Mechanical properties of adhesives for bonding wood-A review

International Journal of Adhesion and Adhesives

Volumn 45, Issue , 2013, Pages 32-41

  Stoeckel, Frank ^a,c   Konnerth, Johannes ^b   Gindl Altmutter, Wolfgang ^a,b  

^a KOMPETENZZENTRUM HOLZ GMBH   (Austria)

^b UNIVERSITY OF NATURAL RESOURCES AND LIFE SCIENCES   (Austria)

^c TECHNICAL UNIVERSITY OF BRAUNSCHWEIG   (Germany)

Author keywords

Mechanical properties; Moisture; Nanoindentation; Temperature; Wood adhesives

Indexed keywords

BENDING TESTS; MECHANICAL PROPERTIES; MOISTURE; NANOINDENTATION; TEMPERATURE; WOOD;

ADHESIVE PERFORMANCE; ADHESIVE PROPERTIES; MECHANICAL CHARACTERISATION; MECHANICAL PROPERTIES OF ADHESIVES; SOLID WOOD PRODUCTS; STATE OF THE ART; WOOD ADHESIVES; WOOD-BASED COMPOSITES;

ADHESIVES;

ADHESIVES; MECHANICAL PROPERTIES; MOISTURE; TEMPERATURE; WOOD;

EID: 84877341958     PISSN: 01437496     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijadhadh.2013.03.013     Document Type: Article

References (100)

