Damage identification and assessment in rc structures using vibration data: A review

Journal of Civil Engineering and Management

Volumn 19, Issue 3, 2013, Pages 375-386

  Fayyadh, Moatasem Mohammed ^a   Razak, Hashim Abdul ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

Author keywords

damage classification; damage detection; modal testing; RC composite action; support conditions

Indexed keywords

COMPOSITE ACTION; CONVENTIONAL TECHNIQUES; DAMAGE CLASSIFICATION; DAMAGE IDENTIFICATION; EXPERIMENTAL APPROACHES; MODAL TESTINGS; STRUCTURAL ASSESSMENTS; SUPPORT CONDITIONS;

DAMAGE DETECTION; REINFORCED CONCRETE;

MODAL ANALYSIS;

EID: 84879651051     PISSN: 13923730     EISSN: 18223605     Source Type: Journal    
DOI: 10.3846/13923730.2012.744773     Document Type: Review

References (100)

1. Abdul Razak, H.; Choi, F. C. 2001. The effect of corrosion on the natural frequency and modal damping of reinforced concrete beams, Engineering Structures 23(9): 1126-1133. http://dx.doi.org/10.1016/S0141-0296(01)00005-0
2. Abe, M.; Fujino, Y.; Yoshida, J. 2000. Dynamic behaviour and seismic performance of base-isolated bridges in observed seismic records, in Proc. of the 12th World Conference on Earthquake Engineering, 30 January -4 February, 2000, Auckland, New Zealand, 6 p.
3. Adachi, Y.; Kagayama, T.; Unjoh, S.; Kondoh, M. 2000. Non-linear seismic response characteristics study of a RC bridge column with seismic isolators by a shaking table test, in Proc. of the 12th World Conference on Earthquake Engineering, 30 January - 4 February, 2000, Auckland, New Zealand. 8 p.
4. Alampalli, S. 2000. Effects of testing, analysis, damage, and enviroment on modal parameters, Mechanical Systems and Signal Processing 14(1): 63-74. http://dx.doi.org/10.1006/mssp.1999.1271
5. AlShaarbaf, I. 1990. Three-dimensional nonlinear finite element analysis of reinforced concrete beams in torsion. PhD Thesis. University of Bradford, UK.
6. Ando, Y.; Sakakibara, M.; Yamandoe, S.; Ohbo, N. 1998. Seismic evaluation of actual bridge with isolators by vibration tests, in Proc. of the Second World Conference on Structural Control, 28 June - 01 July, 1998, Kyoto, Japan, 913-922.
7. Begg, R.; Mackenzoland, A.; Dodds, C.; Loland, O. 1976. Structural integrity monitoring using digital processing of vibration signals, in Proc. of the 8th Annual Offshore Technical Conference, 1976, Houston, Texas, 305-311. http://dx.doi.org/10.4043/2549-MS
8. Berto, L.; Simioni, P.; Saetta, A. 2008. Numerical modeling of bond behaviour in RC structures affected by reinforcement corrosion, Engineering Structures 30(5): 1375-1385. http://dx.doi.org/10.1016/j.engstruct.2007.08.003
9. Buckle, I.; Mayes, R. 1990. Seismic isolation: history, application and performance - a world view, Earthquake Spectra 6(2): 161-202. http://dx.doi.org/10.1193/1.1585564
10. Cao, M.; Ye, L.; Zhou, L.; Su, Z.; Bai, R. 2011. Sensitivity of fundamental mode shape and static deflection for damage identification in cantilever beams, Mechanical Systems and Signal Processing 25(2): 630-643. http://dx.doi.org/10.1016/j.ymssp.2010.06.011
11. Carne, T.; Dohrmam, C. 1998. Support conditions, their effect on measured modal parameters, in Proc. of the 16th International Modal Analysis Conference, 477-483.
12. Carne, T.; Griffith, D.; Casias, M. 2007. Support conditions for experimental modal analysis, Sound and Vibration Magazine 41: 10-15.
13. Catbas, F. N.; Gul, M.; Burkett, J. L. 2008. Conceptual damage-sensitive features for structural health monitoring: laboratory and field demonstrations, Mechanical Systems and Signal Processing 22(7): 1650-1669. http://dx.doi.org/10. 1016/j.ymssp.2008.03.005
