Design for SLS according to fib Model Code 2010

Structural Concrete

Volumn 14, Issue 2, 2013, Pages 99-123

  Balázs, György L ^a   Bisch, Philippe ^b   Borosnyõi, Adorján ^a   Burdet, Olivier ^c   Burns, Clare ^d   Ceroni, Francesca ^e   Cervenka, Vladimir ^f   Chiorino, Mario A ^g   Debernardi, Piergiorgio ^g   Eckfeldt, Lars ^h   El Badry, Mamdouh ⁱ   Fehling, Ekkehard ^j   Foster, Stephen J ^k   Ghali, Amin ⁱ   Gribniak, Viktor ^l   Guiglia, Matteo ^g   Kaklauskas, Gintaris ^l   Lark, Robert J ^m   Lenkei, Peter ⁿ   Lorrain, Michel ^o   Marí, Antonio ^p   Ozbolt, Josko ^q   Pecce, Marisa ^r   Pérez Caldentey, Alejandro ^e   Taliano, Maurizio ^g   Tkalcic, Damir ^s   Torrenti, Jean Michel ^t   Torres, Lluis ^u   Toutlemonde, François ^t   Ueda, Tamon ^v   Vitek, Jan L ^w   Vráblík, Lukáš ^a,w   more..

^a BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS   (Hungary)

^b Egis Industries   (France)

^c EPFL   (Switzerland)

^d Walt + Galmarini AG   (Switzerland)

^e UNIVERSITY OF SANNIO   (Italy)

^f Cervenka Consulting Ltd   (Czech Republic)

^g POLITECNICO DI TORINO   (Italy)

^h TECHNICAL UNIVERSITY OF BRAUNSCHWEIG   (Germany)

ⁱ UNIVERSITY OF CALGARY   (Canada)

^j UNIVERSITY OF KASSEL   (Germany)

^k UNIVERSITY OF NEW SOUTH WALES   (Australia)

^l VILNIUS GEDIMINAS TECHNICAL UNIVERSITY   (Lithuania)

^m CARDIFF UNIVERSITY   (United Kingdom)

ⁿ UNIVERSITY OF PÉCS   (Hungary)

^o INSA   (France)

^p UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

^q UNIVERSITY OF STUTTGART   (Germany)

^r UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

^s Tempus Projekt   (Croatia)

^t UNIVERSITÉ GUSTAVE EIFFEL   (France)

^u UNIVERSITY OF GIRONA   (Spain)

^v HOKKAIDO UNIVERSITY   (Japan)

^w CZECH TECHNICAL UNIVERSITY IN PRAGUE   (Czech Republic)

more..

Author keywords

analysis and design methods; design and construction; directives; guidelines; regulations; standards

Indexed keywords

BOND LENGTH; DEFLECTION (STRUCTURES); PRESTRESSED CONCRETE; STANDARDS;

DESIGN AND CONSTRUCTION; DESIGN METHOD; DIRECTIVES; GUIDELINES; REGULATIONS;

CRACKS;

EID: 84878531363     PISSN: 14644177     EISSN: 17517648     Source Type: Journal    
DOI: 10.1002/suco.201200060     Document Type: Review

References (87)

