Exploration of the complementary properties of biobased epoxies derived from rosin diacid and dimer fatty acid for balanced performance

Industrial Crops and Products

Volumn 49, Issue , 2013, Pages 497-506

  Huang, Kun ^a,b,c,d,e   Zhang, Jinwen ^e   Li, Mei ^a,b,c,d   Xia, Jianling ^a,b,c,d   Zhou, Yonghong ^a,b,c,d  

^a RESEARCH INSTITUTE OF FORESTRY   (China)

^b National Engineering Laboratory for Biomass Chemical Utilization   (China)

^c SFA   (China)

^d Key Lab of Biomass Energy and Material   (China)

^e Washington State University   (United States)

Author keywords

Biobased epoxy; Dimer acid; Rosin

Indexed keywords

BIOBASED EPOXY; COMPLEMENTARY PROPERTY; DIMER ACIDS; DYNAMIC MECHANICAL ANALYSIS (DMA); DYNAMIC MECHANICAL PROPERTY; NADIC METHYL ANHYDRIDE; ROSIN; THREE-POINT BENDING TEST;

DIFFERENTIAL SCANNING CALORIMETRY; ESTERIFICATION; ESTERS; FATTY ACIDS; MECHANICAL PROPERTIES; RESINS; THERMOGRAVIMETRIC ANALYSIS;

CURING;

ESTER; FATTY ACID; MECHANICAL PROPERTY; OXIDE; PERFORMANCE ASSESSMENT; RESIN;

EID: 84879743445     PISSN: 09266690     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.indcrop.2013.05.024     Document Type: Article

References (39)

