Novel, synergistic composites of polypropylene and rice husk ash: Sustainable resource hybrids prepared by solid-state shear pulverization

Polymer Composites

Volumn 34, Issue 7, 2013, Pages 1211-1221

  Iyer, Krishnan A ^a   Torkelson, John M ^a  

^a Northwestern University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ELONGATION AT BREAK; HIGH SHEAR RATE; MELT PROCESSING; POWER PRODUCTION; SOLID-STATE SHEAR PULVERIZATIONS; SUSTAINABLE RESOURCES; TWIN SCREW EXTRUSION; YOUNG'S MODULUS;

COMMINUTION; DISPERSIONS; ELASTIC MODULI; INCINERATION; SILICA; YIELD STRESS;

POLYPROPYLENES;

EID: 84879198674     PISSN: 02728397     EISSN: 15480569     Source Type: Journal    
DOI: 10.1002/pc.22534     Document Type: Article

References (73)

1. E.P. Giannelis, Adv Mater., 8, 29 (1996).
2. M. Alexandre, and, P. Dubois, Mater. Sci. Eng. R, 28, 1 (2000).
3. S. Kumar, H. Doshi, M. Srinivasarao, J.O. Park, and, D.A. Schiraldi, Polymer, 43, 1701 (2002).
4. O. Breuer, and, U. Sundararaj, Polym. Compos., 25, 630 (2004).
5. S. Stankovich, D.A. Dikin, G.H.B. Dommett, K.M. Kohlhaas, E.J. Zimney, E.A. Stach, R.D. Piner, S.T. Nguyen, and, R.S. Ruoff, Nature, 442, 282 (2006).
6. S.C. Tjong, Mater. Sci. Eng. R, 53, 73 (2006).
7. P. Rittigstein, and, J.M. Torkelson, J. Polym. Sci. Part B: Polym. Phys., 44, 2935 (2006).
8. F. Hussain, M. Hojjati, M. Okamoto, and, R.E. Gorga, J. Compos. Mater., 40, 1511 (2006).
9. S.V. Joshi, L.T. Drzal, A.K. Mohanty, and, S. Arora, Compos. Part A, 35, 371 (2004).
10. J.Y. Kim, S.I. Han, and, S. Hong, Polymer, 49, 3335 (2008).
11. D.R. Paul, and, L.M. Robeson, Polymer, 49, 3187 (2008).
12. J. Masuda, and, J.M. Torkelson, Macromolecules, 41, 5974 (2008).
13. H. Kim, A.A. Abdala, and, C.W. Macosko, Macromolecules, 43, 6515 (2010).
14. Z. Spitalsky, D. Tasis, K. Papegelis, and, C. Galiotis, Prog. Polym. Sci., 35, 357 (2010).
15. O.C. Compton, S. Kim, C. Pierre, J.M. Torkelson, and, S.T. Nguyen, Adv. Mater., 22, 4759 (2010).
16. A. Usuki, Y. Kojima, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi, and, O. Kamigaito, J. Mater. Res., 8, 1179 (1993).
17. X. Jiang, and, L.T. Drzal, Polym. Compos., 33, 636 (2012).
18. C. Chen, M. Bortner, J.P. Quigley, and, D.G. Baird, Polym. Compos., 33, 1033 (2012).
19. S.C. Jana, and, S. Jain, Polymer, 42, 6897 (2001).
20. K. Wakabayashi, C. Pierre, D.A. Dikin, R.S. Ruoff, T. Ramanathan, L.C. Brinson, and, J.M. Torkelson, Macromolecules, 41, 1905 (2008).
21. K. Wakabayashi, P.J. Brunner, J. Masuda, S.A. Hewlett, and, J.M. Torkelson, Polymer, 51, 5525 (2010).
22. R. Sengupta, M. Bhattacharya, S. Bandyopadhyay, and, A.K. Bhowmick, Prog. Polym. Sci., 36, 638 (2011).
23. K. Chrissopoulou, and, S.H. Anastasiadis, Eur. Polym. J., 47, 600 (2011).
24. F.P. La Mantia, and, M. Morreale, Compos. Part A, 42, 579 (2011).
25. H.S. Yang, H.J. Kim, J. Son, H.J. Park, B.J. Lee, and, T.S. Hwang, Compos. Struct., 63, 305 (2004).
26. M.N. Ichazo, C. Albano, J. Gonzalez, R. Perera, and, M.V. Candal, Compos. Struct., 54, 207 (2001).
27. A. Najafi, and, S.K. Najafi, Polym. Compos., 30, 1570 (2009).
28. W. Helbert, J.Y. Cavaille, and, A. Dufresne, Polym. Compos., 17, 604 (1996).
29. R. Gauthier, C. Joly, A.C. Coupas, H. Gauthier, and, M. Escoubes, Polym. Compos., 19, 287 (1998).
30. D.N. Saheb, and, J.P. Jog, Adv. Polym. Technol., 18, 351 (1999).
31. H.G.B. Premlal, H. Ismail, and, A. Baharin, Polym. Test., 21, 833 (2002).
32. R. Karnani, M. Krishnan, and, R. Narayan, Polym. Eng. Sci., 37, 476 (1997).
33. J. George, M.S. Sreekala, and, S. Thomas, Polym. Eng. Sci., 41, 1471 (2001).