1. M Dunky, and P. Niemz Holzwerkstoffe und Leime. Technologie und Einflussfaktoren 2002 Springer-Verlag Berlin-Heidelberg New York
2. EN 302 1-4, Adhesives for load-bearing timber structures - test methods; 2004.
3. J Konnerth, W Gindl, M Harm, and U. Muller Comparing dry bond strength of spruce and beech wood glued with different adhesives by means of scarf- and lap joint testing method Holz Roh Werkstoff 64 2006 269 271 (Pubitemid 44139385)
4. B Gineste, JY Cognard, and A. Pizzi Analysis of the mechanical behavior of wood and welded wood under tensile-shear loads using a modified Arcan device J Adhes Sci Technol 26 2012 1717 1731
5. B Hahn, T Vallee, B Stamm, and Y. Weinand Experimental investigations and probabilistic strength prediction of linear welded double lap joints composed of timber Int J Adhes Adhes 39 2012 42 48
6. EN 319, particleboards and fibreboards - determination of tensile strength perpendicular to the plane of the board; 1993.
7. SA Grundberg, and POG. Hagman Measuring active wood fracture surfaces - an indirect method for evaluating gluing techniques in particle board Holz Roh Werkstoff 51 1993 49 54
8. S Veigel, J Follrich, W Gindl-Altmutter, and U. Muller Comparison of fracture energy testing by means of double cantilever beam-(DCB)-specimens and lap joint testing method for the characterization of adhesively bonded wood Eur J Wood Wood Prod 70 2012 3 10
9. AA. Marra Technology of wood bonding, principles in practice 1992 Van Nostrand Reinhold New York
10. P Fratzl, and R. Weinkamer Nature's hierarchical materials Prog Mater Sci 52 2007 1263 1334 (Pubitemid 47374755)
11. FA Kamke, and JN. Lee Adhesive penetration in wood-a review Wood Fiber Sci 39 2007 205 220
12. W Gindl, and HS. Gupta Cell-wall hardness and Young's modulus of melamine-modified spruce wood by nano-indentation Composites Part A 33 2002 1141 1145 (Pubitemid 34992099)
13. W Gindl, A Sretenovic, A Vincenti, and U. Muller Direct measurement of strain distribution along a wood bond line. Part 2: Effects of adhesive penetration on strain distribution Holzforschung 59 2005 307 310 (Pubitemid 40958804)
14. J Konnerth, and W Gindl Mechanical characterisation of wood-adhesive interphase cell walls by nanoindentation Holzforschung 60 2006 429 433 (Pubitemid 44139351)
15. JJ Marcinko, S Devathala, PL Rinaldi, and SC. Bao Investigating the molecular and bulk dynamics of PMDI/wood and UF/wood composites Forest Prod J 48 1998 81 84 (Pubitemid 128615803)
16. JJ Marcinko, PL Rinaldi, and SC. Bao Exploring the physicochemical nature of PMDI wood structural composite adhesion Forest Prod J 49 1999 75 78
17. O. Volkersen Die Nietkraftverteilung in zugbeanspruchten Nietverbindungen mit konstanten Laschenquerschnitten Luftfahrtforschung 15 1938 41 47
18. LFM da Silva, PC das Neves, RD Adams, A Wang, and JK. Spelt Analytical models of adhesively bonded joints - Part II: Comparative study Int J Adhes Adhes 29 2009 331 341
19. LFM da Silva, PJC das Neves, RD Adams, and JK. Spelt Analytical models of adhesively bonded joints - Part I: Literature survey Int J Adhes Adhes 29 2009 319 330
20. JY Cognard, M Bourgeois, R Creac'hcadec, and L. Sohier Comparative study of the results of various experimental tests used for the analysis of the mechanical behaviour of an adhesive in a bonded joint J Adhes Sci Technol 25 2011 2857 2879
21. AD Crocombe, and IA. Ashcroft Single lap joint geometry LFM Da Silva, A. Öchsner, Modeling of adhesively bonded joints 2008 Springer Berlin Heidelberg
22. JM Dinwoodie Causes of deterioration of UF chipboard under cyclic humidity conditions. 1 Performance of UF adhesive films Holzforschung 31 1977 50 55
23. AJ Bolton, and MA. Irle Physical aspects of wood adhesive bond formation with formaldehyde based adhesives. 1 The effect of curing conditions on the physical-properties of urea formaldehyde films Holzforschung 41 1987 155 158
24. MA Irle, and AJ. Bolton Physical aspects of wood adhesive bond formation with formaldehyde based adhesives. 2 Binder physical-properties and particleboard durability Holzforschung 42 1988 53 58
25. MA Irle, and AJ. Bolton Physical aspects of wood adhesive bond formation with formaldehyde based adhesives. 3. The creep-behavior of formaldehyde based resins at different relative humidities Holzforschung 45 1991 69 73
26. S Lučić, V Kovačević, and D. Hace Mechanical properties of adhesive thin films Int J Adhes Adhes 18 1998 115 123 (Pubitemid 128401791)
