Materials for water electrolysis cells

Materials for the Hydrogen Economy

Volumn , Issue , 2007, Pages 37-59

  Lessing, Paul A ^a  

^a IDAHO NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84879209489     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (128)

1. Wendt, H. and Imarisio, G., Nine years of research and development on advanced water electrolysis. A review of the research programme of the Commission of the European Communities, J. Appl. Electrochem., 18, 1-14 (1988).
2. Wendt, H., Hofmann, H., and Plzak, V. Anode and cathode-activation, diaphragm-construction and electrolyzer configuration in advanced alkaline water electrolysis, Int. J. Hydrogen Energy, 9, 297-302 (1984).
3. Wendt, H., Hofmann, H., and Plzak, V., Materials research and development of electrocatalysts for alkaline water electrolysis, Mater. Chem. Physics, 22, 27-49 (1989).
4. Ramesh, L. et al., Electrolytic preparation and characterization of Ni-Fe-Mo-alloys: cathode materials for alkaline water electrolysis, Int. J. Energy Res., 23, 919-924 (1999).
5. Hu, W., Electrocatalytic properties of new electrocatalysts for hydrogen evolution in alkaline water electrolysis, Int. J. Hydrogen Energy, 25, 111-118 (2000).
6. Suffredini, H.B. et al., Recent developments in electrode materials for water electrolysis, Int. J. Hydrogen Energy, 25, 415-423 (2000).
7. Abdel Ghany, N.A. et al., Oxygen evolution anodes composed of anodically deposited Mn-Mo-Fe oxides for seawater electrolysis, Electrochem. Acta, 48, 21-28 (2002).
8. Wendt, H. and Hofmann, H., Cermet diaphragms and integrated electrode-diaphragm units for advanced alkaline water electrolysis, Int. J. Hydrogen Energy, 10, 375-381 (1985).
9. Kreuter, W. and Hofmann, H., Electrolysis: the important energy transformer in a world of sustainable energy, Int. J. Hydrogen Energy, 23, 661-666 (1998).
10. Rasten, E., Hagen, G., and Tunold, R., Anode catalyst materials for PEM-electrolysis, in New Materials for Electrochemical Systems IV. Extended Abstracts of the Fourth International Symposium on New Materials for Electrochemical Systems, Montreal, Quebec, Canada, July 9-13, 2001, pp. 278-280.
11. Linkous, C.A. et al. Development of new proton exchange membrane electrolytes for water electrolysis at higher temperatures, Int. J. Hydrogen Energy, 23, 525-529 (1998).
12. Weikang, H. et al., A novel cathode for alkaline water electrolysis, Int. J. Hydrogen Energy, 22, 621-623 (1997).
13. Weikang, H., Electrocatalytic properties of new electrocatalysts for hydrogen evolution in alkaline water electrolysis, Int. J. Hydrogen Energy, 25, 111-118 (2000).
14. Oi, T. and Sakaki, Y., Optimum hydrogen generation capacity and current density of the PEM-type water electrolyzer operating only during the off-peak period of electricity demand, J. Power Sources, 129, 229-237 (2004).
15. Morizonoa, T., Watanabe, K., and Ohstsuka, K., Production of hydrogen by electrolysis with proton exchange membrane (PEM) using sea water and fundamental study of hybrid system with PV-ED-FC, Mem. Fac. Eng., 31, 213-218 (2002).
16. HOGEN? Hydrogen Generators from Proton Energy Systems, 50 Inwood Rd., Rocky Hill, CT 06067, 860-571-6533, www.protonenergy.com.
17. Friedland, R.J. and Speranza, A.J., Hydrogen Production through Electrolysis, paper presented at the Proceedings of the 2001 DOE Hydrogen Program Review, NREL/CP-570-30535, Golden, CO, June 4-5, 2001.
18. Hamilton Sundstrand (A United Technologies Company), One Hamilton Rd., Windsor Locks, CT 06096, 860-654-6000.
19. Treadwell Corp., 341 Railroad St., Thomaston, CT 06787, 860-283-8251.
20. Hydrogenics Corp., 5985 McLaughlin Rd., Mississauga, Ontario, Canada, L5R 1 B8, 905-361-3660.
21. Giner Electrochemical Systems, LLC, 89 Rumford Ave., Newton, MA 02466, 781-529-0500.
22. Stucki, S. et al., PEM water electrolysers: evidence for membrane failure in 100 kW demonstration plants, J. Appl. Electrochem., 28, 1041-1049 (1998).
