Industrial applications of electron accelerators

CAS 2005 - CERN Accelerator School: Small Accelerators, Proceedings

Volumn , Issue , 2006, Pages 383-416

  Cleland, M R ^a  

^a Ion Beam Applications   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BENEFICIAL EFFECTS; BIOLOGICAL PROPERTIES; COMMERCIAL PRODUCTS; ELECTRON ENERGIES; EMERGING APPLICATIONS; HIGH-POWER ELECTRON BEAMS; RADIATION PROCESSING; SINGLE-USE MEDICAL DEVICE;

BIOMEDICAL EQUIPMENT; GAMMA RAYS; INDUSTRIAL APPLICATIONS; INDUSTRIAL WASTE TREATMENT; IONIZING RADIATION; PARTICLE ACCELERATORS; PLASMA ACCELERATORS; RADIATION EFFECTS; THERMAL PROCESSING (FOODS);

ACCELERATION;

EID: 84878260813     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (142)

1. W.L. McLaughlin, et al Dosimetry for Radiation Processing, Taylor & Francis, New York (1989).
2. A. Charlesby, Atomic Radiations and Polymers, Pergamon Press, London (1960).
3. A. Charlesby, Use of High Energy Radiation for Crosslinking and Degradation, Radiat. Phys. Chem. Vol. 9, Nos. 1-3 (1977) 17-29.
4. A. Chapiro, Radiation Chemistry of Polymeric Systems, Interscience Publishers, John Wiley & Sons, New York (1962).
5. J. Silverman, Basic Concepts of Radiation Processing, Radiat. Phys. Chem. Vol. 9, Nos. 1-3 (1977) 1-15.
6. J. Silverman, Radiation Processing: The Industrial Applications of Radiation Chemistry, J. Chem. Ed. Vol. 58, No. 2 (1981) 168-173.
7. M.R. Cleland, Radiation Processing: Basic Concepts and Practical Aspects, J. Ind. Rad. Tech., Vol. 1, No. 3 (1983) 191-218.
8. Proceedings of the thirteen International Meetings on Radiation Processing, Rad. Phys. Chem., Pergamon, Elsevier Science, Inc., Tarrytown, New York, Vols. 9, 14, 18, 22, 25, 31, 35, 42, 46, 52, 57, 63, 71 (1977-2004).
9. Proceedings of the five International Conferences on Ionizing Radiation and Polymers (IRaP), Nucl. Instr. Meth. Phys. Res., Section B, Beam Interactions with Materials and Atoms (NIMB), North-Holland, Elsevier Science, Amsterdam, Vol. 105 (1995), Vol. 131 (1997), Vol. 151 (1999), Vol. 185 (2001) and Vol. 208 (2003).
10. Proceedings of the two Pacifichem Symposia on Polymer Radiation Chemistry, Rad. Phys. Chem., Pergamon, Elsevier Science, Inc., Tarrytown, New York, Vol. 48, No. 5 (1996) and Vol. 61, No. 1 (2001).
11. J.W.T. Spinks and R.J. Woods, An Introduction to Radiation Chemistry, John Wiley & Sons, Inc., New York (1964).
12. M. Dole (ed.), The Radiation Chemistry of Macromolecules, Academic Press, New York, Vol. I (1972), Vol. II (1973).
13. R. Bradley, Radiation Technology Handbook, Marcel Dekker, Inc., New York (1984).
14. J.H. Bly, Electron Beam Processing, International Information Associates, Yardley, PA (1988).
15. Y. Tabata, Y. Ito and S. Tagawa (eds.), Handbook of Radiation Chemistry, CRC Press, Boca Raton, Florida (1991).
16. A. Singh and J. Silverman (eds.), Radiation Processing of Polymers, Hanser, Munich (1992).
17. R.J. Woods and A.K. Pikaev, Applied Radiation Chemistry: Radiation Processing, Wiley, New York (1994).
18. R. Clough and S. Shalaby (eds.), Irradiation of Polymers: Fundamentals and Technological Applications, ACS Books, Washington, D.C. (1996).
