Local heat flux measurement in a permanent magnet motor at no load

IEEE Transactions on Industrial Electronics

Volumn 60, Issue 11, 2013, Pages 4852-4860

  Jussila, Hanne K ^a   Mityakov, Andrey V ^a   Sapozhnikov, Sergey Z ^b   Mityakov, Vladimir Y ^b   Pyrhönen, Juha ^a  

^a LAPPEENRANTA UNIVERSITY OF TECHNOLOGY   (Finland)

^b PETER THE GREAT ST PETERSBURG POLYTECHNIC UNIVERSITY   (Russian Federation)

Author keywords

Axial flux permanent magnet (AFPM) machine; Concentrated tooth winding; Heat flux; Heat flux measurement; Permanent magnet machine

Indexed keywords

ELECTRIC MACHINERY; MAGNETIC FLUX; PERMANENT MAGNETS; REYNOLDS NUMBER; SENSORS; STATORS; TEMPERATURE MEASUREMENT;

AXIAL-FLUX PERMANENT MAGNET MACHINES; ELECTRICAL MACHINE; HEAT FLUX MEASUREMENT; LOCAL HEAT FLUX MEASUREMENT; NEW EXPERIMENTAL METHOD; NEW MEASUREMENT METHOD; PERMANENT MAGNET MOTOR; PERMANENT-MAGNET MACHINE;

HEAT FLUX;

EID: 84879089128     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2012.2222853     Document Type: Article

References (28)

