Modeling of water migration during internal curing with superabsorbent polymers

Journal of Materials in Civil Engineering

Volumn 24, Issue 8, 2012, Pages 1006-1016

  Wyrzykowski, Mateusz ^a,b   Lura, Pietro ^a,c   Pesavento, Francesco ^d   Gawin, Dariusz ^b  

^a SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^b LODZ UNIVERSITY OF TECHNOLOGY   (Poland)

^c ETH ZURICH   (Switzerland)

^d UNIVERSITY OF PADOVA   (Italy)

Author keywords

High performance concrete; Internal curing; Modeling; Superabsorbent polymers; Transport properties; Water transport

Indexed keywords

CAPILLARY POROSITY; CEMENTITIOUS MATERIALS; DISTRIBUTION OF WATER; HYDRATING CEMENT PASTES; INTERNAL CURING; SUPERABSORBENT POLYMER; WATER TRANSPORT; WATER-TO-CEMENT RATIOS;

ELECTRON TRANSPORT PROPERTIES; HARDENING; HIGH PERFORMANCE CONCRETE; HYDRATION; MODELS; POLYMERS; TRANSPORT PROPERTIES;

CURING;

CONCRETE; FLOW MODELING; HYDRATION; NUMERICAL MODEL; PERMEABILITY; POLYMER; POROSITY; WATER FLOW;

EID: 84879607784     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)MT.1943-5533.0000448     Document Type: Article

References (47)