1. fib: Model Code for Concrete Structures 2010, Ernst and Son, 2013 (in press).
2. Corres, H. P., Sound engineering through conceptual design. according to the fib Model Code 2010. Structural Concrete Journal (2013) 2, pp. 89-98.
3. Balázs, G. L.: Crack Control. In: fib Bulletin 52 (Structural Concrete-Textbook on behaviour, design and performance, vol. 2, section 4.3.2), Lausanne, 2010, pp. 97-132.
4. CEB: Behaviour and modelling in serviceability limit states including repeated and sustained loads. CEB Bulletin d'Information No. 235, Lausanne, Apr 1997
5. Walraven, J., Bigaj, A., The 2010 fib Model Code for Concrete Structures: a new approach to structural engineering. Structural Concrete Journal 12, (2011) 3, pp. 139-147.
6. Walraven, J., fib Model Code for Concrete Structures 2010: mastering challenges and encountering new ones. Structural Concrete Journal (2013) 1, pp. 3-9.
7. fib: Design of durable concrete structures. fib Bulletin 53, section 5 of fib Textbook on behaviour, design and performance (vol. 3), Lausanne 2009, 338 pp.
8. Helland, S., Design for service life: implementation of fib Model Code 2010 rules in the operational code ISO 16204. Structural Concrete Journal (2013) 1, pp. 10-18.
9. Beeby, A.W.: Cracking: what are crack width limits for? Concrete, Jul 1978, pp. 31-33
10. Leonhardt, F.: Cracks and Crack Control in Concrete Structures. PCI Journal, Jul-Aug 1988, pp. 124-145
11. Toutlemonde, F., Pascu, I. R., Ranc, G., Kretz, T.: Analysis of structural effects of through cracks in a reinforced concrete slab (Analyse des effets structurels de la fissuration traversante dans une dalle de béton armé), 2005, Bull LPC, 256-257, pp. 193-213. (in French)
12. Castel, A.: Coupled mechanical/corrosion problem in reinforced concrete members (Couplage mécanique et corrosion dans les éléments de béton armé), PhD thesis, Paul Sabatier University (Toulouse, France), Jan 2000 (in French).
13. Vidal, T., Castel, A., François, R., Analyzing crack width to predict corrosion in reinforced concrete. Cement and Concrete Research (2004) 34/1, pp. 165-174.
14. Schiessl, P.: Zur Frage der zulässigen Rissbreite und der erforderlichen Betondeckung im Stahlbetonbau unter besonderer Berücksichtigung der Karbonatisierungstiefe des Betons. Deutscher Ausschuss für Stahlbeton, 1976, No. 255.
15. Schiessl, P.: Grundlagen der Neuregelung zur Beschränkung der Rissbreite. Deutscher Ausschuß für Stahlbeton, 1989, No. 400, pp. 158-175.
16. Otsuki, N., Miyazoto, S., Diola, N. D., Suzuki, H., Influences of Bending Crack and Water-Cement Ratio on Chloride-Induced Corrosion of Main Reinforcing Bars and Stirrups. ACI Materials Journal Jul/Aug 2000, 97, 4, pp. 454-464.
17. fib: FRP reinforcement in RC structures. fib Bulletin 40, Lausanne, 2007
18. Ceroni, M., Pecce, M., Design provisions for crack spacing and width in RC elements externally bonded with FRP. Composites Part B (2009) 40, pp. 17-28.
19. Goto, Y., Otsuka, K., Studies on Internal Cracks Formed in Concrete Around Deformed Tension Bars. ACI Journal Apr 1971, 68, 4, pp. 244-251.
20. Eckfeldt, L.: In-depth Analysis on Bond of Reinforcement in Cracked RC Structures. Proc. of 4th International Symposium on Bond in Concrete 2012: Bond, Anchorage, Detailing, Brescia, Italy, 17-20 Jun 2012, eds.: John W. Cairns, Giovanni Metelli, Giovanni A. Plizzari: 1, General Aspects of Bond. ISBN/ISSN 978-88-907078-1-0, pp. 113-120
21. Windisch, A.: Probabilistic Aspects of Bond-Governed Problems Based on Local Bond Force-Slip Diagrams Determined by a New Method. Proc. of Int. Symp. on Bond in Concrete, Applied Science Publishers, London, 1982, pp. 458-466
22. Windisch, A.: Characteristic crack widths in tensile and flexural elements. Materials and Structures II. (Zur Berechnung von kritischen Rissbreiten in Zugstäben und Biegebalken. Werkstoff und Konstruktion II.) Prof. Rehm 65th Birthday, 1989. ibidem-Publisher, Stuttgart, pp. 241-261 (in German)
