Metallic biomaterials

Biomaterials: Principles and Applications

Volumn , Issue , 2002, Pages 1-20

  Park, Joon B ^a   Kon Kim, Young ^b  

^a UNIVERSITY OF IOWA   (United States)

^b Inje University   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84876228127     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (37)

1. ASTM. (1980). Annual Book of ASTM Standards (Philadelphia, PA: American Society for Testing and Materials).
2. Black, J. (1992). Biological Performance of Materials, 2nd ed. (New York: Marcel Dekker).
3. Bordiji, K., Jouzeau, J., Mainard, D., Payan, E., Delagoutte, J., and Netter, P. (1996). Evaluation of the effect of three surface treatments on the biocompatibility of 316L stainless steel using human differentiated cells. Biomaterials 17, 491-500.
4. Breen, D. J. and Stoker, D. J. (1993). Titanium lines: a manifestation of metallosis and tissue response to titanium alloy megaprostheses at the knee. Clin. Radiol. 43, 274-277.
5. Buehler, W. J., Gilfrich, J. V., and Wiley, R. C. (1963). Effect of low-temperature phase changes on the mechanical properties of alloys near composition Ti-Ni. J. Appl. Phys. 34, 1475-1477.
6. Davidson, J. A., Mishra, A. K., Kovacs, P., and Poggie, R. A. (1994). New surface hardened, low-modulus, corrosion-resistant Ti-13Nb-13Zr alloy for total hip arthroplasty. Biomed. Mater. Eng. 4, 231-243.
7. Devine, T. M. and Wulff, J. (1975). Cast vs. wrought cobalt-chromium surgical implant alloys. J. Biomed. Mater. Res. 9, 151-167.
8. Dobbs, H. S. and Scales, J. T. (1979). Fracture and corrosion in stainless steel hip replacement stems. In: Corrosion and Degradation of Implant Materials, B. C. Syrett and A. Acharya, Eds. (Philadelphia, PA: American Society for Testing and Materials), pp. 245-258.
9. Duerig, T. W., Melton, K. N., Stockel, D., and Wayman, C. M. (1990). Engineering Aspects of Shape Memory Alloys (London: Butterworth-Heinemann).
10. Feighan, J. E., Goldberg, V. M., Davy, D., Parr, J. A., and Stevenson, S. (1995). The influence of surfaceblasting on the incorporation of titanium-alloy implants in a rabbit intramedullary model. J. Bone Joint Surg. 77A, 1380-1395.
11. Ferguson, S. D., Paulus, J. A., Tucker, R. D., Loening, S. A., and Park, J. B. (1992). Effect of thermal treatment on heating characteristics of Ni-Cu alloy for hyperthermia: preliminary studies. J. Appl. Biomater. 4, 55-60.
12. Granchi, D., Ciapetti, G., Savarino, L., Cavedagna, D., Donati, M. E., and Pizzoferrato, A. (1996). Assessment of metal extract toxicity on human lymphocytes cultured in vitro. J. Biomed. Mater. Res. 31, 183-191.
13. Greener, E. H., Harcourt, J. K., and Lautenschlager, E. P. (1972). Materials Science in Dentistry (Baltimore, MD: Williams & Wilkins).
14. Hazan, R., Brener, R., and Oron, U. (1993). Bone growth to metal implants is regulated by their surface chemical properties. Biomaterials 14, 570-574.
15. Hille, G. H. (1966). Titanium for surgical implants. J. Mater. 1, 373-383.
16. Imam, M. A., Fraker, A. C., Harris, J. S., and Gilmore, C. M. (1983). Influence of heat treatment on the fatigue lives of Ti-6Al-4V and Ti-4.5Al-5Mo-1.5CR. In: Titanium Alloys in Surgical Implants, H. A. Luckey and F. E. Kubli, Eds. (Philadelphia, PA: ASTM Special Technical Publication 796), pp. 105-119.
17. Kasemo, B. and Lausma, J. (1988). Biomaterial and implant surface: a surface science approach. Int. J. Oral Maxillofac Impl. 3, 247-259.
