Geopolymers based on spent catalyst residue from a fluid catalytic cracking (FCC) process

Fuel

Volumn 109, Issue , 2013, Pages 493-502

  Rodríguez, Erich D ^a,b   Bernal, Susan A ^b,c   Provis, John L ^b,c   Gehman, John D ^d   Monzó, José M ^a   Payá, Jordi ^a   Borrachero, M Victoria ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

^b UNIVERSITY OF MELBOURNE   (Australia)

^c UNIVERSITY OF SHEFFIELD   (United Kingdom)

^d UNIVERSITY OF MELBOURNE   (Australia)

Author keywords

Catalyst residue; Fluid catalytic cracking; Geopolymer; Zeolites

Indexed keywords

BINDERS; BINS; CATALYSTS; CATALYTIC CRACKING; CHEMICAL ACTIVATION; CRACKING (CHEMICAL); CRACKS; GEOPOLYMERS; INORGANIC POLYMERS; ZEOLITES;

ACTIVATION CONDITIONS; ALUMINOSILICATE BINDERS; CATALYST RESIDUES; DEGREE OF CROSS-LINKING; FLUID CATALYTIC CRACKING(FCC); GEOPOLYMER; SPENT FCC CATALYSTS; STRUCTURAL CHARACTERISTICS;

FLUID CATALYTIC CRACKING;

EID: 84879106139     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2013.02.053     Document Type: Article

References (69)