23. Eckfeldt, L.: Opportunities and Limits of Crack Control in Respect to Varying Bond Situations (Möglichkeiten und Grenzen der Berechnung von Rissbreiten in veranderlichen Verbundsituationen), PhD thesis, TU Dresden, 2006 (in German).
24. Eckfeldt, L.: Crack Control-The Performance of current calculation models compared to theoretical studies on long bond length. Proceedings of fib Symp. 2005, Budapest (eds.: Balázs, G. L., Borosnyõi, A.), pp. 705-710.
25. Eckfeldt, L.; Schröder, S.; Lemnitzer, L.; Hamdan, A.; Curbach, M.: Verbesserung der Vorhersagequalität von sehr kleinen Rissbreiten (Improvement of the prediction quality of very small crack widths). Final report on research project for Deutsche Institut für Bautechnik (DIBt), Institute of Concrete Structures, TU Dresden, 2009, 317pp
26. Husain, S. I., Ferguson, P. M.: Flexural Crack Widths at the Bars in Reinforced Concrete Beams. Center for Highway Research, The University of Texas at Austin 1968, resarch report No. 102-1F.
27. Yannopoulos, P. J.: Variation of concrete crack width through the concrete cover to reinforcement. Magazine of Concrete Research, Jun 1989, pp. 63-68
28. Tammo, K., Thelandersson, S., Crack opening near reinforcement bars in concrete structures. Structural Concrete (2006) 4, pp. 137-143.
29. Borosnyõi, A., Snõbli, I., Crack width variation within the concrete cover of reinforced concrete members. Journal of SZTE, Építöanyag (2010) 62, 3, pp. 70-74.
30. eff on crack widths. Stuctural Concrete (2004) 2, pp. 71-83.
31. eff on crack widths. Discussion, Stuctural Concrete (2005) 4, pp. 155-165
32. Broms, B. B., Technique for Investigation of Internal Cracks in Reinforced Concrete Members. ACI Journal Jan 1965, 62, 1, pp. 35-43.
33. Broms, B. B., Lutz, L. A., Effects of Arrangement of Reinforcement on Crack Width and Spacing of Reinforced Concrete Members. ACI Journal, Proc. (1965) 62, 11, pp. 1395-1410.
34. s, ef and stirrup spacing-an experimental and theoretical study. Structural Concrete Journal (2013) 1, pp. 69-78.
35. Rossi, P., Ulm, F.-J., Chauvel, D., Schaller, I., De Larrard, F., Guerrier, F.: Minimum reinforcement and durability in nuclear power plant cooling towers (Ferraillage minimum et durabilité dans les aéroréfrigérants de centrale nucléaire). LCPC, Études et Recherches des Laboratoires des Ponts et Chaussées, série Ouvrages d'art, No. OA 38/2001 (in French).
36. Ulm, F.-J., Rossi, P., Schaller, I., Chauvel, D., Durability scaling of cracking in HPC-structures subject to hygromechanical gradients. Journal of Structural Engineering, ASCE Jun 1999, 1256, pp. 693-702.
37. Balázs, G. L., Fatigue of Bond. ACI Materials Journal Nov-Dec 1991, pp. 620-629.
38. Ferry-Borges, J.: Cracking and deformability of Reinforced Cocrete Beams. IABSE pub., Zurich, 1966, vol. 26, pp. 75-79.
39. Lutz, L. A., Gergely, P., Mechanics of Bond and Slip of Deformed Bars in Concrete. ACI Journal (1967) 6411, pp. 711-721.
40. Gergely, P., Lutz, L. A.: Maximum Crack Width in Reinforced Flexural Members, Causes, Mechanism and Control of Cracking in Concrete. ACI SP-20, 1968, pp. 87-117
41. Edwards, A. D., Picard, A., Theory of Cracking in Concrete Beams. Proc. ASCE Journal of Structural Division ST12 Dec 1972, 98, pp. 2687-2700.
42. Beeby, A. W., The prediction of crack width in hardened concrete. The Structural Engineer (1979) 57A, 1, vpp. 9-17.
43. Martin, H, Schießl, P., Schwarzkopf, M.: Ableitung eines allgemeingültiges Berechnungsverfahren für Rißbreiten aus Lastbeanspruchung auf der Grundlage von theoretischen Erkenntnissen und Versuchsergebnissen. Forschung Straßenbau und Straßenverkehstechnik, 1980, No. 309, pp. 33-66 (in German).
44. Giuriani, E.: On the effective stiffness of a bar in cracked Concrete. Bond in Concrete, Proc., Applied Science Publishers, London 1982, pp. 107-126.
