Novel hybrid organic-geopolymer materials

Applied Clay Science

Volumn 73, Issue 1, 2013, Pages 42-50

  Ferone, Claudio ^a   Roviello, Giuseppina ^a   Colangelo, Francesco ^a   Cioffi, Raffaele ^a   Tarallo, Oreste ^b  

^a UNIVERSITY OF NAPLES PARTHENOPE   (Italy)

^b UNIVERSITY OF NAPLES FEDERICO II   (Italy)

Author keywords

Epoxy resin; Hybrid geopolymer; Metakaolin

Indexed keywords

COMPRESSIVE STRENGTH; DISPERSIONS; EPOXY RESINS; GEOPOLYMERS; INORGANIC POLYMERS; RESINS;

GEOPOLYMER; GEOPOLYMER MATERIALS; HOMOGENEOUS DISPERSIONS; HYBRID ORGANIC-INORGANIC MATERIALS; INORGANIC MATRICES; METAKAOLINS; STRUCTURAL APPLICATIONS; SYNTHETIC APPROACH; ORGANIC PARTICLES;

HYBRID MATERIALS;

COMPRESSIVE STRENGTH; CONCENTRATION (COMPOSITION); MIXING; POLYMER; RESIN; GEOCHEMISTRY; KAOLINITE;

EID: 84878903526     PISSN: 01691317     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.clay.2012.11.001     Document Type: Article

References (47)

