Detorque evaluation of dental abutment screws after immersion in a fluoridated artificial saliva solution

Journal of Prosthodontics

Volumn 22, Issue 4, 2013, Pages 275-281

  Duarte, Antônio R C ^a   Neto, João P Silva ^b   Souza, Júlio C M ^c,d   Bonachela, Wellington C ^e  

^a FEDERAL UNIVERSITY OF RIO GRANDE DO NORTE   (Brazil)

^b UNIVERSITY OF CAMPINAS   (Brazil)

^c UNIVERSIDADE FERNANDO PESSOA   (Portugal)

^d UNIVERSITY OF MINHO   (Portugal)

^e UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

Corrosion; Dental abutments; Dental implants; Screw loosening; Torque

Indexed keywords

ANTICARIES AGENT; DENTAL ALLOY; FLUORIDE; SALIVA SUBSTITUTE; TITANIUM; TITANIUM ALLOY (TIAL6V4);

ARTICLE; CHEMISTRY; CORROSION; DENTAL ABUTMENT; DENTAL SURGERY; IMMERSION; MATERIALS TESTING; SCANNING ELECTRON MICROSCOPY; SPECTROMETRY; SURFACE PROPERTY; TIME; TORQUE;

CARIOSTATIC AGENTS; CORROSION; DENTAL ABUTMENTS; DENTAL ALLOYS; DENTAL IMPLANT-ABUTMENT DESIGN; DENTAL RESTORATION FAILURE; FLUORIDES; IMMERSION; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; SALIVA, ARTIFICIAL; SPECTROMETRY, X-RAY EMISSION; SURFACE PROPERTIES; TIME FACTORS; TITANIUM; TORQUE;

EID: 84879692865     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2012.00941.x     Document Type: Article

References (57)