14. Chen, W.-F. 1982. Plasticity in reinforced concrete. New York: McGraw-Hill Book Company. 474 p.
15. Choi, F. C.; Li, J.; Samali, B.; Crews, K. 2008. Application of the modified damage index method to timber beams, Engineering Structures 30(4): 1124-1145. http://dx.doi.org/10.1016/j.engstruct.2007.07.014
16. Choubey, A.; Sehgal, D.; Tandon, N. 2006. Finite element analysis of vessels to study changes in natural frequencies due to cracks, International Journal of Pressure Vessels and Piping 83(3): 181-187. http://dx.doi.org/10. 1016/j.ijpvp.2006.01.001
17. Coppolino, R.; Rubin, S. 1980. Detectability of structural failures in offshore platforms by ambient vibration monitoring, in Proc. of the 12th Annual Offshore Technical Conference, 101-110. http://dx.doi.org/10.4043/3865-MS
18. Dahou, Z.; Sbartaï, Z.; Castel, A.; Ghomari, F. 2009. Artificial neural network model for steel concrete bond prediction, Engineering Structures 31(8): 1724-1733. http://dx.doi.org/10.1016/j.engstruct.2009.02.010
19. Dai, W.; Moroni, M. O.; Roesset, J. M.; Sarazin, M. 2006. Effect of isolation pads and their stiffness on the dynamic characteristics of bridge, Engineering Structures 28(9): 1298-1306. http://dx.doi.org/10.1016/j.engstruct. 2005.12.012
20. Doebling, S.W.; Farrar, C. R.; Prime,M. B. 1998.Asummary review of vibration-based damage identification methods, The Shock and Vibration Digest 30(2): 91-105. http://dx.doi.org/10.1177/058310249803000201
21. Douka, E.; Bamnios, G.; Trochidis, A. 2004. A method for determining the location and depth of cracks in doublecracked beams, Applied Acoustics 65(10): 997-1008. http://dx.doi.org/10.1016/j.apacoust.2004.05.002
22. Dutta, A.; Talukdar, S. 2004. Damage detection in bridge using accurate modal parameters, Finite Elements in Analysis and Design 40(3): 287-304. http://dx.doi.org/10.1016/S0168-874X(02)00227-5
23. Fang, C.; Gylltoft, K.; Lundgren, K.; Plos, M. 2006. Effect of corrosion on bond in reinforced concrete under cyclic loading, Cement and Concrete Research 36(3): 548-555. http://dx.doi.org/10.1016/j.cemconres.2005.11.019
24. Guradelli, R.; Riera, J.; Ambrosini, D.; Amani, M. 2008. Damage detection by means of structural damping identification, Engineering Structuers 30(12): 3497-3504. http://dx.doi.org/10.1016/j.engstruct.2008.05.024
25. Haskett, M.; Oehlers, D. J.; Ali, M. S. M. 2008. Local and global bond characteristics of steel reinforcing bars, Engineering Structures 30(2): 376-383. http://dx.doi.org/10.1016/j.engstruct.2007.04.007
26. Hughes, B. P.; Chapman, G. P. 1966. The deformation of concrete and micro concrete in compression and tension with particular reference to aggregate size, Magazine of Concrete Research 18: 19-24. http://dx.doi.org/10.1680/macr. 1966.18.54.19
27. Ichinose, T.; Kanayama, Y.; Inoue, Y.; Bolander, Jr. J. E. 2004. Size effect on bond strength of deformed bars, Construction and Building Materials 18(7): 549-558. http://dx.doi.org/10.1016/j.conbuildmat.2004.03.014
28. Ismail, Z. 2005. Damage detection of reinforced concrete beams using modal testing. PhD Thesis. University of Malaya, Kuala Lumpur, Malaysia.
29. Ismail, Z.; Abdul Razak, H.; Abdul Rahman, A. 2006. Determination of damage location in RC beams using mode shape derivatives, Engineering Structures 28(11): 1566-1573. http://dx.doi.org/10.1016/j.engstruct.2006.02.010