27. LFM Da Silva, and RD. Adams Measurement of the mechanical properties of structural adhesives in tension and shear over a wide range of temperatures J Adhes Sci Technol 19 2005 109 141 (Pubitemid 40352011)
28. U Müller, A Sretenovic, A Vincenti, and W. Gindl Direct measurement of strain distribution along a wood bond line. Part 1: Shear strain concentration in a lap joint specimen by means of electronic speckle pattern interferometry Holzforschung 59 2005 300 306 (Pubitemid 40958803)
29. J Konnerth, W Gindl, and U. Mueller Elastic properties of adhesive polymers. Part I: Polymer films by means of electronic speckle pattern interferometry J Appl Polym Sci 103 2007 3936 3939 (Pubitemid 46347232)
30. AS Singha, and VK. Thakur Study of mechanical properties of urea-formaldehyde thermosets reinforced by pine needle powder BioResources 4 2009 292 308
31. K Umemura, A Takahashi, and S. Kawai Durability of isocyanate resin adhesives for wood I: Thermal properties of isocyanate resin cured with water J Wood Sci 44 1998 204 210 (Pubitemid 128696571)
32. Stoeckel F. Characterization of elasto-mechanical properties of wood adhesives, TU Dresden, Dresden; 2007.
33. F Stoeckel, J Konnerth, W Kantner, J Moser, and W. Gindl Mechanical characterisation of adhesives in particle boards by means of nanoindentation Eur J Wood Wood Prod 68 2010 421 426
34. RG Schmidt, and CE. Frazier C-13 CP/MAS NMR as a direct probe of the wood-phenol formaldehyde adhesive bondline Wood Fiber Sci 30 1998 250 258 (Pubitemid 128496964)
35. RG Schmidt, and CE. Frazier Network characterization of phenol-formaldehyde thermosetting wood adhesive Int J Adhes Adhes 18 1998 139 146 (Pubitemid 128401794)
36. DK Ren, and CE. Frazier Wood/adhesive interactions and the phase morphology of moisture-cure polyurethane wood adhesives Int J Adhes Adhes 34 2012 55 61
37. S Clauss, DJ Dijkstra, J Gabriel, O Kläusler, M Matner, and W Meckel Influence of the chemical structure of PUR prepolymers on thermal stability Int J Adhes Adhes 31 2011 513 523
38. F López-Suevos, C Eyholzer, N Bordeanu, and K. Richter DMA analysis and wood bonding of PVAc latex reinforced with cellulose nanofibrils Cellulose 17 2010 387 398
39. Richter K, Lopez-Suevos F. Thermal behavior of polyurethane adhesives bonded to wood: Identification of components to improve thermal stability by dynamic mechanical analysis. In: International conference on wood adhesives, Lake Tahoe, Nevada; 2009.
40. H Kishi, A Fujita, J Miyazaki, S Matsuda, and A. Murakami Synthesis of wood-based epoxy resins and their mechanical and adhesive properties J Appl Polym Sci 102 2006 2285 2292 (Pubitemid 44619603)
41. Y Peng, SQ Shi, and MG. Kim Effect of temperature on the dynamic mechanical properties of resin film and wood Forest Prod J 58 2008 68 74
42. J Konnerth, A Jaeger, J Eberhardsteiner, U Mueller, and W. Gindl Elastic properties of adhesive polymers. Part II: Polymer films and bond lines by means of nanoindentation J Appl Polym Sci 102 2006 1234 1239 (Pubitemid 44518288)
43. R Wimmer, BN Lucas, TY Tsui, and WC. Oliver Longitudinal hardness and Young's modulus of spruce tracheid secondary walls using nanoindentation technique Wood Sci Technol 31 1997 131 141 (Pubitemid 127550749)
44. MR VanLandingham, JS Villarrubia, WF Guthrie, and GF. Meyers Nanoindentation of polymers: an overview Macromol Symposia 167 2001 15 43
45. WC Oliver, and GM. Pharr An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments J Mat Res 7 1992 1564 1583
46. AE Giannakopoulos, and S. Suresh Determination of elastoplastic properties by instrumented sharp indentation Scr Mater 40 1999 1191 1198
47. A Jäger, K Hofstetter, C Buksnowitz, W Gindl-Altmutter, and J. Konnerth Identification of stiffness tensor components of wood cell walls by means of nanoindentation Composites Part A 42 2011 2101 2109
48. M Obersriebnig, S Veigel, W Gindl-Altmutter, and J. Konnerth Determination of adhesive energy at the wood cell-wall/UF interface by nanoindentation (NI) Holzforschung 66 2012 781 787
49. Eckmann R. Charakterisierung der adhäsiven, kohäsiven und mechanischen Eigenschaften der Klebfuge in einer Holzverklebung Department of material sciences and process engineering, institute of wood science and technology, university of natural resources and applied life sciences. Vienna 2007.