34. S. Mishra, A.K. Mohanty, L.T. Drzal, M. Misra, S. Parija, S.K. Nayak, and, S.S. Tripathy, Compos. Sci. Tech., 63, 1377 (2003).
35. N. Sutivisedsak, H.N. Cheng, C.S. Burks, J.A. Johnson, J.P. Siegel, E.L. Civerolo, and, A. Biswas, J. Polym. Environ., 20, 305 (2012).
36. S.D. Genieva, S.C. Turmanova, and, L.T. Vlaev, Cellulose Fibers: Bio- and Nano- Polymer Composites, Springer Berlin Heidelberg, Berlin, 345 (2011).
37. R.M. Ferraro, A. Nanni, R.K. Vempati, and, F. Matta, J. Mater. Civ. Eng., 22, 1078 (2010).
38. Z.Y. Zhang, A.M. Gonzalez, E.G.R. Davies, and, Y. Liu, Water Environ. Res., 84, 1386 (2012).
39. M.Y.A. Fuad, M. Jamaludin, Z.A.M. Ishak, and, A.K.M. Omar, Int. J. Polym. Mater., 19, 75 (1993).
40. S. Turmanova, S. Geneiva, and, L. Vlaev, Int. J. Chem., 4, 62 (2012).
41. D.S. Chaudhary, M.C. Jollands, and, F. Cser, Adv. Polym. Tech., 23, 147 (2004).
42. P. Sae-Oui, C. Rakdee, and, P. Thanmathorn, J. Appl. Polym. Sci., 83, 2485 (2002).
43. S.D. Nagrale, H. Hajare, and, P.R. Modak, Int. J. Eng. Res. Appl., 2, 1 (2012).
44. M.R. Gidde, and, A.P. Jivani, in Proceedings of International Conference on Cleaner Technologies and Environmental Management PEC, 586 (2007).
45. S. Siriwardena, H. Ismail, and, U.S. Ishiaku, Polym. Int., 50, 707 (2001).
46. Z.A.M. Ishak, and, A.A. Bakar, Eur. Polym. J., 31, 259 (1995).
47. H. Ismail, M.N. Nasaruddin, and, U.S. Ishiaku, Polym. Test., 18, 287 (1999).
48. H.M. Da Costa, L.L.Y. Visconte, R.C.R. Nunes, and, C.R.G. Furtado, J. Appl. Polym. Sci., 83, 2331 (2002).
49. M.Y.A. Fuad, Z. Ismail, M.S. Mansor, Z.A.M. Ishak, and, A.K.M. Omar, Polym. J., 27, 1002 (1995).
50. M.Y.A. Fuad, Z. Ismail, Z.A.M. Ishak, and, A.K.M. Omar, Eur. Polym. J., 31, 885 (1995).
51. M.Y.A. Fuad, J. Mustafah, M.S. Mansor, Z.A.M. Ishak, and, A.K.M. Omar, Polym. Int., 38, 33 (1995).
52. D.S. Chaudhary, and, M.C. Jollands, Polym. Polym. Compos., 13, 627 (2005).
53. D.S. Chaudhary, M.C. Jollands, and, F. Cser, Polym. Polym. Compos., 12, 383 (2004).
54. S. Siriwardena, H. Ismail, and, U.S. Ishiaku, J. Reinf. Plast. Compos., 22, 1645 (2003).
55. M.Y.A. Fuad, R. Shukor, Z.A.M. Ishak, and, A.K.M. Omar, Plast. Rubber Compos., 21, 225 (1995).
56. S. Turmanova, A. Dimitrova, and, L. Vlaev, Polym.-Plast. Tech. Eng., 47, 809 (2008).
57. S. Eksambekar, Silica Extracted from Rice Husk for Greener Tyres, The Economist, January 5, (2013).
58. K. Khait, and, J.M. Torkelson, Polym.-Plast. Technol. Eng., 38, 445 (1999).
59. K. Kasimatis, and, J.M. Torkelson, PMSE Prepr., 91, 173 (2004).
60. A.M. Walker, Y. Tao, and, J.M. Torkelson, Polymer, 48, 1066 (2007).
61. Y. Tao, J. Kim, and, J.M. Torkelson, Polymer, 47, 6773 (2006).
62. N. Furgiuele, A.H. Lebovitz, K. Khait, and, J.M. Torkelson, Macromolecules, 33, 225 (2000).
63. A.H. Lebovitz, K. Khait, and, J.M. Torkelson, Macromolecules, 35, 8672 (2002).
64. A.H. Lebovitz, K. Khait, and, J.M. Torkelson, Macromolecules, 35, 9716 (2002).
65. P.J. Brunner, J.T. Clark, J.M. Torkelson, and, K. Wakabayashi, Polym. Eng. Sci., 52, 1555 (2012).
66. J.M. Diop, and, J.M. Torkelson, ANTEC (SPE), 70 (1), 793 (2012); Submitted.
67. X. Jiang, and, L.T. Drzal, J. Appl. Polym. Sci., 124, 525 (2012).
68. M. Maric, and, C.W. Macosko, Polym. Eng. Sci., 41, 118 (2001).
69. H.S. Bu, S.Z.D. Cheng, and, B. Wunderlich, Makromol. Chem. Rapid Commun., 9, 75 (1988).
70. Y. Liu, and, M. Kontopoulou, Polymer, 47, 7731-7739 (2006).
71. W.P. Cox, and, E.H. Merz, J. Polym. Sci., 23, 619 (1958).
72. R. Krishnamoorti, and, E.P. Giannelis, Macromolecules, 30, 4097 (1997).
73. G. Galgali, C. Ramesh, and, A. Lele, Macromolecules, 34, 852 (2001).