30. Iwata, S.; Iemura, H.; Honda, A.; Sakai, K.; Fukushima, T.; Sugiyama, K. 2000. Hybrid earthquake loading test (pseudo-dynamic test) of bi-directional base isolation bearing for a large pedestrian bridge, in Proc. of the 12th World Conference on Earthquake Engineering, 30 January-4 February, 2000, Auckland, New Zealand, 8 p.
31. Jangid, R. S. 1996. Seismic response of sliding structures to bidirectional earthquake excitations, Earthquake Engineering & Structural Dynamics 25(11): 1301-1306. http://dx.doi.org/10.1002/(SICI)1096-9845(199611)25: 11B1301::AID-EQE618-3.0.CO;2-3
32. Jangid, R.; Datta, T. 1995. Seismic behaviour of baseisolated buildings: a state-of-the-art review, Proceedings of the ICE - Structures and Buildings 110(2): 186-203. http://dx.doi.org/10.1680/istbu.1995.27599
33. Kamiński, M.; Musiał, M.; Ubysz, A. 2011. Eigenfrequencies of the reinforced concrete beams - methods of calculations, Journal of Civil Engineering and Management 17(2): 278-283.
34. Karsan, I. D.; Jirsa, J. O. 1969. Behavior of concrete under compressive loadings, Journal of the Structural Division ASCE 95: 2543-2563.
35. Kato, M.; Shimada, S. 1986. Vibration of bridge during the failure process, Journal of Structural Engineering ASCE 112(7): 1692-1703. http://dx.doi.org/10.1061/(ASCE)0733-9445(1986)112:7(1692)
36. Kelly, J. M. 1986. Aseismic base isolation: review and bibliography, Soil Dynamics and Earthquake Engineering 5(4): 202-216. http://dx.doi.org/10.1016/ 0267-7261(86)90006-0
37. Kelly, J. M. 1997. Earthquake-resistant design with rubber. NY: Springer-Verlag, Inc, 243 p. http://dx.doi.org/10.1007/978-1-4471-0971-6
38. Kelly, T.; Jones, L.; Mayes, R. 1984. Seismic retrofit of bridges utilising ductile base isolation concepts, in Proc. of the 8th World Conference on Earthquake Engineering, New Jersey, California, 1984, 651-658.
39. Khalfallah, S. 2008. Tension stiffening bond modelling of cracked flexural reinforced concrete beams, Journal of Civil Engineering and Management 14(2): 131-137. http://dx.doi.org/10.3846/1392-3730.2008.14.8
40. Khiem, N. T.; Lien, T. V. 2001. A simplified method for natural frequency analysis of a multiple cracked beam, Journal of Sound and Vibration 245(4): 737-751. http://dx.doi.org/10.1006/jsvi.2001.3585
41. Kim, D.-G.; Lee, S.-B. 2010. Structural damage identification of a cantilever beam using excitation force level control, Mechanical Systems and Signal Processing 24(6): 1814-1830. http://dx.doi.org/10.1016/j.ymssp.2010.02. 007
42. Kim, J.-T.; Park, J.-H.; Lee, B.-J. 2007. Vibration-based damage monitoring in model plate-girder bridge under uncertain temperature conditions, Engineering Structures 29(7): 1354-1365. http://dx.doi.org/10.1016/j.engstruct. 2006.07.024
43. Kim, J.-T.; Ryu, Y.-S.; Cho, H.-M.; Stubbs, N. 2003. Damage identification in beam-type structures: frequency-based method vs mode-shape-based method, Engineering Structures 25(1): 57-67. http://dx.doi.org/10.1016/S0141-0296(02)00118-9
44. Kim, J.-T.; Stubbs, N. 2002. Improved damage identification method based on modal information, Journal of Sound and Vibration 252(2): 223-238. http://dx.doi.org/10.1006/jsvi.2001.3749
45. Kisa, M.; Gurel, M. A. 2007. Free vibration analysis of uniform and stepped cracked beams with circular cross sections, International Journal of Engineering Science 45(2-8): 364-380.
46. Kotsovos, M. D.; Newman, J. B. 1977. Behavior of concrete under multiaxial stress, ACI Journal Proceedings 74(9): 443-446.
47. Kupfer, H.; Hilsdorf, H. K.; Rusch, H. 1969. Behavior of concrete under biaxial stresses, ACI Journal Proceedings 66(8): 656-666.