19. University of Notre Dame Web Site: Go to www.nd.edu, Search for Radiation Laboratory, Select Radiation Chem. Data Center, Select Recent Papers in Radiation Chemistry and Photochemistry.
20. A. Zyball, Radiation Processing of Polymers, in Emerging Applications of Radiation Processing for the 21st Century, Report from a Technical Meeting Held at the International Atomic Energy Agency (IAEA), Vienna, Austria (2003) 134-142.
21. S.V. Nablo and E.P. Tripp, Low-Energy Electron Process Applications, Radiat. Phys. Chem. Vol. 9, Nos. 1-3 (1977) 325-352.
22. W.A. Frutiger and S.V. Nablo, Performance Characteristics of High Power, Multiple Gun, Electrocurtains, Radiat. Phys. Chem. Vol. 22, Nos. 3-5 (1983) 431-440.
23. C.B. Saunders, et al, Electron Curing of Fibre-Reinforced Composites: An Industrial Application for High-Energy Accelerators, Radiat. Phys. Chem. Vol. 46, Nos. 4-6 (1995) 991-994.
24. A.J. Berejka and C. Eberle, Electron Beam Curing of Composites in North America, Radiat. Phys. Chem, Vol. 63, Nos. 3-6 (2002) 551-556.
25. A.J. Berejka, et al, X-Ray Curing of Composite Materials, in Proceedings of the CAARI 2004 Conference, Nucl. Instr. Meth. Phys. Res., Section B, Beam Interactions with Materials and Atoms (NIMB), North-Holland, Elsevier Science, Amsterdam (2005).
26. A. Chapiro, Radiation Induced Grafting, Radiat. Phys. Chem. Vol. 9, Nos. 1-3 (1977) 55-67.
27. J.L. Garnett, Grafting, Radiat. Phys. Chem. Vol. 14, Nos. 1-2 (1979) 79-99.
28. F. Hu, S. Cheng and P. Peng, Studies on Hydrophilic Functional Polymer Membranes Prepared by Radiation Grafting of Acrylonitrile, in Proceedings of the 8th International Conference on Radiation Processing of Polymer Materials, Beijing (1992).
29. A. Chapiro, A Worldwide View of Radiation Processing, Radiat. Phys. Chem. Vol. 22, Nos. 1-2 (1983) 7-10.
30. A.S. Hoffman, Applications of Radiation Processing in Biomedical Engineering - A Review of the Preparation and Properties of Novel Biomaterials, Radiat. Phys. Chem, Vol. 9, Nos. 1-3 (1977) 207-219.
31. K. Dawes and L.C. Glover, Effects of Electron Beam and γ-Irradiation on Polymeric Materials, Chapter 41 in Physical Properties of Polymers Handbook, James E. Mark (ed.), AIP Press, American Institute of Physics, Woodbury, New York (1996).
32. L.D. Loan, Applications of Radiation Processing in the Wire and Cable Field, Radiat. Phys. Chem. Vol. 9, Nos. 1-3 (1977) 253-259.
33. E.W. Bennett, Jr., Applications of Irradiation to Industrial Wires and Cables, Radiat. Phys. Chem. Vol. 14, Nos. 3-6 (1979) 947-951.
34. P.G. Goavec, Plastic Materials and Acome's Use of High Energy Electron Processing in France, Radiat. Phys. Chem. Vol. 14, Nos. 1-2 (1979) 61-67.
35. S. Ota, Current Status of Irradiated Heat-Shrinkable Tubing in Japan, Radiat. Phys. Chem. Vol. 18, Nos. 1-2 (1981) 81-87.
36. W.G. Baird, Jr., Applications in Plastic Sheet and Film, Radiat. Phys. Chem. Vol. 9, Nos. 1-3 (1977) 225-233.
37. J.D. Hunt and G. Alliger, Rubber - Application of Radiation to Tire Manufacture, Radiat. Phys. Chem. Vol 14, Nos. 1-2 (1979) 39-53.
38. D.A. Trageser, Crosslinked Polyethylene Foam Processes, Radiat. Phys. Chem. Vol. 9, Nos. 1-3 (1977) 261-270.
39. N. Sagane and H. Harayama, Radiation Crosslinked Polyethylene Foam, Radiat. Phys. Chem. Vol. 18, Nos. 1-2 (1981) 99-108.
