Numerical study of turbulent heat transfer in separated flow: Review

International Review of Mechanical Engineering

Volumn 7, Issue 2, 2013, Pages 337-349

  Togun, Hussein ^a,b   Abdulrazzaq, Tuqa ^c   Kazi, S N ^a   Kadhum, Abdul Amir H ^d   Badarudin, Ahmed ^a   Ariffin, M K A ^c   Sadeghinezhad, Emad ^a  

^a UNIVERSITY OF MALAYA   (Malaysia)

^b UNIVERSITY OF THI QAR   (Iraq)

^c UNIVERSITY PUTRA MALAYSIA   (Malaysia)

^d UNIVERSITI KEBANGSAAN MALAYSIA   (Malaysia)

Author keywords

Facing step; Ribbedchannel; Separation flow; Sudden expansion; Swirl flow; Twist tape

Indexed keywords

EID: 84877695959     PISSN: 19708734     EISSN: 25325655     Source Type: Journal    
DOI: None     Document Type: Article

References (121)

1. R.P. Durrett, W.H. Stevenson, H.D. Thompson, Radial and axialturbulent flow measurements with an LDV in an axisymmetricsudden expansion air flow, Journal of Fluids Engineering, Vol.110, pp. 367-372, 1988.
2. Z. Mehrez, M. Bouterra, A. El Cafsi, A. Belghith and P. LeQuéré, Simulation of the Periodically Perturbed Separated andReattaching Flow over a Backward-Facing-step, Journal ofApplied Fluid Mechanics, Vol. 3, (2), 1-8, 2010.
3. R. Smyth, Turbulent flow over plane symmetric suddenexpansion, J. of heat transfer ASME Trans. Vol. 101, pp. 348 -353, 1979.
4. P.K. Chang, Separated of flow, Heading ton Hill Hall 1st. edition(1970)
5. E.J. Hall and R.H. Pletcher, Application of a viscous-InviscedInteraction procedure to predict separated flows with heattransfer, J. of Heat transfer, Vol. 107, pp. 557-563, 1985.)
6. J. Keith Moss, Heat and Mass transfer in Building servicesdesign, edition (1998)
7. H.A. Hbib and D.M. McEligon Turbulent heat transfer with swirlflow downstream of an abrupt pipe expansion, conference pp.159-164, (1982).
8. H.K. Moffatt,1964, Viscous and resistive eddies near a sharpcorner, J. Fluid Mech. Vol. 18, pp. 1-18, 1964.
9. T.D. Taylor and E. Ndefo, Computation of viscous flow in achannel by the method of splitting, Proc. of the Second Int. Conf.on Num. Methods in Fluid Dynamics, Lecture Notes in Physics,vol. 8, pp. 356-364, Springer Verlag, New York. (1971).
10. P.J. Roache, 1972, Computational Fluid Dynamics, Hermosa,New Mexico,pp. 139-173. (1972).
11. Y.S. Lee and L.C. Smith, Analysis of power-law viscousmaterials using complex stream, potential and stress functions,inEncyclopedia of Fluid Mechanics, vol. 1, Flow Phenomena andMeasurement, ed. N. P. Cheremisinoff, pp. 1105-1154, 1986.
12. F. Durst, and J.C.F. Peireira, Time-dependent laminarbackwardfacingstep flow in a two-dimensional duct, ASME J.Fluids Eng., Vol. 110, PP. 289, 1988.
13. CC Chieng and BE Launder, On the calculation of turbulent heattransport downstream from an abrupt pipe expansion. NumerHeat Transfer, Vol. 3, pp.189-207, 1980.
14. PP Zemanick, RS Dougall, Local heat transfer downstream ofabrupt circular channel expansion. J. Heat Transfer, Vol. 92, pp.53-60, 1970.
15. AM Gooray, CB Watkins, Aung, Turbulent heat transfercomputations for rearward-facing-steps and sudden pipeexpansions. J. Heat Transfer Vol. 107, pp.70-76, 1985.
16. W. Aung, R. J. Goldstein, Heat transfer in turbulent separatedflow downstream of a rearward-facing-step, Israel J. of Tech.Vol. 10, pp. 35-41, 1972.
17. E.M. Sparrow, O'Brein, Heat transfer coefficient on thedownstream face of an abrupt enlargement or inlet constriction ina pipe. ASME Journal of Heat Transfer Vol. 102, pp. 408-414,1985.