48. Lakshmanan, N.; Raghuprasad, B. K.; Gopalakrishnan, N.; Sathishkumar, K.; Murthy, S. G. N. 2010. Detection of contiguous and distributed damage through contours of equal frequency change, Journal of Sound and Vibration 329(9): 1310-1331. http://dx.doi.org/10.1016/j.jsv.2009.11.006
49. Law, S. S.; Lu, Z. R. 2005. Crack identification in beam from dynamic response, Journal of Sound and Vibration 285(4-5): 967-987. http://dx.doi.org/ 10.1016/j.jsv.2004.09.036
50. Lee, Y.-S.; Chung, M.-J. 2000. A study on crack detection using eigenfrequency test data, Computers & Structures 77(3): 327-342. http://dx.doi.org/10.1016/S0045-7949(99)00194-7
51. Lewandowski, R.; Grzymisławska, J. 2009. Dynamic analysis of structures with multiple tuned mass dampers, Journal of Civil Engineering and Management 15(1): 77-86. http://dx.doi.org/10.3846/1392-3730.2009.15.77-86
52. Limongelli, M. P. 2010. Frequency response function interpolation for damage detection under changing environment, Mechanical Systems and Signal Processing 24(8): 2898-2913. http://dx.doi.org/10.1016/j.ymssp.2010.03.004
53. Lindorf, A.; Lemnitzer, L.; Curbach, M. 2009. Experimental investigations on bond behaviour of reinforced concrete under transverse tension and repeated loading, Engineering Structures 31(7): 1469-1476. http://dx.doi.org/10.1016/j. engstruct.2009.02.025
54. Loutridis, S.; Douka, E.; Hadjileontiadisc, L. J. 2005. Forced vibration behavior and crack detection of cracked beams using instantaneous frequency, NDT & E International 38(5): 411-419. http://dx.doi.org/10.1016/j.ndteint.2004. 11.004
55. Maeck, J.; Abdel Wahab, M.; Peeters, B.; De Roeck, G.; De Visscher, J.; De Wilde, W. P.; Ndambi, J.-M.; Vantomme, J. 2000. Damage identification in reinforced concrete structures by dynamic stiffness determination, Engineering Structures 22(10): 1339-1349. http://dx.doi.org/10.1016/S0141-0296(99)00074-7
56. Maeck, J.; De Roeck, G. 1999. Dynamic bending and torsion stiffness derivation from modal curvature and torsion rates, Journal of Sound and Vibration 225(1): 153-170. http://dx.doi.org/10.1006/jsvi.1999.2228
57. Marfia, S.; Rinaldi, Z.; Sacco, E. 2004. Softening behavior of reinforced concrete beams under cyclic loading, International Journal of Solids and Structures 41(11-12): 3293-3316. http://dx.doi.org/10.1016/j.ijsolstr.2003.12. 015
58. Naeim, F.; Kelly, J. M. 1999. Design of seismic isolated structures: from theory to practice. New York: John Wiley & Sons, 304 p. http://dx.doi.org/10.1002/9780470172742
59. Nahvi, H.; Jabbari, M. 2005. Crack detection in beams using experimental modal data and finite element model, International Journal of Mechanical Sciences 47(10): 1477-1497. http://dx.doi.org/10.1016/j.ijmecsci.2005.06.008
60. Ndambi, J.-M.; Vantomme, J.; Harri, K. 2002. Damage assessment in reinforced concrete beams using eigenfrequencies and mode shape derivatives, Engineering Structures 24(4): 501-515. http://dx.doi.org/10.1016/S0141-0296(01) 00117-1
61. Neville, A.; Brooks, J. 1987. Concrete technology. New York, Harlow, Essex, UK: Longman Scientific & Technical; New York: J. Wiley, 452 p.
62. Orhan, S. 2007. Analysis of free and forced vibration of a cracked cantilever beam, NDT & E International 40(6): 443-450. http://dx.doi.org/10. 1016/j.ndteint.2007.01.010
63. Pandey, A. K.; Biswas, M.; Samman, M. M. 1991. Damage detection from change in curvature mode shapes, Journal of Sound and Vibration 145(2): 321-332. http://dx.doi.org/10.1016/0022-460X(91)90595-B
64. Park, S.; Kim, Y.-B. 2002. Nondestructive damage detection in large structures via vibration monitoring, Electronic Journal of Structural Engineering 2: 59-75.
