Chemical composition and efficiency of bio-oil obtained from giant cane (arundo donax l.) as a wood preservative

BioResources

Volumn 8, Issue 2, 2013, Pages 2084-2098

  Temiz, Ali ^a   Akbas, Selcuk ^b   Panov, Dmitri ^c   Terziev, Nasko ^d   Alma, M Hakki ^e   Parlak, Salih ^f   Kose, Gaye ^a  

^a KARADENIZ TECHNICAL UNIVERSITY   (Turkey)

^b ARTVIN CORUH UNIVERSITY   (Turkey)

^c UNIVERSITY OF TARTU   (Estonia)

^d SWEDISH UNIVERSITY OF AGRICULTURAL SCIENCES   (Sweden)

^e KAHRAMANMARAS SUTCU IMAM UNIVERSITY   (Turkey)

^f Aegean Forestry Research Institute   (Turkey)

Author keywords

Decay and termite resistance; Giant cane; Pyrolysis; Scots pine; Water absorption.

Indexed keywords

BIOFUELS; CHEMICAL COMPOUNDS; DRYING OILS; DURABILITY; FORESTRY; FUNGI; KETONES; OILSEEDS; PROTECTIVE COATINGS; PYROLYSIS; TERMITE RESISTANCE; WATER TREATMENT; WOOD PRESERVATION;

BROWN ROT FUNGI; CHEMICAL COMPOSITIONS; EPOXIDIZED LINSEED OIL; EUROPEAN STANDARDS; GIANT CANE; LEACHABILITY; SCOTS PINE; WOOD PRESERVATIVES;

WATER ABSORPTION;

EID: 84877960924     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.8.2.2084-2098     Document Type: Article

References (37)

