Antistatic-reinforced biocomposites of polyamide-6 and polyaniline-coated curauá fibers prepared on a pilot plant scale

Polymer Composites

Volumn 34, Issue 7, 2013, Pages 1081-1090

  Araujo, J R ^a   Adamo, C B ^b   Costa E Silva, M V ^a   De Paoli, M A ^b  

^a INSTITUTO NACIONAL DE METROLOGIA   (Brazil)

^b UNIVERSITY OF CAMPINAS   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

ANTISTATIC DISSIPATION; ANTISTATIC MATERIALS; INTERFACIAL ADHESIONS; INTRINSICALLY CONDUCTING POLYMER; LARGE SCALE PRODUCTIONS; PILOT PLANT SCALE; RHEOLOGICAL PROPERTY; SCANNING ELECTRONIC MICROSCOPY;

ELECTRIC PROPERTIES; EXTRUSION; FIBERS; INFRARED SPECTROSCOPY; INJECTION MOLDING; MECHANICAL PROPERTIES; PILOT PLANTS; POLYANILINE; REINFORCEMENT; TENSILE STRENGTH;

REINFORCED PLASTICS;

EID: 84879201420     PISSN: 02728397     EISSN: 15480569     Source Type: Journal    
DOI: 10.1002/pc.22516     Document Type: Article

References (50)