45. Noakowski, P., Verbundorientierte, kontinuierliche Theorie zur Ermittlung der Rissbreite. Beton- und Stahlbetonbau 7, 1985, 185-190. 8, 1985, 215-221 (in German).
46. ACI: Cracking of Concrete Members in Direct Tension. ACI Committee 224, ACI Journal Jan-Feb 1986 224, pp. 3-13
47. Janovic, K.: Zur Rißbildung im Stahlbeton- und Spannbetonbau. Beton+Fertigteil-Technik, 1986/12, pp. 161-169 (in German).
48. Balázs G. L.: Bond Model with Non-linear Bond-Slip Law, Studi e Ricerche (periodical of post-graduate school on design of reinforced and prestressed concrete structures-Fratelli Pesenti, Politecnico di Milano, Italia), vol. 9, 1987, pp.157-180.
49. Oh, B. H., Kang, Y. H., New Formulas for Maximum Crack Width and Crack Spacing in Reinforced Concrete Flexural Member. ACI Structural Journal (1987 Mar-Apr, pp. 103-112.
50. König, G., Fehling, E., Zur Rißbreitenbeschränkung im Stahlbetonbau. Beton- und Stahlbetonbau 6, (1988), 161-167. 7, 199-204 (in German).
51. Balázs, G. L., Cracking Analysis Based on Slips and Bond Stresses. ACI Materials Journal Jul-Aug 1993, 90, 4, pp. 340-348.
52. König, G., Tue, N. V.: Grundlagen und Bemessungshilfen für die Rißbreitenbeschränkung im Stahlbeton und Spannbeton sowie Kommentare, Hintergrundinformationen und Anwendungsbeispiele zu den Regelungen nach DIN 1045, EC2 und Model Code 90. Deutscher Ausschuss für Stahlbeton, No. 466, 1996, 55pp. (in German).
53. Martin, P., Alvarez, M., Kaufmann, W., Sigrist, V., Tension Chord Model for Structural Concrete. Stuctural Engeneering International (1998) 4, pp. 287-298.
54. Debernardi, P. G., Guiglia, M., Taliano, M.: Effect of Secondary Cracks for the Cracking Analysis of an R.C. Tie. ACI Materials Journal, ISSN 0889-325X (in press)
55. Debernardi, P. G., Guiglia, M., Taliano, M.: Modelling of the cracking behaviour of prestressed concrete structures. Proc. vol. 1, Czech Concrete Society (CS), Concrete engineering for excellence and efficiency, fib Symposium Prague 8-10 Jun 2011, pp. 211-214, ISBN 9788087158296
56. Borosnyõi, A., Balázs, G. L., Models for flexural cracking in concrete: the state of the art. Stuctural Concrete Journal (2005) 2, pp. 53-62.
57. Taliano, M., The improved n-method for the calculation of stresses in service. Structural Concrete (2009) 10, 3-13, ISSN 1464-4177.
58. Müller, H. S., Anders, I., Breiner, R., Vogel, M.: Concrete: treatment of types and properties in MC 2010. Structural Concrete Journal, 2013, DOI 10.1002/suco.201200048 (in press)
59. AASHTO. AASHTO LRFD bridge design specification. Amer. Assoc. of State Highway & Transportation Officials (AASHTO), Washington, DC, 2004.
60. fib. Long term serviceability observations of concrete structures. fib Bulletin (in preparation)
61. Chiorino, M. A., Sassone, M.: Further considerations and updates on time-dependent analysis of concrete structures. fib Bulletin 52, Textbook, vol. 2, section 4.1.6, Lausanne, 201
62. Chiorino, M. A., Carreira, D.: Factors affecting creep and shrinkage of hardened concrete and guide for modelling-A state-of-the-art report on international recommendations and scientific debate. The Indian Concrete Journal, Dec 2012, pp. 11-24
63. Chiorino, M. A., Casalegno, C., Evaluation of the structural response to the time-dependent behaviour of concrete. Part 1-An internationally harmonized format. The Indian Concrete Journal, Dec 2012, pp. 25-38.
64. Sassone, M., Casalegno, C.: Evaluation of the structural response to the time-dependent behaviour of concrete. Part 2-A general computational approach. The Indian Concrete Journal, Dec 2012, pp. 39-54
65. ACI 209.3R-XX, Analysis of Creep and Shrinkage Effects on Concrete Structures, Chiorino M. A. (chair of ed. team), ACI Committee 209, final draft, Mar 2011, 228 pp