1. ASTM (1992). "D1744: Standard test method for determination of water in liquid petroleum products by Karl Fischer Reagent," ASTM International, West Conshohocken, PA, USA.
2. Atchison, J. E. (1993). "Data on non-wood plant fibres," Pulp and Paper Manufacture, Vol. 3: Secondary Fibres and Non-Wood Pulping, M. J. Kocurek (ed.), TAPPI, 4.
3. AWPA (2008). "E4: Standard method of testing water repellency of pressure treated wood," American Wood Protection Association Standard.
4. AWPA (2008). "E11: Standard method of determining the leachability of wood preservatives," American Wood Protection Association Standard. Azeez, A. M., Meier, D., Odermatt, J., and Willner, T. (2010). "Fast pyrolysis of African and European lignocellulosic biomasses using Py-GC/MS and fluidized bed reactor," Energy Fuels.
5. Azeez, A. M., Meier, D., Odermatt, J., and Willner, T. (2010). "Fast pyrolysis of African and European lignocellulosic biomasses using Py-GC/MS and fluidized bed reactor," Energy Fuels.
6. Demirbas, A. (2004). "Effect of initial moisture content on the yields of oily products from pyrolysis of biomass," J. Anal. Appl. Pyrolysis 71, 803-815.
7. DIN (1997). "51562: Determination of the kinematic viscosity using the standard design Ubbelohde viscometer."
8. Dobele, G., Urbanovich, I., Volpert, A., Kampars, V., and Samulis, E. (2007). "Fast pyrolysis-effect of wood drying on the yield and properties of bio-oil," BioResources 2(4), 699-706.
9. European Standard (1996). "EN 113: Determination of the toxic values against wood destroying basidiomycetes cultured on agar medium," European Standard.
10. Ertas, M., and Alma, M. H. (2010). "Pyrolysis of laurel (Laurus nobilis L.) extraction residues in a fixed-bed reactor: Characterization of bio-oil and bio-char," J. Anal. Appl. Pyrolysis 88, 22-29.
11. Gallego, E., Roca, F. J., Perales, J. F., Guardino, X., and Berenguer, M. J. (2008). "VOCs and PAHs emissions from creosote-treated wood in a field storage area," Sci. Total Environ. 402, 130-138.
12. Gezer, E. D., Yildiz, U. C., Temiz, A., Yildiz, S., and Dizman, E. (2005). "Cu, Cr and As distribution in soils adjacent to CCA-treated utility poles in eastern Black Sea Region of Turkey," Build. Environ. 40(12), 1684-1688.
13. Gonzalez, J. F., Ramiro, A., Gonzalez-Garcia, C. M., Ganan, J., Encinar, J. M., Sabio, E., and Rubiales, J. (2005). "Catalyzed pyrolysis of grape and olive bagasse. Influence of catalyst type and chemical treatment," Ind. Eng. Chem. Res. 44(9), 3003-3012.
14. Jeon, Y. J., Xun, Z., and Rogers, P. L. (2010). "Comparative evaluations of cellulosic raw materials for second generation bioethanol production," Lett. Appl. Microbiol. 51(5), 518-524.
15. Kartal, S. N., Imamura. Y., Tsuchiya, F., and Ohsato, K. (2004). "Preliminary evaluation of fungidical and termicidal activities of filtrates from biomass slurry fuel production," Bioresource Technol. 95, 41-47.
16. Kartal, S. N., Terzi, E., Kose, C., Hofmeyr, J., and Imamura, Y. (2010). "Biological performance of wood treated with tar-oil recovered during slow pyrolysis of macadamia nut shells," IRG/WP 10-30524, The International Research Group on Wood Preservation, France.
17. Qiang, L., Yang, X.-L., and Zhu, X.-F. (2008). "Analysis on chemical and physical properties of bio-oil pyrolyzed from rice husk," J. Anal. Appl. Pyrolysis 82(2), 191-198.
18. Mansoor, H., and Ali, R. M. (1992). "Antifungal activity of pyrolytic oils of tar from rubberwood (Hevea brasiliensis) pyrolysis," J. Trop. Forest Sci. 4, 294-302.
19. Mazela, B. (2007). "Fungicidal value of wood tar from pyrolysis of treated wood," Waste Manage. 27, 461-465.
20. Meier, D., Andersons, B., Irbe, I., Chirkova, J., and Faix, O. (2001). "Chapter 128. Preliminary study on fungicide and sorption effects of fast study on fungicide and sorption effects of fast pyrolysis liquids used as wood liquids used as wood preservative," Progress in Thermochemical Biomass Conversion, Blackwell Science Ltd., Oxford, UK.
21. Meier, D., and Faix, O. (1999). "State of the art of applied fast pyrolysis of lignocellulosic materials - A review," Bioresource Technol. 68, 71-77.
22. Mohan, D., Pittman, C. U., and Steele, P. H. (2006). "Pyrolysis of wood/biomass for bio-oil: A critical review," Energy Fuels 20, 848-889.
23. Mohan, D., Shi, J., Nicholas, D. D., Pittman Jr., C. U., Steele, P. H., and Cooper, J. E. (2008). "Fungicidal values of bio-oils and their lignin-rich fractions obtained from wood/bark fast pyrolysis," Chemosphere 71(3), 456-465.
24. Mourant, D., Yang, D.-Q., Lu, X., and Roy, C. (2005). "Anti-fungal properties of the pyroligneous liquor from the pyrolysis of softwood bark," Wood Fiber Sci. 73, 542-548.
25. Mourant, D., Yang, D.-Q., and Roy, C. (2007). "Decay resistance of pyrolytic oil resin-treated wood," Forest Prod. J. 57, 30-35.
26. Panov, D., Terziev, N., and Daniel, G. (2010). "Using plant oils as hydrophobic substances for wood protection," IRG/WP 10-30550, 41st IRG on Wood Protection, May 9-13, Biarritz, France.
27. Rydholm, S. A. (1976). Pulping Processes, Interscience Publishers, New York, Chichester, Brisbane, Toronto.
28. Shatalov, A. A., Quilho, T., and Pereira, H. (2001). "Arundo donax L. reed: New perspectives for pulping and bleaching 1. Raw material characterisation," Tappi Journal Peer Reviewed Paper 84(1).
29. Sunarta, S., Darmadji, P., Uehara, T., and Katoh, S. (2011). "Production and characterization of palm fruit shell bio-oil for wood preservation," Forest Prod. J. 61(2), 180-184.
30. TAPPI (1992). TAPPI Test Methods 1992-1993, Tappi Press Atlanta, Georgia, USA.
31. Temiz, A., Alma, M. H., Terziev, N., Palanti, S., and Feci, E. (2010). "Efficiency of bio-oil against wood destroying organisms," J. Biobased Mater. Bioenergy 4, 1-7.
32. Temiz, A., Panov, D., Terziev, N., and Hafren, J. (2008). "Research on silicones and oils as hidrophobic agents," V. Congreso Nacional De protection De La Madera, San Sebastian, Spain.
33. Temiz, A., Terziev, N., Eikenes, M., and Hafren, J. (2007). "Effect of accelerated weathering on surface chemistry of modified wood," Applied Surf. Sci. 253, 5355-5362.
34. Terziev, N., and Panov, D. (2011). "Plant oils as "green" substances for wood protection," In: Minimising the Environmental Impact of the Forest Products Industries, F. Caldeira, and F. Pessoa (eds.), Porto, Portugal, ISBN 978-989-643-083-2, pp. 143-149
35. Tomak, E. D., Viitanen, H., Yildiz, U. C., and Hughes, M. (2011). "The combined effects of boron and oil heat treatment on the properties of beech and scots pine wood. Part 2: Water absorption, compression strength, color changes, and decay resistance," J. Material Sci. 46, 608-615.
36. Ucar, G., and Balaban, M. (2003). "Hydrolysis of polysaccharides with 77% sulfuric acid for quantitative saccharification," Turk. J. Agric. For. 27, 361-365.
37. Yatagai, M., Nishimoto, M., Hori, K., Ohira, T., and Shibata, A. (2002). "Termiticidal activity of wood vinegar, its components and their homologues," J. Wood Sci. 48(4), 338-342.