23. Ando, U. and Tanaka, T., Proposal for a new system for simultaneous production of hydrogen and hydrogen peroxide by water electrolysis, Int. J. Hydrogen Energy, 29, 11349-11354 (2004).
24. Foster, R. and Wright, R.L. Jr., Basic Nuclear Engineering, Boston, MA: A. Allyn and Bacon, 1968.
25. Nogami, M., Matsushita, H., Kasuga, T., and Hayakawa, T., Hydrogen gas sensing by sol-gel-derived proton-conducting glass membranes, Electrochem. Solid-State Lett., 2, 415-417 (1999).
26. Kuo, C.K., Tan, A., Sarkar, P., and Nicholson, P.S., Water partial pressure-dependent conductance and humidity effects on hydronium-ß"-Al2O3 ceramics, Solid State Ionics, 58, 311-314 (1992).
27. Schafer, G., Zyl, A.V., and Weppner, W., Process for the Production of K-or Rb-ß"-or -ß-Aluminum Oxide Ion Conductors, U.S. Patent 5,474,959, December 12, 1995.
28. Schafer, G.W., Kim, H.J., and Aldinger, F., Protonated ß"-aluminas, correlation of ionexchange rates, chemical composition and resulting lattice constants, Solid State Ionics, 97, 285-289 (1997).
29. Joshi, A.V., Liu, M., Bjorseth, A., and Renberg, L., NaOH Production from Ceramic Electrolytic Cell, U.S. Patent 5,290,405, March 1, 1994.
30. Damasceno, O., Siebert, E., Khireddine, H., and Fabry, P., Ionic exchange and selectivity of NASICON sensitive membranes, Sensors Actuators B, 8, 245-248 (1992).
31. Slade, R.C.T. and Young, K.E., Hydronium and ammonium NASICONs: investigations of conductivity and conduction mechanism, Solid State Ionics, 46, 83-88 (1991).
32. “PRONAS” available from Ceramatec, Inc., 2425 South 900 West, Salt Lake City, UT 84119, 801-978-2152.
33. Farrington, G.C. and Briant, J.L., Fast ionic transport in solids, Science, 204, 1371-1379 (1979).
34. McGeehin, P. and Hooper, A., Fast ion conduction materials [review], J. Mater. Sci., 12, 1-27 (1977).
35. Mizuno, M. and Hayashi, S., Proton dynamics in phase II of CsHSO4 studied by H-1 NMR, Solid State Ionics, 167, 317-323 (2004).
36. Kaminura, H. et al., On the mechanism of superionic conduction in the zero-dimensional hydrogen-bonded crystals M3H(XO4)2; (M = K, Rb, Cs, and X = S, Se), Physica Status Solidi C, 1, 8 (2004).
37. Park, J.-H., Possible origin of the proton conduction mechanism of CsH2PO4 crystals at high temperatures, Phys. Rev. B, 69, 54104-1-6 (2004).
38. Yaroslavtsev, A.B. and Kotov, V.Y., Proton mobility in hydrates of inorganic acids and acid salts, Russ. Chem. Bull., 54, 555-568 (2002).
39. Wu, Q.Y. and Meng, G.Y., Preparation and conductibility of solid high-proton conductor molybdovana dogermanic heteropoly acid, Mater. Res. Bull., 35, 85-91 (2000).
40. Adams, S., CDW superstructures in hydrogen molybdenum bronzes HxMoO3, J. Solid State Chem., 149, 75-87 (2000).
41. U.S. Department of Energy, A Technology Roadmap for Generation IV Nuclear Energy Systems, GIF-002-00, Nuclear Energy Research Advisory Committee and the Generation IV International Forum, December 2002.
42. Guan, J. et al., Ceramic oxygen generators with thin-film zirconia electrolytes, J. Am. Ceram. Soc., 85, 2651-2654 (2002).
43. Rambert, S. et al., Composite ceramic fuel cell fabricated by vacuum plasma spraying, J. Eur. Ceram. Soc., 19, 921-923 (1999).
