Aero-thermal design and analysis of gas turbine combustion systems current status and future direction

34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit

Volumn , Issue , 1998, Pages

  Mongia, Hukam C ^a  

^a Combustion Center of Excellence ^*  (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIRCRAFT ENGINES; COMBUSTION; COMBUSTORS; DESIGN; ENGINES; FUEL SYSTEMS; GAS EMISSIONS; NASA; PROPULSION;

ANNULAR COMBUSTOR; COMBUSTION SYSTEMS; DESIGN AND DEVELOPMENT PROCESS; DEVELOPMENT AND APPLICATIONS; DRY LOW EMISSIONS; DUAL ANNULAR COMBUSTOR (DAC); GAS-TURBINE COMBUSTION; GE AIRCRAFT ENGINES;

GAS TURBINES;

EID: 84879527128     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (70)

1. International Civil Aviation Organization (ICAO), Annex 16, Volume II, 1981.
2. Gleason, C. C., and Bahr, D. W., “Experimental Clean Combustor Program Phase III-Final Report,” NASA CR-135384, June 1979.
3. Roberts, R., Florentine, A., and Greene, W., “Experimental Clean Combustor Program Phase III-Final Report,” NASA CR-135253, October 1977.
4. Burrus, D. L. et al., “Energy Efficient Engine Combustion System Component Technology Performance Report”, NASA CR-168274, July 1984.
5. Dubiel, D. J., “Energy Efficient Engine Combustion System Component Technology Performance Program”, NASA CR-179533, September 1986.
6. Joshi, N. D., Mongia, H. C., Leonard, G., Steggmaier, J. W., and Vickers, E. C., “Dry Low Emissions Combustor Development”, ASME 98-GT-
7. Mongia, Hukam C., “Recent progress in low-emissions gas turbine combustors”, ISABE 1997.
8. Danis, A. M., Pritchard, B. A., and Mongia, H. C., 1996, “Empirical and semi-empirical correlation of emissions data from modern turbopropulsion gas turbine engines”, ASME Paper 96-GT-86.
9. Lefebvre, A. H., 1984, “Fuel effects on gas turbine combustion liner temperature, pattern factor, and pollutant emissions,” J. Aircraft, v 21, n 11, pp. 887-898.
10. Mellor, A. M., 1976, “Gas turbine engine pollution,” Prog. Energy Combst. Sci., v 1, pp. 111-133.
11. Newburry, D. M., and Mellor, A. M., 1995, “Semiempirical predictions and correlations of NOx emissions from utility combustion turbines,” AIAA Paper 95-GT-070.
12. Rizk, N. K., and Mongia, H. C.; 1993, “Semianalytical correlations for NOx, CO and UHC emissions”, J. Eng. Gas Turbines and Power, July 1993, Vol. 115, pp. 603-611.
13. Pratt, D. T., 1975, “Mixing and Chemical Reaction in Continuous Combustion,” Progress in Energy and Combustion Science, Vol. 1, pp. 75-88.
14. Tonouchi, J. H. and Pratt, D. T., 1995, “A Finite-Rate Macromixing, Finite-Rate Micromixing Model for Premixed Combustion,” Paper No. 95F-167, Western States Section/The Combustion Institute, Stanford, California.
15. Tonouchi, J. H., Held T. J., and Mongia, H., 1997, “A semi-analytical finite rate two-reactor model for gas turbine combustors”, ASME Paper 97-GT-126
16. Held T. J., Marchese, A. J., andDryer, F. L., 1997, “A Semi-Empirical Reaction Mechanism for n-Heptane Oxidation and Pyrolysis,” Combustion Science and Technology, in press.
17. Held T. J., Mongia, H. C., and Tonouchi, J. H., 1998, “Application of a micro/macro-mixing two-reactor model to a single-cup low-emissions combustor,” ASME Paper 98-GT-218.
18. Reynolds, R. S., Kuhn, T. E., and Mongia, H. C., 1977, “An advanced combustor analytical design procedure and its application in the design and development testing of a premix/prevaporized combustion system,” presented at the 1977 Spring Technical Meeting of the Central States Section of the Combustion Institute, March 28-30, 1977.
19. Mongia, H. C., and Smith, K. F., “An empirical/analytical design methodology for gas turbine combustor”, AIAA Paper 78-998.