50. J Konnerth, F Stoeckel, U Muller, and W. Gindl Elastic properties of adhesive polymers. III. Adhesive polymer films under dry and wet conditions characterized by means of nanoindentation J Appl Polym Sci 118 2010 1331 1334
51. S Clauss, J Gabriel, A Karbach, M Matner, and P. Niemz Influence of the adhesive formulation on the mechanical properties and bonding performance of polyurethane prepolymers Holzforschung 65 2011 835 844
52. J Follrich, F Stoeckel, and J. Konnerth Macro- and micromechanical characterization of wood-adhesive bonds exposed to alternating climate conditions Holzforschung 64 2010 705 711
53. W Gindl, T Schoberl, and G. Jeronimidis The interphase in phenol-formaldehyde and polymeric methylene diphenyl-di-isocyanate glue lines in wood Int J Adhes Adhes 24 2004 279 286
54. J Konnerth, and W. Gindl Observation of the influence of temperature on the mechanical properties of wood adhesives by nanoindentation Holzforschung 62 2008 714 717
55. J Konnerth, A Valla, and W. Gindl Nanoindentation-mapping of a wood-adhesive bond Appl Phys A - Mater Sci Process 88 2007 371 375
56. F Stoeckel, J Konnerth, W Kantner, J Moser, and W. Gindl Tensile shear strength of UF- and MUF-bonded veneer related to data of adhesives and cell walls measured by nanoindentation Holzforschung 64 2010 337 342
57. F Stoeckel, J Konnerth, J Moser, W Kantner, and W. Gindl-Altmutter Micromechanical properties of the interphase in pMDI and UF bond lines Wood Sci Technol 46 2011 611 620
58. S Zheng, and IA Ashcroft A depth sensing indentation study of hardness and modulus of adhesives Int J Adhes Adhes 25 2005 67 76
59. CR. Frihart Handbook of wood chemistry and wood composites Roger M Rowell, Wood adhesion and adhesives 2005 CRC press Boca Raton, Florida 215 278
60. A Pizzi, and KL. Mittal Wood adhesives 2010 Brill Academic Pub Leiden, the Netherlands
61. CR. Frihart Adhesive groups and how they relate to the durability of bonded wood J Adhes Sci Technol 23 2009 601 617
62. D. Tabor The hardness and strength of metals J Inst Metals 79 1951 1 18
63. BR Lawn, and VR. Howes Elastic recovery at hardness indentations J Mater Sci 16 1981 2745 2752
64. FJB Calleja, L Giri, IM Ward, and DLM. Cansfield Microstructure of bulk crystallized linear polyethylene - correlation of microhardness and yield stress J Mater Sci 30 1995 1139 1143
65. RA Follensbee, JA Koutsky, AW Christiansen, GE Myers, and RL. Geimer Development of dynamic mechanical methods to characterize the cure state of phenolic resole resins J Appl Polym Sci 47 1993 1481 1496 (Pubitemid 23633781)
66. L Muszynski, FH Wang, and SM. Shaler Short-term creep tests on phenol-resorcinol-formaldehyde (PRF) resin undergoing moisture content changes Wood Fiber Sci 34 2002 612 624 (Pubitemid 35354413)
67. FH Wang, and YC. Hu Effect of resin pH on creep behaviour of cured phenol formaldehyde resins J. Central South Univ Technol (English Edition) 14 2007 306 309
68. BH River, RO Ebewele, and GE. Myers Failure Mechanisms in wood joints bonded with urea-formaldehyde adhesives Holz Roh Werkstoff 52 1994 179 184
69. P Hass, FK Wittel, M Mendoza, HJ Herrmann, and P. Niemz Adhesive penetration in beech wood: experiments Wood Sci Technol 46 2012 243 256
70. RO. Ebewele Differential scanning calorimetry and dynamic mechanical analysis of amine-modified urea-formaldehyde adhesives J Appl Polym Sci 58 1995 1689 1700
71. Z Da-Peng, and F. Hong Mechanical and high-temperature properties of glass fibers reinforced phenolic composites J Reinf Plast Compos 27 2008 1449 1460
72. B George, C Simon, M Properzi, A Pizzi, and G. Elbez Comparative creep characteristics of structural glulam wood adhesives Holz Roh Werkstoff 61 2003 79 80
73. K Richter, A Pizzi, and A. Despres Thermal stability of structural one-component polyurethane adhesives for wood - structure-property relationship J Appl Polym Sci 102 2006 5698 5707 (Pubitemid 44807170)
74. S Clauss, K Allenspach, J Gabriel, and P. Niemz Improving the thermal stability of one-component polyurethane adhesives by adding filler material Wood Sci Technol 45 2011 383 388
75. N Ling, N Hori, and A. Takemura Effect of postcure conditions on the dynamic mechanical behavior of water-based polymer-isocyanate adhesive for wood J Wood Sci 54 2008 377 382
76. WJ Grigsby, CJ Ferguson, RA Franich, and GT. Russell Evaluation of latex adhesives containing hydrophobic cores and poly(vinyl acetate) shells: potential to improve poly(vinyl acetate) performance Int J Adhes Adhes 25 2005 127 137
