Simulation of springback with the draw/bend test

Proceedings of the 2nd International Conference on Intelligent Processing and Manufacturing of Materials, IPMM 1999

Volumn 1, Issue , 1999, Pages 91-104

  Li, K P ^a   Geng, L M ^a   Wagoner, R H ^a  

^a OHIO STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FRICTION; MANUFACTURE;

ANTICLASTIC CURVATURE; FRICTION COEFFICIENTS; INTEGRATION POINTS; MATERIAL MODELING; NUMERICAL PARAMETERS; NUMERICAL SENSITIVITY; PROCESS PARAMETERS; THROUGH-THICKNESS;

FINITE ELEMENT METHOD;

EID: 84875865389     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/IPMM.1999.792458     Document Type: Conference Paper

References (37)

1. Proceedings of the 2nd International Conference NUMLSHEET'93-Numerical Simulation of 3-D Sheet Metal Forming Processes, 1993.
2. Proceedings of the 5th International Conference on Numerical Methods in Industrial Forming Processes NUMIFOR' 95-Simulation of Materials Processing: Theory, Methods and Applications, 1995.
3. Proceedings of the 3rd International Conference NUMISHEET'96-Numerical Simulation of 3-D Sheet Metal Forming Processes, 1996.
4. Proceedings of the 6th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM'98-Simulation of Materials Processing: Theory, Methods and Applications, 1998.
5. Zhang, D. Lee, 1995. Effect of Process Variables and Material Properties on the Springback &havior of 2D Draw Bending Parts, Automotive Stamping Technology, 11-18.
6. M. K. Mickalich, M. L. Wenner, 1988. Calculation of Springback and its Variation in Channel Forming Operations, Symp. Proc. for the March 3, Soc. of Automotive Engineers Meeting.
7. M. L. Wenner, 1983. On Work Hardening and Springback in Plane Strain Draw Forming. J. Applied Metal Working, 2(4).
8. F. Morestin, M. Boivin, "On the necessity of taking into account the variation in the Young Modulus with plastic strain in elastic-plastic software", Nuclear Engineering and design, 162, 1996, 107-1 16
9. S. C. Tang, "Application of an anisotropic hardening rule to springback prediction", Advanced Technology of Plasticity, (1996) 719-722
10. Kuwabara, S. Takahashi and K. Ito, 1996. Springback Analysis of Sheet Metal Subjected to Bending-Unbending under Tension, Part I and 11, Advanced Technology of Plasticity, 743-750.
11. Kunio Miyauchi, 1992. Deformation path effect on stress-strain relation in sheet metals, J. Materials Processing Technology, 34, 195-200.
12. M. L. Wenner, 1982. An Analysis of Springback on the Punch Corner Radius in Channel Forming, (General Motors Research Report), May 19, 1982.
13. M. Sunseri, J. Cao, A. P. Karafillis, M. C. Boyce, "Accommodation of Springback Error in Channel Forming Using Active Binder Force Control: Numerical Simulations and Experiments", Transactions of ASME, vol. 118, July, 1996.
14. ValIance and D. K. Matlock, 1992. Application of the Bending-Under-Tension Friction Test to Coated Sheet Steels. J. Material Engineering and Performance, 1(5), 685-693.
15. 15: L. C. Zhang, G. Lu and S. C. Leong, 1997. V-shaped sheet forming by deformable punches. J. of Materials Processing Technology, 63, 134-139
16. W. H. Frey, M. L. Wenner, 1987. Development and Applications of a One-dimensional Finite Element Code for Sheet Metal Forming Analysis", (General Motors Research Report), September.
17. Mattiasson, A. Strange, P. Thilderkvist, A. Samuelsson, 1995. Simulation of springback in sheet metal forming. 5th International Conf. on NumericaL Methods in Industrial Forming Process, NY, 115-124
18. N. He, R. H. Wagoner, 1996. Springback Simulation in Sheet Metal Forming. NUMISHEET 96, cds. J. K. Lee, G. L. Kinzel, R. H. Wagoner, Ohio State University, 308-315. a
19. R. H. Wagoner, W. D. Carden, W. P. Carden, D. K. Matlock, 1997. Springback after drawing and bending of metal sheets, THERMEC '97, Australia. b
20. W. D. Carden, 1997. Springback after drawing and bending of metal sheets. MS thesis, MSE/OSU.
21. K. Li and R. H. Wagoner, 1998. Simulation of springback. NUMIFORM98, 21-31.
22. W. P. Carden, 1997. Analysis of Springback in Draw-bending Forming, MS Thesis, MSE/OSU.
23. ABAQUS User Manual, version 5. 5
24. M. J. Saran, R. H. Wagoner, 1991. "A Consistent Implicit Formulation for Nonlinear Finite Element Modeling with Contact and Friction, Pt. I-Theory", ASME Trans.-J. AppI. Mech. , 58, 499-506.
25. D. J. Zhou, R. H. Wagoner, 1995. Development and application of Sheet-Forming Simulation", J. of Materials Processing Technology, 50, 1-16.
26. M. A. Crisfield, 1991. Non-linear Finite Element Analysis of Solids and Structures, J. Wiley & Sons, England.
27. Wang, G. Kinzel and T. Altan, 1993. Mechanical Modeling of Plane-Strain Bending of Sheet and Plate. J. Materials Processing Technology, 39, 279-304.
28. Hosford, and R. Caddell, 1993. Metal Forming: Mechanics and Metallurgy. Englewood Cliffs, Prentice-Hall.
29. C. J. Burgoyne, M. A. Crisfield, 1990. Numerical integration strategy for plates and shells. mt. J. Num. Meth. Engng. , 29, 105-12 1.
30. M. J. Wenner, 1996. private communication, General Motors Corporation, March.
31. R. l I. Wagoner, J. L. Chenot, 1997. Fundamentals of Metal Forming, N w York, NY, J Wiley & Sons.
32. Huang, J. C. Gerdeen, 1994. Springback of Double Curved Developable Sheet Metal Surface. Analysis of Autobody Stamping Technology, (Society of Automotive Engineers), 125-138.
33. F. Pourboghrat, E. Chu, 1995. Prediction of Springback and Side-Wall Curl in 2-D Draw Bending. J. of Materials Processing Technology, 50, 36 1-374.
34. T. X. Yu, L. C. Zhang, 1996. Plastic bending, theory and applications. World Scientific.
35. Chaboche, J. L. , 1986, Time-independent constitutive theories for cyclic plasticity, International Journal of Plasticity, 2, 2, 149-188.
36. V. Balakrishnan, 1999. Measurement of in-plane Bauschinger effect in. metal sheets. MS thesis, MS E/O S U
37. Z. C. Xia, S. C. Tang, J. C. Carnes, 1998. Accurate springbaek prediction with mixed solid/shell e1ements' NUMIFORM98, 813-818.