Heat generation during implant placement in low-density bone: Effect of surgical technique, insertion torque and implant macro design

Clinical Oral Implants Research

Volumn 24, Issue 7, 2013, Pages 798-805

  Marković, Aleksa ^a   Mišić, Tijana ^a   Miličić, Biljana ^a   Calvo Guirado, Jose Luis ^b   Aleksić, Zoran ^a   Dinić, Ana ^a  

^a UNIVERSITY OF BELGRADE   (Serbia)

^b UNIVERSITY OF MURCIA   (Spain)

Author keywords

Bone temperature; Implant macrodesign; Implant placement; Insertion torque; Low density bone; Surgical technique; Thermocouple technology

Indexed keywords

ANIMAL; ANIMAL MODEL; ARTICLE; BODY TEMPERATURE; BONE DENSITY; COMPARATIVE STUDY; EQUIPMENT; HEAT; MALE; METHODOLOGY; OSTEOTOMY; PHYSIOLOGY; RANDOMIZATION; RIB; SWINE; THERMOMETER; TOOTH IMPLANT; TOOTH IMPLANTATION; TOOTH PROSTHESIS; TORQUE;

ANIMALS; BODY TEMPERATURE; BONE DENSITY; DENTAL IMPLANTATION, ENDOSSEOUS; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; HOT TEMPERATURE; MALE; MODELS, ANIMAL; OSTEOTOMY; RANDOM ALLOCATION; RIBS; SWINE; THERMOMETERS; TORQUE;

EID: 84878740318     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/j.1600-0501.2012.02460.x     Document Type: Article

References (41)

