Stearic acid coating on circulating fluidized bed combustion fly ashes and its effect on the mechanical performance of polymer composites

Applied Surface Science

Volumn 279, Issue , 2013, Pages 109-115

  Yao, Nina ^a   Zhang, Ping ^a   Song, Lixian ^a   Kang, Ming ^a   Lu, Zhongyuan ^a   Zheng, Rong ^b  

^a SOUTHWEST UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

^b Sichuan Jinhe Group Co Ltd   (China)

Author keywords

CFBC fly ashes; Interface; Polymer composites; Stearic acid; Surface treatment

Indexed keywords

COUPLING AGENTS; FILLED POLYMERS; FLUIDIZED BED PROCESS; FLUIDIZED BEDS; FLY ASH; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; INTERFACES (MATERIALS); PARTICLE SIZE; PARTICLE SIZE ANALYSIS; PLASTIC COATINGS; POLYPROPYLENES; STEARIC ACID; SURFACE TREATMENT; THERMOANALYSIS; THERMOGRAVIMETRIC ANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION; X RAY PHOTOELECTRON SPECTROSCOPY;

BRUNAUER EMMETT TELLERS; CIRCULATING FLUIDIZED BED COMBUSTIONS; ELONGATION AT BREAK; FILLER MATERIALS; MECHANICAL PERFORMANCE; PARTICLE SIZE ANALYZERS; POLYMER COMPOSITE; POWDER X RAY DIFFRACTION;

FLUIDIZED BED COMBUSTION;

EID: 84878613952     PISSN: 01694332     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apsusc.2013.04.045     Document Type: Article

References (34)

