Optimization of physical parameters for batch mode Zn (II) ion removal from liquid phase: A potential biosorption study

Environmental Progress and Sustainable Energy

Volumn 32, Issue 2, 2013, Pages 213-222

  Mishra, Vishal ^a   Dalal, Shailu ^a   Balomajumder, Chandrajit ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY ROORKEE   (India)

Author keywords

biosorption; FTIR; maximum inhibitory concentration; scanning electron microscopy; zinc sequestering bacteria VMSDCM; Zn (II) ion

Indexed keywords

BIOSORPTION CAPACITY; FOURIER TRANSFORMATIONS; FTIR; INHIBITORY CONCENTRATION; METAL ION SORPTIONS; NEGATIVELY CHARGED SURFACES; PHYSICAL PARAMETERS; SCANNING ELECTRON MICROGRAPHS;

BACTERIA; BIOSORPTION; FOURIER TRANSFORM INFRARED SPECTROSCOPY; FOURIER TRANSFORMS; LIQUIDS; METAL IONS; OPTIMIZATION; SCANNING ELECTRON MICROSCOPY; ZINC COMPOUNDS;

ZINC;

BACTERIA (MICROORGANISMS);

EID: 84876289363     PISSN: 19447442     EISSN: 19447450     Source Type: Journal    
DOI: 10.1002/ep.10637     Document Type: Article

References (56)