77. S Clauss, M Joscak, and P. Niemz Thermal stability of glued wood joints measured by shear tests Eur J Wood Wood Prod 69 2011 101 111
78. HJ Deppe, and K. Schmidt Additional tests for the aging behavior of filled glueline products Holz Roh Werkstoff 52 1994 355 360
79. J Custodio, J Broughton, and H. Cruz A review of factors influencing the durability of structural bonded timber joints Int J Adhes Adhes 29 2009 173 185
80. X Lu, and A. Pizzi Curing conditions effects on the characteristics of thermosetting adhesives-bonded wood joints - Part 1: Substrate influence on TTT and CHT curing diagrams of wood adhesives Holz Roh Werkstoff 56 1998 339 346 (Pubitemid 128484819)
81. X Lu, and A. Pizzi Curing conditions effects on the characteristics of thermosetting adhesives-bonded wood joints: Part 2: Hot postcuring improvement of UF particleboards and its temperature forecasting model Holz Roh Werkstoff 56 1998 393 401 (Pubitemid 128480006)
82. Ohlmeyer M. Untersuchungen über die Eigenschaftsentwicklung von Holzwerkstoffplatten nach dem Heipressen. Universität Hamburg Hamburg; 2002.
83. Stoeckel F. (unpublished results), (2011).
84. DM Brewis, J Comyn, and C. Phanopoulos Durability and surface analytical studies of adhesive bonding to wood J Adhes 21 1987 303 311
85. V Shenoy, IA Ashcroft, GW Critchlow, AD Crocombe, and MMA. Wahab An investigation into the crack initiation and propagation behaviour of bonded single-lap joints using backface strain Int J Adhes Adhes 29 2009 361 371
86. RO Ebewele, GE Myers, BH River, and JA. Koutsky Polyamine-modified urea-formaldehyde resins. 1. Synthesis, structure, and properties J Appl Polym Sci 42 1991 2997 3012
87. RO Ebewele, BH River, and GE. Myers Polyamine-modified urea-formaldehyde-bonded wood joints. 3. Fracture-toughness and cyclic stress and hydrolysis resistance J Appl Polym Sci 49 1993 229 245
88. RO Ebewele, BH River, GE Myers, and JA. Koutsky Polyamine-modified urea-formaldehyde resins. 2. Resistance to stress-induced by moisture cycling of solid wood joints and particleboard J Appl Polym Sci 43 1991 1483 1490
89. O Fleischer, and R. Marutzky Hydrolysis of urea-formaldehyde resins: disintegration of wood-based panels due to hydrolytic degradation of the glue-joint Holz Roh Werkstoff 58 2000 295 300
90. PK Kavvouras, D Koniditsiotis, and J. Petinarakis Resistance of cured urea-formaldehyde resins to hydrolysis: a method of evaluation Holzforschung 52 1998 105 110 (Pubitemid 128556725)
91. GE. Myers Hydrolytic stability of cured urea-formaldehyde resins Wood Sci 15 1982 127 138
92. S Veigel, U Müller, J Keckes, M Obersriebnig, and W. Gindl-Altmutter Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds Cellulose 18 2011 1227 1237
93. JG Broughton, and AR. Hutchinson Adhesive systems for structural connections in timber Int J Adhes Adhes 21 2001 177 186 (Pubitemid 32529294)
94. Clauss S, Dijkstra DJ, Gabriel J, Karbach A, Matner M, Meckel W, et al. Influence of the filler material on the thermal stability of one-component moisture-curingpolyurethane adhesives. J Appl Polym Sci 2012;124(5):3641-3649, 10.1002/app.35223.
95. W Gindl, and U. Muller Shear strain distribution in PRF and PUR bonded 3-ply wood sheets by means of electronic laser speckle interferometry Wood Sci Technol 40 2006 351 357 (Pubitemid 43999238)
96. GL Jialanella, and EO. Shaffer The effect of adhesive modulus on the performance of Smc Lap shear joints J Adhes Sci Technol 7 1993 1171 1181
97. H Kishi, Y Akamatsu, M Noguchi, A Fujita, S Matsuda, and H. Nishida Synthesis of epoxy resins from alcohol-liquefied wood and the mechanical properties of the cured resins J Appl Polym Sci 120 2011 745 751
98. F Lopez-Suevos, and CE. Frazier Fracture cleavage analysis of PVAc latex adhesives: Influence of phenolic additives Holzforschung 60 2006 313 317
99. TW Pechar, S Sohn, GL Wilkes, S Ghosh, CE Frazier, and A Fornof Characterization and comparison of polyurethane networks prepared using soybean-based polyols with varying hydroxyl content and their blends with petroleum-based polyols J Appl Polym Sci 101 2006 1432 1443 (Pubitemid 44076932)
100. K Umemura, S Kawai, Y Mizuno, and H. Sasaki Dynamic mechanical properties of thermosetting resin adhesives II. Urea resin (Mokuzai Gakkaishi) J Japan Wood Res Soc 42 1996 489 496 (Pubitemid 126568580)