18. W.D. Moss, S. Baker, Re-Circulating flows associated with twodimensional steps. The Aeronautical Q. 31, pt. 3, 1980.
19. J.K. Eaton, J.P. Johnston, Turbulent flow reattachment: Anexperimental study of the flow and structure behind a backwardfacing-step. Report MD-39, department of mechanicalengineering Stanford University (1980).
20. M.A. Habib, A.M. Attya, D.M. McEligot, Calculation of turbulentflow and heat transfer in channels with streamwise periodic flow.ASME Winter Annual Meeting in Boston, and ASME J. ofTurbomachinery, Vol. 110, pp. 405-411, 1988.
21. M.A. Habib., F. Durst, D. M. McEligot, Streamwise-PeriodicFlow Around Baffles, Proc. 2nd Int. Conference onApplications of Laser Anemometry to Fluid Mechanics, Lisbon,Portugal, 1984.
22. C. Berner, F. Durst, D.M. McEligot, Flow around baffles. ASMEJournal of Heat Transfer, Vol. 106, pp. 743-749, 1984.
23. Kwang -Yong Kim, Ju-Lee, Prediction of turbulent heattransfer downstream of an abrupt pipe expansion, KSMEJournal, Vol. 8, pp. 248-254, 1994.
24. B.T.F. Chung, S. Jia, A turbulent near-wall model on convectiveheat transfer from an abrupt expansion tube, J. Heat MassTransfer, Vol. 31, pp. 33-40, 1995.
25. Hsieh, KC Chang, Calculation of wall heat transfer in pipeexpansion turbulent flows, Int. J Heat and Mass Transfer, Vol.39, pp. 3813-3822, 1996.
26. B.E. Launder, B. I. Sharma, Application of the energydissipationmodel of turbulence to the calculation of flow near aspinning disc. Lett. Heat Mass Transfer, Vol. 1, pp. 131-138,1974.
27. C.K.G. Lam, K.A. Bremhorst, Modified form of the k- modelfor predicting wall turbulence, ASME J. Fluids Engng., Vol. 103,pp. 456-460, 1981.
28. K.Y. Chien, Prediction of channel and boundary-layer flows witha low-Reynolds-number turbulence model. AIAA J., Vol. 20,pp. 33-38, 1982.
29. Y. Nagano, M. Hishida, Improved form of k-Ie{cyrillic, ukrainian} model for wallturbulent shear flows, ASME J. Fluids Engng., Vol. 109, pp. 156-160, 1987.
30. H. K. Myong, N. Kasagi, A new approach to improved of k- Ie{cyrillic, ukrainian} turbulence model for wall bounded shear flows, JSMEJ. Ser.Vol. H33, pp. 63-72, 1990.
31. Y. Nagano, M. Tagawa, An improved k- Ie{cyrillic, ukrainian} model for boundarylayer flows, ASME J. Fluids Engng., Vol. 112, pp. 33-39, 1990.
32. Z. Yang, H. T. Shih, New time scale based k- Ie{cyrillic, ukrainian} model for nearwallturbulence. AIAA J.,Vol. 31, pp. 1191-1198, 1993.
33. K. Abe, T. Kondoh, Y. Nagano, A new turbulence model forpredicting fluid flow and heat transfer in separating andreattaching flows--I. Flow field calculations. Int. J. Heat MassTransfer, Vol. 37, pp. 139-151, 1994.
34. KC Chang, WD Hsieh, CS Chen, A modified low-Reynoldsnumber turbulence model applicable to recirculating flow in pipeexpansion. J. Fluids Eng, Vol. 117, pp. 417-423, 1995.
35. JW Bauglm, MA Hoffman, BE Launder, D Lee, C Yap, Heattransfer, temperature, and velocity measurements downstream ofan abrupt expansion in a circular tube at a uniform walltemperature. J Heat Transfer, Vol. 111, pp. 870-876,1989.
36. Zeng- Yuau Guo, DE-Yu Li, Xin-Gang Liang, Thermal effect onthe recirculation zone in sudden expansion gas flows. Int. J. Heatand Mass Transfer, Vol. 39, pp. 2619-2624, 1996.
