Drilling of bone: A comprehensive review

Journal of Clinical Orthopaedics and Trauma

Volumn 4, Issue 1, 2013, Pages 15-30

  Pandey, Rupesh Kumar ^a   Panda, S S ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY PATNA   (India)

Author keywords

Bone drilling; Bone fracture; Immobilization; Thermal osteonecrosis

Indexed keywords

BIOMATERIAL;

AUTOMATED BONE DRILLING SYSTEM; AUTOMATION; BONE DRILLING; BONE NECROSIS; BONE TEMPERATURE; BONE THICKNESS; CELL DEATH; CLOSED TYPE INTERNAL COOLING SYSTEM; COOLANT; COOLING; CORTICAL BONE; CUTTING FACE CLEARANCE ANGLE; CUTTING FACE FLANK; CUTTING FACE FLUTE; CUTTING FACE HELIX ANGLE; CUTTING FACE RAKE ANGLE; DRILL DIAMETER; DRILL POINT ANGLE; DRILL POINT CHISEL EDGE; DRILL WEAR; DRILLING DEPTH; DRILLING ENERGY; DRILLING PARAMETERS; DRILLING SPECIFICATION; DRILLING SPEED; EXTERNAL COOLING SYSTEM; FEED RATE; GENERAL PATHOLOGICAL PARAMETERS; HUMAN; MUSCULOSKELETAL SYSTEM PARAMETERS; NONHUMAN; OPEN TYPE INTERNAL COOLING SYSTEM; ORTHOPEDIC SURGERY; OSTEOCYTE; PHYSICAL PARAMETERS; PRACTICE GUIDELINE; PRIORITY JOURNAL; PRODUCT PARAMETERS; REVIEW; SYSTEMATIC REVIEW; TEMPERATURE; TEMPERATURE MEASUREMENT; THERAPEUTIC ERROR; THERMAL INJURY; THERMAL OSTEONECROSIS; THERMAL OSTEONECROSIS THRESHOLD;

EID: 84876414504     PISSN: 09765662     EISSN: 22133445     Source Type: Journal    
DOI: 10.1016/j.jcot.2013.01.002     Document Type: Review

References (84)