1. EIA Independent Statistics & Analysis. US Energy Information Administration. Short-term energy, outlook. September 2012.
2. Speight JG. The chemistry and technology of petroleum. 4th edition. New York: CRC Press. Taylor & Francis Group, LLC; 2006.
3. Marafi M, Stanislaus A, Furimsky E. Handbook of spent hydroprocessing catalysts: regeneration, rejuvenation, reclamation, environment and safety. 1st ed. The Netherlands: Elsevier: Amsterdam; 2010.
4. Schreiber R, Yonley G. The use of spent catalyst as a raw material substitute in cement manufacturing. ACS Petrol Chem Div 1993;38:97-9 [Preprints].
5. Lin J, Tarn J, Yu D, Hsiao L. Utilization of ROC spent catalyst on asphalt concrete. In: International Conference on Industrial Waste Minimization. Taiwan; 1995, p. 667-74.
6. Escardino A, Amoros J, Moreno A, Sanchez E. Utilizing the used catalyst from refinery FCC units as a substitute for kaolin in formulating ceramic frits. Waste Manag Res 1995;13:569-78.
7. Basaldellaa EI, Torres RM, Conconi MS. Conversion of exhausted fluid cracking catalysts into zeolites by alkaline fusion. Appl Clay Sci 2009;42:611-4.
8. Al-Sheeha H, Marafi M, Stanislaus A. Reclamation of alumina as boehmite from an alumina-supported spent catalyst. Int J Miner Process 2008;88:59-64.
9. Sun DD. Stabilization treatment for reutilization of spent refinery catalyst into value-added product. Energy Source 2003;25:607-15. (Pubitemid 41747261)
10. Stonys R, Pundiene I, Antonovic V, Goberis S, Aleknevicius M. The effect of waste oil-cracking catalyst on the properties of MCC-type castable. Mater Sci-Medzg 2008;14:59-62.
11. Pacewska B, Wilińska I, Kubissa J. Use of spent catalyst from catalytic cracking in fluidized bed as a new concrete additive. Thermochim Acta 1998;322:175-81. (Pubitemid 128351291)
12. Payá J, Monzó J, Borrachero MV. Fluid catalytic cracking catalyst residue (FC3R): an excellent mineral by-product for improving early-strength development of cement mixtures. Cem Concr Res 1999;29:1773-9. (Pubitemid 30531589)
13. Chen H-L, Tseng Y-S, Hsu K-C. Spent FCC catalyst as a pozzolanic material for high-performance mortars. Cem Concr Compos 2004;26:657-64.
14. Dweck J, Pinto CA, Buchler P. Study of a Brasilian spent catalyst as cement aggregate by thermal and mechanical analysis. J Therm Anal Calorim 2008;92:121-7.
15. García de Lomas M, Sánchez de Rojas M, Frías M. Pozzolanic reaction of a spent fluid catalytic cracking catalyst in FCC-cement mortars. J Therm Anal Calorim 2007;90:443-7. (Pubitemid 350230148)
16. Glasser FP, Zornoza E, Garcés P, Payá J, Brew DRM. Pozzolanic activity of a spent fluid catalytic cracking catalyst residue. Adv Cem Res 2011;23:105-11.
17. Bayraktar O. Bioleaching of nickel from equilibrium fluid catalytic cracking catalysts. World J Microb Biot 2005;21:661-5. (Pubitemid 41073906)
18. Pacewska B, Wilinska I, Bukowska M, Blonkowski G, Nocun-Wczelik W. An attempt to improve the pozzolanic activity of waste aluminosilicate catalyst. J Therm Anal Calorim 2004;77:133-42.
19. Hsu K-C, Tseng J-S, Ku F-F, Su N. Oil cracking waste catalyst as an active pozzolanic material for superplasticized mortars. Cem Concr Res 2001;31:1815-20. (Pubitemid 34006909)
20. Payá J, Monzó J, Borrachero MV, Velázques S. Chemical activation of pozzolanic reaction of fluid catalytic cracking catalyst residue in lime pastes. Adv Cem Res 2004;16:123-30.
21. Roy DM. Alkali-activated cements Opportunities and challenges. Cem Concr Res 1999;29:249-54.
22. van Deventer JSJ, Provis JL, Duxson P. Technical and commercial progress in the adoption of geopolymer cement. Miner Eng 2012;29:89-104.
23. Provis JL, van Deventer JSJ. Geopolymers: structure, processing, properties and industrial applications. Cambridge: Woodhead Publishing; 2009.
24. Duxson P, Provis JL. Designing precursors for geopolymer cements. J Am Ceram Soc 2008;91:3864-9.
25. Tashima MM, Akasaki JL, Castaldelli VN, Soriano L, Monzó J, Payá J, et al. New geopolymeric binder based on fluid catalytic cracking catalyst residue (FCC). Mater Lett 2012;80:50-2.
26. Payá J, Monzó J, Borrachero MV, Velázquez S, Bonilla M. Determination of the pozzolanic activity of fluid catalytic cracking residue. Thermogravimetric analysis studies on FC3R-lime pastes. Cem Concr Res 2003;33:1085-91.
27. Payá J, Monzó J, Borrachero MV, Mellado A, Ordoñez LM. Determination of amorphous silica in rice husk ash by a rapid analytical method. Cem Concr Res 2001;31(2):227-31. (Pubitemid 33763344)
28. Kolesnikov IM, Frolova IN. Production and activity of sillimanite and sillimanite-zeolite aluminosilicate catalyst. J Appl Chem USSR 1982;55:561-71.
29. Reagan WJ, White DW, Schultz WR, Jarnagin LA, Pitts F. Mullite/silica contact material, its production, and its use in selective vaporization of petroleum feedstock, European Patent EP 0185551; 1986.
30. Liu C, Deng Y, Pan Y, Zheng S, Gao X. Interactions between heavy metals and clay matrix in fluid catalytic cracking catalysts. Appl Catal A-General 2004;257:145-50.
31. Fernández-Jiménez A, Delatorre A, Palomo A, Lopezolmo G, Alonso M, Aranda M. Quantitative determination of phases in the alkali activation of fly ash Part I. Potential ash reactivity. Fuel 2006;85:625-34. (Pubitemid 41706254)
32. Rahier H, Mele B, Biesemans M, Wastiels J, Wu X. Low-temperature synthesized aluminosilicate glasses. J Mater Sci 1996;31:71-9.
33. Rahier H, Simons W, Van Mele B, Biesemans M. Low-temperature synthesized aluminosilicate glasses: part III influence of the composition of the silicate solution on production, structure and properties. J Mater Sci 1997;32:2237-47. (Pubitemid 127503910)