37. M. Prud'homme, S. Elghobashi, Turbulent heat transfer near thereattachment of flow downstream of a sudden pipe expansion. Numer. Heat Transfer, Vol. 10, pp. 349-368, 1968.
38. M.F. Moon, G. Rudinger, Velocity distribution in an abruptlyexpanding circular duct, J. Fluid Eng. Vol. 99 pp. 226-230,1977.
39. S.A.M. Said, M.A. Habib, M.O. Iqbal, Heat transfer to pulsatingturbulent flow in an abrupt pipe expansion, Int. J. Numer.Methods Heat Fluid Flow, Vol. 13, no. (2-3), pp. 286-308,2003.
40. A. Boughamoura, S.B. Nasrallah, Piston-driven turbulent flowand heat transfer in a pipe with a sudden expansion.International Journal of Heat and Technology, Vol. 22 no. (2), pp. 31-40, 2004.
41. K. Sugawara, H. Yoshikawa, T. Ota, LES of three-dimensionalseparated flow and heat transfer in a symmetric expansion planechannel. J. Nippon Dennetsu Shinpojiumu Koen Ronbunshu,Vol.1, pp. 103-104, 2004.
42. K. Sugawara, H. Yoshikawa, T. Ota, LES of turbulent separatedflow, heat transfer in a symmetric expansion plane channel. Journal of Fluids Engineering, Transactions of the ASME, Vol.127, no. (5), pp. 865-871, 2005.
43. Yoshikawa Hiroyuki, Yoshikawa Makoto, Ota Terukazu, Numerical Simulation of Heat Transfer in Unsteady Separatedand Reattached Flow Around a Symmetric Sudden ExpansionChannel. J. Nippon Dennetsu Shinpojiumu Koen RonbunshuVol. 39, pp. 15-16, 2002.
44. Yoshikawa Hiroyuki, Ishikawa Kimitake, Ota Terukazu, Numerical Simulation of Three-Dimensional Separated Flow andHeat Transfer in an Enlarged Rectangular Channel. J. NipponDennetsu Shinpojiumu Koen Ronbunshu, Vol. 41,pp.221-222,2004.
45. Ota Terukazu, Yanaoka Hideki, Shibuya Kazuki, Nakajima Madoka, Yoshikawa Hiroyuki, Numerical Analysis of SeparatedFlow and Heat Transfer in an Enlarged Channel. Transactions ofthe Japan Society of Mechanical Engineers, Vol. B 66, pp.2109-2116, 2002.
46. V.I. Terekhov, T.V. Bogatko, Effect of boundary layer thicknessbefore the flow separation on aerodynamic characteristic andheat transfer behind an abrupt expansion in a round tube. J.thermophysics and Aeromechanics, Vol. 15, pp. 91-97, 2008.
47. V.I. Terekhov, M.A. Pakhomov, Predictions of turbulent flowand heat transfer in gas droplets flow downstream of a suddenpipe expansion, Int. J. heat and mass transfer, Vol. 52, pp.4711-4721, 2009.
48. EV Shishov, PS Roganov, SI Grabamik, VP Zabolotsky, Heattransfer in the recirculating region formed by a backward-facingstep.Int. J. Heat Mass Transferal, Vol. 31, no. (8), pp. 1557-1562, 1988.
49. D. Eitheridge and P. Kemp, Measurement of turbulent flowdownstream of a rearward-facing-step. J. FIuid Mech., Vol. 86,no. (3), pp. 545-566, 1978.
50. W. Moss, D. Baker and L. Bradbury, Measurements of meanvelocity and Reynolds stresses in region of recirculating flow, Symposium on Turbulent Shear Flows, Pennsylvania StateUniversity (1977).
51. J. Kim, S. Kline and J. Johnston, Investigation of a reattachingturbulent shear flow over a backward facing-step. Trans. ASME,Vol. 102, no. (3), pp. 302-308, 1980.
52. D.E. Abbott and S.J. Kline, Experimental investigation ofsubsonic turbulent flow over single and double backwardfacing-steps, Trans. ASME, Vol. 84, pp. 317-325, 1962.
53. I. Thani, M. Inchi and H. Komoda, Experimental investigation offlow separation associated with a step or groove, Aero. Res. Inst.Tokyo Univ., Report No. 364, pp. 119-137 (1967).