44. Henne, R.H. et al., Light-Weight SOFCs for Automotive Auxiliary Power Units, paper presented at the 2nd International Conference on Fuel Cell Science, Engineering and Technology, Rochester, NY, June 14-16, 2004.
45. Wang, L.S. et al., Sputter deposition of yttria-stabilized zirconia and silver cermet electrodes for SOFC applications, Solid State Ionics, 52, 261-267 (1992).
46. Chu, W.F., Thin-and thick-film solid ionic devices, Solid State Ionics, 52, 243-248 (1992).
47. Windes, W.E. and Lessing, P.A., Plasma spray coatings for SOFC, in 2002 Fuel Cell Seminar Abstracts, Courtesy Associates, Washington, DC, 471-474, 2002.
48. Chen, T.Y. and Fung, K.Z., A and B-site substitution of the solid electrolyte LaGaO3 and LaAlO3 with the alkaline-earth oxides MgO and SrO, J. Alloys Compounds, 368, 106-115 (2004).
49. Kurumada, M., Ito, A., and Fujie, Y., Preparation of La2-xSrxGa0.8Mg0.2O3-d electrolyte for solid oxide fuel cell by citrate method using industrial raw materials, J. Ceram. Soc. Jpn., 111, 200-204 (2003).
50. Choi, S.M., et al., Oxygen ion conductivity and cell performance of La0.9Ba0.1Ga1-xMgxO3-d electrolyte, Solid State Ionics, 131, 221-228 (2000).
51. Kharton, V.V. et al., Ionic and p-type electronic conduction in LaGa(Mg, Nb)O3-d perovksites, Solid State Ionics, 128, 79-90 (2000).
52. Maffei, N. and de Silveira, G., Interfacial layers in tape cast anoe-supported doped lanthanum gallate SOFC elements, Solid State Ionics, 159, 209-216 (2003).
53. Kim, J.H. and Yoo, H.I., Partial electronic conductivity and electrolytic domain of La0.9Sr0.1Ga0.8Mg0.2O3-d, Solid State Ionics, 140, 105-113 (2001).
54. Zhang, X.G. et al., Interactions of La0.9Sf0.1Ga0.8Mg0.2O3-d electrolyte with Fe2O3, Co2O3 and NiO anode materials, Solid State Ionics, 139, 145-152 (2001).
55. Majkic, G. et al., High-temperature deformation of La0.2Sr0.8Fe0.8Cr0.2O3-d mixed ionicelectronic conductor, Solid State Ionics, 146, 393-404 (2002).
56. Kostogloudis, G.C. et al., Chemical compatibility of alternative perovskite oxide SOFC cathodes with doped lanthanum gallate solid electrolyte, Solid State Ionics, 134, 127-138 (2000).
57. Zhang, X.G. et al., Interface reactions in the NiO-SDC-LSGM system, Solid State Ionics, 133, 153-160 (2000).
58. Wang, S.Z., High performance fuel cells based on LaGaO3 electrolytes, Acta Physico-Chim. Sin., 20, 43-46 (2004).
59. Kuroda, K. et al., Characterization of solid oxide fuel cell using doped lanthanum gallate, Solid State Ionics, 132, 199-208 (2000).
60. Ma, X. et al., The power of plasma, Ceramic Industry, June 2004, pp. 25-28.
61. Pengnian, H. et al., Interfacial reaction between nickel oxide and lanthanum gallate during sintering and its effect on conductivity, J. Am. Ceram. Soc., 82, 2402-2406 (1999).
62. Maffei, N. and de Silveira, G., Interfacial layers in tape cast anode-supported doped lanthanum gallate SOFC elements, Solid State Ionics, 159, 209-216 (2003).
63. Huang, K.G. et al., Increasing power density of LSGM-based solid oxide fuel cells using new anode materials, J. Electrochem. Soc., 148, A788-A794 (2001).
64. Wang, S.Z. and Tatsumi, I., Improvement of the performance of fuel cells anodes with Sm+3 doped CeO2, Acta Physico-Chim. Sin., 19, 844-848 (2003).
65. Huang, K.Q. et al., Electrode performance test on single ceramic fuel cells using as electrolyte Sr-and Mg-doped LaGaO3, J. Electrochem. Soc., 144, 3620-3624 (1997).