1. Akar, S.T., Yetimoglu, Y., &, Gedikbey, T., (2009). Removal of chromium (VI) ions from aqueous solutions by using Turkish montmorillonite clay: Effect of activation and modification. Desalination, 244, 97-108.
2. Argun, M.E., Dursun, S., Karatas, M., &, Guru, M., (2008). Activation of pine cone using Fenton oxidation for Cd (II) and Pb (II) removal. Bioresoure Technology, 99, 8691-8698.
3. Demiral, H., Demiral, I., Tumsek, F., &, Karabacakoglu, B., (2008). Adsorption of chromium (VI) from aqueous solution by activated carbon derived from olive bagasse and applicability of different adsorption models. Chemical Engineering Journal, 144, 188-196.
4. Norton, L., Baskaran, K., &, Mckenzie, T., (2004). Biosorption of zinc from aqueous solutions using biosolids. Advances in Environmental Research, 8, 629-635.
5. Roney, N., Smith, V., Cassandra, M., Williams, D.V.M., Osier, M., &, Paikoff, S.J., (2005). Toxicological profile of zinc, Washington, DC: Agency for Toxicology and Disease Registry.
6. Simon, H.B., Wbbertaman, A., Wanger, D., Tomaska, L., &, Malcolm, H., (2001). Environmental Health Criteria, Zinc, World Health Organization, Geneva.
7. Klein, C.J., (2000). Zinc supplementation. Journal of the American Dietetic Association, 100, 1137-1138.
8. Mishra, V., Balomajumder, C., &, Agarwal, V.K., (2010). Biosorption of Zn (II) onto the surface of non-living biomasses: A comparative study of adsorbent particle size and removal capacity of three different biomasses. Water, Air, and Soil Pollution, 211, 489-500.
9. Grzeszczyk, A., &, Rosocka, M.R., (2007). Extraction of zinc (II), iron (II) and iron (III) from chloride media with dibutylbutylphosphonate. Hydrometallurgy, 86, 72-79.
10. Csicsovszki, G., Kekesi, T., &, Torok, T.I., (2007). Selective recovery of Zn and Fe from spent pickling acid solutions by the combination of anions exchange and electrowinnig technique. Hydrometallurgy, 77, 19-28.
11. Carrera, J.A., Bringas, E., Roman, M.F.S., &, Ortiz, I., (2009). Selective membrane alternative to the recovery of zinc from hot dip galvanizing effluent. Journal of Membrane Science, 326, 672-680.
12. Basha, C.A., Selvi, S.J., Ramasamy, E., &, Chellammal, S., (2008). Removal of arsenic and sulphate from the copper smelting effluent. Chemical Engineering Journal, 141, 89-98.
13. Mansur, M.B., Rocha, S.D.F., Magalhaes, F.S., &, Benedetto, J.D.S., (2008). Selective extraction of zinc (II) over iron (II) from spent hydrochloric acid pickling effluents. Journal of Hazardous Materials, 150, 669-678.
14. Silva, R.M.P., Rodriguez, A.A., Gomez, J.M.D.O., &, Moreno, D.C., (2009). Biosorption of chromium, copper, manganese, and zinc by Pseudomonas aeruginosa AT 18 isolated from a site contaminated with petroleum. Bioresoure Technology, 100, 1533-1536.
15. Liu, H.L., Chen, B.Y., Lan, Y.W., &, Cheng, Y.C., (2004). Biosorption of Zn (II) and Cu(II) by the indigenous Thiobacillus thiooxidans. Chemical Engineering Journal, 97, 195-201.
16. Khambhaty, Y., Mody, K., Basha, S., &, Jha, B., (2009). Kinetic equilibrium and thermodynamic studies on biosorption of hexavalent chromium by dead fungal biomass of marine Aspergillus niger. Chemical Engineering Journal, 145, 489-495.
17. Velasquez, L., &, Dussan, J., (2009). Biosorption and bioaccumulation of heavy metals on dead and living biomass of Bacillus spharicus. Journal of Hazardous Materials, 167, 713-716.
18. Mishra, V., Balomajumder, C., &, Agarwal, V. K., (2010). Zn(II) ion biosorption onto surface of eucalyptus leaf biomass: Isotherm, kinetic, and mechanistic modeling, Clean-Soil, Air, Water, 38, 1062-1073.
19. Wang. J., &, Chen. C., (2009). Biosorbents for heavy metal removal and their future. Biotechnology Advances, 27, 195-226.
20. Liu, H.L., Chen, Y.B., Lan, Y.W., &, Cheng, Y.C., (2004). Biosorption of Zn (II) and Cu (II) by indigenous Thiobacillus thiooxidans. Chemical Engineering Journal, 97, 195-201.
21. Kazy, S.K., D'bSouza, S.F., &, Sar, P., (2009). Uranium and thorium sequestration by a Pseudomonas sp.:Mechanism and chemical characterization. Journal of Hazardous Materials, 163, 65-72.
22. Wakatsuki, T., (1995). Metal oxidoreduction by microbial cells. Journal of Industrial Microbiology, 14, 169-177.
23. Chatterjee, S.K., Bhattacharya, I., &, Chandra, G., (2010). Biosorption of heavy metals from industrial waste water by Geobaccillus thermodenitrificans. Journal of Hazardous Materials, 175, 117-125.
24. Vullo, D.L., Ceretti, H.M., Daniel, M.A., Ramrez, S.A.M., &, Zalts, A., (2008). Cadmium, zinc and copper biosorption mediated by Pseudomonas vernoii 2E. Bioresoure Technology, 99, 5574-5581.
25. Sag, Y., &, Kutsal, T., (2007). Determination of the biosorption heats of heavy metal ions on Zoogloea ramigera and Rhizopus arrhizus. Biochemical Engineering Journal, 6, 145-151.
26. Lodi, A., Solisio, C., Converti, A., &, Borghi, D.M., (1998). Cadmium, zinc, copper, silver, chromium (III) removal from wastewaters by Sphaerotilus natans. Bioprocess Engineering, 19, 197-203.
27. Sambrook, J., Fritsch, E.F., &, Maniatis, T., (1989). Molecular cloning: A laboratory manual (3rd edition). New York: Cold Spring Harbor.
28. Felsenstein, J., (1993). PHYLIP (Phylogeny Inference Package) version 3.5c, Distributed by the author. Department of Genetics, University of Washington, Seattle.
29. Srivastava, V.C., Swamy, M.M., Mall, I.D., Prasad, B., &, Mishra, I.M., (2006). Adsorptive removal of phenol by bagasse fly ash and activated carbon: Equlibrium, kinetics and thermodynamics. Colloids and Surface A: Physicochemical and Engineering Aspects, 272, 89-104.