54. J. Eaton and J. Johnston, A review of research on subsonicturbulent flow reattachment, AJAA Paper No. 80- 1438 (1980).
55. R. Smith, Turbulent flow over a plane symmetric suddenexpansion, Trans. ASME Vol. 101, no. (3), pp. 348-353, 1979.
56. R. A. Seban, Heat transfer to the turbulent separated flow of airdownstream of a step in the surface of a plate, ASME J. HeatTransfer, Vol. 86, pp. 259-269, 1964.
57. E.G. Filetti, W.M. Kays, Heat transfer in separated, reattachedand redeveloped regions behind a double step at entrance to flatduct, Journal of Heat transfer, Vol. 89, pp. 163-168, 1967.
58. K. Abe, T. Kondoh, Y. Nagano, A new turbulence model forpredicting fluid flow and heat transfer in separating andreattaching flows-II. Thermal field calculations. Int. J. Heatand Mass Transfer, Vol. 38, no. (8), pp. 1467-1481, 1995.
59. Nagano, tagawa and tsuji(proc.asme/jsme thermal eng. jointconf. 3(1991).233
60. K. Heyerichs, A. Pollard, Heat transfer in separated andimpinging turbulent flows. Int. J. Heat and Mass Transfer, Vol.39, pp. 2385-2400, 1996.
61. B.A. Kader, Temperature and concentration profiles in fullyturbulent boundary layers. Int. J. Heat and Mass Transfer, Vol.24, no. (9), pp. 1541-1544, 1981.
62. C.L. Jayatilleke, The influence of prandtl number and surfaceroughness on the resistances of the laminar sub-layer tomomentum and heat transfer. Prog. Heat Mass Transfer, Vol. 1,pp. 193-329, 1969.
63. M. Wolfshtein, The velocity and temperature distribution in onedimensionalflow with turbulence augmentation and pressuregradient. Int. J. Heat and Mass Transfer, Vol. 12, pp. 301-318,1969.
64. [64] Zigh Abdeleghani, Computational study of simultaneous heatand mass transfer in turbulent separated flow, PhD Engineeringthesis Stevens Institute of Technology, USA1993.
65. Y Yin, Y Nagano, M Tagawa, Numerical prediction of turbulentheat transfer in high-Prandtl-number fluids. Trans JSME, Vol.B58, pp. 2254-2260, 1992.
66. Nagano, Y., Kim, C., A two-equation model for heat transport inwall turbulent shear flows. J. Heat Transfer, TransactionsASME, Vol. 110, pp. 583-589, 1988.
67. S Dutta, S Acharya, Heat transfer and flow past a backstep withthe nonlinear k-Ie{cyrillic, ukrainian} turbulence model and the modified k-eturbulence model. Numer Heat Transfer, Vol. A23, pp. 281-301,1993.
68. G.H. Rhee, H.J. Sung, A nonlinear low-Reynolds-number k-model for turbulent separated and reattaching flows-II. Thermalfield computations, Int. J. Heat Mass Transfers, Vol. 39, no.(16), pp. 3465-3474, 1996.
69. T.S. Park, H.J. Sung, A nonlinear low-Reynolds number k-εmodel for turbulent separated and reattaching flows--I. Flowfield computations, Int. J. Heat Mass Transfer, Vol. 38, pp.2657-2666, 1995.
70. O. Labbe, P. Sagaut, E. Montreuil, Large-eddy simulation of heattransfer over a backward-facing-step. Numer. Heat Transfer Pt.A-Appl., Vol. 42,no. (1-2), pp.73-90, 2002.
71. R.V.R. Avancha, R.H. Pletcher, Large eddy simulation of theturbulent flow past a backward-facing-step with heat transfer andproperty variations. Int. J. Heat Fluid Flow, Vol. 23, no. (5), pp.601-614, 2002.
72. Zouhaier Mehrez, Mourad Bouterra, Afif El Cafsi, Ali Belghith, Patrick LE Quere, The influence of the periodic disturbance onthe local heat transfer in separated and reattached flow. JournalHeat Mass Transfer, Vol. 46, pp. 107-112, 2009.