40. Y. Ikada, et al, Preparation of Hydrogels by Radiation Technique, Radiat. Phys. Chem. Vol. 9, Nos. 4-6 (1977) 633-645.
41. R.L. Derbyshire, Treatment of Sintered Poly-Tetrafluoroethylene with Irradiation and Heat to Produce a Grindable Material, U.S. Patent No. 4,220,511 (1980).
42. W.B. Neuberg and R. Luniewski, Apparatus and Method for Radiation Processing of Materials, U.S. Patent No. 4,748,005 (1988).
43. W.B. Neuberg and R. Luniewski, Apparatus and Method for Radiation Processing of Materials, U.S. Patent No. 4,777,192 (1988).
44. N.W. Neuberg, G. Poszmik and M. Sui, Method of Providing Friable Polytetrafluoroethylene Products, U.S. Patent No. 5,891,573 (1999).
45. T.M. Stepanik, et al, Electron-Processing Technology: A Promising Application for the Viscose Industry, Radiat. Phys. Chem. Vol. 52, Nos. 1-6 (1998) 505-509.
46. M.R. Cleland, et al, A Rhodotron Electron Beam Facility for the Pre-Treatment of Cellulosic Pulp, AIP Conference Proceedings 475, American Institute of Physics, Woodbury, New York (1998) 953-956.
47. D.E. Boynton, Method of Visbreaking Polypropylene, U.S. Patent No. 4,282,076 (1981).
48. S.D. Williams and H.J. Yoo, Radiation Visbroken Polypropylene and Fibers Made Therefrom, U.S. Patent No. 5,804,304 (1998).
49. S.D. Williams, H.J. Yoo and M.R. Drickman, Radiation Visbroken Polypropylene and Fibers Made Therefrom, U.S. Patent No. 5,820,981 (1998).
50. L.B. Sztanyik, Application of Ionizing Radiation to Sterilization, in Technical Developments and Prospects of Sterilization by Ionizing Radiation, in Proceedings of the first Johnson & Johnson conference on radiation sterilization, E.R.L. Gaughran and A.J. Goudie (eds.), Multiscience Publication Ltd., Montréal, Québec, Canada (1974) 6-38.
51. M.R. Cleland, M.T. O'Neill and C.C. Thompson, Sterilization with Accelerated Electrons, Chapter 9 in Sterilization Technology, A Practical Guide for Manufacturers and Users of Health Care Products, R.F. Morrissey and G.B. Phillips (eds.), Van Nostrand Reinhold, New York (1993) 218-253.
52. C.M. Herring and M.C. Saylor, Sterilization with Radioisotopes, Chapter 8 in Sterilization Technology, A Practical Guide for Manufacturers and Users of Health Care Products, R.F. Morrissey and G.B. Phillips (eds.), Van Nostrand Reinhold, New York (1993) 196-217.
53. B.P. Fairand, Radiation Sterilization for Health Care Products, X-Ray, Gamma, and Electron Beam, CRC Press, Boca Raton, Florida (2002).
54. Y. Aikawa, A New Facility for X-Ray Irradiation and Its Application, Radiat. Phys. Chem. Vol. 57, Nos. 3-6 (2000) 609-612.
55. T. Watanabe, Best Use of High-Voltage, High-Powered Electron Beams: A New Approach to Contract Irradiation Services, Radiat. Phys. Chem. Vol. 57, Nos. 3-6 (2000) 635-639.
56. ISO 11137, Sterilization of Health Care Products - Radiation. Part 1, Requirements for the Development, Validation and Routine Control of a Sterilization Process for Medical Devices. Part 2, Establishing the Sterilization Dose. Part 3, Guidance on Dosimetric Aspects. International Organization for Standardization (ISO), 1, rue de Varembé, Case Postale 56, CH-1211, Geneva 20, Switzerland. Web address: www.iso.org. The revised version will be printed in 2006.
57. E.S. Josephson and M.S. Peterson (eds.), Preservation of Food by Ionizing Radiation, CRC Press, Boca Raton, Florida, Vol. I (1982), Vol. II (1983), Vol. III (1983).