20. Mongia, H. C., Reynolds, R. S., and Srinivasan, R., 1986, “Multidimensional gas turbine combustion modeling: Applications and limitations”, AIAA J., Vol. 24, No. 6, June 1986, pp. 890-904.
21. Mongia, H. C., 1993, “Application of CFD in combustor design technology”, AGARD CP-536, pp. 12-1/12-18.
22. Sanborn, J. W., Reynolds, R. S., and Mongia, H. C., 1976, “A quasi-three-dimensional calculation procedure for predicting the performance and gaseous emissions of gas turbine combustor”, AIAA Paper 76-682.
23. Rizk, N. K., and Mongia, H. C., 1986, “Gas turbine combustor design methodology”, AIAA Paper 86-1531.
24. Rizk, N. K., and Mongia, H. C., 1990, “Threedimensional combustor performance validation with highdensity fuels”, J. Propulsion and Power, Vol. 6, No. 5, September-October, 1990, pp. 660-667.
25. Rizk, N. K., and Mongia, H. C., 1990, “Ultra-low NOx rich-lean combustion”, ASME Paper 90-GT-87.
26. Rizk, N. K., and Mongia, H. C., 1990, “Lean low NOx combustion concept evaluation”, 23rd Symp. (Int.) on Combustion, The Combustion Institute, pp. 1063-1070.
27. Rizk, N. K., and Mongia, H. C., 1991, “Threedimensional analysis of gas turbine combustors”, J. Propulsion and Power, Vol. 7, n. 3, May-June 1991, pp. 445-451.
28. Rizk, N. K., and Mongia, H. C., 1993, “Threedimensional gas turbine combustor emissions modeling”, J. Eng. Gas Turbines and Power, July 1993, Vol. 115, pp. 603-611.
29. Rizk, N. K., and Mongia, H. C.,1992, “Performance of hybrid airblast atomizers under low power conditions”, AIAA Paper 92-0463.
30. Rizk, N. K., and Mongia, H. C., 1992, “Semi-analytical fuel injector performance correlation approach”, Int. J. Turbo and Jet Engines, Vol. 9, pp. 205-213.
31. Rizk, N. K., and Mongia, H. C., 1992, “Calculation approach validation for airblast atomizers”, J. Eng. Gas Turbines and Power, April 1992, Vol. 114, pp. 386-393.
32. Rizk, N. K., Mostafa, A. A., and Mongia, H. C., 1986, “Modeling of gas turbine fuel nozzles”, Calculations of Turbulent Reactive Flows, Ed. So, Whitelaw and Mongia, ASME/AMD-Vol. 81, pp. 91-106.
33. Rizk, N. K., and Mongia, H. C., 1991, “Model for airblast atomization”, J. Propulsion and Power, Vol. 7, n. 3, May-June 1991, pp. 305-311.
34. Karki, K. C., Oechsle, V. L., and Mongia, 1992, “A computational procedure for diffuser-combustor flow interaction analysis”, J. Eng. Gas Turbines and Power, January 1992, Vol. 114, pp. 1-7.
35. Mongia, H. C., 1994, “Combustion modeling in design process: Applications and future direction”, AIAA Paper 94-0466.
36. Danis, A. M., Burrus, D. L., and Mongia, H. C., 1997, “Anchored CCD for gas turbine combustor design and data correlation”, J. Eng. Gas Turbines and Power, 1997, Vol. 119, pp. 535-545.
37. Tonouchi, J.H., 1996, “Macromixing and micromixing in lean premixed combustion,” Ph.D. Dissertation, University of Washington.
38. Valachovic, T. G., 1993, “Numerical predictions of idle power emissions from gas turbine combustors,” ASME Paper 93-GT-175.
39. Rizk, N. K., 1994, “A Quasi-3D calculation method for gas turbine combustor liner wall cooling techniques,” ASME Paper 94-GT-316.
40. Kumar, Ganesh N., Rettig, Mark, G Mongia, Hukam C., and Chauvette, Claude H., 1998, “Automated cooling design procedure for combustor walls,” AIAA Paper 98-0836.
41. Tolpadi, A. K., Prakash, C., Hura, H., and Mongia, H. C., 1998, “Advanced combustion code: Overall description, prediction of a jet diffusion flame and combustor flowfields,” ASME Paper 98-GT-
42. Nikjooy, M., Mongia, H. C., Sullivan, J. P., and Murthy, S. N. B., 1993, “Flow Interaction Experiment, Aerothermal Modeling Phase II Final Report, Volumes I and II”, NASA CR-189192, June 1993.
43. Nikjooy, M., Mongia, H. C., McDonell, V. G., and Samuelsen, G. S., 1993, “Fuel Injector-Air Swirl Characterization, Aerothermal Modeling Phase II Final Report, Volumes I and E”, NASA CR-189193, March 1993.