1. Udiljak T., Ciglar D., Skoric S. Investigation into bone drilling and thermal bone necrosis. Adv Prod Eng Manag 2007, 2:103-112.
2. Ueda T., Wada A., Hasegawa K., et al. Design optimization of surgical drills using the Taguchi method. J Biomech Sci Eng 2010, 5(5).
3. Eriksson R.A., Albrektsson T., Magnusson B. Assessment of bone viability after heat trauma. A histological, histochemical and vital microscopic study in the rabbit. Scand J Plast Reconstr Surg 1984, 18:261-268.
4. Moritz A.R., Henriques F.C. Studies of thermal injury: II. The relative importance of time and surface temperature in the causation of cutaneous burns. Am J Pathol 1947, 23:695-720.
5. Lundskog J. Heat and bone tissue. Scand J Plast Reconstr Surg Suppl 1972, 9:1-80.
6. Pallan F.G. Histological change in bone after insertion of skeletal fixation pins. J Oral Surg Anest Hosp Dent Serv 1960, 18:400-408.
7. Augustin G., Zigman T., Davila S., et al. Cortical bone drilling and thermal osteonecrosis. J Clin Biomech 2012, 27(4):313-325.
8. Noble B. Bone microdamage and cell apoptosis. Eur Cell Mater 2003, 6:46-56.
9. Baron R., Horne W.C. Bone resorption. Topics in Bone Biology 2005, Springer, London. F. Bronner, M.C. Farach-Carson, J. Rubin (Eds.).
10. Franssen Bas B.G.M., Van Diest Paul J., Schuurman Arnold H., Kon Moshe Drilling K-wires, what about the osteocytes? An experimental study in rabbits. Arch Orthop Trauma Surg 2008, 128(1):83-87.
11. Eriksson R.A., Albrektsson T. Temperature threshold levels for heat-induced bone tissue injury: a vital-microscopic study in the rabbit. J Prosthet Dent 1983, 50:101-107.
12. Bonfield W., Li C.H. The temperature dependence of the deformation of bone. J Biomech 1968, 7(2):323-329.
13. Berman A.T., Reid J.S., Yanicko D.R., Sih G.C., Zimmerman M.R. Thermally induced bone necrosis in rabbits: relation to implant failure in humans. Clin Orthop 1984, 186:284-292.
14. Eriksson R.A., Albrektsson T. The effect of heat on bone regeneration: an experimental study in the rabbit using bone growth chamber. J Oral Maxillofac Surg 1984, 42:705-711.
15. Martin R.B., Burr D.B. Structure, Function and Adaptation of Compact Bone 1989, Raven Press, New York.
16. Eriksson A.R., Albrektsson T., Albrektsson B. Heat caused by drilling cortical bone. Temperature measured in vivo in patients and animals. Acta Orthop Scand 1984, 55(6):629-631.
17. Eriksson R.A., Albrektsson T., Grane B., Mcqueen D. Thermal-injury to bone - a vital-microscopic description of heat-effects. Int J Oral Surg 1982, 11(2):115-121.
18. Eriksson R.A., Adell R. Temperatures during drilling for the placement of implants using the osseointegration technique. J Oral Maxillofac Surg 1986, 44:4-7.
19. Thompson H.C. Effect of drilling into bone. J Oral Surg 1958, 16:22-30.
20. Vaughan R.C., Peyton F.A. The influence of rotational speed on temperature rise during cavity preparation. J Dent Res 1951, 30(5):737-744.
21. Matthews Larry S., Hirsch C. Temperatures measured in human cortical bone when drilling. J Bone Joint Surg Am 1972, 54:297-308.
22. Augustin G., Davila S., Mihoci K., Udiljak T., Vedrina D.S., Antabak A. Thermal osteonecrosis and bone drilling parameters revisited. Arch Orthop Trauma Surg 2008, 128:71-77.
23. Brisman D.L. The effect of speed, pressure, and time on bone temperature during the drilling of implant sites. Int J Oral Maxillofac Implants 1996, 11:35-37.
24. Hillery H.T., Shuaib I. Temperature effects in drilling of human and bovine bone. J Mater Process Technol 1999, 92-93:302-308.
25. Bachus K.N., Rondina M.T., Hutchinson D.T. The effects of drilling force on cortical temperatures and their duration: an in vitro study. Med Eng Phys 2000, 22:685-691.
26. Nam O.H., Yu W.J., Choi M.Y., Kyung H.M. Monitoring of bone temperature during osseous preparation for orthodontic micro-screw implants: effect of motor speed and pressure. Key Eng Mater 2006, 321-323:1044-1047.
27. Sharawy M., Misch C.E., Weller N., Tehemar S. Heat generation during implant drilling: the significance of the motor speed. J Oral Maxillofac Surg 2002, 60:1160-1169.
28. Boyne P.J. Histologic response of bone to sectioning by high-speed rotary instruments. J Dent Res 1964, 45:270-276.
29. Moss R.W. Histopathologic reaction of bone to surgical cutting. Oral Surg Oral Med Oral Pathol 1964, 17:405-414.
30. Spartz S. Early reaction in bone following the use of burs rotating at conventional and ultra speeds. Oral Surg Oral Med Oral Pathol 1965, 19:808-816.