58. W.M. Urbain, Food Irradiation, Academic Press, New York (1986).
59. J.F. Diehl, Safety of Irradiated Foods, Second Edition, Marcel Dekker, New York (1995).
60. P. Loaharanu, Irradiated Foods, Fifth Edition, American Council on Science and Health, 1995 Broadway, New York, NY 10023 (2003). Web address, http://www.acsh.org, Select Publications, Select Browse Publications, Select Irradiated Foods, May 1, 2003, Select View PDF Version, Select PDF Document.
61. Food Irradiation Update, Newsletter published by the Minnesota Beef Council, 2950 Metro Drive, Suite 102, Minneapolis, MN 55425 (2005). Web address, http://www.mnbeef.org, Select Food Irradiation, Select Food Irradiation Updates, Select an Issue.
62. Radiation for a Clean Environment, Proceedings of the International Symposium on the Use of High-Level Radiation in Waste Treatment - Status and Prospects, STI/PUB/402, International Atomic Energy Agency (IAEA), Vienna, Austria (1975).
63. A.G. Chmielewski, et al, Industrial Applications of Electron Beam Flue Gas Treatment, Emerging Applications of Radiation Processing for the 21st Century, Report from a Technical Meeting Held at the International Atomic Energy Agency (IAEA), Vienna, Austria (2003) 172-180.
64. A.G. Chmielewski, et al, Industrial Plant for Flue Gas Treatment with High Power Electron Accelerators, AIP Conference Proceedings, Vol. 680, American Institute of Physics, Melville, New York (2003) 873-876.
65. A.G. Chmielewski, et al, Operational Experience of the Industrial Plant for Electron Beam Flue Gas Treatment, Radiat. Phys. Chem. Vol. 71. Issues 1-2 (2004) 441-444.
66. J.G. Trump, E.M. Merrill and K.A. Wright, Disinfection of Sewage Waste Water and Sludge by Electron Treatment, Radiat. Phys. Chem. Vol. 24, No. 1 (1984) 55-66.
67. M.R. Cleland, R.A. Fernald and S.R. Maloof, Electron Beam Process Design for the Treatment of Wastes and Economic Feasibility of the Process, Radiat. Phys. Chem. Vol. 24, No. 1 (1984) 179-190.
68. W.J. Cooper, R.D. Curry and K.E. O'Shea (eds.), Environmental Applications of Ionizing Radiation, John Wiley & Sons, Inc., New York (1998).
69. B. Han, Requirements of Electron Accelerator for Environmental Application, Recent Developments in Electron Accelerator Technology and Applications, IAEA-Internal Report, Consultants' Meeting, Quebec, Canada (2002) 151-165.
70. I.E. Makarov, A. Ponomarev and B. Han, Demonstration Plant for Electron-Beam Treatment of Taegu Dye Industry Complex Wastewater, Emerging Applications of Radiation Processing for the 21st Century, Report from a Technical Meeting Held at the International Atomic Energy Agency (IAEA), Vienna, Austria (2003) 157-171.
71. Cleland, M.R. and Farrell, J.P., Methods for Calculating Energy and Current Requirements for Industrial Electron Beam Processing, in Proceedings of the Fourth Conference on the Scientific & Industrial Applications of Small Accelerators, Institute of Electrical and Electronic Engineers, 76CH 1175-9 NPS, pp. 133-141, 1976.
72. R.C. Becker, et al, Accelerator Requirements for Electron Beam Processing, Radiat. Phys. Chem. Vol. 14, Nos. 3-6 (1979) 353-375.
73. CCC-467/ITS Code Package, 1994. Integrated TIGER Series of coupled electron/photon Monte Carlo transport codes, ITS Version 3.0, Radiation Safety Information Computational Center (RSICC), Oak Ridge, TN 37831, USA.
74. R.A. Galloway, M.R. Cleland and T.F. Lisanti, Technical Information Series TIS-01666, Monte Carlo Calculations of High-Energy Electron Depth-Dose Distributions in Polyethylene, Radiation Dynamics, Inc., Edgewood, NY 11717 (2006).
75. M. Cleland, et al, The Use of Dose and Charge Distributions in Electron Beam Processing, Radiat. Phys. Chem. Vol. 63, Nos. 3-6 (2002) 729-733.