65. Patil, D. P.; Maiti, S. K. 2003. Detection of multiple cracks using frequency measurements, Engineering Fracture Mechanics 70(12): 1553-1572. http://dx.doi.org/10.1016/S0013-7944(02)00121-2
66. Patil, D. P.; Maiti, S. K. 2005. Experimental verification of a method of detection of multiple cracks in beams based on frequency measurements, Journal of Sound and Vibration 281(1-2): 439-451. http://dx.doi.org/10.1016/j.jsv.2004. 03.035
67. Perera, R.; Huerta, C.; Orquín, J. M. 2008. Identification of damage in RC beams using indexes based on local modal stiffness, Construction and Building Materials 22(8): 1656-1667. http://dx.doi.org/10.1016/j. conbuildmat.2007.06.012
68. Radzieński, M.; Krawczuk, M.; Palacz, M. 2011. Improvement of damage detection methods based on experimental modal parameters, Mechanical Systems and Signal Processing 25(6): 2169-2190. http://dx.doi.org/10.1016/j. ymssp.2011.01.007
69. Ratcliffe, C. 1997. Damage detection using a modified Laplacian operator on mode shape data, Journal of Sound and Vibration 204(3): 505-517. http://dx.doi.org/10.1006/jsvi.1997.0961
70. Rehm, G. 1961. On the fundamentals of steel-concrete bond, Deutscher Ausschuss fur Stahlbeton 138: 1-59 (in German).
71. Reinhorn, A.; Simeonov, V.; DeRue, G.; Constantinou, M. 1998. Sensitivity of response of isolated bridges to modelling and design parameters: a case study, in The U.S.-Italy Workshop on Seismic Protective Systems for Bridges. NY: MCEER.
72. Ruotolo, R.; Surace, C. 1997. Damage assessment of multiple cracked beams: numerical results and experimental validation, Journal of Sound and Vibration 206(4): 567-588. http://dx.doi.org/10.1006/jsvi.1997.1109
73. Rytter, A. 1993. Vibration based inspection of civil engineering structures. PhD Thesis. Aalborg University, Denmark.
74. Salawu, O. S. 1997. Detection of structural damage through change in frequency: a review, Engineering Structures 19(9): 718-723. http://dx.doi.org/ 10.1016/S0141-0296(96)00149-6
75. Salawu, O. S.; Williams, C. 1995. Bridge assessment using forced-vibration testing, Journal of Structural Engineering ASCE 121(2): 161-173. http://dx.doi.org/10.1061/(ASCE)0733-9445(1995)121:2(161)
76. Scanlon, A. 1971. Time dependent deflections of reinforced concrete slabs. PhD Thesis. University of Alberta Edmonton, Alberta, Canada.
77. Skinner, R. I.; Robinson, W. H.; McVerry, G. H. 1993. An introduction to seismic isolation. Chichester:Wiley. 376 p.
78. Souza, M. A. 1994. The influence of changing support conditions on the vibration of buckled plates, Thin-Walled Structures 18(2): 133-143. http://dx.doi.org/10.1016/0263-8231(94)90014-0
79. Stramandinoli, R. S.; La Lovere, H. L. 2008. An efficient tension-stiffening model for nonlinear analysis of reinforced concrete members, Engineering Structures 30 (7): 2069-2080. http://dx.doi.org/10.1016/j.engstruct. 2007.12.022
80. Stubbs, N.; Kim, J.-T. 1996. Damage localization in structures without baseline modal parameters, AIAA Journal 34(8): 1644-1649. http://dx.doi.org/10. 2514/3.13284
81. Sugiyama, T. 2000. Comparison of seismic response between bridge with sliding type base isolation system and that with laminated rubber bearing, in Proc. of the 12th World Conference on Earthquake Engineering, 30 January - 4 February, 2000, Auckland, New Zealand, 8 p.
82. Tasuji, M. E.; Slate, F. O.; Nilson, A. H. 1978. Stress-strain response and fracture of concrete in biaxial loading, ACI Journal Proceedings 75(7): 306-312.
