Development and characterization of epoxy nanocomposites based on nano-structured oil palm ash

Composites Part B: Engineering

Volumn 53, Issue , 2013, Pages 324-333

  Abdul Khalil, H P S ^a   Fizree, H M ^a   Bhat, A H ^b   Jawaid, M ^c   Abdullah, C K ^a  

^a Universiti Sains Malaysia   (Malaysia)

^b DEPARTMENT OF CHEMICAL ENGINEERING   (Malaysia)

^c UNIVERSITY PUTRA MALAYSIA   (Malaysia)

Author keywords

A. Nano structures; A. Polymer matrix composites (PMCs); B. Mechanical properties; D. Electron microscopy

Indexed keywords

DRIVING FORCES; EPOXY COMPOSITE; EPOXY NANOCOMPOSITES; FILLER MATERIALS; HIGH-ENERGY BALL MILLING; NANO-STRUCTURED; POLYMER MATRIX COMPOSITES (PMCS); SCIENTIFIC INFORMATION;

AGRICULTURAL WASTES; ALUMINA; BALL MILLING; EPOXY RESINS; FILLED POLYMERS; FILLERS; MECHANICAL PROPERTIES; NANOCOMPOSITES; NANOSTRUCTURES;

PALM OIL;

EID: 84879643573     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2013.04.013     Document Type: Article

References (37)