76. ISO/ASTM 51649:2002(E), Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV, Annual Book of ASTM Standards, Vol. 12.02, Nuclear (II), Solar, and Geothermal Energy, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 USA.
77. S.M. Seltzer, J.P. Farrell and J. Silverman, Bremsstrahlung Beams from High-Power Electron Accelerators for Use in Radiation Processing, IEEE Transactions on Nuclear Science, Vol. NS-30, No. 2 (1983) 1629-1632.
78. M.R. Cleland and G.M. Pageau, Comparisons of X-Ray and Gamma-Ray Sources for Industrial Irradiation Processes, Nucl. Instr. Meth. Phys. Res. B 24/ 25 (1987) 967-972.
79. J. Meissner, et al, X-Ray Treatment at 5 MeV and Above, Radiat. Phys. Chem. Vol. 57, Nos. 3-6 (2000) 647-651.
80. M.R. Cleland, Application of High Power X-Ray Generators for Processing Bulk Materials, IAEA-TECDOC-1420, Advances in Radiation Chemistry of Polymers, A.G. Chmielewski (ed.),
81. International Atomic Energy Agency, Vienna, Austria (2004) 111-123.
82. J. Kotler and J. Borsa, Product Irradiator for Optimizing Dose Uniformity in Products, U.S. Patent No. 6,504,898 (2003).
83. F. Stichelbaut, et al, The Palletron™: A High-Dose Uniformity Pallet Irradiator with X-Rays, American Institute of Physics (AIP) Conference Proceedings, Vol. 680 (2003) 891-894.
84. F. Stichelbaut, et al, The Palletron™: A High-Dose Uniformity Pallet Irradiator with X-Rays, Radiat. Phys. Chem. Vol. 71, Issues 1-2 (2004) 291-295.
85. Code of Federal Regulations, Irradiation in the Production, Processing and Handling of Food, Final Rule, Food and Drug Administration, Department of Health and Human Services, 21 CFR Part 179, Docket No. 2003F-0088 (2004) Fed Reg 69(246):76844-76847.
86. J.D. Craggs and J.M. Meek, High Voltage Laboratory Technique, Butterworths Scientific Publications, London (1954).
87. P.M. Lapostolle and A.L. Septier (eds.), Linear Accelerators, North Holland Publishers, Amsterdam (1970).
88. S. Humphries, Jr., Principles of Charged Particle Acceleration, John Wiley & Sons, New York (1986).
89. W. Scharf, Particle Accelerators and Their Uses, Part 1, Accelerator Design, Part 2, Applications of Accelerators, Harwood Academic Publishers, New York (1986).
90. E.A. Abramyan, Industrial Electron Accelerators and Applications, Hemisphere Publishing Corporation, New York (1988).
91. M.R. Cleland, High Power Electron Accelerators for Industrial Radiation Processing, Chapter 3 in Radiation Processing of Polymers, A. Singh and J. Silverman (eds.), Hanser, Munich (1992) 23-49.
92. A.W. Chao and M. Tigner (eds.), Handbook of Accelerator Physics and Engineering, World Scientific Publishing, River Edge, NJ 07661, USA, 2nd Printing (2002), M.R. Cleland, Section 1.6.7, High Voltage Electrodynamic Accelerators, 20-22.
93. M.R. Cleland and L.A. Parks, Medium and High Energy Electron Beam Radiation Processing Equipment for Commercial Applications, Proceedings of the International Conference on Ionizing Radiation and Polymers (IRaP), Nucl. Instr. Meth. Phys. Res., Section B, Beam Interactions with Materials and Atoms (NIMB), North-Holland, Elsevier Science, Amsterdam, Vol. 208 (2003) 74-89.