34. 2O geopolymer systems. Cem Concr Res 2008;38:870-6.
35. 2O ratio on the alkali activation of fly ash. Cem Concr Res 2007;37:671-9.
36. van Deventer JSJ, Provis JL, Duxson P, Lukey GC. Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products. J Hazard Mater 2007;139:506-13. (Pubitemid 46074334)
37. Farmer VC. The infrared spectra of minerals. London: Royal Society; 1974.
38. Gadsden JA. Infrared spectra of minerals and related inorganic compounds. London, U.K.: Butterworth; 1975.
39. Bugaev LA, van Bokhoven JA, Sokolenko AP, Latokha YV, Avakyan LA. Local structure of aluminum in zeolite mordenite as affected by temperature. J Phys Chem B 2005;109:10771-8. (Pubitemid 40844510)
40. Miessner H, Kosslick H, Lohse U, Parlitz B, Tuan VA. Characterization of highly dealuminated faujasite-type zeolites: ultrastable zeolite Y and ZSM-20. J Phys Chem 1993;97:9741-8.
41. Masukawa T, Komatsu T, Yashima T. Alkylation of toluene on HSAPO-5 with various Si concentrations. Zeolites 1997;19:429-33. (Pubitemid 127747100)
42. Li B, González RD. An in situ DRIFTS study of the deactivation and regeneration of sulfated zirconia. Catal Today 1998;46:55-67. (Pubitemid 128410460)
43. Damjanović L, Auroux A. Determination of acid/base properties by temperature programmed desorption (TPD) and adsorption calorimetry. In: Chester AW, Derouane EG, editors. Zeolite characterization and catalysis. Netherlands: Springer. p. 107-67.
44. Flanigen EM. Structural analysis by infrared spectroscopy. In: Zeolite Chemistry and Catalysis. American Chemical Society, ACS Monograph Series: Washington (DC); 1976.
45. Rees CA, Provis JL, Lukey GC, van Deventer JSJ. Attenuated total reflectance Fourier transform infrared analysis of fly ash geopolymer gel aging. Langmuir 2007;23:8170-9. (Pubitemid 47155332)
46. Rees CA, Provis JL, Lukey GC, van Deventer JSJ. In Situ ATR-FTIR study of the early stages of fly ash geopolymer gel formation. Langmuir 2007;23:9076-82. (Pubitemid 47294327)
47. Lecomte I, Henrist C, Liégeois M, Maseri F, Rulmont A, Cloots R. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement. J Eur Ceram Soc 2006;26:3789-97. (Pubitemid 44418014)
48. Zhang Z, Wang H, Provis JL, Bullen F, Reid A, Zhu Y. Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide. Thermochim Acta 2012;539:23-33.
49. Fernández-Jiménez A, Palomo A. Mid-infrared spectroscopic studies of alkali-activated fly ash structure. Micropor Mesopor Mater 2005;86:207-14. (Pubitemid 41580078)
50. Fernández-Jiménez A, Palomo A, Sobrados I, Sanz J. The role played by the reactive alumina content in the alkaline activation of fly ashes. Micropor Mesopor Mater 2006;91:111-9.
51. Devine RAB. Ion implantation- and radiation-induced structural modifications in amorphous SiO2. J Non-Cryst Solids 1993;152:50-8. (Pubitemid 23613870)
52. Liu X. Infrared and Raman spectroscopy. In: Chester AW, Derouane EG, editors. Zeolite characterization and catalysis. Netherlands: Springer; 2010. p. 197-222.
53. 27Al MAS NMR spectra of mullites from different kaolinites. Spectrochim Acta A 2004;60:1061-4.
54. Hartman JS, Sherriff BL. Silicon-29 MAS NMR of the aluminosilicate mineral kyanite: residual dipolar coupling to aluminum-27 and nonexponential spin-lattice relaxation. J Phys Chem 1991;95:7575-9.
55. 29Si NMR of dealuminated and ultrastable Y-zeolites. Zeolites 1982;2:59-62.
56. Behera B, Ray SS. Structural changes of FCC catalyst from fresh to regeneration stages and associated coke in a FCC refining unit: A multinuclear solid state NMR approach. Catal Today 2009;141:195-204.
57. Engelhardt G, Michel D. High-resolution solid-state NMR of silicates and zeolites. New York: John Wiley and Sons; 1987.
58. Chen T-H, Houthoofd K, Grobet PJ. Toward the aluminum coordination in dealuminated mordenite and amorphous silica-alumina: a high resolution 27Al MAS and MQ MAS NMR study. Micropor Mesopor Mater 2005;86:31-7. (Pubitemid 41581716)
59. Rocha J, Carr SW, Klinowski J. 27Al quadrupole nutation and 1H-27Al cross-polarization solid-state NMR studies of ultrastable zeolite Y with fast magicangle spinning. Chem Phys Lett 1991;187:401-8.
60. Rakiewicz EF, Mueller KT, Jarvie TP, Sutovich KJ, Roberie TG, Peters AW. Solid-state NMR studies of silanol groups in mildly and highly dealuminated faujasites. Micropor Mater 1996;7:81-8. (Pubitemid 126828841)
61. 27Al MAS NMR spectroscopy of mullite. Phys Chem Miner 1991;18:47-52.
62. Duxson P, Lukey GC, Separovic F, van Deventer JSJ. Effect of alkali cations on aluminum incorporation in geopolymeric gels. Ind Eng Chem Res 2005;44:832-9. (Pubitemid 40227478)
63. Fyfe BCA, Thomas JM, Klinowski J, Gobbi GC. Magic-angle-spinning NMR (MAS-NMR) spectroscopy and the structure zeolites. Angew Chem Int Ed 1983;22:259-75. (Pubitemid 13520428)
64. Gore KU, Abraham A, Hegde SG, Kumar R, Amoureux J-P, Ganapathy S. MAS/3Q-MAS NMR studies of high silica USY zeolites. J Phys Chem B 2002;106:6115-20.
65. 29Si solid-state NMR studies of dealuminated mordenite. J Chem Soc Faraday Trans 1994;90:3719-23.
66. Klinowski J. Recent advances in solid-state NMR of zeolites. Annu Rev Mater Sci 1988;18:189-218.
67. 29Si MAS-NMR spectroscopy. J Non-Cryst Solids 1996;204:125-34.
68. 29Si NMR study of structural ordering in aluminosilicate geopolymer gels. Langmuir 2005;21:3028-36.
69. Duxson P, Provis JL, Lukey GC, Mallicoat SW, Kriven WM, van Deventer JSJ. Understanding the relationship between geopolymer composition, microstructure and mechanical properties. Colloids Surfaces A 2005;269:47-58. (Pubitemid 41512819)