18. Keating, F. H. (1956). Chromium-Nickel Austenitic Steels (London: Butterworth).
19. Keller, J. C., Stanford, C. M., Wightman, J. P., Draughn, R. A., and Zaharias, R. (1994). Characterizations of titanium implant surfaces. III. J. Biomed. Mater. Res. 28, 939-946.
20. Kieswetter, K., Schwartz, Z., Hummert, T. W., Cochran, D. L., Simpson, J., and Boyan, B. D. (1996). Surface roughness modulates the local production of growth factors and cytokines by osteoblastlike MG-63 cells. J. Biomed. Mater. Res. 32, 55-63.
21. Kim, H., Miyaji, F., Kokubo, T., and Nakamura, T. (1996). Preparation of bioactive Ti and its alloys via simple chemical surface treatment. J. Biomed. Mater. Res. 32, 409-417.
22. Lee, J. H., Park, J. B., Andreasen, G. F., and Lakes, R. S. (1988). Thermomechanical study of Ni-Ti alloys. J. Biomed. Mater. Res. 22, 573-588.
23. Nielsen, J. P. (1986). Dental Noble-Metal Casting Alloys: Composition and Properties. In: Encyclopedia of Materials Science and Engineering, M. B. Bever, Ed. (Oxford, Cambridge: Pergamon Press), pp. 1093-1095.
24. Pourbaix, M. (1974). Atlas of Electrochemical Equilibria in Aqueous Solutions, 2nd ed. (Houston/CEBELCOR, Brussels: NACE).
25. Richards Mfg. Company. (1980). Biophase Implant Material, technical information publication 3846 (Memphis, TN).
26. Schmalzried, T. P., Peters, P. C., Maurer, B. T., Bragdon, C. R., and Harris, W. H. (1996). Long-duration metal-on-metal total hip arthroplasties with low wear of the articulating surfaces. J. Arthroplasty 11, 322-331.
27. Semlitch, M. (1980). Properties of wrought CoNiCrMo alloy Protasul-10, a highly corrosion and fatigue resistant implant material for joint endoprostheses. Eng. Med. 9, 201-207.
28. Sloter, L. E. and Piehler, H. R. (1979). Corrosion-fatigue performance of stainless steel hip nails-Jewett type. In: Corrosion and Degradation of Implant Materials, B. C. Syrett and A. Acharya, Eds. (Philadelphia, PA: American Society for Testing and Materials), pp. 173-195.
29. Smith, C. J. E. and Hughes, A. N. (1966). The corrosion-fatigue behavior of a titanium-6w/o aluminum-4w/o vanadium alloy. Eng. Med. 7, 158-171.
30. Smith, W. F. (1993). Structure and Properties of Engineering Alloys, 2nd ed. (New York: McGraw-Hill).
31. Takatsuka, K., Yamamuro, T., Nakamura, T., and Kokubo, T. (1995). Bone-bonding behavior of titanium alloy evaluated mechanically with detaching failure load. J. Biomed. Mater. Res. 29, 157-163.
32. Takeshita, F., Ayukawa, Y., Iyama, S., Murai, K., and Suetsugu, T. (1997). Long-term evaluation of bone-titanium interface in rat tibiae using light microscopy, transmission electron microscopy, and image processing. J. Biomed. Mater. Res. 37, 235-242.
33. Wayman, C. M. and Duerig, T. W. (1990). An introduction of martensite and shape memory. In: Engineering Aspects of Shape Memory Alloys, T. W. Duerig, K. N. Melton, D. Stockel, and C. M. Wayman, Eds. (London: Butterworth-Heinemann), pp. 3-20.
34. Wayman, C. M. and Shimizu, K. (1972). The shape memory (‘Marmem’) effect in alloys. Metal Sci. J. 6, 175-183.
35. Williams, D. F. (1982). Biocompatibliity in Clinical Practice (Boca Raton, FL: CRC Press).
36. Wynblatt, P. (1986). Platinum Group Metals and Alloys. In: Encyclopedia of Materials Science and Engineering, M. B. Bever, Ed. (Oxford, Cambridge: Pergamon Press), pp. 3576-3579.
37. Yan, W., Nakamura, T., Kobayashi, M., Kim, H., Miyaji, F., and Kokubo, T. (1997). Bonding of chemically treated titanium implants to bone. J. Biomed. Mater. Res. 37, 267-275.