66. Corres Peiretti, H., Pérez Caldentey, A., Lõpez Agüí, J. C., Edtbauer, J.: PrEN Chapter 7-Serviceability Limit States. Deflections. Supporting Documents, ETSICCP-UPM. Madrid, 2003. http://hormigon.mecanica.upm.es/files/PDF/SD-Deflections.pdf (also published as part of EC2 Commentary, ed. by European Concrete Platform)
67. Debernardi, P. G., Taliano, M., Span-to-height ratio limits for prestressed concrete members. Structural Concrete Journal (2010) 11, pp. 35-43, ISSN 1464-417.
68. Vollum, R. L., Comparison of deflection calculations and span-to-depth ratios in BS 8110 and Eurocode 2. Magazine of Concrete Research (2009) 61, pp. 465-476, ISSN 0024-9831.
69. CEB: CEB Design Manual Cracking and Deformations. CEB Bulletin d'Information No. 158, Lausanne, 1985
70. Ghali, A., Favre, R., Elbadry, M.: Concrete Structures: Stresses and Deformations-Analysis and Design for Sustainability, 4th ed., Spon Press, London/New York, 2011, 663pp, www.sponpress.com/concretestructures.
71. Debernardi, P. G., Behaviour of concrete structures in service. Journal of Structural Engineering (1989) 116, pp. 32-50.
72. Marí, A. R., Bairán, J. M., Duarte, N: Long-term deflections in cracked reinforced concrete flexural members. Engineering Structures, vol. 32, Elsevier, 2010, pp. 829-842
73. Debernardi, P. G.: Strutture di calcestruzzo armato precompresso. Celid, 408pp., 2012, ISBN 978-88-7661-936-6.
74. Marí, A.: Numerical simulation of the segmental construction of three dimensional concrete frames. Engineering Structures 22 (2000), pp. 585-596
75. Cervenka, J., Cervenka, V., Janda, Z.: Safety assessment in fracture analysis of concrete structures. Proc., Fracture Mechanics of Concrete Structures, ISBN 978-0-415-44616-7, pp. 1043-1049
76. Cervenka, V., Reliability-based non-linear analisis according to fib Model Code 2010. Structural Concrete Journal (2013) 1, pp. 19-28.
77. Gribniak, V., Kaklauskas, G., Kwan, A. K. H., Bacinskas, D., Ulbinas, D., Deriving stress-strain relationships for steel fibre concrete in tension from tests of beams with ordinary reinforcement. Engineering Structures (2012) 42, pp. 387-395.
78. Gribniak, V., Cervenka, V., Kaklauskas, G.: Deflection prediction of reinforced concrete beams by design codes and computer simulation. Engineering Structures, 2012 (under revision)
79. Kaklauskas, G., Flexural layered deformational model of reinforced concrete members. Magazine of Concrete Research (2004) 5610, pp. 575-584.
80. Kaklauskas, G., Gribniak, V., Girdzius, R., Average stress-average strain tension-stiffening relationships based on provisions of design codes. Journal of Zhejiang University SCIENCE A (2011) 1210, pp. 731-736.
81. Cervenka, V.: Computer simulation of failure of concrete structures for practice. 1st fib Congress 2002, Concrete Structures in 21st Century, Osaka, Japan, keynote lecture in session 13, pp. 289-304
82. Kaklauskas, G., Gribniak, V., Bacinskas, D., Vainiunas, P., Shrinkage influence on tension stiffening in concrete members. Engineering Structures (2009) 31, 6, pp. 1305-1312.
83. Kaklauskas, G., Gribniak, V., Eliminating shrinkage effect from moment-curvature and tension-stiffening relationships of reinforced concrete members, ASCE Journal of Structural Engineering (2011) 137, 12, pp. 1460-1469
84. Demilecamps, L.: Reliable Shrinkage and Crack Design: CEOS.FR French national Research Program, Experimental Aspects, electronic proc., fib Congress, Washington, 2010.
85. Toutlemonde, F., Torrenti, J.-M.: Crack Control of Mass Concrete and Related Issues concerning Early-Age of Concrete Structures. RILEM Proceedings PRO85, Paris, 2012, 223pp
86. Rospars, C., Chauvel, D.: Control of cracking in RC Structures: a major step toward serviceability. Collection of Etudes et Recherches des Laboratoires des Ponts at Chaussées, 201
87. Sakai. K.: Sustainability in fib Model Code 2010 and its future perspective, Structural Concrete, DOI 10.1002/suco.201300012 (in press)