1. Niinomi M: Recent research and development in titanium alloys for biomedical applications and healthcare goods. Sci Techn Adv Mater 2003;4:445-454
2. Misch CE: Dental Implant Prosthetics. St. Louis, Mosby Inc., 2005
3. Wang RR, Fenton A: Titanium for prosthodontic applications: a review of the literature. Quintessence Int 1996;27:401-408
4. Ohkubo C, Hanatani S, Hosol T: Present status of titanium removable dentures-a review of the literature. J Oral Rehabil 2008;35:706-714
5. Anusavice KJ: Phillips Materiais Dentários (ed 11). Rio de Janeiro, Guanabara Koogan 2005.
6. Niinomi M: Mechanical properties of biomedical titanium alloys. Mater Sci Eng A 1998;243:231-236
7. Davis JR: Metals Handbook (ed 2). Dayton, OH, ASTM, 2003
8. Oshida Y, Sellers CB, Mirza K, et al: Corrosion of dental metallic materials by dental treatment agents. Mater Sci Eng 2005;25:343-348
9. Mabilleau G, Bourdon S, Joly-Guilou ML, et al: Influence of fluoride, hydrogen peroxide and lactic acid on the corrosion resistance of commercially pure titanium. Acta Biomater 2006;2:121-129
10. Souza JC, Henriques M, Oliveira R, et al: Do oral biofilms influence the wear and corrosion behavior of titanium? Biofouling 2010;26:471-478
11. Souza JCM, Henriques M, Oliveira R, et al: Biofilms inducing ultra-low friction on titanium. J Dent Res 2010;89:1470-1475
12. Nakagawa M, Matsuya S, Shiraishi T, et al: Effect of fluoride concentration and pH on corrosion behavior of titanium for dental use. J Dent Res 1999;78:1568-1572
13. Robin A, Meirelis JP: Influence of fluoride concentration and pH on corrosion behavior of Ti-6Al-4V and Ti-23Ta alloys in artificial saliva. Mater Corr 2007;58:173-180
14. Schiff N, Gosgpgeat B, Lissac M, et al: Influence of fluoride content and pH on the corrosion resistance of titanium and its alloys. Biomater 2002;23:1995-2002
15. Newbrun E: Topical fluorides in caries prevention and management: a North American perspective. J Dent Educ 2001;65:1078-1083
16. Broggini N, McManus LM, Hermann JS, et al: Persistent acute inflammation at the implant-abutment interface. J Dent Res 2003;82:232-237
17. Guindy JS, Schiel H, Schmidli F, et al: Corrosion at the marginal gap of implant-supported suprastructures and implant failure. Int J Oral Maxillofac Impl 2004;19:826-831
18. Engh JR CA, Moore KD, Vinh TN, et al: Titanium prosthetic wear debris in remote bone marrow. A report of two cases. J Bone Joint Surg-Am 1997;79-A:1721-1725
19. Manda MG, Psyllaki PP, Tsipas DN, et al: Clinical device-related article observations on an in-vivo failure of a titanium dental implant/abutment screw system: A case report. J Biomed Mater Res Part B: Appl Biomater 2009;89B:264-273
20. Heckmann SM, Linke JJ, Graef F, et al: Stress and inflammation as a detrimental combination for peri-implant bone loss. J Dent Res 2006;85:711-716
21. Jansen V, Conrads G, Richter E: Microbial leakage and marginal fit of the implant-abutment interface. Int J Oral Maxillofac Implants 1997;12:527-540
22. Jemt T: Failures and complications in 391 consecutively insert fixed prostheses supported by Branemark implants in edentulous jaws: a study of treatment from the time of prosthesis placement to the first annual checkup. Int J Oral Maxillofac Implants 1991;6:270-276
23. Korioth TW, Cardoso AC, Versluis A: Effect of washers on reverse torque displacement of dental implant gold retaining screws. J Prosthet Dent 1999, 82:312-316
24. Levine RA, Clem II DS, Wilson Jr TG, et al: Multicenter retrospective analysis of the ITI implant system used for single-tooth replacements: results of loading for 2 or more years. Int J Oral Maxillofac Implants 1999;14:516-520
25. Henry PJ, Laney WR, Jemt T, et al: Osseointegrated implants for single-tooth replacement: a prospective 5-year multicenter study. Int J Oral Maxillofac Implants 1996;11:450-455
26. Haack JE, Sakaguchi RL, Sun T, et al: Elongation and preload stress in dental implant abutment screws. Int J Oral Maxillofac Implants 1995;10:529-536
27. Adell RU, Lekholm U, Rockler B, et al: A 15-years study of osseointegrated implants in the treatment of the edentulous jaw. Int J Oral Surg 1981;10:387-416
28. Binon PP, McHugh M: The effect of eliminating implant/abutment rotational misfit on screw joint stability. Int J Prosthodont 1996;9:511-519
29. Binon PP: The effect of implant/abutment hexagonal misfit on screw joint stability. Int J Prosthodont 1996;9:149-160
30. Binon PP: The external hexagonal interface and screw-joint stability: a primer on threaded fasteners in implant dentistry. Quint Dent Tech 2000;2:91-105