66. Elangovan, S., Hartvigsen, J.J., O’Brien, J.E., Stoots, C.E., Herring, J.S., and Lessing, P.A., Operation and Analysis of Solid Oxide Fuel Cells in Steam Electrolysis Mode, paper presented at Session B07, 6th European SOFC Forum, Lucerne, Switzerland, June 28-July 2, 2004.
67. Ishihara, T. et al., Oxide ion conductivity in doubly doped PrGaO3 perovskite-type oxide, J. Electrochem. Soc., 146, 1643-1649 (1999).
68. Maricle, D.L. et al., Enhanced ceria: a low-temperature SOFC electrolyte, Solid State Ionics, 52, 173-182 (1992).
69. Kharton, V.V. et al., Ceria-based materials for solid oxide fuel cells, J. Mater. Sci., 36, 1105-1117 (2001).
70. Hidenori, Y. et al., High temperature fuel cell with ceria-yttria solid electrolyte, J. Electrochem. Soc. Solid-State Sci. Technol., 2077-2080 (1988).
71. Kirk, T.J. and Winnick, J., A hydrogen sulfide solid-oxide fuel cell using ceria-based electrolytes, J. Electrochem. Soc., 140, 3494-3496 (1993).
72. Lu, C. et al., SOFCs for direct oxidation of hydrocarbon fuels with samaria-doped ceria electrolyte, J. Electrochem. Soc., 150, A354-A358 (2003).
73. Alfa Aesar 2004 catalog prices: La2O3 (99.99%) $108/kg, Ga2O3 (99.999%) $3400/kg, CeO2 (99.9%) $84/kg, Y2O3 (99.99%) $212/kg, Gd2O3 (99.99%) $320/kg.
74. Azad, A.M., Larose, S., and Akbar, S.A., Review bismuth oxide-based solid electrolytes for fuel cells, J. Mater. Sci., 29, 4135-4151 (1994).
75. Fung, K.Z. et al., Massive transformation in the Y2Oe-Bi2O3 system, J. Am. Ceram. Soc., 77, 1638-1648 (1994).
76. Fung, K.Z. et al., Thermodynamic and kinetic considerations for Bi2O3-based electrolytes, Solid State Ionics, 52, 199-211 (1992).
77. Joshi, A.V. et al., Phase stability and oxygen transport characteristics of yttria-and niobia-stabilized bismuth oxide, J. Mater. Sci., 25, 1237-1245 (1990).
78. Abraham, F. et al., The BIMEVOX series: a new family of high performance oxide ion conductors, Solid State Ionics Diffusion React., 40/41, 934-937 (1990).
79. Simner, S.P. et al., Synthesis, densification, and conductivity characteristics of BICUVOX oxygen-ion-conducting ceramics, J. Am. Ceram. Soc., 80, 2563-2568 (1997).
80. Yaremchenko, A.A. et al., Physicochemical and transport properties of Bicuvox-based ceramics, J. Electroceram., 4, 233-242 (2000).
81. Pasciak, G. et al., Solid electrolytes for gas sensors and fuel cells applications, J. Eur. Ceram. Soc., 21, 1867-1870 (2001).
82. Priovano, C. et al., Characterisation of the electrode-electrolyte BIMEVOX system for oxygen separation. Part I. In situ synchrotron study, Solid State Ionics, 159, 167-179 (2003).
83. Kharton, V.V. et al., Ceria-based materials for solid oxide fuel cells, J. Mater. Sci., 36, 1105-1117 (2001).
84. Setoguchi, T. et al., Effects of anode materials and fuel on anodic reaction of solid oxide fuel-cells, J. Electrochem. Soc., 139, 2875-2880 (1993).
85. Jiang, S.P. and Chan, S.H., A review of anode materials development in solid oxide fuel cells, J. Mater. Sci., 39, 4405-4439 (2004).
86. Hartvigsen, J., Elangovan, S., and Khandkar, A., A Comparison of Proton and Oxygen Ion Conducting Electrolytes for Fuel Cell Applications, paper presented at AIChE Annual Meeting Fuel Cells for Utility Applications and Transportation: Engineering & Design II, St. Louis, MO, November 11, 1993.
87. Iwahara, H. et al., High temperature type proton conductor based on SrCeO3 and its application to solid electrolyte fuel cells, Solid State Ionics, 9/10, 1021-1026 (1983).