1. Abouzgia, M.B. & James, D.F. (1997) Temperature rise during drilling through bone. The International Journal of Oral & Maxillofacial Implants 12: 342-353.
2. Abouzgia, M.B. & Symington, J.M. (1996) Effect of drill speed on bone temperature. The International Journal of Oral and Maxillofacial Surgery 25: 394-399.
3. Aerssen, J., Boonen, S., Lowet, G. & Dequeker, J. (1998) Interspecies differences in bone composition, density, and quality: potential applications for in vivo bone research. Endocrinology 139: 663-670.
4. Bonfield, W. & Li, C.H. (1968) The temperature dependence of the deformation of bone. Journal of Biomechanics 1: 323-329.
5. Branemark, P.-I., Zarb, G.A. & Albrektsson, T. (1985) Tissue-Integrated Prostheses: Osseointegration in Clinical Dentistry, 1st edition, 199-210. Chicago: Quintessence.
6. Byrne, D.P., Lacroix, D., Planell, J.A., Kelly, D.J. & Prendergast, P.J. (2007) Simulation of tissue differentiation in a scaffold as a function of porosity, Young's modulus and dissolution rate: application of mechanobiological models in tissue engineering. Biomaterials 36: 5544-5554.
7. Checa, S. & Prendergast, P.J. (2010) Effect of cell seeding and mechanical loading on vascularization and tissue formation inside a scaffold. A mechanico-biological model using a lattice approach to simulate cell activity. Journal of Biomechanics 5: 961-968.
8. Clattenburg, R., Cohen, J., Conner, S. & Cook, N. (1975) Thermal properties of cancellous bone. Journal of Biomedical Materials Research 9: 169-182.
9. Eriksson, R.A. & Adell, R. (1986) Temperatures during drilling for the placement of implants using the osseointegration technique. Journal of Oral and Maxillofacial Surgery 44: 4-7.
10. Eriksson, R.A. & Albrektsson, T. (1983) Temperature threshold levels for heat induced bone tissue injury. A vital microscopic study in rabbit. Journal of Prosthetic Dentistry 50: 101-107.
11. Eriksson, R.A., Albrektsson, T. & Albrektsson, B. (1984) Heat caused by drilling cortical bone. Temperature measured in vivo in patients and animals. Acta Orthopedica Scandinavica 55: 629-631.
12. Fanuscu, M.I., Chang, T.-L. & Akca, K. (2007) Effect of surgical techniques on primary implant stability and peri-implant bone. Journal of Oral and Maxillofacial Surgery 65: 2487-2491.
13. Geng, J.P., Ma, Q.S., Xu, W., Tan, K.B.C. & Liu, G.R. (2004) Finite element analysis of four thread-form configurations in a stepped screw implant. Journal of Oral Rehabilitation 31: 233-239.
14. Hahn, J. (1999) Clinical uses of osteotomes. Journal of Oral Implantology 25: 23-29.
15. Irinakis, T. & Wiebe, C. (2009) Initial torque stability of a new bone condensing dental implant. A cohort study of 140 consecutively placed implants. Journal of Oral Implantology 6: 277-282.
16. Iyer, S., Weiss, C. & Mehta, A. (1997) Effect of drill speed on heat production and quality of bone formation in dental implant osteotomies. Part II: relationship between drill speed and healing. International Journal of Prosthodontics 10: 536-540.
17. ®-titanium cannon drills: thermal response and scanninf electron microscopic findings. Clinical Oral Implants Research 11: 139-143.
18. Johansson, B., Back, T. & Hirsch, J.M. (2004) Cutting torque measurements in conjuction with implant placement in grafted and non grafted maxillas as an objective evaluation of bone density: a possible method for identifying early implant failures? Clinical Implant Dentistry & Related Research 6: 9-15.
19. Karmani, S. (2006) The thermal properties of bone and the effects of surgical intervention. Current Orthopaedics 20: 52-58.
20. Kim, S.J., Yoo, J., Kim, Y.S. & Shin, S.W. (2010) Temperature change in pig rib bone during implant site preparation by low-speed drilling. Journal of Applied Oral Science 18: 522-527.
21. Lekholm, U. & Zarb, G.A. (1985) Patient selection and preparation. In: Branemark, P.-I., Zarb, G.A. & Albrektsson, T., eds. Tissue-Integrated Prostheses: Osseointegration in Clinical Dentistry 1st edition, 199-210. Chicago: Quintessence.
22. Lundskog, J. (1972) Heat and bone tissue. An experimental investigation of the thermal properties of bone and threshold levels for thermal injury. Scandinavian Journal of Plastic and Reconstructive Surgery 9: 1-80.
23. Marković, A., Calvo-Guirado, J.L., Delgado-Ruiz, R., Lazić, Z., Ćalasan, D., Čolic, S., Gačić, B., Janjić, B. & Mišić, T. (2011a) Evaluation of primary stability of self-tapping and non-self-tapping dental implants. A 12-week clinical study. Clinical Implant Dentistry & Related Research doi: 10.1111/j.1708-8208.2011.00415.x.
24. Marković, A., Ćalasan, D., Čolić, S., Stojčev-Stajčić, Lj., Janjić, B. & Mišić, T. (2011b) Implant stability in posterior maxilla: bone-condensing versus bone-drilling. Clinical study. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology & Endodontics 112: 557-563.
25. Matthews, L.S. & Hirsch, C. (1972) Temperatures measured in human cortical bone when drilling. Journal of Bone and Joint Surgery. American Volume 54: 297-308.
26. Mauch, M., Currey, J.D. & Sedman, A.J. (1992) Creep fracture in bones with different stiffness. Journal of Biomechanics 25: 11-16.
27. Mavrogenis, A.F., Dimitriou, R., Parvizi, J. & Babis, G.C. (2009) Biology of implant osseointegration. Journal of Musculoskeletal and Neuronal Interactions 9: 61-71.
28. Mišić, T., Marković, A., Todorović, A., Čolić, S., Šćepanović, M. & Miličić, B. (2011) An in vitro study of temperature changes in type 4 bone during implant placement: bone condensing versus bone drilling. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology & Endodontics 112: 28-33.
29. Niimi, A., Ozeki, K., Ueda, M. & Nakayama, B. (1997) A comparative study of removal torque of endosseous implants in the fibula, iliac crest and scapula of cadavers: preliminary report. Clinical Oral Implants Research 8: 286-289.
30. O'Sullivan, D., Sennerby, L. & Meredith, N. (2000) Measurements comparing the initial stability of five design of dental implants: a human cadaver study. Clinical Implant Dentistry & Related Research 2: 85-92.
31. Ottoni, J.M., Oliveira, Z.F., Mansini, R. & Cabral, A.M. (2005) Correlation between placement torque and survival of single-tooth implants. The International Journal of Oral & Maxillofacial Implants 5: 769-776.
32. Park, K.J., Kwon, J.-Y., . Kim, S.-K., Heo, S.-J., Koak, J.-Y., Lee, J.-H., Lee, S.-J., Kim, T.-H. & Kim, M.-J. (2012) The relationship between implant stability quotient values and implant insertion variables: a clinical study. Journal of Oral Rehabilitation 39: 151-159.
33. Piattelli, A., Piattelli, M., Mangano, C. & Scarano, A. (1998) A histologic evaluation of eight cases of failed dental implants: is bone overheating the most probable cause? Biomaterials 19: 683-690.
34. Rimnac, C.M., Pekto, A.A., Santner, T.J. & Wright, T.M. (1993) The effect of temperature, stress and microstructure on the creep of compact bovine bone. Journal of Biomechanics 26: 219-228.
35. Sedlin, E.D. & Hirsch, C. (1966) Factors affecting the determination of the physical properties of femoral cortical bone. Acta Orthopaedica Scandinavica 37: 29-48.
36. Sener, B.C., Dergin, G., Gursoy, B., Kelesoglu, E. & Slih, I. (2009) Effects of irrigation temperature on heat control in vitro at different drilling depths. Clinical Oral Implants Research 20: 294-298.
37. Summers, R.B. (1994) A new concept in maxillary implant surgery: the osteotome technique. Compendium of Continuing Education in Dentistry 15: 152-60.
38. Tehemar, S.H. (1999) Factors affecting heat generation during implant site preparation: a review of biologic observations and future considerations. The International Journal of Oral & Maxillofacial Implants 14: 127-136.
39. Van Staden, R.C., Guan, H., Johnson, N.W., Loo, Y.C. & Meredith, N. (2008) Step-wise analysis of the dental implant insertion process using the finite element technique. Clinical Oral Implants Research 3: 303-313.
40. Wikenheiser, M.A., Markel, M.D., Lewallen, D.G. & Chao, E.Y.S. (1995) Thermal response and torque resistance of five cortical half-pins under simulated insertion technique. Journal of Orthopaedic Research 13: 615-619.
41. Zix, J., Kessler-Liechti, G. & Mericske-Stern, R. (2005) Stability measurements of 1-stage implants in the maxilla by means of resonance frequency analysis: a pilot study. The International Journal of Oral & Maxillofacial Implants 20: 747-752.