Friction and wear behaviors of a cylinder liner-piston ring with emulsified bio-oil as fuel

Tribology Transactions

Volumn 56, Issue 3, 2013, Pages 359-365

  Xu, Yu Fu ^a   Yu, Hui Qiang ^a   Wei, Xiao Yang ^a   Cui, Zheng ^a   Hu, Xian Guo ^a   Xue, Teng ^a   Zhang, Dan Yang ^a  

^a HEFEI UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Cylinder Liner Piston Ring; Emulsified Bio Oil; Friction and Wear; Oxidation Corrosion

Indexed keywords

BIO OIL; ENERGY DISPERSIVE X-RAY; FOURIER TRANSFORM INFRARED SPECTROPHOTOMETERS; FRICTION AND WEAR; FRICTION AND WEAR BEHAVIORS; GAS CHROMATOGRAPHY-MASS SPECTROMETRY; SCANNING ELECTRON MICROSCOPE; TRIBOLOGICAL PROPERTIES;

BIOFUELS; CORROSION; CYLINDERS (SHAPES); DIESEL FUELS; EMULSIFICATION; ENGINE CYLINDERS; FRICTION; GAS CHROMATOGRAPHY; SCANNING ELECTRON MICROSCOPY; SURFACE ROUGHNESS; TRIBOLOGY; WEAR OF MATERIALS;

PISTON RINGS;

EID: 84878852009     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402004.2012.754532     Document Type: Article

References (29)