88. Iwahara, H., High temperature-type proton conductive solid oxide fuel cells using various fuels, J. Appl. Electrochem., 16, 663-668 (1986).
89. Iwahara, H., Oxide-ionic and protonic conductors based on perovskite-type oxides and their possible applications, Solid State Ionics, 52, 99-104 (1992).
90. Iwahara, H. et al., Proton conduction in sintered oxides based on BaCeO3, J. Electrochem. Soc. Solid-State Sci. Technol., 135, 529-533 (1988).
91. Chen, F.L. et al., Preparation of Nd-doped BaCeO3 proton-conducting ceramic and its electrical properties in different atmospheres, J. Eur. Ceram. Soc., 18, 1389-1395 (1998).
92. Bhide, S.V. and Virkar, A.V., Stability of BaCeO3-based proton conductors in watercontaining atmospheres, J. Electrochem. Soc., 146, 2038-2044 (1999).
93. Kreuer, K.D., Aspects of the formation and mobility of protonic charge carriers and the stability of perovskite-type oxides, Solid State Ionics, 125, 285-302 (1999).
94. Kreuer, K.D. et al., Proton conducting alkaline earth zirconates and titanates for high drain electrochemical applications, Solid State Ionics, 145, 295-306 (2001).
95. Kreuer, K.D., Proton-conducting oxides, Annu. Rev. Mater. Res., 33, 333-359 (2003).
96. Hassan, D. et al., Proton-conducting ceramics as electrode/electrolyte materials for SOFC’s. Part I. Preparation, mechanical and thermal properties of sintered bodies, J. Eur. Ceram. Soc., 23, 221-228 (2003).
97. Fehringer, G. et al., Proton-conducting ceramics as electrode/electrolyte: materials for SOFCs: preparation, mechanical and thermal-mechanical properties of thermal sprayed coatings, material combination and stacks, J. Eur. Ceram. Soc., 24, 705-715 (2004).
98. Kreuer, K.D., Proton-conducting oxides, Annu. Rev. Mater. Res., 33, 333-359 (2003).
99. Kobayashi, T. et al., Study on current efficiency of steam electrolysis using a partial protonic conductor SrZr0.9Yb0.1O3-d, Solid State Ionics, 138, 243-251 (2001).
100. Jian, S.P. et al., A comparative investigation of chromium deposition at air electrodes of solid oxide fuel cells, J. Eur. Ceram. Soc., 22, 361-373 (2002).
101. Kofstad, P. and Bredesen, R., High temperature corrosion in SOFC environments, Solid State Ionics, 52, 69-75 (1992).
102. Yang, S.G. et al., Solid oxide fuel cells: materials for the bipolar plates are under development to reduce costs while maintaining performance and durability, Adv. Mater. Processes, 161, 34 (2003).
103. Larring, Y. and Norby, T., Spinel and perovskite functional layers between Plansee metallic interconnect (Cr-5 wt% Fe-1 wt% Y2O3) in ceramic (La0.85Sr0.15)0.91MnO3 cathode materials for solid oxide fuel cells, J. Electrochem. Soc., 147, 3251-3256 (2000).
104. Kung, S.C. et al., Performance of Metallic Interconnect in Solid-Oxide Fuel Cells, paper presented at the 2000 Fuel Cell Seminar, Portland, OR, October 30-November 2, 2000.
105. Horita, T. et al., Evaluation of Fe-Cr alloys as interconnects for reduced operation temperature SOFCs, J. Electrochem. Soc., 150, A243-A248 (2003).
106. Windes, W.E. and Lessing, P.A., Fabrication Methods of a Leaky SOFC Design, paper presented at the Eighth International Symposium of Solid Oxide Fuel Cells (SOFC VIII), 203rd Meeting of the Electrochemical Society, Paris, April 27-May 2, 2003.
107. Windes, W.E. and Lessing, P.A., A Low CTE Intermetallic Bipolar Plate, paper presented at the Eighth International Symposium of Solid Oxide Fuel Cells (SOFC VIII), 203rd Meeting of the Electrochemical Society, Paris, April 27-May 2, 2003.
108. Hartvigsen, J.J. et al., Via Filled Interconnect for Solid Oxide Fuel Cells, U.S. Patent 6,183,897 B1, February 6, 2001.
109. Badding, M.E. et al., High Performance Solid Electrolyte Fuel Cells, U.S. Patent Application 20010044041, November 22, 2001.