31. Abouzgia M.B., James D.F. Temperature rise during drilling through bone. Int J Oral Maxillofac Implants 1997, 12(3):342-353.
32. Natali C., Ingle P., Dowell J. Orthopaedic bone drills - can they be improved. J Bone Joint Surg Br 1996, 78-B:357-362.
33. Iyer S., Weiss C., Mehta A. Effect of drill speed on heat production and the rate and quality of bone formation in dental implant osteotomies. Part I: relationship between drill speed and heat production. Int J Prosthodont 1997, 10(5):411-414.
34. Iyer S., Weiss C., Mehta A. Effect of drill speed on heat production and the rate and quality of bone formation in dental implant osteotomies. Part II: relationship between drill speed and healing. Int J Prosthodont 1997, 10(6):536-540.
35. Reingewirtz Y., Szmukler-Moncler S., Senger B. Influence of different parameters on bone heating and drilling time in implantology. Clin Oral Implants Res 1997, 8:189-197.
36. Tu Yuan-Kun, Hong You-Yao, Chen Yung-Chuan Finite element modeling of Kirschner pin and bone thermal contact during drilling. Life Sci J 2009, 6(4).
37. Tu Yuan-Kun, Chen Li-Wen, Chiang Chun-Hui, Chen Yung-Chuan, Lu Wei-Hua, Tsai Hsun-Heng Thermal Contact Simulation of the Drill Bit and Bone During Drilling 2010, 978-1-4244-4713-8/10.IEEE.
38. Karaca F., Aksakal B., Kom M. Influence of orthopaedic drilling parameters on temperature and histopathology of bovine tibia: an in vitro study. Med Eng Phys 2011.
39. Lee J., Ozdoganlar O.B., Rabin Y. An experimental investigation on thermal exposure during bone drilling. Med Eng Phys 2012.
40. Jacob C.H., Berry J.T. A study of the bone machining process - drilling. J Biomech 1976, 9:343-349.
41. Abouzgia M.B., James D.F. Measurement of shaft speed while drilling through bone. Int J Oral Maxillofac Implants 1995, 53:1308-1315.
42. Merchant M.E. Mechanics of metal cutting process. J Appl Phys 1945, 16:267-324.
43. Wiggins K.L., Malkin S. Drilling of bone. J Biomech 1976, 9:553-559.
44. Karmani S., Lam F. The design and function of surgical drills and K-wires. Curr Orthop 2004, 18:484-490.
45. Lavelle C., Wedgwood D. Effect of internal irrigation on frictional heat generated from bone drilling. J Oral Surg 1980, 38:499-503.
46. Haider R., Watzek G., Plenk H. Effect of drill cooling and bone structure on IMZ implant fixation. Int J Oral Maxillofac Implants 1993, 8:83-91.
47. Benington I.C., Biagioni P.A., Briggs J., Shearidan S., Lamey P.J. Thermal changes observed at implant sites during internal and external irrigation. Clin Oral Implants Res 2002, 13(3):293-297.
48. Kalidindi V. Optimization of Drill Design and Coolant Systems During Dental Implant Surgery. MS thesis, University of Kentucky; 2004.
49. Bagci E., Ozcelik B. Effects of different cooling conditions on twist drill temperature. Int J Adv Manuf Technol 2007, 34:867-877.
50. Kirschner H., Meyer W. Entwichlung einer innenkuhlung fur chirurgische bohrer. Dtsch Zahnaztl Zeitschrift 1975, 30:436-438.
51. Sener B.C., Dergin G., Gursoy B., Kelesoglu E., Slih I. Effects of irrigation temperature on heat control in vitro at different drilling depths. Clin Oral Implants Res 2009, 20:294-298.
52. Al-Dabag A.N., Sultan Ahmed A. Effect of cooling an irrigation solution during preparation of implant site on heat generation using Elite system for implant. Al-Rafidain Dent J 2010, 10(2):260-264. (Experimental Study).
53. Augustin G., Davila S., Udilljak T., Staroveski T., Brezak D., Babic S. Temperature changes during cortical bone drilling with a newly designed step drill and internally cooled drill. Int Orthop 2012.
54. Cardioli G., Majzoub Z. Heat generation during implant site preparation: an in vitro study. J Oral Maxillofac Implants 1997, 12:186-193.
55. Tehemer S.H. Factors affecting heat generation during implant site preparations: a review of biologic observations and future considerations. Int J Oral Maxillofac Implants 1999, 14:127-136.
56. Oliveira N., Alaejos-Algarra F., Mareque-Bueno J., Ferrés-Padró E., Hernández-Alfaro F. Thermal changes and drill wear in bovine bone during implant site preparation. A comparative in vitro study: twisted stainless steel and ceramic drills. Clin Oral Implants Res 2011.
57. Matthews L.S., Green C.A., Goldstein S.A. The thermal effects of skeletal fixation-pin insertion in bone. J Bone Joint Surg Am 1984, 66:1077-1083.
58. Branemark P.I. Osseointegration and its experimental background. J Prosthet Dent 1983, 50:399-410.