1. X. Dirand, B. Hilaire, J.P. Soulier, and, M. Nardin, Comp. Sci. Technol., 56, 533 (1996).
2. H.A. Rijsdijk, M. Contant, and, A.A.J.M. Peijs, Comp. Sci. Technol., 48, 161 (1993).
3. J.Z. Liang, and, Q.Q. Yang, J. Appl. Polym. Sci., 3, 295 (2009).
4. C. Li, T. Liang, and, W. Lu, C. Comp. Sci. Technol. 64, 2089 (2004).
5. P.A. Santos, M.A.S. Spinacé, K.K.G. Fermoselli, and, M-A. De Paoli, Compos. A Appl. S., 28, 2404 (2007).
6. J.R. Araujo, B. Mano, G.M. Teixeira, M.A.S. Spinacé, and, M.-A. De Paoli, Comp. Sci. Technol., 70, 1637 (2010).
7. K.C. Yong, P.J.S. Foot, H. Morgan, S. Cook, and, A.J. Tinker, Eur. Polym. J., 42, 1716 (2006).
8. D.S. Vicentini, G.M.O. Barra, J.R. Bertolino, and, A.T.N. Pires, Eur. Polym. J., 43, 4565 (2007).
9. N. Plesu, I. Grozav, S. Lliescu, and, G. Ilia, Synth. Met., 159, 501 (2009).
10. F. Tomczak, K.G. Satyanarayana, and, T.H.D. Sydenstricker, Compos. A Appl. S., 38, 2227 (2007).
11. C. Borsoi, L.C. Scienza, and, A.J. Zattera, J. Appl. Polym. Sci., 128, 653 (2013).
12. E. Frollini, N. Bartolucci, L. Sisti, and, A. Celli, Ind. Crop. Prod., 45, 160 (2013).
13. J.H.S. Almeida Jr., H.L. Ornaghi Jr., S.C. Amico, and, F.D.R. Amado, Mater. Des., 42, 111 (2012).
14. D.O. Castro, A. Ruvolo-Filho, and, E. Frollini, Polym. Test., 31, 880 (2012).
15. H.L. Ornaghi Jr., H.S.P. Silva, A.J. Zattera, and, S.C. Amico, Mater. Sci. Eng., 528, 7285 (2011).
16. L.V. Silva, J.H.S. Almeida Jr., C.C. Angrizani, and, S.C. Amico, J. Reinf. Plast. Comp., 32, 197 (2013).
17. M.A.S. Spinacé, L.G. Janeiro, F.C. Bernardino, T. A. Grossi, and, M.-A. De Paoli, Polímeros, 21, 168 (2011).
18. R. Campomanes, E. Bittencourt, and, J.S. Campos, Synth. Met., 102, 1230 (1999).
19. M. Pomerantz, J.J. Tseng, and, H. Zhu, Synth. Met., 41, 825 (1991).
20. P.P. Sengupta, P. Kar, and, B. Adhikari, Thin Solid Films, 517, 3770 (2009).
21. S. Ray, A.J. Easteal, R.P. Cooney, and, N.R. Edmonds, Mater. Chem. Phys., 113, 829 (2009).
22. A.R.A. Schettini, R.C.D. Peres, and, B.G. Soares, Synth. Met., 159, 1491 (2009).
23. M.-A. De Paoli, R.J. Waltman, A.R. Diaz, and, J. Bargon, J. Polym. Sci. Polym. Chem., 23, 1687 (1985).
24. L.A. Utracki, and, B.D. Favis, Polymer Alloys and Blends: Handbook of Polymer Science and Technology "Composites and Specially Applications, Vol. 4," Marcel Dekker, Inc., New York, 183 (1989).
25. F.G. Souza Jr., P.H.S. Picciani, E.V. Rocha, and, G.E. Oliveira, Polímeros, 20, 377 (2010).
26. F.G. Souza Jr., L.O. Paiva, R.C. Michel, and, G.E. Oliveira, Polímeros, 21, 39 (2011).
27. F.G. Souza Jr., G.E. Oliveira, C.H.M. Rodrigues, B.G. Soares, M. Nele, and, J.C. Pinto, Macromol. Mater. Eng., 294, 484 (2009).
28. P.A. Kumar, S. Chakraborty, and, M. Ray, Chem. Eng. J., 141, 130 (2008).
29. R. Anbarasan, G.P. Kalaignan, T. Vasudevan, and, A. Gopalan, Int. J. Polym. Anal. Character., 5, 247 (1999).
30. J.R. Araujo, C.B. Adamo, and, M.-A. De Paoli, Chem. Eng. J., 174, 425 (2011).
31. P. Sukitpaneenit, T. Thanpitcha, A. Sirivat, C. Weder, and, R. Rujiravanit, J. Appl. Polym. Sci., 106, 4039 (2007).
32. P.C. Ramamurthy, W.R. Harrel, R.V. Gregory, B. Sadanadan, and, A.M. Rao, Mater. Res. Soc. Symp. Proc., 791, Q10.3.1 (2004).
33. M.C. Gutierrez, M.-A. De Paoli, and, M.I. Felisberti, Compos. Appl. S., 43, 1338 (2012).
34. O.A. Araújo, and, M.-A. De Paoli, Synth. Met., 159, 1968 (2009).
35. J.P. Mesquita, C.L. Donnici, I.F. Teixeira, and, F.V. Pereira, Carbohydr. Polym., 90, 210 (2012).
36. M.R. Nabid, M. Golbabaee, A.B. Moghaddam, R. Dinarvand, and, R. Sedghi, Int. J. Electrochem. Sci., 3, 1117 (2008).
37. Q. Tang, J. Wu, H. Sun, J. Lin, S. Fan, and, D. Hu, Carbohydr. Polym., 74, 215 (2008).
38. J.K. Avlyanov, Y. Min, A.G. MacDiarmid, and, A.J. Epstein, Synth. Met., 72, 65 (1995).
39. B. Mano, J.R. Araujo, M.A.S. Spinacé, and, M-A. De Paoli, Compos. Sci. Technol., 70, 29 (2010).
40. R. Von Turkovich, and, L. Erwin, Polym. Eng. Sci., 23, 743 (1983).
41. S. Iannace, R. Ali, and, L. Nicolais, J. Appl. Polym. Sci., 79, 1084 (2001).
42. J.D. Sudha, S. Sivakala, R. Prasanth, V.L. Reena, and, P. Radhakrishnan Nair, Comp. Sci. Technol., 52, 718 (2011).
43. G.M.O. Barra, R.R. Martins, K.A. Kafer, R. Paniago, C.T. Vasquez, and, A.T.N. Pires, Polym. Test. 27, 886 (2008).
44. R.S. Benson, M.W. Lee, and, D.W. Grummitt, Nanostruct. Mater., 6, 83 (1995).
45. H. Frisk, and, D. Schwendemann, Kunststoffe Plast. Eur., 4, 76 (2004).
46. G. Blaise, J. Electrostat., 50, 69 (2001).
47. L.G. Pedroni, J.R. Araujo, M.I. Felisberti, and, A.F. Nogueira, Compos. Sci. Technol., 72, 1487 (2012).
48. A. Puzari, P. Rannou, S. Martins, A. Geyer, I. Schuster, A. Pron, and, S. Palaniappan, Synth. Met., 157, 611 (2007).
49. W. Pan, S.L. Yang, G. Li, and, J.M. Jiang, Eur. Polym. J., 41, 2127 (2005).
50. P.C. Rodrigues, M. Muraro, C.M. Garcia, G.P. Souza, M. Abbate, W.H. Schreiner, and, M.A.B. Gomes, Eur. Polym. J., 37, 2217 (2001).