1. D. A Howey, P. R. N Childs, and A. S Holmes, "Air-gap convection in rotating electrical machines," IEEE Trans. Ind. Electron., vol. 59, no. 3, pp. 1367-1375, Mar. 2012.
2. J. Nerg, M. Rilla, and J. Pyrhönen, "Thermal analysis of radial-flux electrical machines with a high power density," IEEE Trans. Ind. Electron., vol. 55, no. 10, pp. 3543-3554, Oct. 2008.
3. D. A. Howey, A. S. Holmes, and K. R. Pullen, "Measurement and CFD prediction of heat transfer in air-cooled disc-type electrical machines," IEEE Trans. Ind. Appl., vol. 47, no. 4, pp. 1716-1723, Jul./Aug. 2011.
4. "Omega (thin film heat flux sensor, self generating thermopile transducer)," 2012. [Online]. Available: http://www.omega.co.uk/ppt/pptsc. asp?ref=HFS-3-HFS-4&flag=1
5. D. A. Staton and A. Cavagnino, "Convection heat transfer and flow calculations suitable for electric machines thermal models," IEEE Trans. Ind. Electron., vol. 55, no. 10, pp. 3509-3516, Oct. 2008.
6. A. Boglietti, A. Cavagnino, and D. Staton, "Determination of critical parameters in electrical machine thermal models," IEEE Trans. Ind. Appl., vol. 44, no. 4, pp. 1150-1159, Jul./Aug. 2008.
7. T. A. Jankowski, F. C. Prenger, D. D. Hill, S. R. O'Bryan, K. K. Sheth, E. B. Brookbank, D. F. A. Hunt, and Y. A. Orrego, "Development and validation of a thermal model for electric induction motors," IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 4043-4054, Dec. 2010.
8. A. Boglietti, A. Cavagnino, D. A. Staton, M. Shanel, M. Mueller, and C. Mejuto, "Evolution and modern approaches for thermal analysis of electric machines," IEEE Trans. Ind. Electron., vol. 56, no. 3, pp. 871-882, Mar. 2009.
9. F. Sahin and A. J. A. Vandenput, "Thermal modeling and testing of a highspeed axial-flux permanent-magnet machine," COMPEL, Int. J. Comput. Math. Elect. Electron. Eng., vol. 22, no. 4, pp. 982-997, 2003.
10. D. A. Howey, A. S. Holmes, and K. R. Pullen, "Radially resolved measurement of stator heat transfer in a rotor-stator disc system," Int. J. Heat Mass Transf., vol. 53, no. 1-3, pp. 491-501, Jan. 2010.
11. D. A. Howey, A. S. Holmes, and K. R. Pullen, "Measurement of stator heat transfer in air-cooled axial flux permanent magnet machines," in Proc. IEEE Annu. Conf. 35th Ind. Electron., Porto, Portugal, Nov. 3-5, 2009, pp. 1197-1202.
12. S. Harmand, B. Watel, and B. Desmet, "Local convective heat exchanges from a rotor facing a stator," Int. J. Thermal Sci., vol. 39, no. 3, pp. 404-413, Mar. 2000.
13. C. H. Lim, G. Airoldi, R. G. Dominy, and K. Mahkamov, "Experimental validation of CFD modelling for heat transfer coefficient predictions in axial flux permanent magnet generators," Int. J. Thermal Sci., vol. 50, no. 12, pp. 2451-2463, Dec. 2011.
14. N. Divin, S. Sapozhnikov, and A. Kirillov, "Gradientenartige Messgeber fur die Messung des Warmestromes," in Proc. Messtechnik zur Undersuchung von Vorgangen in thermischen Energieanlagen. XXVIII. Kraftwerkstechnisches Kolloquium und 6. Kolloquium Messtechnik fur Energieanlagen, Dresden, Germany, 1996, pp. 155-160.
15. S. Z. Sapozhnikov, V. Yu. Mityakov, A. V. Mityakov, A. I. Pokhodun, N. A. Sokolov, and M. S. Matveev, "The calibration of gradient heat flux sensors," Meas. Tech., vol. 54, no. 10, pp. 1155-1159, Jan. 2012.
16. A. V. Mityakov, S. Z. Sapozhnikov, V. Y. Mityakov, A. A. Snarskii, M. I. Zhenirovsky, and J. J. Pyrhönen, "Gradient heat flux sensors for high temperature environments," Sens. Actuators A, Phys., vol. 176, no. 1, pp. 1-9, Apr. 2012.
17. M. A. Blinov, M. E. Lebedev, I. S. Muhina, L. A. Feldberg, B. S. Fokin, D. K. Zaitsev, E. L. Kitanin, S. F. Uras, and A. V. Mityakov, "Natural and mixed convection heat transfer of a cooling air in fissile material and spent fuel storage facilities," Heat Transf. Res., vol. 36, no. 4, pp. 295-309, 2005.
18. A. Zhukauskas, "Heat transfer from tubes in cross flow," in Advances in Heat Transfer. New York: Academic, 1972.
19. A. V. Mitiakov, V. Y. Mitiakov, S. Z. Sapozhnikov, and Y. S. Chumakov, "Application of the transverse seebeck effect to measurement of instantaneous values of a heat flux on a vertical heated surface under conditions of free-convection," High Temp., vol. 40, no. 4, pp. 620-625, Jul. 2002.
20. A. M. EL-Refaie, "Fractional-slot concentrated-windings synchronous permanent magnet machines: Opportunities and challenges," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 107-121, Jan. 2010.
21. G. De Donato, F. Giulii Gapponi, and F. Caricchi, "No-load performance of axial flux permanent magnet machines mounting magnetic wedges," IEEE Trans. Ind. Electron., vol. 59, no. 10, pp. 3786-3779, Oct. 2012.
22. R. Di Stefano and F. Marignetti, "Electromagnetic analysis of axialflux permanent magnet synchronous machines with fractional windings with experimental validation," IEEE Trans. Ind. Electron., vol. 59, no. 6, pp. 2573-2582, Jun. 2012.
23. H. Polinder and M. J. Hoeijmakers, "Eddy-current losses in the segmented surface-mounted magnets of a PM machine," IET Elect. Power Appl., vol. 146, no. 3, pp. 261-266, May 1999.
24. H. Toda, Z. Xia, J. Wang, K. Atallah, and D. Howe, "Rotor eddy current loss in permanent magnet brushless machines," IEEE Trans. Magn., vol. 40, no. 4, pp. 2104-2106, Jul. 2004.
25. W.-Y. Huang, A. Bettayeb, R. Kaczmarek, and J.-C. Vannier, "Optimization of magnet segmentation for reduction of eddy-current losses in permanent magnet synchronous machine," IEEE Trans. Energy Convers., vol. 25, no. 2, pp. 381-387, Jun. 2010.
26. F. Marighetti and R. Di Stefano, "Electromagnetic analysis of axial flux permanent magnet synchronous machines with fractional windings with experimental validation," IEEE Trans. Ind. Electron., vol. 59, no. 6, pp. 2573-2582, Jun. 2012.
27. H. Jussila, "Concentrated winding multiphase permanent magnet machine design and electromagnetic properties-Case axial flux machine," Ph.D. dissertation, Acta Universitatis Lappeenrantaensis 374, Lappeenranta Univ. Technol., Lappeenranta, Finland, 2009.
28. A. Di Gerlando, G. Foglia, M. F. Iacchetti, and R. Perini, "Axial flux PM machines with concentrated armature windings: Design analysis and test validation of wind energy generators," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 3795-3805, Sep. 2011.