44. Lewis, M. H., and Smoot, L. D., 1981, “Turbulent gaseous combustion Part I: Local species concentration measurements,” Combust. & Flame, 42, pp. 183-196.
45. Launder, B. E., and Sharma, B. I., 1974, “Application of the energy dissipation model of turbulence to the calculation of flow near a spinning disc,” Letters in Heat and Mass Transfer, 1, pp. 131-138.
46. Chien, K.-Y., 1980, “Prediction of channel and boundary layer flows with a low-Reynolds-number two-equation model of turbulence,” AIAA Paper 80-0134.
47. Yang, Z., and Shih, T. H., 1993, “New time-scale based ke model for near-wall turbulence,” AIAA J., 31, pp. 1191-1198.
48. Wilcox, D. C., 1993, “Comparison of two-equation turbulence models for boundary layers with pressure gradients,” AIAA J., 31, pp. 1414-1421.
49. Gerodimos, G., and So, R. M. C., 1997, “Near-wall modeling of plane turbulent wall jets,” J. Fluids Eng., 119, pp. 304-311.
50. Gatski and Speziale (1993)
51. Nikjoo, M., and Mongia, H. C., 1998, “Assessment of advanced turbulence models for backward facing step and sudden pipe expansion for meeting Anchored CCD expectations,” AIAA Paper 98-3984.
52. Nikjoo, M., and Mongia, H. C., 1999, “Assessment of advanced turbulence models for complex swirling flows for meeting Anchored CCD expectations,” a planned 1999 publication.
53. Nikjoo, M., and Mongia, H. C., 1999, “A quasi-3D anchored film-cooled liner model,” a planned 1999 publication.
54. Kumar, Ganesh N., Moder, Jeffrey, P Mongia, Hukam C., and Prakash, Chander, 1998, “Development of a three dimensional radiative heat transfer computational methodology for aircraft engine combustors,” AIAA Paper 98-0855
55. Kumar, G. N., and Mongia, H. C., 1998, “A quasi-3D anchored radiation model for gas turbine combustors,” AIAA Paper 98-3985.
56. Liao, Y. et al, 1998, “A comprehensive model to predict simplex atomizer performance,” ASME 98-GT-441.
57. Benjamin, M. A., et al., 1998, “Film thickness, droplet size measurements and correlations for large pressureswirl atomizers,” ASME 98-GT-537.
58. Aggarwal, S., Mongia, H., and Hura, H., 1998, “Multicomponent fuel effects on the vaporization of a surrogate single component fuel droplet,” AIAA Paper 98-0157.
59. Hura, H. S., Joshi, N. D., Mongia, H. C., and Tonouchi, J., 1998, “Dry Low Emissions Premixer CCD modeling and validation,” ASME Paper 98-GT-444
60. Held T. J., and Mongia, H. C., 1998, “Application of a partially premixed laminar flamelet model to a low emissions gas turbine combustor,” ASME Paper 98-GT-217
61. Held T. J. et al., 1998, “Laminar flamelet modeling of NOx and CO emissions in a partially premixed gas turbine combustor,” AIAA Paper 98-
62. Hsiao, G. et al., 1998, “Combustion Dynamic Modeling for Premixed Combustion in Dry Low Emission Engines,” AIAA Paper 98-3380
63. Pandalai, R. P., Mongia, H. C., 1998, “Combustion instability characteristics of dry low emissions combustion systems in marine and industrial applications,” AIAA Paper 98-3379.
64. Hsiao, G., et al., 1998, “Combustion Dynamic Modeling for Liquid-Fuel Gas Turbine Engines,” AIAA Paper 98-3381
65. Goldin, G. M, and Menon, S., 1997, “A scalar PDF construction model for turbulent non-premixed combustion,” Combust. Sci. and Tech., 125, pp. 47-72, 1997.
66. Smith, T. M., and Menon, S., 1997, “One-dimensional simulations of freely propagating turbulent premixed flames,” Combust. Sci. and Tech., 128, pp. 99-130, 1997.
67. Smith, T. M., and Menon, S., 1998, “Subgrid combustion modeling for premixed turbulent reacting flows,” AIAA Paper 98-0242.
68. Pannala, S., and Menon, S., 1998, “Large eddy simulation of two-phase turbulent flows,” AIAA Paper 98-0163.
69. Menon, S., 1998, Private communication.
70. Peters, J., 1998, Private communication.