73. Zouhaier Mehrez, Mourad Bouterra, Afif El Cafsi, Ali Belghith, Patrick LE Quere, Heat transfer control of separated andreattaching flow by local forcing-effect of Richardson number. Journal of applied science in the thermodynamics and fluidmechanics, Vol. 4, pp. 1802-9388, 2010.
74. V Scherer, S Wittig, The influence of the recirculation region: acomparison of the convective heat transfer downstream of abackward facing-step and behind a jet in a cross flow. J. Eng GasTurbines and Power, Vol. 113, pp. 126-134, 1991.
75. Y-T Yang, M.L. Huang, Numerical studies of heat transfercharacteristics by using jet discharge at downstream of abackward-facing-step. J. Acta Mechanica, Vol. 128, pp. 29-37,1998.
76. Y.L. Tsay, T.S. Chang, J.C. Cheng, Heat transfer enhancementof backward facing-step flow in a channel by using baffleinstallation on the channel wall, Acta Mechanica, Vol. 174, no.c(1-2), pp. 63-76, 2005.
77. J.H. Nie, B.F. Armaly, Three-dimensional convective flowadjacent to backward-facing-step-effects of step height. Int. J.Heat Mass Transfer, Vol. 45, no. (12), pp. 2431-2438, 2002.
78. D.B. Carrington, D.W. Pepper, Convective heat transferdownstream of a 3-D backward-facing-step. Numer. HeatTransfer Pt. A-Appl., Vol. 41, no. (6-7), pp. 555-578, 2002.
79. J.G. Barbosa Saldana, N.K. Anand, V. Sarin, Numericalsimulation of mixed convective flow over a three-dimensionalhorizontal backward facing-step. Journal of Heat Transfer Vol.127, no. (9), pp. 1027-1036, 2005.
80. K. Sakuraba, K. Fukazawa, M. Sano, Control of turbulentchannel flow over a backward-facing-step by suction orinjection. Heat Transfer-Asian Research, Vol. 33, no. (8), pp.490-504, 2004.
81. Aya Kitoh, Kazuaki Sugawara, Hiroyuki Yoshikawa, Expansionratio effects on three-dimensional separated flow and heattransfer around backward-facing-steps. J. Heat Transfer, Vol.129, no. (9), pp. 1141-1156, 2007.
82. V Uruba, P Jonas, O Mazur, Control of a channel-flow behind abackward-facing-step by suction/blowing. International Journalof Heat and Fluid Flow, Vol. 28, pp. 665-672, 2007.
83. Y.T. Chen, J.H. Nie, B.F. Armaly, H.T. Hsieh, Turbulentseparated convection flow adjacent to backward facing-stepeffects of step height. Int. J. Heat and Mass Transfer, Vol. 49,pp. 3670-3680, 2006.
84. MC Thompson, K Hourigan, MC Welsh, Numerical simulationof heat transfer in the separated and reattached flow on a bluntflat plate. Int. Comm. Heat Mass Transfer, Vol. 13, pp. 665-674,1986.
85. N Djilali, I Gartshore, M Salcudean, Calculation of convectiveheat transfer in recirculating turbulent flow using various nearwallturbulence models. Numer Heat Transfer, Vol. 16A, pp.189-212, 1989.
86. T Ota, H Yanaoka, Numerical analysis of a separated andreattached flow over a blunt flat plate, Proc 5th Int Symp onCompt Fluid Dynamics, Vol. 3, pp. 423-428, 1993.
87. R Okamoto, T Ota, Large eddy simulation of a separated andreattached flow and heat transfer over a blunt flat plate. Proc 3rdKSME-JSME Thermal Eng Conf Vol. 1, pp. 20-23, 1996.
88. R Okamoto, T Ota, Large eddy simulation of turbulent separatedand reattached flow over a blunt flat plate. Trans JSME, Vol.B63, pp. 175-181, 1997a
89. R Okamoto, T Ota, Large eddy simulation of turbulent heattransfer over a blunt flat plate. Trans JSME, Vol. B163, pp.1344-1350, 1997b.