30. Rocha, C.G., Zaia, D.A.M., Alfaya, R.V.S., &, Alfaya, A.A.S., (2008). Use of rice straw as biosorbent for removal of Cu(II), Zn(II), Cd(II) and Hg(II) ions in industrial effluents. Journal of Hazardous Materials, 166, 383-388.
31. Basha, S., Murthy, Z.V.P., &, Jha, B., (2009). Sorption of Hg (II) onto Carica Papaya: Experimental studies and design of batch sorber. Chemical Engineering Journal, 147, 226-234.
32. Dash, R.R., Balomajumder, C., &, Kumar, A., (2009). Removal of cyanide from water and wastewater using granular activated carbon. Chemical Engineering Journal, 146, 408-413.
33. Iqbal, M., &, Edyvean, R.G.J., (2004). Biosorption of lead, copper and zinc ions on loofa sponge immobilized biomass of Phanerochaete chrysosporium. Minerals Engineeering, 144, 181-187.
34. Ozdemir, S., Kilinc, E., Poli, A., Nicolus, B., &, Guen, K., (2009). Biosorption of Cd, Cu, Ni, Mn and Zn from aqueous solutions by thermophillic bacteria, Geobacillus toebii sub.sp. decanicus and Geobacillus thermoleovorans sbu.sp. strombolensis: Equilibrium, kinetic and thermodynamic studies. Chemical Engineering Journal, 152, 195-206.
35. Chen, B.Y., Vivek, P., Utgikar, Y.P., Harmon, S.M., Henry, H., Tabak, H.H., Bishop, D.F., &, Govind, R., (2000). Studies on biosorption of zinc(II) and copper(II) on Desulfovibrio desulfuricans. International Biodeterioration & Biodegradation, 46, 11-18.
36. Sahin, Y., &, Ozturk, A., (2005). Biosorption of chromium(VI) ions from aqueous solution by the bacterium Bacillus thuringiensis. Process Biochemistry, 40, 1895-1901.
37. Cayllahua, J.E.B., Carvalho, R.J.D., &, Torem, M.L., (2009). Evaluation of equilibrium, kinetic and thermodynamic parameters for biosorption of nickel (II) ions onto bacteria strain,Rhodococcus opacus. Minerals Engineering, 22, 1318-1325.
38. Ozacan, A.S., Tunali, S., Akar, T., &, Ozacan, A., (2009). Biosorption of lead (II) ions onto waste biomass of Phaseolus vulgaris L: Estimation of the equilibrium, kinetic and thermodynamic parameters. Desalination, 244, 188-198.
39. Kacar, Y., Arpa, C., Tan, S., Denizli, A., Genc, O., &, Arica, M.Y., (2002). Biosorption of Hg (II) and Cd (II) from aqueous solutions: comparison of biosorptive capacity of alginate and immobilized live and heat inactivatedPhanerochaete chrysosporium. Process Biochemistry, 37, 601-610.
40. Fan, T., Liu, Y., Feng, B., Zeng, G., Yang, C., &, Zhou, M., (2008). Biosorption of cadmium (II), zinc (II) and lead (II) byPenicillium simplicissimum: Isotherms, kinetic and thermodynamics. Journal of Hazardous Materials, 160, 655-661.
41. Marques, A.M., Roca, X., Simon-Pujol, M.D., Fuste, M.C., &, Congredo, F., (1991). Uranium accumulation by Pseudomonas sp. EPS-5028. Applied Microbiology and Biotechnology, 35, 406-410.
42. Vaghetti, J.C.P., Lima, E.C., Royer, B., Brasil, J.L., Cunha, B.M.D., Simon, N.M., Carsdo, N.F., &, Norena, C.P.Z., (2008). Application of Brazilian-Pine fruit coat as a biosorbent to removal of Cr (VI) from aqueous solution-Kinetics and equilibrium study. Biochemical Engineering Journal, 42, 67-76.
43. Kargi, F., &, Cikla, S., (2007). Determination of model parameters for zinc (II) ion biosorption onto powdered waste sludge (PWS) in a fed batch system. Journal of Environmental Management, 85, 883-890.
44. Ahmad, A., Rafatullah, M., Sulaiman, O., Ibrahim, M.H., Chii, Y.Y., &, Siddque, B.M., (2009). Removal of Cu(II) and Pb (II) ions from aqueous solutions by adsorption on sawdust of Meranti Wood. Desalination, 247, 636-646.
45. Tunali, S., &, Akar, T., (2006). Zn(II) biosorption properties of Botrytis Cinerea biomass. Journal of Hazardous Materials, B131, 137-145.
46. Sari, A., &, Tuzen, M., (2009). Kinetic and equilibrium studies of biosorption of Pb (II) and Cd (II) from aqueous solution by macrofungus(Amanita rubescens) biomass. Journal of Hazardous Materials, 164, 1004-1011.
47. Nughlou, Y., &, Malock, E., (2009). Thermodynamic and kinetic studies for environmentally friendly Ni(II) biosorption using waste pomace of olive oil factory Bioresoure Technology, 100, 2375-2380.
48. Sherbert, G.V., (1978). The biophysical characterization of cell surface. London: Academic Press.
49. Yee, N., &, Fein, J., (2001). Cd adsorption onto bacterial surfaces: A universal adsorption edge? Geochemica et Cosmochemica Acta, 65, 2037-2042.
50. Gunié, V., Martins, J.M.F., Causse, B., Durand, A., Gaudet, J.P., &, Spadini, L., (2007). Effect of cultivation and experimental conditions on the surface reactivity of the metal-resistant bacteria Cupriadus metallidurans CH34 to protons, cadmium and zinc. Chemical Geology, 236, 266-280.
51. Mergeay, M., Monchy, S., Vallaeys, T., Auquier, V., Benotmane, A., Bertin, P., Taghavi, S., Dunn, J., van der Lelie, D., &, Wattiez, R., (2003). Ralstonia metallidurans, a bacterium specifically adapted to toxic metals: Towards a catalogue of metal-responsive genes. FEMS Microbiology, 9, 1181-1191.
52. Siddiqui, R.A., Benthin, K., &, Schlegel, H.G., (1989). Cloning of pMOL28-encoded nickel resistance genes and expression of the genes in Alcaligenes eutrophus and Pseudomonas spp. Journal of Bacteriology, 171, 5071-5078.
53. Liesegang, H., Lemke, K., Siddiqui, R.A., &, Schlegel, H.G., (1993). Characterization of the inducible nickel and cobalt resistance determinant cnr from pMOL28 of Alcaligenes eutrophus CH34. Journal of Bacteriology, 175, 767-778.
54. 2+ by aerobic granules. Journal of Biotechnology, 102, 233-239.
55. 2+ biosorption by Oscillatoria anguistssima. Process Biochemistry, 34, 77-85.
56. King, P., Rakesh, N., Lahari, B.S., Kumar, P.Y., &, Prasad, V.S.R.K., (2008). Biosorption of zinc onto Syzygicum cumini L.: Equilibrium and kinetic studies. Chemical Engineering Journal, 144, 181-187.