1. Y.N. Foo, K.Y. Foong, Y. Basiron, and K. Sundram A renewable future driven with malaysian palm oil-based green technology J Oil Palm Environ (JOPE) 2 2011 1 7
2. Hashim MA, Chu KH. Adsorption of metal ions on oil palm ash: application of a surface reaction rate model. In: Proceedings of 9th Asian Pacific confederation of chemical engineering congress. Christchurch, New Zealand; 2002.
3. J.-H. Tay, and K.-Y. Show Use of ash derived from oil-palm waste incineration as a cement replacement material Resour, Conserv Recy 13 1995 27 36
4. J.-H. Tay, and K.-Y. Show Utilization of ashes from oil-palm wastes as a cement replacement material Water Sci Technol 34 1996 185 192 (Pubitemid 27042643)
5. K.H. Chu, and M.A. Hashim Adsorption and desorption characteristics of zinc on ash particles derived from oil palm waste J Chem Technol Biotechnol 77 2002 685 693 (Pubitemid 34516384)
6. N.F. Zainudin, K.T. Lee, A.H. Kamaruddin, S. Bhatia, and A.R. Mohamed Study of adsorbent prepared from oil palm ash (OPA) for flue gas desulfurization Sep Purif Technol 45 2005 50 60 (Pubitemid 41050732)
7. H.P.S. Abdul Khalil, H.M. Fizree, M. Jawaid, and O.S. Allatas Preparation and characterization of nanostructured materials from oil palm ash: a bioagricultural waste from oil palm mill BioResources 6 2011 4537 4546
8. S.J. Ahmadi, Y.D. Huang, and W. Li Synthetic routes, properties and future applications of polymer-layered silicate nanocomposites J Mater Sci 39 2004 1919 1925
9. J. Njuguna, and K. Pielichowski Polymer nanocomposites for aerospace applications: properties Adv Eng Mater 5 2003 769 778
10. H. Ismail, and F.S. Haw Effects of palm ash loading and maleated natural rubber as a coupling agent on the properties of palm-ash-filled natural rubber composites J Appl Polym Sci 110 2008 2867 2876
11. H. Ismail, and F.S. Haw Curing characteristics and mechanical properties of hybrid palm ash/silica/natural rubber composites J Reinf Plast Compos 29 2010 105 111
12. H. Ismail, and S.M. Shaari Curing characteristics, tensile properties and morphology of palm ash/halloysite nanotubes/ethylene-propylene-diene monomer (EPDM) hybrid composites Polym Test 29 2010 872 878
13. A.H. Bhat, and H.P.S. Abdul Khalil Exploring "nano filler" based on oil palm ash in polypropylene composites BioResources 6 2011 1288 1297
14. B. Öztürk Hybrid effect in the mechanical properties of jute/rockwool hybrid fibres reinforced phenol formaldehyde composites Fibers Polym 11 2010 464 473
15. H. Mahfuz Structural nanocomposites Mark J Schulz, Ajit D Kelkar, M.J. Sundaresan, Nanoengineering of structural functional and smart materials 1st ed. 2005 CRC Press 736 [ISBN-10: 0849316537]
16. M. Tajvidi, and G. Ebrahimi Water uptake and mechanical characteristics of natural filler-polypropylene composites J Appl Polym Sci 88 2003 941 946 (Pubitemid 36312416)
17. H.V. Ramakrishna, S.P. Priya, and S.K. Rai Effect of fly ash content on impact, compression, and water absorption properties of epoxy toughened with epoxy phenol cashew nut shell liquid-fly ash composites J Reinf Plast Compos 25 2006 455 462
18. A. Apicella, L. Egiziano, L. Nicolais, and V. Tucci Environmental degradation of the electrical and thermal properties of organic insulating materials J Mater Sci 23 1988 729 735 (Pubitemid 18592713)
19. 2 nanocomposites prepared by melt mixing Eur Polym J 41 2005 1965 1978 (Pubitemid 40970670)
20. S. Sun, C. Li, L. Zhang, H.L. Du, and J.S. Burnell-Gray Effects of surface modification of fumed silica on interfacial structures and mechanical properties of poly(vinyl chloride) composites Eur Polym J 42 2006 1643 1652 (Pubitemid 44183589)
21. C.L. Wu, M.Q. Zhang, M.Z. Rong, and K. Friedrich Tensile performance improvement of low nanoparticles filled-polypropylene composites Compos Sci Technol 62 2002 1327 1340
22. 3 composites J Macromol Sci, Part B 38 1999 885 899
23. 2/PP composites in relation to percolation mechanism Polymer 42 2001 3301 3304 (Pubitemid 32110079)
24. 2 nanocomposites Mater Sci Eng: A 361 2003 358 366 (Pubitemid 37293240)
25. M. Ayatollahi, E. Alishahi, and S. Shadlou Mechanical behavior of nanodiamond/epoxy nanocomposites Int J Fract 170 2011 95 100
26. I. Neitzel, V. Mochalin, I. Knoke, G.R. Palmese, and Y. Gogotsi Mechanical properties of epoxy composites with high contents of nanodiamond Compos Sci Technol 71 2011 710 716
27. L.E. Nielsen, and R.F. Landel Mechanical properties of polymers and composites 2nd ed. 1993 CRC Press p. 580, ISBN-10: 0824789644
28. S. Muhammad Firdaus, and M. Mariatti Fabrication and characterization of nano filler-filled epoxy composites for underfill application J Mater Sci: Mater Electron 2011 1 7
29. F.N. Ahmad, M. Jaafar, S. Palaniandy, and K.A.M. Azizli Effect of particle shape of silica mineral on the properties of epoxy composites Compos Sci Technol 68 2008 346 353 (Pubitemid 350286666)
30. A.H. Hemmasi, H. Khademi-Eslam, M. Talaiepoor, B. Kord, and I. Ghasemi Effect of nanoclay on the mechanical and morphological properties of wood polymer nanocomposite J Reinf Plast Compos 29 2010 964 971
31. L.-Y. Lin, J.-H. Lee, C.-E. Hong, G.-H. Yoo, and S.G. Advani Preparation and characterization of layered silicate/glass fiber/epoxy hybrid nanocomposites via vacuum-assisted resin transfer molding (VARTM) Compos Sci Technol 66 2006 2116 2125 (Pubitemid 44070617)
32. G. Suriati, M. Mariatti, and A. Azizan Effects of filler shape and size on the properties of silver filled epoxy composite for electronic applications J Mater Sci: Mater Electron 22 2011 56 63
33. A. Chatterjee Properties improvement of PMMA using nano TiO2 J Appl Polym Sci 118 2010 2890 2897
34. 2-epoxy nanocomposite Mater Sci Eng: A 487 2008 574 585 (Pubitemid 351676800)
35. H. He, K. Li, J. Wang, G. Sun, Y. Li, and J. Wang Study on thermal and mechanical properties of nano-calcium carbonate/epoxy composites Materials AMP; Des 32 2011 4521 4527
36. Yu Xiaoyan, Qu Xiongwei, K. Naito, and Zhang Qingxin Synthesis, tensile, and thermal properties of polyimide/diamond nanocomposites J Reinf Plast Compos 30 2011 661 670
37. 2 on the performance of nanocomposites Mater Lett 57 2003 2940 2944