110. Meulenberg, W.A. et al., Improved contacting by the use of silver in solid oxide fuel cells up to an operating temperature of 800°C, J. Mater. Sci., 36, 3189-3195 (2001).
111. Wang, L.S. et al., Sputter deposition of yttria-stabilized zirconia and silver cermet electrodes for SOFC applications, Solid State Ionics, 52, 261-267 (1992).
112. Meulenberg, W.A. et al., Oxidation behaviour of ferrous alloys used as interconnecting material in solid oxide fuel cells, J. Mater. Sci., 38, 507-513 (2003).
113. Subbarao, E. and Maiti, H.S., Solid electrolytes with oxygen ion conduction, Solid State Ionics, 11, 317-338 (1984).
114. Kilner, J.A. and Brook, R.J., A study of oxygen ion conductivity in doped non-stoichiometric oxides, Solid State Ionics, 6, 237-252 (1982).
115. USGS, Year 2000 data: Sc2O3 (99.99% pure) $3,000/kg, Sc2O3 (99.9% pure) $700/kg; Y2O3 (99.99% pure) $ 200/kg.
116. The system Y2O3-Sc2O3-ZrO2: phase stability and ionic conductivity studies, J. Eur. Ceram. Soc., 7, 197-206 (1991).
117. Singhal, S.C., Science and technology of solid-oxide fuel cells, MRS Bull., 25, 16-21 (2000).
118. Anderson, H.U. and Nasrallah, M.M., Characterization of Oxide for Electrical Delivery Systems, paper presented at the EPRI/GRI Fuel Cell Workshop on Fuel Cell Technology Research and Development, New Orleans, April 13-14, 1993.
119. Misuyasu, H. et al., Microscopic analysis of lanthanum strontium manganite yttriastabilized zirconia interface, Solid State Ionics, 100, 11-15 (1997).
120. Donitz, W. and Erdle, E., High-temperature electrolysis of water vapor: status of development and perspectives for application, Int. J. Hydrogen Energy, 10, 291-295 (1985).
121. Hino, R. and Miyamoto, Y., Hydrogen production by high-temperature electrolysis of steam, in High Temperature Applications of Nuclear Energy, International Atomic Energy Agency, 1994, pp. 119-124.
122. Herring, J.S., Anderson, R., Lessing, P.A., O’Brien, J.E., Stoots, C.M., Hartvigsen, J.J., and Elangovan, S., Hydrogen Production through High-Temperature Electrolysis in a Solid Oxide Cell, paper presented at the National Hydrogen Association 15th Annual Conference, Los Angeles, April 26-29, 2004.
123. O’Brien, J.E., Stoots, C.M., Herring, J.S., and Lessing, P.A., Characterization of Solid-Oxide Electrolysis Cells for Hydrogen Production via High-Temperature Steam Electrolysis, Paper 2474, paper presented at the 2nd International Conference on Fuel Cell Science, Engineering, and Technology, Rochester, NY, June 14-16, 2004.
124. Herring, J.S., O’Brien, J.E. Stoots, C.M,. Lessing, P.A, Anderson, R.P., Hartvigsen, J.J., and Elangovan, S., Hydrogen Production from Nuclear Energy via High-Temperature Electrolysis, Paper 4322, pape presented at the 2004 International Conference on Advances in Nuclear Power Plants (ICAPP’04), Pittsburgh, PA, June 13-17, 2004.
125. Herring, J.S., O’Brien, J.E., Stoots, C.M., Lessing, P.A., Anderson, R.P., Hartvigsen, J.J., and Elangovan, S., Hydrogen Production through High-Temperature Electrolysis Using Nuclear Power, paper presented at the AIChE Spring National Meeting, New Orleans, April 25-29, 2004.
126. Very High Temperature Reactor (VHTR) Survey of Materials Research and Development Needs to Support Early Deployment, INL/EXT-03-004-141, January 31, 2003.
127. Design Features and Technology Uncertainties for the Next Generation Nuclear Plant, INEEL/EXT-04-01816, Independent Technology Review Group, June 30, 2004.
128. Ion, S. et al., Pebble Bed Modular Reactor: The First Generation IV Reactor to Be Constructed, paper presented at the World Nuclear Association Annual Symposium, London, September 3-5.