1. Baroghel-Bouny, V., Mainguy, M., Lassabatere, T., and Coussy, O. (1999). "Characterization and identification of equilibrium and transfer moisture properties for ordinary and high-performance cementitious materials." Cem. Concr. Res., 29(8), 1225-1238.
2. Bear, J. (1988). Dynamics of fluids in porous media, Dover, Mineola, NY.
3. Bentz, D. P., and Garboczi, E. J. (1991). "Percolation of phases in a threedimensional cement paste microstructural model." Cem. Concr. Res., 21(2-3), 325-344.
4. Bentz, D. P., Garboczi, E. J., and Snyder, K. A. (1999). "A hard core/soft shell microstructural model for studying percolation and transport in three dimensional composite media." NISTIR 6265, U.S. Dept. of Commerce, Washington, DC.
5. Bentz, D. P., Koenders, E. A. B., Mönnig, S., Reinhardt, H.-W., van Breugel, K., and Ye, G. (2007). "Materials science-based models." Internal curing of concrete-State-of-the-art Report of RILEM Technical Committee 196-ICC, RILEM SARL, Bagneux, France, 29-43.
6. Bentz, D. P., and Snyder, K. A. (1999). "Protected paste volume in concrete: Extension to internal curing using saturated lightweight fine aggregate." Cem. Concr. Res., 29(11), 1863-1867.
7. Cervera, M., Faria, R., Oliver, J., and Prato, T. (2002). "Numerical modelling of concrete curing, regarding hydration and temperature phenomena." Comput. Struct., 80(18-19), 1511-1521.
8. Cui, L., and Cahyadi, J. H. (2001). "Permeability and pore structure of OPC paste." Cem. Concr. Res., 31(2), 277-282.
9. Feyel, F. (1999). "Multiscale FE2 elastoviscoplastic analysis of composite structures." Comput. Mater. Sci., 16(1-4), 344-354.
10. Friedemann, K., Stallmach, F., and Kärger, J. (2006). "NMR diffusion and relaxation studies during cement hydration-A non-destructive approach for clarification of the mechanism of internal post curing of cementitious materials." Cem. Concr. Res., 36(5), 817-826.
11. Garboczi, E. J. (1990). "Permeability, diffusivity, and microstructural parameters: A critical review." Cem. Concr. Res., 20(4), 591-601.
12. Garboczi, E. J., and Bentz, D. P. (1996). "Modelling of the microstructure and transport properties of concrete." Constr. Build. Mater., 10(5), 293-300.
13. Gawin, D., Pesavento, F., and Schrefler, B. A. (2006a). "Hygrothermo- chemo-mechanical modelling of concrete at early ages and beyond. Part I: Hydration and hygro-thermal phenomena." Int. J. Numer. Methods Eng., 67(3), 299-331.
14. Gawin, D., Pesavento, F., and Schrefler, B. A. (2006b). "Hygrothermo- chemo-mechanical modelling of concrete at early ages and beyond. Part II: Shrinkage and creep of concrete." Int. J. Numer. Methods Eng., 67(3), 332-363.
15. Gawin, D., Pesavento, F., and Schrefler, B. A. (2007). "Modelling creep and shrinkage of concrete by means of effective stresses." Mater. Struct., 40(6), 579-591.
16. Gawin, D., Wyrzykowski, M., and Pesavento, F. (2008). "Modeling hygrothermal performance and strains of cementitious building materials maturing in variable conditions." J. Build. Phys., 31(4), 301-318.
17. Halamickova, P., Detwiler, R. J., Bentz, D. P., and Garboczi, E. J. (1995). "Water permeability and chloride ion diffusion in portland cement mortars: Relationship to sand content and critical pore diameter." Cem. Concr. Res., 25(4), 790-802.
18. Hansen, T. C. (1986). "Physical structure of hardened cement paste. A classical approach." Mater. Struct., 19(6), 423-436.
19. Hassanizadeh, M., and Gray, W. G. (1979). "General conservation equations for multi-phase systems: 1. Averaging procedure." Adv. Water Resour., 2, 131-144.
20. Henkensiefken, R., Bentz, D., Nantung, T., and Weiss, J. (2009). "Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions." Cem. Concr. Compos., 31(7), 427-437.
21. Henkensiefken, R., Nantung, T., and Weiss, J. (2011). "Saturated lightweight aggregate for internal curing in low w/c mixtures: Monitoring water movement using x-ray absorption." Strain, 47(s1), e432-e441.
22. Igarashi, S.-I., Aragane, N., and Koike, Y. (2010). "Effects of spatial structure of superabsorbent polymer particles on autogenous shrinkage behavior of cement paste." Proc., Int. RILEM Conf. on Use of Superabsorbent Polymers and Other New Additives in Concrete, O. M. Jensen, M. T. Hasholt, and S. Laustsen, eds., RILEM SARL, Bagneux, France, 137-147.
23. Jensen, O. M., and Hansen, P. F. (1996). "Autogenous deformation and change of the relative humidity in silica fume-modified cement paste." ACI Mater. J., 93(6), 539-543.
24. Jensen, O. M., and Hansen, P. F. (2001). "Water-entrained cement-based materials: I. Principles and theoretical background." Cem. Concr. Res., 31(4), 647-654.
25. Jensen, O. M., and Hansen, P. F. (2002). "Water-entrained cement-based materials: II. Experimental observations." Cem. Concr. Res., 32(6), 973-978.
26. Jensen, O. M., and Lura, P. (2006). "Techniques and materials for internal water curing of concrete." Mater. Struct., 39(9), 817-825.
27. Katz, A. J., and Thompson, A. H. (1986). "Quantitative prediction of permeability in porous rock." Phys. Rev. B, 34(11), 8179-8181.
28. Lura, P., Bentz, D. P., Lange, D. A., Kovler, K., Bentur, A., and van Breugel, K. (2006). "Measurement of water transport from saturated pumice aggregates to hardening cement paste." Mater. Struct., 39(9), 861-868.
29. Lura, P., Friedemann, K., Stallmach, F., Mönnig, S.,Wyrzykowski, M., and Esteves, L. P. (2012). "Kinetics of water migration in cement-based systems containing superabsorbent polymers." Chapter 4, Application of super absorbent polymers (SAP) in concrete construction, V. Mechtcherine, and H. W. Reinhardt, eds., RILEM State of the Art Reports, Vol. 2, Springer, Dordrecht, New York, 21-37.
30. Lura, P., and Jensen, O. M. (2007). "Measuring techniques for autogenous strain of cement paste." Mater. Struct., 40(4), 431-440.
31. Lura, P., Jensen, O. M., and Igarashi, S.-I. (2007). "Experimental observation of internal water curing of concrete." Mater. Struct., 40(2), 211-220.
32. Lura, P., Jensen, O. M., and van Breugel, K. (2003). "Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms." Cem. Concr. Res., 33(2), 223-232.
33. Maekawa, K., Chaube, R., and Kishi, T. (1999). "Modelling of concrete performance." E & FN Spon, London.
34. Mönnig, S. (2009). "Superabsorbing additions in concrete-Applications, modeling and comparison of different internal water sources." Ph.D. thesis, Univ. of Stuttgart, Germany.
35. Nestle, N., Kühn, A., Friedemann, K., Horch, C., Stallmach, F., and Herth, G. (2009). "Water balance and pore structure development in cementitious materials in internal curing with modified superabsorbent polymer studied by NMR." Microporous Mesoporous Mater., 125(1-2), 51-57.
36. Nyame, B. K., and Illston, J. M. (1980). "Capillary pore structure and permeability of hardened cement paste." 7th Int. Congress on the Chemistry of Cement Vol. 3, 37(133), 181-185.
37. Powers, T. C. (1958). "Structure and physical properties of hardened portland cement paste." J. Am. Ceram. Soc., 41(1), 1-6.
38. Trtik, P., et al. (2010). "Neutron tomography investigation of water release from superabsorbent polymers in cement paste." Int. Conf. on Material Science and 64th RILEM Annual Week, Aachen, Germany.
39. Trtik, P., et al. (2011). "Release of internal curing water from lightweight aggregates in cement paste investigated by neutron and X-ray tomography." Nucl. Instrum. Methods Phys. Res. Sect. A, 651(1), 244-249.
40. Ulm, F.-J., and Coussy, O. (1996). "Strength growth as chemo-plastic hardening in early age concrete." J. Eng. Mech., 122(12), 1123-1132.
41. Vichit-Vadakan, W., and Scherer, G. W. (2003). "Measuring permeability and stress relaxation of young cement paste by beam bending." Cem. Concr. Res., 33(12), 1925-1932.
42. Wyrzykowski, M., Lura, P., Pesavento, F., and Gawin, D. (2011). "Modeling of internal curing in maturing mortar." Cem. Concr. Res., 41(12), 1349-1356.
43. Ye, G. (2004). "Experimental study and numerical simulation of the development of the microstructure and permeability of cementitious materials." Ph.D. thesis, Delft Univ. of Technology, Netherlands.
44. Ye, G. (2005). "Percolation of capillary pores in hardening cement pastes." Cem. Concr. Res., 35(1), 167-176.
45. Ye, G., Lura, P., and van Breugel, K. (2006). "Modelling of water permeability in cementitious materials." Mater. Struct., 39(9), 877-885.
46. Zhutovsky, S., Kovler, K., and Bentur, A. (2004). "Assessment of distance of water migration in internal curing of high-strength concrete." ACI SP-220, Autogenous deformation of concrete, O. M. Jensen, D. P. Bentz, and P. Lura, eds., ACI, Farmington Hills, MI, 181-200.
47. Zienkiewicz, O. C., and Taylor, R. L. (2000). The finite element method, Vol. 1: The basis, Buttterworth-Heinemann, Oxford, UK.