Structure and mechanical properties of as-cast Ti-5Nb-xCr alloys

Materials and Design

Volumn 51, Issue , 2013, Pages 268-273

  Hsu, Hsueh Chuan ^a   Wu, Shih Ching ^a   Hsu, Shih Kuang ^a   Lin, Tsung Fu ^b   Ho, Wen Fu ^b  

^a CENTRAL TAIWAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Taiwan)

^b DA YEH UNIVERSITY   (Taiwan)

Author keywords

Mechanical properties; Microstructure; Titanium alloys

Indexed keywords

CHROMIUM; CHROMIUM ALLOYS; ELASTICITY; GERMANIUM ALLOYS; HIGH STRENGTH ALLOYS; MECHANICAL PROPERTIES; MICROSTRUCTURE; NIOBIUM; SCANNING ELECTRON MICROSCOPY; TITANIUM CASTINGS; X RAY DIFFRACTION;

COMMERCIALLY PURE TITANIUMS; DENTAL APPLICATIONS; DIFFERENT STRUCTURE; DUCTILE PROPERTIES; ELASTIC RECOVERY; FRACTURED SURFACES; IMPLANT MATERIALS; THREE-POINT BENDING TEST;

TITANIUM ALLOYS;

EID: 84877827097     PISSN: 02613069     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2013.04.001     Document Type: Article

References (49)