1. Altuna F.I., Espósito L.H., Ruseckaite R.A., Stefani P.M. Thermal and mechanical properties of anhydride-cured epoxy resins with different contents of biobased epoxidized soybean oil. J. Appl. Polym. Sci. 2011, 120:789-798.
2. Aouf C., Guerneve C.L., Caillol S., Fulcrand H. Study of the o-glycidylation of natural phenolic compounds. The relationship between the phenolic structure and the reaction mechanism. Tetrahedron 2013, 69:1345-1353.
3. Aouf C., Nouailhas H., Fache M., Caillol S., Boutevin B., Fulcrand H. Multi-functionalization of gallic acid. Synthesis of a novel bio-based epoxy resin. Eur. Polym. J. 2013, 10.1016/j.eurpolymj.2012.11.025.
4. Aserin A., Garti N., Sasson Y. Preparation of monoglycerides of fatty acids from epichlorohydrin by phase-transfer catalysis. Glycidyl esters. Ind. Eng. Chem. Prod. Res. Dev. 1984, 23:452-454.
5. Asif A., Shi W., Shen X., Nie K. Physical and thermal properties of UV curable waterborne polyurethane dispersions incorporating hyperbranched aliphatic polyester of varying generation number. Polymer 2005, 46:11066-11078.
6. Besset C., Pascault J.P., Fleury E., Drockenmuller E., Bernard J. Structure-properties relationship of biosourced stereocontrolled polytriazoles from click chemistry step growth polymerization of diazide and dialkyne dianhydrohexitols. Biomacromolecules 2010, 11:2797-2803.
7. Boey F.Y.C., Qiang W. Experimental modeling of the cure kinetics of an epoxy-hexaanhydro-4-methylphthalicanhydride (MHHPA) system. Polymer 2000, 41:2081-2094.
8. Boquillon N., Fringant C. Polymer networks derived from curing of epoxidized linseed oil: influence of different catalysts and anhydride hardeners. Polymer 2000, 41:8603-8613.
9. Chiou B., Schoen P.E. Effects of crosslinking on thermal and mechanical properties of polyurethanes. J. Appl. Polym. Sci. 2002, 83:212-223.
10. Chrysanthos M., Galy J., Pascault J.P. Preparation and properties of bio-based epoxy networks derived from isosorbide diglycidyl ether. Polymer 2011, 52:3611-3620.
11. Czub P. Application of modified natural oils as reactive diluents for epoxy resins. Macromol. Symp. 2006, 242:60-64.
12. Deng Y., Martin G.C. Diffusion and diffusion-controlled kinetics during epoxy-amine cure. Macromolecules 1994, 27:5147-5153.
13. Gerbase A.E., Petzhold C.L., Costa A.P.O. Dynamic mechanical and thermal behavior of epoxy resins based on soybean oil. J. Am. Oil. Chem. Soc. 2002, 79:797-802.
14. Halbrook N.J., Lawrence R.V. Preparation of acrylic modified rosin. Ind. Eng. Chem. Prod. Res. Dev. 1972, 11:200-202.
15. Jakab E., Till F., Szkkely T. Thermal decomposition of aryl-alicyclic polyimides studied by thermogravimetry/mass spectrometry and pyrolysis-gas chromatography/mass spectrometry. J. Anal. Appl. Pyrolysis 1992, 23:229-243.
16. Kester E.B., Gaiser C.J., Lazar M.E. Glycidyl esters of aliphatic acids. J. Org. Chem. 1943, 8:550-556.
17. Leonard E.C. Polymerization-dimer acids. J. Am. Oil. Chem. Soc. 1979, 56:782-785.
18. Liu F., Wang Z., Wang Y., Zhang B. Copolymer networks from carboxyl-containing polyaryletherketone and diglycidyl ether of bisphenol-A: Preparation and properties. J. Polym. Sci. Pol. Phys. 2010, 48:2424-2431.
19. Liu X., Xin W., Zhang J. Rosin-based acid anhydrides as alternatives to petrochemical curing agents. Green Chem. 2009, 11:1018-1025.
20. Maerker G., Saggese E.J., Port W.S. Glycidyl esters. II. Synthesis of esters of commercial and pure fatty acids. J. Am. Oil Chem. Soc. 1961, 38:194-197.
21. Mcmahon D.H., Crowell E.P. Characterization of products from clay catalyzed polymerization of tall oil fatty acids. J. Am. Oil Chem. Soc. 1974, 51:522-527.
22. Miyagawa H., Mohanty A.K., Misra M., Drzal L.T. Thermo-physical and impact properties of epoxy containing epoxidized linseed oil. 2. Macromol. Mater. Eng. 2004, 289:636-641.
23. Miyagawa H., Misra M., Drzal L.T. Fracture toughness and impact strength of anhydride-cured biobased epoxy. Polym. Eng. Sci. 2005, 45:487-495.
24. Nouailhas H., Aouf C., Guerneve C.L., Caillol S., Boutevin B., Fulcrand H. Synthesis and properties of biobased epoxy resins. Part 1. Glycidylation of flavonoids by epichlorohydrin. J. Polym. Sci. Part A: Polym. Chem. 2011, 49:2261-2270.
25. Ozawa T.J. Kinetics analysis of derivatives curves in thermal analysis. Therm. Anal. 1970, 2:301-324.
26. Paschke R.F., Peterson L.E., Harrison S.A., Wheeler D.H. Dimer acid structures, the dehydro-dimer from methyl oleate and di-t-butyl peroxide. J. Am. Oil Chem. Soc. 1964, 41:56-60.
27. Pchelka B.K., Loupy A., Petit A. Improvement and simplification of synthesis of 3-aryloxy-1,2-epoxypropanes using solvent-free conditions and microwave irradiations. Relation with medium effects and reaction mechanism. Tetrahedron 2006, 62:10968-10979.
28. Samper M.D., Fombuena V., Boronat T., Garcia-Sanoguera D., Balart R. Thermal and mechanical characterization of epoxy resins (elo and eso) cured with anhydrides. J. Am. Oil Chem. Soc. 2012, 89:1521-1528.
29. Shabeer A., Garg A., Sundararaman S., Chandrashekhara K., Flanigan V., Kapila S. Dynamic mechanical characterization of a soy based epoxy resin system. J. Appl. Polym. Sci. 2005, 98:1772-1780.
30. Sourour S., Kamal M.R. Differential scanning calorimetry of epoxy cure: isothermal cure kinetics. Thermochim. Acta 1976, 14:41-59.
31. Stemmelen M., Pessel F., Lapinte V., Caillol S., Habas J.P., Robin J.J. A fully biobased epoxy resin from vegetable oils: from the synthesis of the precursors by thiol-ene reaction to the study of the final material. J. Polym. Sci. Part A: Polym. Chem. 2011, 49:2434-2444.
32. Tan S.G., Chow W.S. Curing characteristics and thermal properties of epoxidized soybean oil based thermosetting resin. J. Am. Oil. Chem. Soc. 2011, 88:915-923.
33. Vyazovkin S., Wight C.A. Kinetics in solids. Annu. Rev. Phys. Chem. 1997, 48:125-149.
34. Wang H., Liu B., Liu X., Zhang J., Xian M. Synthesis of biobased epoxy and curing agents using rosin and the study of cure reactions. Green Chem. 2008, 10:1190-1196.
35. Wheeler D.H., Milun A., Linn F. Dimer acid structures: cyclic structures of clay catalyzed dimers of normal linoleic acid 9-o 12-ch-octadecadienoic acid. J. Am. Oil. Chem. Soc. 1970, 47:242-244.
36. Yao K., Wang J., Zhang W., Lee J.S., Wang C., Chu F., He X., Tang C. Degradable rosin ester-caprolactone graft copolymers. Biomacromolecules 2011, 12:2171-2177.
37. Zhao J., Olesik S.V. Separation of dimer acids using enhanced-fluidity liquid chromatography. Anal. Chim. Acta 2001, 449:221-236.
38. Zheng Y., Yao K., Lee J.S., Chandler D., Wang J., Wang C., Chu F., Tang C. Well-defined renewable polymers derived from gum rosin. Macromolecules 2010, 43:5922-5924.
39. Zvetkov V.L. Comparative DSC kinetics of the reaction of DGEBA with aromatic diamines. II. Isothermal kinetic study of the reaction of DGEBA with m-phenylene diamine. Polymer 2001, 42:6687.