Characterization of the material from the induction healing porous asphalt concrete trial section

Materials and Structures/Materiaux et Constructions

Volumn 46, Issue 5, 2013, Pages 831-839

  Liu, Quantao ^a   Schlangen, Erik ^a   Van De Ven, Martin ^a  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

Four point bending test; Healing; Induction heating; Porous asphalt concrete; Steel wool

Indexed keywords

FOUR-POINT BENDING TEST; HEALING; INDIRECT TENSILE STRENGTH; LABORATORY EXPERIMENTS; POROUS ASPHALT CONCRETES; POROUS ASPHALT MIXTURES; POROUS ASPHALT PAVEMENT; STEEL WOOL;

ASPHALT; ASPHALT CONCRETE; CONCRETES; FATIGUE OF MATERIALS; MIXTURES; TENSILE STRENGTH; WOOL; WOOL FIBERS; YARN;

INDUCTION HEATING;

ASPHALT; BENDING; CONCRETE; FATIGUE; INDUCTION HEATING; POROUS MATERIALS; STEEL WOOL; TENSILE STRENGTH; WOOL; YARN;

EID: 84875872028     PISSN: 13595997     EISSN: None     Source Type: Journal    
DOI: 10.1617/s11527-012-9936-9     Document Type: Article

References (25)

1. Voskuilen JLM, Verhoef PNW (2003) Cause of premature ravelling failure of porous asphalt. In: Sixth international RILEM symposium on performance testing and evaluation of bituminous materials, pp 191-197
2. Padmos C (2002) Over ten years experience with porous road surfaces. In: ISAP ninth international conference on asphalt pavements, Copenhagen, Denmark
3. Voskuilen JLM, Huurman M (2009) Conversations. Centre for Transport and Navigation of the Dutch Ministry of Transport, Public Works and Water management, Delft
4. Kneepkens A, van Hoof Th, Schaefer H, van Keulen W (2004) VIA-RAL- for porous asphalt: a result of research and development, but most of all of implementation. Wegbouwkundige Werkdagen
5. Miradi M (2004) Neural network models predict ravelling and analyse material/construction properties. In: Proceedings of intelligent systems and control, Hawaii, USA
6. Bhasin A, Bommavaram R, Greenfield ML, Little DN (2011) Use of molecular dynamics to investigate self-healing mechanisms in asphalt binders. J Mater Civ Eng 23(4):485-492
7. Little DN, Bhasin A (2007) Exploring mechanisms of healing in asphalt mixtures and quantifying its impact. In: van der Zwaag S (ed) Self healing materials an alternative approach to 20 centuries of materials science. Springer series in materials science, vol 100. Springer, Dordrecht, pp 205-218
8. Castro M, Sánchez JA (2006) Fatigue and healing of asphalt mixtures: discriminate analysis of fatigue curves. J Transp Eng 132(2):168-174
9. Williams D, Little DN, Lytton RL, Kim YR, Kim Y (2001) Microdamage healing in asphalt and asphalt concrete. Research report 7229. A&M University, College Station
10. Qiu J, Molenaar AAA, van de Ven MFC, Wu S, Yu J (2012) Investigation of self healing behaviour of asphalt mixes using beam on elastic foundation setup. Mater Struct 45(5):777-791
11. Garcia A, Schlangen E, van de ven M (2011) Asphalt mastic self healing. In: 3rd International conference on self healing materials, bath, UK, 27-29 June 2011
12. García A (2012) Self-healing of open cracks in asphalt mastic. Fuel 93:264-272
13. Liu Q, Schlangen E, van de Ven M, García A (2010) Induction heating of electrically conductive porous asphalt concrete. Constr Build Mater 24(7):1207-1213
14. Liu Q, Schlangen E, van de Ven M, García A (2011) Induction healing of asphalt mastic and porous asphalt concrete. Constr Build Mater 25:3746-3752
15. Garcia A, Schlangen E, van de Ven M, van Bochove G (2012) Optimization of composition and mixing process of a self-healing porous asphalt. Constr Build Mater 30:59-65
16. Liu Q, Schlangen E, van de Ven M (2012) Evaluation of the induction healing effect of porous asphalt concrete through four-point bending fatigue test. Constr Build Mater 29:403-409
17. Garcia A, Schlangen E, van de Ven M, Liu Q (2009) Electrical conductivity of asphalt mortar containing conductive fibers and fillers. Constr Build Mater 23:3175-3181
18. Liu Q, Schlangen E, van de Ven M, Poot M Optimization of steel fiber used for induction heating in porous asphalt concrete. In: Mao B, Tian Z, Huang H, Gao Z (eds) Traffic and transportation studies 2010 (pp 1320-1330). American Society of Civil Engineers, USA
19. Liu Q, Schlangen E, van de Ven M, Garcia A (2010) Healing of porous asphalt concrete via induction heating. Road Mater Pavement Des 11(SI):527-542
20. Liu Q, Schlangen E, van de Ven M (2012) Induction healing of porous asphalt concrete. Transp Res Record J Transp Res Board (in press)
21. Li Y (2007) Using compaction parameters and indirect tensile strength to evaluate asphalt concrete rutting potential. Master thesis, Changsha University of Technology, China
22. Behbahani H, Nowbakht S, Fazaeli H, Rahmani J (2009) Effects of fiber type and content on the rutting performance of stone matrix asphalt. J Appl Sci 9(10):1980-1984
23. Scott EB (1993) Polymer/fiber modified asphalt fracture mechanisms and microstructure relationships to distresses and environmental factors. PhD Thesis, Michigan State University
24. Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564-1583
25. Liu Q, Schlangen E, van de Ven M, Poot M (2012) Performance prediction of the self healing porous asphalt trial section. Report. Delft University of Technology, The Netherlands