1. Niinomi M. Recent research and development in titanium alloys for biomedical applications and healthcare goods. Sci Tech Adv Mater 2003, 4:445-454.
2. Brunette D.M., Tengvall P., Textor M., Thomsen P. Titanium in Medicine 2001, Springer, New York.
3. Steinemann SG. Titanium - the material of choice?. Periodontology 1998, 17:7-21. 2000.
4. Ohkubo C., Shimura I., Aoki T., Hanatani S., Hosoi T., Hattori M., et al. Wear resistance of experimental Ti-Cu alloys. Biomaterials 2003, 24:3377-3381.
5. Ho W.F., Chiang T.Y., Wu S.C., Hsu H.C. Mechanical properties and deformation behavior of cast binary Ti-Cr alloys. J Alloy Compd 2009, 68:533-538.
6. Ho W.F., Chiang T.Y., Wu S.C., Hsu H.C. Evaluation of low-fusing porcelain bonded to dental cast Ti-Cr alloys. J Alloy Compd 2009, 474:505-509.
7. Hsu H.C., Wu S.C., Chiang T.Y., Ho W.F. Structure and grindability of dental Ti-Cr alloys. J Alloy Compd 2009, 476:817-825.
8. Hsu H.C., Wu S.C., Wang C.F., Ho W.F. Electrochemical behavior of Ti-Cr alloys in artificial saliva. J Alloy Compd 2009, 478:439-444.
9. Ho W.F., Ju C.P., Chern Lin JH. Structure and properties of cast binary Ti-Mo alloys. Biomaterials 1999, 20:2115-2122.
10. Ho W.F. Effect of omega phase on mechanical properties of Ti-Mo alloys for biomedical application. J Med Biol Eng 2008, 28:47-51.
11. Ho WF. A comparison of tensile properties and corrosion behavior of cast Ti-7.5Mo with c.p. Ti, Ti-15Mo and Ti-6Al-4V alloys. J Alloy Compd 2008, 464:580-583.
12. Ho W.F., Wu S.C., Hong Y.S., Hsu H.C. Evaluation of the machinability of Ti-Sn alloys. J Alloy Compd 2010, 502:112-117.
13. Hsu H.C., Lin H.C., Wu S.C., Hong Y.S., Ho W.F. Microstructure and grindability of as-cast Ti-Sn alloys. J Mater Sci 2010, 45:1830-1836.
14. Hsu H.C., Wu S.C., Hong Y.S., Ho W.F. Mechanical properties and deformation behavior of as-cast Ti-Sn alloys. J Alloy Compd 2009, 479:390-394.
15. Ho W.F., Cheng C.H., Chen W.K., Wu S.C., Lin H.C., Hsu H.C. Evaluation of low-fusing porcelain bonded to dental cast Ti-Zr alloys. J Alloy Compd 2009, 471:185-189.
16. Ho W.F., Chen W.K., Wu S.C., Hsu H.C. Structure, mechanical properties and grindability of dental Ti-Zr alloys. J Mater Sci Mater Med 2008, 19:3179-3186.
17. Walker P.R., LeBlanc J., Sikorska M. Effects of aluminum and other cations on the structure of brain and liver chromatin. Biochemistry 1989, 28:3911-3915.
18. Rao S., Ushida T., Tateishi T., Okazaki Y., Asao S. Effect of Ti, Al, and V ions on the relative growth rate of fibroblasts (L929) and osteoblasts (MC3T3-E1) cells. Biomed Mater Eng 1996, 6:79-86.
19. Cheal E., Spector M., Hayes W. Role of loads and prosthesis material properties on the mechanics of the proximal femur after total hip arthroplasty. J Orthop Res 1992, 10:405-422.
20. Sumner D.R., Galante J.O. Determinants of stress shielding: design versus materials versus interface. Clin Orthop Relat Res 1992, 274:202-212.
21. Long M., Rack H.J. Titanium alloys in total joint replacement-a materials science perspective. Biomaterials 1998, 19:1621-1639.
22. Ho W.F., Pan C.H., Wu S.C., Hsu H.C. Mechanical properties and deformation behavior of Ti-5Cr-xFe alloys. J Alloys Compd 2009, 472:546-550.
23. Ho W.F., Wu S.C., Chang H.H., Hsu H.C. Structure and mechanical properties of Ti-5Cr based alloy with Mo addition. Mater Sci Eng C 2010, 30:904-909.
24. Cheng C.H., Hsu H.C., Wu S.C., Wang H.W., Ho W.F. Effects of chromium addition on structure and mechanical properties of Ti-10Zr alloy. J Alloy Compd 2009, 48:524-528.
25. Hsu H.C., Wu S.C., Hsu S.K., Li Y.C., Ho W.F. Effects of molybdenum content on the structure and mechanical properties of as-cast Ti-10Zr-based alloys for biomedical applications. Mater Sci Eng C 2012, 32:517-522.
26. Hsu H.C., Wu S.C., Hsu S.K., Tsai M.S., Chang T.Y., Ho W.F. Processing and mechanical properties of porous Ti-7.5Mo alloy. Mater Des 2013, 47:21-26.
27. Hsu H.C., Hsu S.K., Tsou H.K., Wu S.C., Lai T.H., Ho W.F. Fabrication and characterization of porous Ti-7.5Mo alloy scaffolds for biomedical applications. J Mater Sci Mater Med 2013, 24:645-657.
28. Niinomi M. Recent metallic materials for biomedical applications. Metall Mater Trans A 2002, 33:477-486.
29. Prendergast P., Taylor D. Stress analysis of the proximo-medial femur after total hip replacement. J Biomed Eng 1990, 12:379-382.
30. Wang X., Chen Y., Xu L., Liu Z., Woo K.D. Effects of Sn content on the microstructure, mechanical properties and biocompatibility of Ti-Nb-Sn/hydroxyapatite biocomposites synthesized by powder metallurgy. Mater Des 2013, 49:511-519.
31. Wei Q., Wang L., Fu Y., Qin J., Lu W., Zhang D. Influence of oxygen content on microstructure and mechanical properties of Ti-Nb-Ta-Zr alloy. Mater Des 2011, 32:2934-2939.
32. He G., Eckert J., Dai Q.L., Sui M.L., Löser W., Hagiwara M., et al. Nanostructured Ti-based multi-component alloys with potential for biomedical applications. Biomaterials 2003, 24:5115-5120.
33. Jung T.K., Matsumoto H., Abumiya T., Masahashi N., Kim M.S., Hanada S. Mechanical properties-graded Ti alloy implants for orthopedic applications. Mater Sci Forum 2010, 631-632:205-210.
34. Hsu H.C., Wu S.C., Hsu S.K., Syu J.Y., Ho W.F. The structure and mechanical properties of as-cast Ti-25Nb-xSn alloys for biomedical applications. Mater Sci Eng A 2013, 568:1-7.
35. Kikuchi M., Takahashi M., Okuno O. Mechanical properties and grindability of dental cast Ti-Nb alloys. Dent Mater J 2003, 22:328-342.
36. Xu L.J., Xiao S.L., Tian T., Chen Y.Y., Huang Y.D. Microstructure and dry wear properties of Ti-Nb alloys for dental prostheses. Trans Nonferrous Met Soc China 2009, 19:s639-s644.
37. Hsu H.C., Hsu S.K., Wu S.C., Lee C.J., Ho W.F. Structure and mechanical properties of as-cast Ti-5Nb-xFe alloys. Mater Character 2010, 61:851-858.
38. Donachie M.J. Titanium a Technical Guide 2000, ASM International, Metals Park, Ohio, vol. 126, p. 15. 2nd ed.
39. Ho W.F., Wu S.C., Hsu S.K., Fang L.S., Hsu H.C. Bond strength of Ti-5Cr based alloys to dental porcelain with Mo addition. Mater Des 2013, 43:233-236.
40. Craig RG. Restorative Dental Materials 1993, CV Mosby, St. Louis, p. 395, 426, 492. 9th ed.
41. Bagariatskii I.A., Nosova G.I., Tagunova T.V. Factors in the formation of metastable phases in titanium-base alloys. Sov Phys Dokl 1959, 3:1014-1018.
42. Zhao X., Niinomi M., Nakai M., Hieda J. Beta type Ti-Mo alloys with changeable Young's modulus for spinal fixation applications. Acta Biomater 2012, 8:1990-1997.
43. Wood R.M. Martensitic alpha and omega phases as deformation products in a titanium-15% molybdenum alloy. Acta Metall 1963, 11:907-914.
44. Lyasotskii IV., D'yakonova NB. Structure model for discussion of the peculiarities of the b.c.c.→ω transition in alloys of titanium and zirconium. Phys Met Metallogr 1980, 50:118-126.
45. Afonso C.R.M., Aleixo G.T., Ramirez A.J., Caram R. Influence of cooling rate on microstructure of Ti-Nb alloy for orthopedic implants. Mater Sci Eng C 2007, 27:908-913.
46. Ho W.F., Wu S.C., Wang H.W., Hsu H.C. Effects of Cr addition on grindability of cast Ti-10Zr based alloys. Mater Chem Phys 2010, 121:465-471.
47. Hsu H.C., Pan C.H., Wu S.C., Ho W.F. Structure and grindability of cast Ti-5Cr-xFe alloys. J Alloys Compd 2009, 474:578-583.
48. Graft W.H., Rostoker W. Symposium on Titanium: Second Pacific Area National Meeting 1957, ASTM, Philadelphia, p. 130-44.
49. Koike M., Itoh M., Okuno O., Kimura K., Takeda O., Okabe T.H., et al. Evaluation of Ti-Cr-Cu alloys for dental applications. J Mater Eng Perform 2005, 14:778-783.