Rheological characteristics of SBR and NR polymer modified bitumen emulsions at average pavement temperatures

Construction and Building Materials

Volumn 47, Issue , 2013, Pages 1099-1105

  Khadivar, Alireza ^a   Kavussi, Amir ^a  

^a TARBIAT MODARES UNIVERSITY   (Iran)

Author keywords

Bitumen emulsion residue; MSCR; Rheological properties; SBR and NR latexes; Temperature sweep

Indexed keywords

BITUMEN EMULSION; MSCR; MULTIPLE STRESS CREEP AND RECOVERY; PAVEMENT TEMPERATURE; POLYMER-MODIFIED BITUMEN; RHEOLOGICAL CHARACTERISTICS; RHEOLOGICAL PROPERTY; TEMPERATURE SWEEPS;

BINDERS; BITUMINOUS MATERIALS; CREEP TESTING; ELASTICITY; EMULSIFICATION; LATEXES; RHEOLOGY; STIFFNESS;

POLYMERS;

EID: 84879669431     PISSN: 09500618     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conbuildmat.2013.05.093     Document Type: Article

References (25)

1. AEMA (Asphalt Institute and Emulsified Asphalt Manufacturers Association), Emulsified Asphalt: A Basic Emulsified Asphalt Manual. Manual Series No. 19, Third Edition, Asphalt Institute, USA, 1997.
2. Epps AL, Glover JC, Barcena R. A performance-graded binder specification for surface treatments. Texas Transportation Institute, Research Report: College Station, TX, USA; 2001; p. 1710-11.
3. G. Airey Rheological evaluation of ethylene vinyl acetate polymer modified bitumen Construct Build Mater 16 2002 73 87
4. Holleran G. The use of polymer modification in slurry surfacings. ISSA Users Workshop, Columbus, Ohio, 1996. < http://www.slurry/.com/technology- paper-docs/polymer.shtml >.
5. PIARC. Use of modified bituminous binders, special bitumens and bitumens with additives in road pavements. World Road Association (PIARC): Paris, France; 1999.
6. Holleran G, Van Kirk J. Use of crumb rubber in slurry, micro surfacing and chip seal. In: Presented at 10th AAPA International Flexible Pavements Conference: Perth, Australia; 1997.
7. James A. Overview of asphalt emulsions. Transportation Research Circular. E-C102, Transportation Research Board; 2006.
8. G. Holleran, and D. Ristic Analysis of emulsion stability and asphalt compatibility 1999 Presented at Bitumen Asia Conference Singapore
9. C. Lubbers, and S. Watson Basics of polymers in asphalt emulsions 2005 BASF Corporation Web Seminar
10. Asphalt Institute, Quantification of the effects of polymer modified asphalt for reducing pavement distress. Engineering, Report 215 (ER-215), 2001.
11. Johnston J, King G. Polymer modified asphalt emulsion. National Center for Pavement Preservation. Report No: FHWA-CFL/TD-08-00x; 2009.
12. G. King Additives in asphalt J Assoc Asphalt Paving Technol A 68 1999 32 69
13. R. Roque, B. Birgisson, M. Tia, B. Kim, and Z. Cui Guidelines for the use of modifiers in superpave mixtures: Executive summary and volume 1 of 3 volumes: Evaluation of SBS modifier, State Job 99052793 2004 Florida Department of Transportation Tallahassee, FL
14. Y. Yildirim Polymer modified asphalt binders Construct Build Mater 21 2007 66 72 (Pubitemid 44189823)
15. Y. Becker, M. Méndez, and Y. RodrÍguez Polymer modified asphalt Vis Tecnol 9 2001 39 50 (Pubitemid 34209581)
16. A. Forbes, R.G. Haverkamp, T. Robertson, J. Bryant, and S. Bearsley Studies of the microstructure of polymer-modified bitumen emulsions using confocal laser scanning microscopy J Microsc 204 2001 252 257 (Pubitemid 34075123)
17. Takamura K, Heckmann W. Polymer network formation in the emulsion residue recovered by forced air drying. In: Presented at 2nd International Symposium Asphalt Emulsion Tech: Washington, DC; 1999.
18. H. Bahia, D. Hanson, M. Zeng, H. Zhai, M. Khatri, and R. Anderson Characterization of modified asphalt binders in superpave mix design NCHRP Report 459 2001 National Academy Press Washington, DC
19. H. Bahia, H. Zhai, M. Zeng, Y. Hu, and P. Turner Development of binder specification parameters based on characterization of damage behavior J Assoc Asphalt Paving Technol 70 2001 442 470 (Pubitemid 34573375)
20. Delgadillo R, Cho D, Bahia H. Non linearity of repeated creep and recovery binder test and the relationship with mixture permanent deformation. In: 85th Transportation Research Board Conference: Washington, DC., USA; 2006.
21. Kose S, Guler M, Bahia H, Massad E. Distribution of strains within asphalt binders in HMA using imaging and finite element techniques. In: 79th Transportation Research Board Conference: Washington, DC., USA; 2000.
22. D'Angelo J. Development of a performance based binder specification for rutting using creep and recovery testing. In: PhD thesis. University of Calgary: Canada; 2009.
23. D. Whiteoak, and J.M. Read The shell bitumen handbook 5th ed. 1999 Thomas Telford Services Ltd. London, UK 137
24. Delgadillo R, Nam K, Bahia H. Why do we need to change G*/sin δ and how?. In: 83rd. Transportation Research Board Conference: Washington, DC, USA; 2004.
25. Bahia H, Zhai H, Rangel A. The LAST, the PAT, and the modified RTFO: new test methods for better characterization of modified asphalt binders. In: 77th Transportation Research Board Conference: Washington, DC, USA; 1998.