59. Itay S., Tsur H. Thermal osteonecrosis complicating Steinmann pin insertion in plastic surgery. Plast Reconstr Surg 1983, 72:557-561.
60. Saha S., Pal S., Albright J.A. Surgical drilling: design and performance of an improved drill. J Biomech Eng 1982, 104:245-252.
61. Lee J., Rabin Y., Ozdoganlar O.B. A new thermal model for bone drilling with application to orthopaedic surgery. Med Eng Phys 2011.
62. Bechtol C.O., Ferguson A.B., Laing P.G. Metals and Engineering in Bone and Joint Surgery 1959, Williams and Wilkins, Baltimore.
63. Burstein A., Currey J., Frankel V., Heiple K., Lunseth P., Vessely J. Bone strength, the effect of screw holes. J Bone Joint Surg Am 1972, 54A:1143-1156.
64. Hufner T., Geerling J., Oldag G., Richter M., Kfuri M., Pohlemann T. Accuracy study of computer-assisted drilling: the effect of bone density, drill bit characteristics and use of a mechanical guide. J Orthop Trauma 2005, 19:317-322.
65. Jacob C.H., Berry J.T., Pope M.H., Hoaglund F.T. A study of the bone machining process - orthogonal cutting. J Biomech 1974, 7:131-136.
66. Farnworth G.H., Burton J.A. Optimization of drill geometry for orthopaedic surgery. Int Mach Tool Des and Res Conf 15th Proc 1974, 227-233.
67. Bertollo N., Gothelf T.K., Walsh W.R. 3-Fluted orthopaedic drills exhibit superior bending stiffness to their two fluted rivals: clinical implications for targeting ability and the incidence of drill bit failure. Injury 2008, 39:734-741.
68. Bertollo N., Walsh W.R. Drilling of bone: practicality, limitations and complications associated with surgical drill bits. Biomech Appl 2011.
69. Bertollo N., Milne H.R.M., Ellis L.P., Stephens P.C., Gillies R.M., Walsh W.R. A comparison of thermal properties of 2- and 3- fluted drills and the effect on bone cell viability and screw pull out strength in an ovine model. Clin Biomech 2010, 25:613-617.
70. Narashimha K., Osman M.O.M., Chandrasekhar S., Frazao J. An investigation into the influence of helix angle on the torque-thrust coupling effect in twist drills. Int J Adv Manuf Technol 1987, 2(4):91-105.
71. Fuchsberger A. The damaging temperature at the machining of the bone. Unfallchirurgie 1988, 14(4):173-183.
72. Davidson S.R.H., James D.F. Measurement of thermal conductivity of bovine cortical bone. Med Eng Phys 2000, 22:741-747.
73. Sneath R.S. The determination of optimum twist drill shape for bone. Biomechanics and related bioengineering topics. Proceedings of the Symposium of Glasgow 1964, Peragamon Press, Oxford.
74. Stephenson D.A., Agapiou J.S. Metal Cutting Theory and Practice 1997.
75. Jochum R.M., Reichart P.A. Influence of multiple use of Timedur-titanium cannon drills: thermal response and scanning electron microscopic findings. Clin Oral Implants Res 2000, 11(2):139-143.
76. Allan W., Williams E.D., Kerawala C.J. Effects of repeated drill use on temperature of bone during preparation for osteosynthesis self-tapping screws. Br J Oral Maxillofac Surg 2005, 43(4):314-319.
77. Chacon G.E., Bower D.L., Larsen P.E., McGlumphy E.A., Beck F.M. Heat production by 3 implant drill systems after repeated drilling and sterilization. J Oral Maxillofac Surg 2006, 64(2):265-269.
78. Ercoli C., Funkenbusch P.D., Lee H.J., Moss M.E., Graser G.N. The influence of drill wear on cutting efficiency and heat production during osteotomy preparation for dental implants: a study of drill durability. Int J Oral Maxillofac Implants 2004, 19(3):335-349.
79. Misir A.F., Sumer M., Yenisey M., Ergioglu E. Effect of surgical drill guide on heat generated from implant drilling. J Oral Maxillofac Surg 2009, 67(12):2663-2668.
80. Wootton R., Reeve J., Veall N. The clinical measurement of skeletal blood flow. Clin Sci Mol Med 1976, 50:261-268.
81. Augustin G., Davila S., Udiljak T., Vedrina D.S., Bagatin D. Determination of spatial distribution of increase in bone temperature during drilling by infrared thermography: preliminary report. Arch Orthop Trauma Surg 2009, 129(5):703-709.
82. Alam K., Mitrofanov A.V., Silberschmidt V.V. Measurement of surface roughness in conventional and ultrasonically assisted bone drilling. Am J Biomed Sci 2009, 1:312-320.
83. Eshet Y., Mann R.R., Anaton A., Yacoby T., Gefen A., Jerby E. Microwave drilling of bones. IEEE Trans Biomed Eng 2006, 53(6).
84. Hsu Y.L., Lee S.T., Lin H.W. A modular mechatronic system for automatic bone drilling. Biomed Eng Appl Basis Commun 2001, 13:168-174.