1. Andini, S., Cioffi, R., Colangelo, F., Grieco, T., Montagnaro, F., Santoro, L., 2008. Coal fly ash as raw material for the manufacture of geopolymer-based products. Waste Management 28, 416-423.
2. Andini, S., Cioffi, R., Colangelo, F., Ferone, C., Montagnaro, F., Santoro, L., 2010. Characterization of geopolymer materials containing MSWI fly ash and coal fly ash. Advances in Science and Technology 69, 123-128.
3. Aronne, A., Esposito, S., Ferone, C., Pansini, M., Pernice, P., 2002. FTIR study of the thermal transformation of barium exchanged zeolite A to celsian. Journal of Materials Chemistry 12 (10), 3039-3045.
4. Barbosa, V.F.F., MacKenzie, K.J.D., 2003. Thermal behavior of inorganic geopolymer and composites derived from sodium polysialate. Materials Research Bulletin 38, 319-331.
5. Boccaccini, A.R., Bücker, M., Bossert, J., Marszalek, K., 1997. Glass matrix composites from coal fly ash and waste glass. Waste Management 17, 39-45.
6. Buchwald, A., Hohmann, M., Posern, K., Brendler, E., 2009. The suitability of thermally activated illite/smectite clay as raw material for geopolymer binders. Applied Clay Science 3, 300-304.
7. Catauro, M., Raucci, M.G., De Gaetano, F., Marotta, A., 2003. Sol-gel synthesis, characterization and bioactivity of polycaprolactone/SiO2 hybrid material. Journal of Materials Science 38, 3097-3102.
8. Catauro, M., Raucci, M.G., de Gaetano, F., Buri, A., Marotta, A., Ambrosio, L., 2004. Sol- gel synthesis, structure and bioactivity of polycaprolactone/CaO • SiO2 hybrid material. Journal of Materials Science. Materials in Medicine 15, 991-995.
9. Cioffi, R., Maffucci, L., Santoro, L., 2003. Optimization of geopolymer synthesis by calcination and polycondensation of a kaolinitic residue. Resources, Conservation and Recycling 40, 27-38.
10. Clayden, N.J., Esposito, S., Aronne, A., Pernice, P., 1999. Solid state 27Al NMR and FTIR study of lanthanum aluminosilicate glasses. Journal of Non-Crystalline Solids 258, 11-19.
11. Davidovits, J., 1991. Geopolymers: inorganic polymeric new materials. Journal of Thermal Analysis 37, 1633-1656.
12. De Santis, R., Catauro,M., Di Lucy, S., Manto, L., Raucci, M.G., Ambrosio, L., Nicolais, L., 2007. Effects of polymer amount and processing conditions on the in vitro behaviour of hybrid titanium dioxide/polycaprolactone composites. Biomaterials 28, 2801-2809.
13. Dias, D.P., Thaumaturgo, C., 2005. Fracture toughness of geopolymer concretes reinforced with basalt fibers. Cement and Concrete Composites 27, 49-54.
14. Duxson, P., Fernandez-Jimenez, A., Provis, J.L., Lukey, G.C., Palomo, A., van Deventer, J.S.J., 2007. Geopolymer technology: the current state of the art. Journal of Material Science 42, 2917-2933.
15. Felahi, S., Chikhi, N., Bakar, M., 2001. Modification of epoxy resin with kaolin as a toughening agent. Journal of Applied Polymer Science 82, 861-878.
16. Ferone, C., Colangelo, F., Cioffi, R., Montagnaro, F., Santoro, L., 2011. Mechanical performances of weathered coal fly ash based geopolymer bricks. Procedia Engineering 21, 745-752.
17. Ferone, C., Colangelo, F., Cioffi, R., Montagnaro, F., Santoro, L., 2012. Use of reservoir clay sediments as raw materials for geopolymer binders. Advances in Applied Ceramics. http://dx.doi.org/10.1179/1743676112Y.0000000064.
18. Frost, R.L., Fredericks, P.M., Shurvell, H.F., 1996. Raman microscopy of some kaolinite clay minerals. Canadian Journal of Applied Spectroscopy 41, 11-14.
19. Habert, G., d'Espinose de Lacaillerie, J.B., Roussel, N., 2011. An environmental evaluation of geopolymer based concrete production: reviewing current research trends. Journal of Cleaner Production 19, 1229-1238.
20. Hummel, D.O., Scholl, F., 1971. Infrared Analysis of Polymers, Resins and Additives An Atlas, vol. 1. Wiley Interscience, NewYork.
21. Hussain, M., Varley, R.J., Cheng, Y.B., Simon, G.P., 2004. Investigation of thermal and fire performance of novel hybrid geopolymer composites. Journal of Material Science 39, 4721-4726.
22. Hussain, M., Varley, R.J., Cheng, Y.B., Mathys, Z., Simon, G.P., 2005. Synthesis and thermal behaviour of inorganic-organic hybrid geopolymer composites. Journal of Applied Polymer Science 96, 112-121.
23. IUPAC, 1997. Compendium of chemical terminology. (the "Gold Book") Compiled by A. D. McNaught and A. Wilkinson2nd ed. Blackwell Scientific Publications, Oxford. (XML on-line corrected version: http://goldbook.iupac.org (2006-) created by M. Nic, J. Jirat, B. Kosata; updates compiled by A. Jenkins. ISBN 0-9678550-9-8. http://dx.doi.org/10.1351/goldbook).