31. Baggi L, Cappelloni I, Di Girolamo M, et al: The influence of implant diameter and length on stress distribution of osseointegrated implants related to crestal bone geometry: a three-dimensional finite element analysis. J Prosthet Dent 2008;100:422-431
32. Gratton DG, Aquilino SA, Stanford CM: Micromotion and dynamic fatigue properties of the dental implant-abutment interface. J Prosthet Dent 2001;85:47-52
33. Zavanelli RA, Henriques GE, Ferreira I, et al: Corrosion-fatigue life of commercially pure titanium and Ti-6Al-4V alloys in different storage environments. J Prosthet Dent 2000;84:274-279
34. Guindy JS, Schiel H, Schmidli F, et al: Corrosion at the marginal gap of implant-supported suprastructures and implant failure. Int J Oral Maxillofac Implants 2004;19:826-831
35. Guindy JS, Besimo CE, Besimo R, et al: Bacterial leakage into and from prefabricated screw-retained implant-borne crowns in vitro. J Oral Rehabil 1998;25:403-408
36. Quirynen M, Van Steenberghe D: Bacterial colonization of the internal part of two-stage implants. An in vivo study. Clin Oral Implants Res 1993;4:158-161
37. Quirynen M, Bollen CM, Eyssen H, et al: Microbial penetration along the implant components of the Branemark system. An in vitro study. Clin Oral Implants Res 1994;5:239-244
38. Persson LG, Lekholm U, Leonhardt A, et al: Bacterial colonization on internal surfaces of Branemark system implant components. Clin Oral Implants Res 1996;7:90-95
39. Bessimo CE, Guindy JS, Lewetag D, et al: Prevention of bacterial leakage into and from prefabricated screw-retained crowns on implants in vitro. Int J Oral Maxillofac Implants 1999;14:654-660
40. Ekfeldt A, Eriksson A, Johansson L-Ä: Stability of the screw joints in patients with implant-supported fixed prostheses in edentulous jaws: a 1-year follow-up study. Int J Prosthodont 2004;17:177-180
41. Burguete RL, Johns RB, King T, et al: Tightening characteristics for screwed joints in osseointegrated dental implants. J Prosthet Dent 1994;71:592-599
42. Schulte JK, Coffey J: Comparison of screw retention of nine abutment systems: a pilot study. Implant Dent 1997;6:28-31
43. Cibirka R, Steven K, Nelson SK, et al: Examination of the implant-abutment interface after fatigue testing. J Prosthet Dent 2001;85:268-275
44. Aboyoussef H, Weiner S, Ehrenberg D: Effect of an antirotation resistance form on screw loosening for single implant-suported crowns. J Prosthet Dent 2000;83:450-455
45. Kallus T, Bessing C: Loose gold screws frequently occur in full-arch fixed prostheses supported by osseointegrated implants after 5 years. Int J Oral Maxillofac Implants 1994;9:169-178
46. Oh K-T, Kim K-N: Electrochemical properties of suprastructures galvanically coupled to a titanium implant. J Biomed Mater Res Part B: Appl Biomater 2004;70B:318-331
47. Johansson BI, Bergman B: Corrosion of titanium and amalgam couples: effect of fluoride, area size, surface preparation and fabrication procedures. Dent Mater 1995;11:41-46
48. Oda Y, Okabe T: Effect of corrosion on the strength of soldered titanium and Ti-6Al-4V alloy. Dent Mater 1996;12:167-172
49. Reclaru L, Meyer J-M: Study of corrosion between a titanium implant and dental alloys. J Dent 1994;22:159-168
50. Taher NM, Al Jabab AS: Galvanic corrosion behavior of implant suprastructure dental alloys. Dent Mater 2003;19:54-59
51. Hoyer CA, Stanford CM, Buranadham S, et al: Dynamic fatigue properties of the dental implant-abutment interface: joint opening in wide-diameter versus standard-diameter hex-type implants. J Prosthet Dent 2001;85:599-607
52. Kuphasuk C, Oshida Y, Andres CJ, et al: Electrochemical corrosion of titanium and titanium-based alloys. J Prosthet Dent 2001;85:195-202
53. Souza JCM, Barbosa SL, Ariza E, et al: Simultaneous degradation by corrosion and wear of titanium in artificial saliva containing fluorides. Wear 2012;292-293:82-88
54. Gil FJ, Sánchez LA, Espías A, et al: In vitro corrosion behavior and metallic ion release of different prosthodontic alloys. Int Dent J 1999;49:361-367
55. Urban RM, Jacobs JJ, Tomlinson MJ, et al: Dissemination of wear particles to the liver, spleen, and abdominal lymph nodes of patients with hip or knee replacement. J Bone Joint Surg Am 2000;82:457-476
56. Wang JJ, Sanderson BJ, Wang H: Cyto- and genotoxicity of ultrafine TiO2 particles in cultured human lymphoblastoid cells. Mutation Research 2007;628:99-106
57. Norton MR: Assessment of cold welding properties of the internal conical interface of two commercially available implant systems. J Prosthet Dent 1999;81:159-166