Morphology and property changes of immiscible polycarbonate/poly(L-lactide) blends induced by carbon nanotubes

Polymer International

Volumn 62, Issue 6, 2013, Pages 957-965

  Wang, Yong hong ^a   Shi, Yun yun ^a   Dai, Jian ^a   Yang, Jing hui ^a   Huang, Ting ^a   Zhang, Nan ^a   Peng, Ya ^b   Wang, Yong ^a  

^a SOUTHWEST JIAOTONG UNIVERSITY   (China)

^b XIHUA UNIVERSITY   (China)

Author keywords

Carbon nanotubes; Morphology; PC PLLA; Properties

Indexed keywords

CO-CONTINUOUS MORPHOLOGY; ELECTRICAL RESISTIVITY; FUNCTIONALIZED MULTI-WALLED CARBON NANOTUBES; HYDROLYTIC DEGRADATION; NETWORK STRUCTURES; PROPERTIES; RHEOLOGICAL MEASUREMENTS; SCANNING ELECTRONS;

CARBON NANOTUBES; CONSUMER ELECTRONICS; DIFFERENTIAL SCANNING CALORIMETRY; ELECTRIC CONDUCTIVITY; MECHANICAL PROPERTIES; MULTIWALLED CARBON NANOTUBES (MWCN); NANOCOMPOSITES; PACKAGING MATERIALS; SCANNING ELECTRON MICROSCOPY; TRANSMISSION ELECTRON MICROSCOPY;

MORPHOLOGY;

EID: 84877620151     PISSN: 09598103     EISSN: 10970126     Source Type: Journal    
DOI: 10.1002/pi.4383     Document Type: Article

References (32)

1. Pötschke P, Bhattacharyya AR and Janke A, Polymer 44:8061-8069 (2003).
2. Meincke O, Kaempfer D, Weickmann H, Friedrich C, Vathauer M and Warth H, Polymer 45:739-748 (2004).
3. Li Y and Shimizu H, Macromolecules 41:5339-5344 (2008).
4. Göldel A, Kasaliwal G and Pötschke P, Macromol Rapid Commun 30:423-429 (2009).
5. Zhang L, Wan C and Zhang Y, Compos Sci Technol 69:2212-2217 (2009).
6. Panda B, Bhattacharyya AR and Kulkarni AR, Polym Eng Sci 51:1550-1563 (2011).
7. Bose S, Bhattacharyya AR, Khare RA, Kamath SS and Kulkarni AR, Polym Eng Sci 51:1987-2000 (2011).
8. Gültner M, Göldel A and Pötschke P, Compos Sci Technol 72:41-48 (2011).
9. Sumita M, Sakata K, Asai S, Miyasaka K and Nakagawa H, Polym Bull 25:265-271 (1991).
10. Zhang L, Wan C and Zhang Y, Polym Eng Sci 49:1909-1917 (2009).
11. Wu M and Shaw LL, J Power Sources 136:37-44 (2004).
12. Wu D, Zhang Y, Zhang M and Yu W, Biomacromolecules 10:417-424 (2009).
13. Liu L, Wang Y, Li Y, Wu J, Zhou Z and Jiang C, Polymer 50:3072-3078 (2009).
14. Xiang F, Wu J, Liu L, Huang T, Wang Y, Chen C, et al, Polym Adv Technol 22:2533-2542 (2011).
15. Shi Y, Li Y, Xiang F, Huang T, Chen C, Peng Y, et al, Polym Adv Technol 23:183-190 (2012).
16. Zhao Y, Qiu Z and Yang W, Compos Sci Technol 69:627-632 (2009).
17. Zhou Q and Marino X, Polym Eng Sci 50:320-330 (2010).
18. Paul MA, Delcourt C, Alexandre M, Degée Ph, Monteverde F and Dubois Ph, Polym Degrad Stab 87:535-542 (2005).
19. Lee JB, Lee YK, Choi GD, Na SW, Park TS and Kim WN, Polym Degrad Stab 96:553-560 (2011).
20. Kanzawa T and Tokumitsu K, J Appl Polym Sci 121:2908-2918 (2011).
21. He Y, Fan Z, Wei J and Li S, Polym Eng Sci 46:1583-1589 (2006).
22. Li Y, Wang Y, Liu L, Han L, Xiang F and Zhou Z, J Polym Sci B: Polym Phys 47:326-339 (2009).
23. Sandler JKW, Kirk JE, Kinloch IA, Shaffer MSP, Windle AH, Polymer 44:5893-5899 (2003).
24. Zou H, Wang K, Zhang Q and Fu Q, Polymer 47:7821-7826 (2006).
25. Xiang F, Shi Y, Li X, Huang T, Chen C, Peng Y, et al, Eur Polym J 48:350-361 (2012).
26. Khare RA, Bhattacharyya AR, Kulkarni AR, Saroop M and Biswas A, J Polym Sci B: Polym Phys 46:2286-2295 (2008).
27. Durmus A, Kasgoz A and Macosko CW, Polymer 48:4492-4502 (2007).
28. Hu G, Zhao C, Zhang S, Yang M and Wang Z, Polymer 47:480-488 (2006).
29. Xu ZH, Niu YH, Yang L, Xie WY, Li H, Gan ZH, et al, Polymer 51:730-737 (2010).
30. Tanrattanakul V, Baer E, Hiltner A, Hu R, Dimonie VL, El-Aasser MS, Sperling LH, Mylonakis SG, J Appl Polym Sci 62:2005-2013 (1996).
31. Park SD, Todo M, Arakawa K and Koganemaru M, Polymer 47:1357-1363 (2006).
32. Zhao Y, Qiu Z and Yang W, J Phys Chem B 112:16461-16468 (2008).