1. J. Koornneef, M. Junginger, and A. Faaij Development of fluidized bed fluidized combustion - an overview of trends, performance and cost Progress in Energy and Combustion Science 33 2007 19 55
2. th pilot-scale circulating fluidized bed with oxy-fuel combustion Applied Energy 88 2011 2940 2948
3. X.G. Li, Q.B. Chen, K.Z. Huang, B.G. Ma, and B. Wu Cementitious properties and hydration mechanism of circulating fluidized bed combustion (CFBC) desulfurization ashes Construction and Building Materials 36 2012 182 187
4. Y. Li, J.S. Zhang, Q. Liu, J.L. Lu, G.X. Yue, A.F. Sarofim, J.M. Beér, Y.Y. Lee, and B. Eliasson Study of the reactivity and formation of the unburnt carbon in CFAs Developments in Chemical Engineering and Mineral Processing 9 2001 301 312
5. C. Wang, L. Jia, Y. Tan, and Simultaneous Carbonation Sulfation of CaO in oxy-fuel CFB combustion Chemical Engineering & Technology 34 2011 1685 1690
6. E. Anthony, L. Jia, A. Iribarne, G. Welford, J. Wang, and O. Trass Calcium sulphide in FBC boilers and its fate using liquid water reactivation Fuel 85 2006 1871 1879
7. A. Rao, E.J. Anthony, and V. Manovic Sonochemical treatment of FBC ash: a study of the reaction mechanism and performance of synthetic sorbents Fuel 87 2008 1927 1933
8. M.S. Yildirim, Y. Bicer, and C. Yildiz Utilization of fly ash and polypropylene wastes in the production of a new porous composite material Journal of Porous Materials 3 1996 189 191
9. R.J. Deschamps Using FBC stoker ashes as roadway fill: a case study Geotechnical and Geoenvironmental Engineering 124 1998 1120 1127
10. T. Takada, I. Hashimoto, and K. Tsutsumi Utilization of coal ash from fluidized bed combustion boilers as road base material Resources, Conservation and Recycling 14 1995 69 77
11. N. Koukouzas, C. Ketikid, G. Itskos, X. Spiliotis, V. Karayannis, and G. Papapolymerou Synthesis of CFB-coal fly ash clay bricks and their characterisation Waste and Biomass Valorization 2 2011 87 94
12. C.S. Shon, D. Saylak, and D.G. Zollinger Potential use of stockpiled circulating fluidized bed combustion ashes in manufacturing compressed earth bricks Construction and Building Materials 23 2009 2062 2071
13. G. Nader, and M.C.A. Garcia Compacted non-cement concrete utilizing fluidized bed and pulverized coal combustion by-products ACI Materials Journal 95 1998 582 592
14. Q. Li, H. Xu, X.R. Fu, C. Chen, and J.P. Zhai Effects of circulating fluidized bed combustion (CFBC) fly ashes as filler on the performances of asphalt Asia-Pacific Journal of Chemical Engineering 4 2009 226 235
15. M.R. Parvaiz, S. Mohanty, S.K. Nayak, and P.A. Mahanwar Polyetheretherketone composites reinforced with surface modified mica Polymer Composites 31 2010 2121 2128
16. M.R. Parvaiz, P.A. Mahanwar, S. Mohanty, and S.K. Nayakm Effect of surface modification of fly ash on the mechanical thermal, electrical and morphological properties of polyetheretherketone composites Materials Science and Engineering: A 528 2011 4277 4286
17. A.M.A.M. Altaweel, C. Ranganathaiah, and B. Siddramaiah Positron lifetime spectroscopy and differential scanning calorimetric study of polystyrene-based composites with fly ash cenospheres, and calcium aluminosilicate as fillers Journal of Applied Polymer Science 116 2010 3087 3094
18. I. Iraola-Arregui, H. Potgieter, and C.M. Liauw Evaluation of coupling agents in poly(propylene)/fly ash composites: effect on processing and mechanical properties Macromolecular Materials and Engineering 296 2011 810 819
19. D. Ray, S. Banerjee, A.K. Mohanty, and M. Misra Thermal and electrical behavior of vinylester resin matrix composites filled with fly ash particles Polymer Composites 29 2008 58 62
20. D.C.D. Nath, S. Bandyopadhyay, A. Yu, D. Blackburn, and C. White High strength bio-composite films of poly(vinyl alcohol) reinforced with chemically modified-fly ash Journal of Materials Science 45 2009 1354 1360
21. H. Kim, J. Biswas, and S. Choe Effects of stearic acid coating on zeolite in LDPE, LLDPE, and HDPE composites Polymer 47 2006 3981 3992
22. D.C.D. Nath, S. Bandyopadhyay, J. Rider, A. Yu, D. Blackburn, and C. White Study of dynamic mechanical properties and morphological behaviours of fly ash reinforced polypropylene composites Macromolecular Research 19 2011 338 344
23. 3 on the crystallization behavior and mechanical properties of polypropylene Chinese Journal of Chemical Engineering 14 2006 814 818
24. 2 microcrystals Applied Surface Science 258 2012 2778 2782
25. 3 and fatty acid coating Colloids and Surfaces A 35 2009 65 70
26. T. Tang, Z.M. Zhang, Z.J. Ding, and H. Yoshikawa Deriving effective energy loss function for silver from XPS spectrum Physics Procedia 32 2012 165 172
27. X.K. Ma, N.H. Lee, H.J. Oh, J.W. Kim, C.K. Rhee, K.S. Park, and S.J. Kim Surface modification and characterization of highly dispersed silica nanoparticles by a cationic surfactant Colloids and Surfaces A 358 2010 172 176
28. S.L. Zheng Surface Modification of Powder Second ed. 2003 China Building Materials Press Beijing
29. 2 ) nanoparticles Tribology Letters 41 2010 409 416
30. 2 nanoparticles as lubricant additives Materials Science and Engineering A 359 2003 82 85
31. Y. Song, J. Qian, Z. Wang, and H. Wang Microstructure and pozzolanic reactivity of fluidized bed combustion ashes Journal of the Chinese Ceramic Society 34 2006 1542 1546
32. R.P.S. Chakradhar, and V. Dinesh Kumar Water-repellent coatings prepared by modification of ZnO nanoparticles Spectrochimica Acta, Part A 94 2012 352 356
33. P. Ghods, O.B. Isgor, J.R. Brown, F. Bensebaa, and D. Kingston XPS depth profiling study on the passive oxide film of carbon steel in saturated calcium hydroxide solution and the effect of chloride on the film properties Applied Surface Science 257 2011 4669 4677
34. 2 nanoparticles Progress in Organic Coatings 71 2011 391 398