90. Z.F. Sun, Numerical simulation of flow in an array of in-lineblunt boards: mass transfer and flow patterns. J. ChemicalEngineering Science, Vol. 56, no. (5), pp. 1883-1896, 2001.
91. H Yanaoka, T Ota, Three-dimensional numerical simulation ofseparated and reattached flow and heat transfer over blunt flatplate, Trans JSME, Vol. B62, pp. 1111-1117, 1996a.
92. H Yanaoka, T Ota, Three-dimensional numerical simulation ofseparated and reattached flow and heat transfer over blunt flatplate at high Reynolds number. Trans JSME, Vol. B62, pp.3439-3445, 1996d.
93. H Yanaoka, T Ota, Three-dimensional numerical simulation ofunsteady flow and heat transfer over blunt flat plate in a channel. Trans. JSME, Vol. B62, pp. 2745-2750, 1996c.
94. Hideki Yanaoka, Hiroyuki Yoshikawa, Terukazu Ota, Directnumerical simulation of turbulent separated flow and heattransfer over a blunt flat plate. J. Heat Transfer, Vol. 125, pp.779-788, 2003.
95. E. Velayati, M. Yaghoubi, Numerical study of convective heattransfer from an array of parallel bluff plates. Int. J. Heat andFluid Flow, Vol. 26, pp. 80-91, 2005.
96. E.M. Sparrow, J.E. Niethammer, A. Chaboki, Heat transfer andpressure drop characteristics of arrays of rectangular modulesencountered in electronic equipment. Int. J. Heat and MassTransfer, Vol. 25, no. (7), pp. 961-973, 1982.
97. F.P. Incropera, D.P. DeWitt, Fundamentals of heat and masstransfer. Fourth ed. John Wiley& Sons, Inc., New York 1996
98. Chr. Lamnatou, E. Papanicolaou, V. Belessiotis, N. Kyriakis, Numerical study of the interaction among a pair of blunt platessubject to convective drying-A conjugate approach. InternationalJournal of Thermal Sciences, Vol. 49, pp. 2467-2482, 2010.
99. R.L. Webb, E.R.G. Eckert, R.J. Goldstein, Heat transfer andfriction in tubes with repeated rib-roughness, Int. J. HeatTransfer, Vol. 14, pp. 601-617, 1971.
100. J. X. Zhu, M. Fiebig, N. K. Mitra, Numerical investigation ofturbulent flows and heat transfer in a rib-roughened channel withlongitudinal vortex generators. International Journal of Heat andMass Transfer, Vol. 38, no. (3), pp.495-501, 1995.
101. Tong-Miin Liou, Shih-Hui Chen, Kuan-Chen Shih, Numericalsimulation of turbulent flow field and heat transfer in a twodimensionalchannel with periodic slit ribs. International Journalof Heat and Mass Transfer, Vol. 45, no. (22), pp. 4493-4505,2002.
102. Hideki Yanaoka, Takao Inamura, Reiri Kobayashi, Numericalsimulation of separated flow transition and heat transfer around atwo-dimensional rib. J. Heat Transfer Asian research, Vol. 36,no, (8), pp. 513-528, 2007.
103. [103] Liu Pingan, Gao Ye, Mi Hairong, Han Liu, Numerical simulationof heat transfer and resistance pattern in channels with differentribs. Computer Design and Applications (ICCDA), 2010International Conference on V3-507-V3-511.
104. E. Esmaeilzadeh, A. Alamgholilou and H. Mirzaie, NumericalInvestigation on Heat Transfer Enhancement of Traverse Ribs in3D Turbulent Duct Flow. Asian J. Applied Sci., Vol. 1, pp. 286-303, 2008.
105. Oronzio Manca, Sergio Nardini and Daniele Ricci, Numericalinvestigation of air forced convection inchannels with differentlyshaped transverse ribs, International Journal of NumericalMethods for Heat & Fluid Flow Vol. 21, No. 5, pp. 618-639,2011.
106. Joon. Ahn, H. Choi, J.S. Lee, Large eddy simulation of flow andheat transfer in a channel roughened by square or semicircle ribs. ASME J. Turbomach., Vol. 127, pp. 263-269, 2007.
