:2542-2548.
68. Ashby M.F., Embury J.D. The influence of dislocation density on the ductile-brittle transition in BCC metals. Scr Metall 1985, 19:557-562.
69. Faulkner R.G., Riddle N. Control of ductile to brittle transition temperature in ferritic pressure vessel steel. Mater Sci Technol 2011, 27:300-304.
70. 2. J Am Ceram Soc 1996, 79:1953-1956.
71. de Portu G., Micele L., Guicclardi S., Fujimura S., Pezzotti G., Sekiguchi Y. Effect of residual stresses on the fracture behaviour of notched laminated composites loaded in flexural geometry. Compos Sci Technol 2005, 65:1501-1506.
72. 2/TiC composites by SHS/PHIP. Mater Sci Eng A Struct Mater Prop Microstruct Process 2010, 527:4554-4559.
73. 2 prepared by reactive HIP. J Mater Sci 1999, 34:4385-4392.
74. 2 sintered by hot-pressing. Rare Metal Mater Eng 2005, 34:684-687.