94. Proceedings of the Eighteen International Conferences on the Application of Accelerators in Research and Industry, U.S. Department of Energy (DOE), Washington, D.C. (1968-1974),
95. Institute of Electrical and Electronics Engineers (IEEE), New York (1976-1983),
96. Nuclear Instruments and Methods in Physics Research, Section B (NIMB), North-Holland, Elsevier Science, Amsterdam (1985-1995),
97. American Institute of Physics, AIP Conference Proceedings (1997-2003),
98. Nuclear Instruments and Methods in Physics Research, Section B (NIMB) (2005).
99. B.S. Quintal, Apparatus for and Method of Producing an Energetic Electron Curtain, U.S. Patent No. 3,702,412 (1972).
100. T. Avnery, Electron Beam Accelerator, U.S. Patent No. 5,962,995 (1999).
101. S.R. Farrell, L.J. Demeter and P.G. Woods, Broad Beam Electron Gun, U.S. Patent No. 3,863,163 (1975).
102. R.R. Machlett and J.W. Skehan, Insulating Structure, U.S. Patent No. 2,376,439 (1945).
103. R.J. Van de Graaff, J.G. Trump and W.W. Buchner, Reports on Progress in Physics, Vol. XI, The Physical Society, UK (1948) 1.
104. J.G. Trump and R.W. Cloud, Laminated Envelope Structure for Electron Discharge Devices, U.S. Patent No. 2,460,201 (1949).
105. R.J. Van de Graaff and W.W. Buechner, Apparatus for Generating an Accurately Focused Beam of Charged Particles and for Related Purposes, U.S. Patent No. 2,517,260 (1950).
106. J.G. Trump, Method and Apparatus for Sterilizing by Electron Bombardment, U.S. Patent No. 2,785,313 (1957).
107. M.R. Cleland and P. Farrell, Dynamitrons of the Future, IEEE Transactions on Nuclear Science, Vol. NS-12, No. 3, pp. 227-234, 1965.
108. W.F. Westendorp, High Voltage Apparatus, U.S. Patent No. 2,144,518 (1939).
109. E.E. Charleton, et al, A New Million-Volt X-Ray Outfit, J. Appl. Phys., Vol. 10 (1939) 374-385.
110. J.W. Ranftl, Irradiated Polyethylene - A Case Study in the Economics of Production Use of Electron Beam Radiation, Proceedings of the Conference on Applications of Large Radiation Sources in Industry, Vol. 2, STI/PUB/12, International Atomic Energy Agency, Vienna (1960) 387-396.
111. Yu.P. Vakrushin, V.A. Glukhikh and M.P. Svinjin. Efremov Institute Charged Particle Accelerators for Industry and Medicine, Radiat. Phys. Chem. Vol. 14, Nos. 3-6 (1979) 415-429.
112. R.J. Van de Graaff, High Voltage Electromagnetic Apparatus Having an Insulating Magnetic Core, U.S. Patent No. 3,187,208 (1965).
113. R.M. Emanuelson, Insulating Core Transformers, U.S. Patent No. 3,274,526 (1966).
114. R.A. Salimov, et al, D.C. High Power Electron Accelerators of ELV-series: Status, Development, Applications, Radiat. Phys. Chem. Vol. 57, Nos. 3-6 (2000) 661-665.
115. H. Greinacher, Über eine Methode, Wechselstrom mittels elektrischer Ventile und Kondensatoren in hochgespannten Gleichstrom umzuwandeln, Zeitschrift für Physik, 4 Band (1921) 195-205.
116. A. Bowers and A. Kuntke, Ein Generator für drei Millionen Volt Gleichspannung, Zeitsschrift für Technische Physik, Nr. 8 (1937) 209-219.
117. W. Heilpern, Kaskadengeneratoren zur Partikelbeschleunigung auf 4 MeV, Helvetica Physica Acta, Vol. 28 (1955) 485-491.
118. E. Baldinger and W. Heilpern, Kompensations-Drosselspulen hoher Güte für Kaskadengeneratoren, Helvetica Physica Acta, Vol. 30 (1957) 282-287.
119. J. Seitz, G. Reinhold and R. Minkner, Ein symmetrischer 4-MV-Kaskadengleichrichter zur Speisung eines Ionenbeschleunigers, Helvetica Physica Acta, Vol. 33 (1960) 977-983.
120. G. Reinhold, K. Truempy and J. Bill, The Symmetrical Cascade Rectifier - An Accelerator Power Supply in the Megavolt and Milliampere Range, IEEE Transactions on Nuclear Science, NS-12, No. 3 (1965) 288-292.