107. K. Watanabe, T. Takahashi, LES and measurement of heattransfer and flow in rectangular channels with crossed angledribs, Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of theJapan Society of Mechanical Engineers, Part B 71 (705) pp.1459-1464, 2005.
108. R. Kamalia, A.R. Bineshb, The importance of rib shape effectson the local heat transfer and flow friction characteristics ofsquare ducts with ribbed internal surfaces, InternationalCommunications in Heat and Mass Transfer, Vol. 35, no.(8),pp.1032-1040, 2008.
109. Joon Ahn, Joon Sik Lee, Large eddy simulation of flow and heattransfer in a channel with a detached rib array. InternationalJournal of Heat and Mass Transfer, Vol. 53, pp. 445-452, 2010.
110. D.N. Ryu, D.H. Choi, V.C. Patel, Analysis of turbulent flow inchannels roughened by two-dimensional ribs and threedimensionalblocks. Part II: Heat transfer, International Journalof Heat And Fluid Flow, Vol. 28, 1112-1124,2007.
111. Huichun Liu, Jianhua Wang, Numerical investigation onsynthetical performances of fluid flow and heat transfer ofsemiattached rib-channels. Int. Journal of Heat and MassTransfer, Vol. 54, pp. 575-583, 2011.
112. S.L. Milora, S.K. Combs and C.A. Foster, A numerical model forswirl flow cooling in high-heat-flux particle beam targets and thedesign of a swirl-flow-based plasma limiter. Nuclear Engineeringand Design. Fusion, Vol. 3, pp. 301-308, 1986.
113. Stephen Conway, Doru Caraeni, Laszlo Fuchs, Large eddysimulation of the flow through the blades of a swirl generator, International Journal of Heat and Fluid Flow Vol. 21, pp. 664-673, 2000.
114. Kwang-Yong Kim and Yoon-Seok Chang, Prediction ofturbulent heat transfer in swirling flow downstream of an abruptpipe expansion. Journal of Mechanical Science and Technology,Vol. 11, no. (5), pp.565-573, 1997.
115. B Guo, T.A.G Langrish, D.F Fletcher, Simulation of turbulentswirling flow in an axisymmetric sudden expansion. AIAA J.,Vol. 39, no. (1), pp. 96-102, 2001.
116. A. Nakayama, F. Kuwahara, N. Kokubo, T. Ishida, M. Ohara, Anumerical model for thermal systems with helically-coiled tubesand its experimental verification. Heat Mass Transfer, Vol. 38,no. (4-5), pp.389-398, 2002.
117. Mao-Yu Wen, Flow structures and heat transfer of swirling jetimpinging on a flat surface with micro-vibrations. Int. J. Heatand Mass Transfer, Vol. 48, pp. 545-560, 2005.
118. S. Eiamsa-ard, K. Wongcharee, S. Sripattanapipat, 3-DNumerical simulation of swirling flow and convective heattransfer in a circular tube induced by means of loose-fit twistedtapes. International Communications Int. J. Heat and MassTransfer, Vol. 36, pp. 947-955, 2009.
119. R.M. Manglik, A.E. Bergles, Heat transfer and pressure dropcorrelations for twisted-tape inserts in isothermal tubes, part II:Transition and turbulent flows. Transaction ASME, Journal ofHeat Transfer, Vol. 11, pp. 890-896, 1993.
120. Cui Yong-Zhang, Tian Mao-Cheng, Three-dimensionalnumerical simulation of thermal-hydraulic performance of acircular tube with edgefold-twisted-tape inserts. J.Hydrodynamics, Vol. 22, no. (5), pp.662-670, 2010.
121. [121] R. J. Yadav, A. S. Padalkar, CFD Analysis for Heat TransferEnhancement inside a CircularTube with Half-Length Upstreamand Half-Length Downstream Twisted Tape, Hindawi PublishingCorporation Journal of Thermodynamics Volume 2012, ArticleID 580593.