1. Saidur, R., Abdelaziz, E. A., Demirbas, A., Hossain, M. S., and Mekhilef, S. (2011), "A Review on Biomass as a Fuel for Boilers, " Renewable & Sustainable Energy Reviews, 15(5), pp 2262-2289.
2. Demirbas, A. (2004), "Combustion Characteristics of Different Biomass Fuels, " Progress in Energy and Combustion Science, 30(2), pp 219-230.
3. Ellens, C. J. and Brown, R. C. (2012), "Optimization of a Free-Fall Reactor for the Production of Fast Pyrolysis Bio-Oil, " Bioresource Technology, 103(1), pp 374-380.
4. Lu, Q., Zhang, J., and Zhu, X. F. (2008), "Corrosion Properties of Bio-Oil and Its Emulsions with Diesel, " Chinese Science Bulletin, 53(23), pp 3726-3734.
5. Li, X., Richard, G., Caroline, L., Wang, Y., Daniel, M., Wang, S., Wu, H., Manuel, G. P., and Li, C. Z. (2011), "Simultaneous Catalytic Esterification of Carboxylic Acids and Acetalisation of Aldehydes in a Fast Pyrolysis Bio-Oil from Mallee Biomass, " Fuel, 90(7), pp 2530-2537.
6. Hew, K. L., Tamidi, A. M., Yusup, S., Lee, K. T., and Ahmad, M. M. (2010), "Catalytic Cracking of Bio-Oil to Organic Liquid Product (OLP), " Bioresource Technology, 101(22), pp 8855-8858.
7. Michio, I., Maria, S., and Ed, H. (2003), "Emulsification of Pyrolysis Derived Bio-Oil in Diesel Fuel, " Biomass and Bioenergy, 24(3), pp 221-232.
8. 2Conditions, " Journal of Fuel Chemistry and Technology, 38(6), pp 673-678.
9. Adjaye, J. D. and Bakhshi, N. N. (1995), "Production of Hydrocarbons by Catalytic Upgrading of a Fast Pyrolysis Bio-Oil. Part I: Conversion over Various Catalysts, " Fuel Processing Technology, 45(3), pp 161-183.
10. Chiaramonti, D., Bonini, M., Fratini, E., Tondi, G., Gartner, K., Bridgwater, A. V., Grimm, H. P., Soldaini, I., Webster, A., and Baglioni, P. (2003), "Development of Emulsions from Biomass Pyrolysis Liquid and Diesel and Their Use in Engines-Part 1: Emulsion Production, " Biomass and Bioenergy, 25(1), pp 85-99.
11. Xu, Y. F., Wang, Q. J., Hu, X. G., Li, C., and Zhu, X. F. (2010), "Characterization of the Lubricity of Bio-Oil/Diesel Fuel Blends by High Frequency Reciprocating Test Rig, " Energy, 35(1), pp 283-287.
12. Johansson, S., Nilsson, P. H., Ohlsson, R., and Roś enc, B. G. (2011), "Experimental Friction Evaluation of Cylinder Liner/Piston Ring Contact, " Wear, 271(3-4), pp 625-633.
13. Truhana, J. J., Qu, J., and Blau, P. J. (2005), "A Rig Test to Measure Friction and Wear of Heavy Duty Diesel Engine Piston Rings and Cylinder Liners Using Realistic Lubricants, " Tribology International, 38(3), pp 211-218.
14. Xiong, W.M., Zhu, M. Z., Deng, L., Fu, Y., and Guo, Q. X. (2009), "Esterification of Organic Acid in Bio-Oil Using Acidic Ionic Liquid Catalysts, " Energy and Fuels, 23(4), pp 2278-2283.
15. Jiḿenez, A. E., Bermú dez, M. D., Carrió n, F. J., and Mart́i{dotless}nez-Nicolá s, G. (2006), "Room Temperature Ionic Liquids as Lubricant Additives in Steel-Aluminium Contacts: Influence of Sliding Velocity, Normal Load and Temperature, " Wear, 261(3-4), pp 347-359.
16. Hilten, R. N. and Das, K. C. (2010), "Comparison of Three Accelerated Aging Procedures to Assess Bio-Oil Stability, " Fuel, 89(10), pp 2741-2749.
17. Hiratsuka, K. and Inagaki, M. (2012), "Effects of Temperature, Sliding Velocity and Non-Friction Time on Severe-Mild Wear Transition of Iron, " Tribology International, 49, pp 39-43.
18. Lee, E. J., Hwang, H. J., Lee, W. G., Cho, K. H., and Jang, H. (2010), "Morphology and Toughness of Abrasive Particles and Their Effects on the Friction and Wear of Friction Materials: A Case Study with Zircon and Quartz, " Tribology Letters, 37(3), pp 637-644.
19. Fu, J. Z., Papadopoulos, K.D., Lu, Y. F., and Campbell, C. B. (2007), "Ostwald Ripening: A Decisive Cause of Cylinder Corrosive Wear, " Tribology Letters, 27(1), pp 21-24.
20. Storozheva, E. N., Sekushin, V. N., and Tsyganenko, A. A. (2006), "FTIR Spectroscopy Evidence for the Basicity Induced by Adsorption, " Catalysis Letters, 107(3-4), pp 185-188.
21. Spada, F. E. and Basov, D. (2000), "Fourier Transform Infrared Investigation of Thin Perfluoropolyether Films Exposed to Electric Fields, " Tribology Letters, 8(2-3), pp 179-186.
22. Coates, J., Setti, L., and McCaa, B. (1984), "The Analytical and Statistical Evaluation of Infrared Spectroscopic Data from Used Diesel Lubricants, " SAE Technical Paper 841373.
23. Zheng, J. L. and Wei, Q. (2011), "Improving the Quality of Fast Pyrolysis Bio-Oil by Reduced Pressure Distillation, " Biomass and Bioenergy, 35(5), pp 1804-1810.
24. Kim, T. S., Kim, J. Y., Kim, K. H., Lee, S., Choi, D., Choi, I.G., and Choi, J. W. (2012), "The Effect of Storage Duration on Bio-Oil Properties, " Journal of Analytical and Applied Pyrolysis, 95, pp 118-125.
25. Xu, J., Jiang, J., Lv, W., Dai, W., and Sun, Y. (2010), "Rice Husk Bio-Oil Upgrading by Means of Phase Separation and the Production of Esters from the Water Phase, and Novolac Resins from the Insoluble Phase, " Biomass and Bioenergy, 34(7), pp 1059-1063.
26. Akali{dotless}n, M. K., Tekin, K., and Karagö z, S. (2012), "Hydrothermal Liquefaction of Cornelian Cherry Stones for Bio-Oil Production, " Bioresource Technology, 110, pp 682-687.
27. Coles, J. M., Chang, D. P., and Zauscher, S. (2010), "Molecular Mechanisms of Aqueous Boundary Lubrication by Mucinous Glycoproteins, " Current Opinion in Colloid & Interface Science, 15(6), pp 406-416.
28. Chelliah, N. and Kailas, S. V. (2009), "Synergy Between Tribo-Oxidation and Strain Rate Response on Governing the Dry Sliding Wear Behavior of Titanium, " Wear, 266(7-8), pp 704-712.
29. Zhang, J. and Li, N. (2007), "Analysis on Liquid Metal Corrosion-oxidation Interactions, " Corrosion Science, 49(11), pp 4154-4184.