24. Kickelbick, G., 2007. Introduction to Hybrid Materials. In: Kickelbick, G. (Ed.), Hybrid Materials: Synthesis, Characterization, and Applications. Wiley-VCH Verlag GmbH & Co. KGaA,Weinheim, Germany. http://dx.doi.org/10.1002/9783527610495.ch1.
25. Knowlton, G.D., White, T.R., Laurence McKague, H., 1981. Thermal study of types of water associated with clinoptilolite. Clays and Clay Minerals 29 (5), 403-411.
26. Komnitsas, K., 2011. Potential of geopolymer technology towards green buildings and sustainable cities. Procedia Engineering 21, 1023-1032.
27. Kong, D.L.Y., Sanjayan, J.G., Sagoe-Crentsil, K., 2007. Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures. Cement and Concrete Research 37, 1583-1589.
28. Li, W., Xu, J., 2009. Mechanical properties of basalt fiber reinforced geopolymeric concrete under impact loading. Materials Science and Engineering A 505, 178-186.
29. Lin, T., Jia, D., He, P., Wang, M., Liang, D., 2008. Effects of fiber length on mechanical properties and fracture behavior of short carbon fiber reinforced geopolymer matrix composites. Materials Science and Engineering A 497, 181-185.
30. Menna, C., Asprone, D., Ferone, C., Colangelo, F., Balsamo, A., Prota, A., Cioffi, R., Manfredi, G., 2013. Use of geopolymers for composite external reinforcement of RC members. Composites Part B 45, 1667-1676. http://dx.doi.org/10.1016/j.compositesb.2012.09.019.
31. Monette, L., Anderson, M.P., 1993. Effect of particle modulus and toughness on strength and toughness in brittle particulate composites. Scripta Metallurgica et Materialia 28, 1095-1100.
32. Ortego, J.D., Barroeta, Y., 1991. Leaching effects on silicate polymerization, a FTIR and 29Si NMR study of lead and zinc in Portland cement. Environmental Science and Technology 25, 1171-1174.
33. Parker, R.W., Frost, R.L., 1996. The application of drift spectroscopy to themulticomponent analysis of organic chemicals adsorbed on montmorillonite. Clays and Clay Minerals 44, 32-39.
34. Provis, J.L.,Duxon, P., van Deventer, J.S.J., 2010. The role of particle technology in developing sustainable construction materials. Advanced Powder Technology 21, 2-7.
35. Sathonsaowaphak, A., Chindaprasirt, P., Pimraksab, K., 2009. Workability and strength of lignite bottom ash geopolymer mortar. Journal of Hazardous Materials 168, 44-50.
36. Shi, C., Krivenko, P.V., Roy, D.M., 2006. Alkali-Activated Cements and Concretes. Taylor and Francis, Abington, UK.
37. Swain, M.V., 1989. Toughening mechanism for ceramics. Materials Forum 13, 237-253.
38. Tiesong, L., Dechang, J., Peigang, H., Meirong, W., Defu, L., 2008. Effects of fiber length on mechanical properties and fracture behavior of short carbon fiber reinforced geopolymer matrix composites. Materials Science and Engineering A 497, 181-185.
39. Wang, H., Li, H., Yan, F., 2005. Synthesis and mechanical properties of metakaolinite based geopolymer. Colloids and Surfaces A: Physicochemical and Engineering Aspects 268, 1-6.
40. Xu, H., van Deventer, J.S.J., 2000. The geopolymerisation of alumino-silicate minerals. International Journal of Mineral Processing 59, 247-266.
41. Zaharaki, D., Komnitsas, K., Perdikatsis, V., 2010. Use of analytical techniques for identification of inorganic polymer gel composition. Journal of Materials Science 45, 2715-2724.
42. Zhang, Y., Sun, W., Li, Z., 2006. Impact behavior and microstructural characteristics of PVA fiber reinforced fly ash-geopolymer boards prepared by extrusion technique. Journal of Materials Science 41, 2787-2794.
43. Zhang, Y., Sun, W., Li, Z., 2008a. Infrared spectroscopy study of structural nature of geopolymeric products. Journal of Wuhan University of Technology-Material Science Edition 23, 522-527.
44. Zhang, Y., Sun, W., Li, Z., Zhou, X., Eddie, C.C., 2008b. Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber. Construction and Building Materials 22, 370-383.
45. Zhang, Y.J., Li, S., Xu, D.L.,Wang, B.Q., Xu, G.M., Yang, D.F., Wang, N., Liu, H.C., Wang, Y.C., 2010a. A novel method for preparation of organic resins reinforced geopolymer composites. Journal of Material Science 45, 1189-1192.
46. Zhang, Y.J., Wang, Y.C., Xu, D.L., Li, S., 2010b. Mechanical performance and hydration mechanism of geopolymer composite reinforced by resin. Materials Science and Engineering A 527, 6574-6580.
47. Zhao, Q., Nair, B., Rahimian, T., Balaguru, P., 2007. Novel geopolymer based composites with enhanced ductility. Journal of Materials Science 42, 3131-3137