121. K. Mizusawa, et al, Current Status of Electron Processing System for Industrial Use in Japan and Asian Countries, Radiat. Phys. Chem., Vol. 31, Nos. 1-3 (1988) 267-271.
122. S. Uehara, et al, A 5 MV 30 mA EB/X-Ray Processing System, Radiat. Phys. Chem., Vol. 42, Nos. 1-3 (1993) 515-518.
123. M. Schenkel, Eine neue Schaltung für die Erzeugung hoher Gleichspannungen, Elektrotechnische Zeitschrift, Vol. 40 (1919) 333-334.
124. O.H. Schade, Voltage Multiplier Circuit, U.S. Patent No. 2,072,278 (1937).
125. R.A. Galloway, et al, The New IBA Self-Shielded Dynamitron Accelerator for Industrial Applications, Radiat. Phys. Chem. (2004) 283-285.
126. R.A. Galloway, T.F. Lisanti and M.R. Cleland, A New 5 MeV-300 kW Dynamitron for Radiation Processing, Radiat. Phys. Chem. Vol. 71, Issues 1-2 (2004) 551-553.
127. M.R. Cleland, Voltage Multiplication Apparatus, U.S. Patent No. 2,875,394 (1959).
128. T. Sadat, Progress Report on Linear Accelerators, Radiat. Phys. Chem. Vol. 35, Nos. 4-6 (1990) 616-618.
129. K. Whitham, et al, Titan Scan TB 10/15 Operating Performance, 14th International Conference on Application of Accelerators in Research and Industry, AIP Conference Prodeedings 392, American Institute of Physics (1997) 1089-1091.
130. Y. Kamino, 10 MeV 25 kW Industrial Electron Linac, Radiat. Phys. Chem. Vol. 52, Nos. 1-6 (1998) 469-473.
131. G.E. Hare, IMPELA Electron Accelerators for Industrial Radiation Processing, Radiat. Phys. Chem. Vol. 35, Nos. 4-6 (1990) 619-626.
132. J. McKeown, et al, Industrial Material Processing Electron Linear Accelerator, U.S. Patent No. 5,401,973 (1995).
133. J. McKeown, et al, Industrial Material Processing Electron Linear Accelerator, U.S. Patent No. 5,434,420 (1995).
134. R.B. Miller, et al, A High-Power Electron Linear Accelerator for Food Irradiation Applications, Nucl. Instr. and Meth. B Vol. 211, No. 4 (2003) 562-570.
135. V.L. Auslender and I.N. Meshkov, Powerful Single-Cavity RF Accelerators and Their Use in the Industrial Radiation Chemical Processing Lines, Radiat. Phys. Chem. Vol. 35, Nos. 4-6 (1990) 627-631.
136. V.L. Auslender, et al, Accelerators for E-Beam and X-Ray Processing, Radiat. Phys. Chem. Vol. 63, Nos. 3-6 (2002) 613-615.
137. V.L. Auslender, et al, Radio-Frequency Electron Accelerator, U.S. Patent No. 4,140,942 (1979).
138. J. Pottier, A New Type of RF Electron Accelerator: the Rhodotron, Nucl. Inst. and Meth. in Phys. Research, B 40/ 41 (1989) 943-945.
139. A. N'Guyen and J. Pottier, Electron Accelerator with Coaxial Cavity, U.S. Patent No. 5,107,221 (1992).
140. D. Defrise, et al, Technical Status of the First Industrial Unit of the 10 MeV, 100 kW Rhodotron, Radiat. Phys. Chem., Vol. 46, Nos. 4-6 (1995) 473-476.
141. Y. Jongen, et al, Advances in Sterilization with X-Rays, Using a Very High Power Rhodotron and a Very Low DUR Pallet Irradiator, Emerging Applications of Radiation Processing, Proceedings of a Technical Meeting Held at the International Atomic Energy Agency (IAEA), Vienna, Austria (2003) 44-54.
142. M. Abs, et al, The IBA Rhodotron TT1000: A Very High Power E-Beam Accelerator, Radiat. Phys. Chem. Vol. 71, Issues 1-2 (2004) 287-290.