The influence of the rotor on surge pd testing of low voltage AC motor stator windings

IEEE Transactions on Dielectrics and Electrical Insulation

Volumn 20, Issue 3, 2013, Pages 762-769

  Kang, Tae June ^a   Hong, Jongman ^a   Lee, Sang Bin ^a   Yoon, Young Woo ^b   Hwang, Don Ha ^b   Kang, Dongsik ^b  

^a Korea University   (South Korea)

^b Korea Electrotechnology Research Institute (KERI)   (South Korea)

Author keywords

AC machines; impulse testing; monitoring; partial discharges (PD); rotating machine insulation testing; Surges

Indexed keywords

AC MACHINE; INVERTER FED MOTORS; PD INCEPTION VOLTAGE; PERMANENT MAGNET SYNCHRONOUS MOTORS; ROTATING MACHINE INSULATION; STATOR INSULATION SYSTEMS; STATOR WINDING FAILURE; SURGES;

AC GENERATOR MOTORS; ACCEPTANCE TESTS; ELECTRIC MACHINE INSULATION; IMPULSE TESTING; MONITORING; PARTIAL DISCHARGES; PERMANENT MAGNETS; STATORS; SYNCHRONOUS MOTORS; WINDING;

ROTORS (WINDINGS);

EID: 84878503811     PISSN: 10709878     EISSN: None     Source Type: Journal    
DOI: 10.1109/TDEI.2013.6518946     Document Type: Article

References (21)

1. G.C. Stone, E.A. Boulter, I. Culbert, and H. Dhirani, Electrical Insulation for Rotating Machines - Design, Evaluation, Aging, Testing, and Repair, IEEE Press Series on Power Eng., John Wiley & Sons, 2004.
2. M. Kaufhold, G. Boerner, M. Eberhardt, and J. Speck, "Failure mechanism of the interturn insulation of low voltage electric machines fed by pulse-controlled inverters", IEEE Electr. Insul. Mag., Vol. 12, No. 5, pp. 9-16, 1996. (Pubitemid 126541648)
3. W. Yin, "Failure mechanism of winding insulations in inverter-fed motors", IEEE Electr. Insul. Mag., Vol. 13, No. 6, pp. 18-23, Nov./Dec. 1997. (Pubitemid 127608640)
4. C. Lanier, "Using corona inception voltage for motor evaluation", IEEE Ind. Appl. Mag., Vol. 5, No. 4, pp. 48-54, 1999.
5. G.C. Stone, S. Campbell, and S. Tetreault, "Inverter-fed drives: which motors are at risk?" IEEE Ind. Appl. Mag., Vol. 6, No. 5, pp. 17-22, 2000.
6. Evaluation of qualification of electrical insulating systems used in rotating electrical machines when fed from voltage converters, IEC TS 60034-18-41, 2006.
7. Electrical insulating materials and systems - electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses, IEC TS 61934, 2006.
8. I. Culbert, B. Lloyd and G.C. Stone, "Stator insulation problems caused by variable speed drives", Proc. of Petroleum and Chemical Industry Committee Europe, pp. 187-192, 2009. (Pubitemid 350141374)
9. M.K.W. Stranges, G.C. Stone, and D.L. Bogh, "New specs for ASD motors - exploring the IEC 60034-18-41 and the IEC 60034-18-42 technical specifications for inverter duty motor insulation", IEEE Ind. Appl. Mag., Vol. 13, No. 1, pp. 37-42, 2007.
10. D. Bogh, J. Coffee, G. Stone, and J. Custodio, "Partial-discharge- inception testing on low-voltage motors", IEEE Trans. on Ind. Appl., Vol. 42, No. 1, pp. 148-154, 2006. (Pubitemid 43204781)
11. G. Stone, and I. Culbert, "Partial discharge testing of random wound stators during short risetime voltage surges", IEEE Electr. Insul. Conf., pp. 188-191, 2009.
12. S. Ul Haq, S.H. Jarayam, and E.A. Cherney, "Insulation problems in medium-voltage stator coils under fast repetitive voltage pulses", IEEE Trans. on Ind. Appl., Vol. 44, No. 4, pp. 1004-1012, 2008.
13. J. Yang, T. Kang, B. Kim, S.B. Lee, Y. Yoon, D. Kang, J. Cho, H. Kim, "Experimental Evaluation of Using the Surge PD Test as a Predictive Maintenance Tool for Monitoring Turn Insulation Quality in Random Wound AC Motor Stator Windings", IEEE Trans. Dielectr. Electr. Insul., Vol. 19, No. 1, pp. 53-60, 2012.
14. A. Cavallini, E. Lindell, G.C. Montanari, and M. Tozzi, "Off-line PD testing of converter-fed wire-wound motors: why IEC TS 60034-18-41 may fail?", IEEE Trans. Dielectr. Electr. Insul., Vol. 17, No. 5, pp. 1385- 1395, Oct. 2010.
15. M. Tozzi, A. Cavallini, and G.C. Montanari, "Monitoring off-line and online PD under impulsive voltage on induction motors - part 1: standard procedure", IEEE Electr. Insul. Mag., Vol. 26, No. 4, pp. 16-26, 2010.
16. M. Tozzi, A. Cavallini and G.C. Montanari, "Monitoring off-line and online PD under impulsive voltage on induction motors - Part 3: Criticality", IEEE Electr. Insul. Mag., Vol. 27, No. 4, pp. 26-33, July/Aug. 2011.
17. J. Wilson, "Current state of surge testing induction machines", Iris Rotating Machine Conference, pp.1-13, 2003.
18. J.L. Guardado, and K.J. Cornick, "Calculation of machine winding electrical parameters at high frequencies for switching transients studies", IEEE Trans. Ener. Conv., Vol. 11, No. 1, pp. 33-40, 1996. (Pubitemid 126776184)
19. Y. Tang, "Analysis of Steep-Fronted Voltage Distribution and Turn Insulation Failure in Inverter-Fed Form-Wound AC Motor", IEEE Trans. Ind. Appl., Vol. 34, No. 5, pp. 1088-1096, 1998. (Pubitemid 128740251)
20. G. Suresh, H.A. Toliyat, D.A. Rendusara, and P.N. Enjeti, Senior Member, IEEE, "Predicting the transient effects of PWM voltage waveform on the stator windings of random wound induction motors," IEEE Trans. Power Electronics, Vol. 14, No. 1, pp. 23-30, 1999.
21. F. Perisse, P. Werynski, and D. Roger, "A New Method for AC Machine Turn Insulation Diagnostic Based on High Frequency Resonances," IEEE Trans. Dielectr. Electr. Insul., Vol. 14, No. 5, pp.1308-1315, 2007.