83. Todorovska, M. I.; Trifunac, M. D. 2010. Earthquake damage detection in the Imperial County Services Building II: analysis of novelties via wavelets, Structural Control and Health Monitoring 17(8): 895-917. http://dx.doi.org/10. 1002/stc.350
84. Tomaszewska, A. 2010. Influence of statistical errors on damage detection based on structural flexibility and mode shape curvature, Computers& Structures 88(3-4): 154-164. http://dx.doi.org/10.1016/j.compstruc.2009.08.017
85. Tongaonkar, N. P.; Jangid, R. S. 1998. Seismic response of bridges with sliding isolation devices, ISET Journal of Earthquake Technology 35(1-3): 9-27.
86. Tsai, H.-C.; Kelly, J. M. 1993. Seismic response of heavily damped base isolated buildings, Earthquake Engineering & Structural Dynamics 22(7): 633-645. http://dx.doi.org/10.1002/eqe.4290220707
87. Tsopelas, P.; Constantinou, M. C.; Kim, S.; Okamoto, S. 1996. Experimental study of FPS system in bridge seismic isolation, Earthquake Engineering & Structural Dynamics 25(1): 65-78. http://dx.doi.org/10.1002/ (SICI)1096-9845(199601)25:1B65::AID-EQE536-3.0.CO;2-A
88. Vandiver, J. 1975. Detection of structural failure on fixed platforms by measurement of dynamic response, in The 7th Annual Offshore Technical Conference, 243-252.
89. Viola, E.; Guidi, F. 2009. Influence of the supporting braces on the dynamic control of buildings with added viscous dampers, Structural Control and Health Monitoring 16(3): 267-286. http://dx.doi.org/10.1002/stc.234
90. Wahab, M. M. A.; De Roeck, G. 1999. Damage detection in bridges using modal curvature: Application to a real damage scenario, Journal of Sound and Vibration 226(2): 217-235. http://dx.doi.org/10.1006/jsvi.1999.2295
91. Wang, H. 2009. An analytical study of bond strength associated with splitting of concrete cover, Engineering Structures 31(4): 968-975. http://dx.doi.org/10.1016/j.engstruct.2008.12.008
92. Wang, X.; Liu, X. 2003. A strain-softening model for steel concrete bond, Cement and Concrete Research 33(10): 1669-1673. http://dx.doi.org/10.1016/ S0008-8846(03)00137-6
93. Wang, J.; Qiao, P. 2008. On irregularity-based damage detection method for cracked beams, International Journal of Solids and Structures 45(2): 688-704. http://dx.doi.org/10.1016/j.ijsolstr.2007.08.017
94. West, W. 1984. Illustration of the use of modal assurance criterion to detect structural changes in an orbiter test specimen, in Air Force Conference on Aircraft Structural Integrity, 1-6.
95. Wolf, Jr. J. 1984. The influence of mounting stiffness on frequencies measured in a vibration test, SAE Technical Paper 840480.
96. Xia, Y.; Hao, H.; Deeks, A. J. 2007. Dynamic assessment of shear connectors in slab-girder bridges, Engineering Structures 29(7): 1475-1486. http://dx.doi.org/10.1016/j.engstruct.2006.09.014
97. Xiaoming, L. 1989. Optimisation of the stochastic response of a bridge isolation system with hysteretic dampers, Earthquake Engineering & Structural Dynamics 18(7): 951-964. http://dx.sdoi.org/10.1002/eqe.4290180703
98. Zhong, S.; Oyadiji, S. O. 2011. Crack detection in simply supported beams using stationary wavelet transform of modal data, Structural Control and Health Monitoring 18(2): 169-190. http://dx.doi.org/10.1002/stc.366
99. Zhua, H.; Li, L.; He, X.-Q. 2011. Damage detection method for shear buildings using the changes in the first mode shape slopes, Computers & Structures 89(9-10): 733-743. http://dx.doi.org/10.1016/j.compstruc.2011.02.014
100. Zonta, D.; Elgamal, A.; Fraser, M.; Priestley, M. J. N. 2008. Analysis of change in dynamic properties of a frameresistant test building, Engineering Structures 30(1): 183-196. http://dx.doi.org/10.1016/j.engstruct.2007.02.022