Recovery of recycled acrylonitrile-butadiene-styrene, through mixing with styrene-ethylene/butylene-styrene

Journal of Materials Processing Technology

Volumn 213, Issue 8, 2013, Pages 1268-1283

  Peydro, M A ^a   Parres, F ^a   Crespo, J E ^a   Navarro, R ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

ABS; Degradation; Injection; Recovery; SEBS; Shrinkage

Indexed keywords

BOND (MASONRY); BUTADIENE; COMPUTER AIDED ENGINEERING; DEGRADATION; IMPACT STRENGTH; INJECTION (OIL WELLS); MIXING; RECOVERY; RECYCLING; SHRINKAGE; TENSILE STRENGTH;

ABS; ACRYLONITRILE-BUTADIENE-STYRENE; LOWER TEMPERATURES; NOTCHED IMPACT STRENGTH; OPTIMAL INJECTION; PROCESSING TEMPERATURE; REPROCESSING CYCLES; SEBS;

STYRENE;

EID: 84875854542     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2013.02.012     Document Type: Article

References (25)

1. X.J. Bai, D.H. Isaac, and K. Smith Reprocessing acrylonitrile-butadiene- styrene plastics: structure-property relationships Polymer Engineering and Science 47 2007 120 130
2. R. Balart, J. Lopez, D. Garcia, and M.D. Salvador Recycling of ABS and PC from electrical and electronic waste. Effect of miscibility and previous degradation on final performance of industrial blends European Polymer Journal 41 2005 2150 2160
3. T. Boronat, V.J. Segui, M.A. Peydro, and M.J. Reig Influence of temperature and shear rate on the rheology and processability of reprocessed ABS in injection molding process Journal of Materials Processing Technology 209 2009 2735 2745
4. M.M. Cross Rheology of non-newtonian fluids - a new flow equation for pseudoplastic systems Journal of Colloid Science 20 1965 417 437
5. T.C. Chang, and E. Faison Shrinkage behavior and optimization of injection molded parts studied by the Taguchi method Polymer Engineering and Science 41 2001 703 710
6. J.I. Eguiazabal, and J. Nazabal Reprocessing polycarbonate acrylonitrile-butadiene-styrene blends - influence on physical-properties Polymer Engineering and Science 30 1990 527 531
7. A. Flores, M. Pieruccini, U. Nochel, N. Stribeck, and F.J.B. Calleja Recrystallization studies on isotropic cold-crystallized PET: influence of heating rate Polymer 49 2008 965 973
8. A. Ganguly, S. Saha, A.K. Bhowmick, and S. Chattopadhyay Augmenting the performance of acrylonitrile-butadiene-styrene plastics for low-noise dynamic applications Journal of Applied Polymer Science 109 2008 1467 1475
9. E.K. Karahaliou, and P.A. Tarantili Stability of ABS compounds subjected to repeated cycles of extrusion processing Polymer Engineering and Science 49 2009 2269 2275
10. B. Li, C.Y. Wan, Y. Zhang, and J.L. Ji Blends of poly(2,6-dimethyl-1,4- phenylene oxide)/polyamide 6 toughened by maleated polystyrene-based copolymers: mechanical properties, morphology, and rheology Journal of Applied Polymer Science 115 2010 3385 3392
11. X.D. Liu, A. Boldizar, M. Rigdahl, and H. Bertilsson Recycling of blends of acrylonitrile-butadiene-styrene (ABS) and polyamide Journal of Applied Polymer Science 86 2002 2535 2543
12. R. Navarro, S. Ferrandiz, J. Lopez, and V.J. Segui The influence of polyethylene in the mechanical recycling of polyethylene terephtalate Journal of Materials Processing Technology 195 2008 110 116
13. B. Ozcelik, and I. Sonat Warpage and structural analysis of thin shell plastic in the plastic injection molding Materials and Design 30 2009 367 375
14. J.M. Perez, J.L. Vilas, J.M. Laza, S. Arnaiz, F. Mijangos, E. Bilbao, and L.M. Leon Effect of reprocessing and accelerated weathering on ABS properties Journal of Polymers and the Environment 18 2010 71 78
15. M.A. Peydro, F. Parres, J.E. Crespo, and D. Juarez Study of rheological behavior during the recovery process of high impact polystyrene using Cross-WLF model Journal of Applied Polymer Science 120 2011 2400 2410
16. M.J. Reig, V.J. Segui, S. Ferrandiz, and J.D. Zamanillo An evaluation of processability by injection molding of ABS/PC blends obtained from recycled materials Journal of Polymer Engineering 27 2007 29 54
17. M.J. Reig, V.J. Segui, and J.D. Zamanillo Rheological behavior modeling of recycled ABS/PC blends applied to injection molding process Journal of Polymer Engineering 25 2005 435 457
18. D. Salari, and H. Ranjbar Study on the recycling of ABS resins: simulation of reprocessing and thermo-oxidation Iranian Polymer Journal 17 2008 599 610
19. C.Y. Shen, L.X. Wang, and Q. Li Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method Journal of Materials Processing Technology 183 2007 412 418
20. H. Shin, and E.S. Park Analysis of crack phenomenon for injection-molded screw using moldflow simulation Journal of Applied Polymer Science 113 2009 2702 2708
21. S.H. Tang, Y.J. Tan, S.M. Sapuan, S. Sulaiman, N. Ismail, and R. Samin The use of Taguchi method in the design of plastic injection mould for reducing warpage Journal of Materials Processing Technology 182 2007 418 426
22. M. Tasdemir Properties of acrylonitrile-butadiene-styrene/polycarbonate blends with styrene-butadiene-styrene block copolymer Journal of Applied Polymer Science 93 2004 2521 2527
23. M. Tasdemir, and S. Karatop Effect of styrene-isopren-styrene addition on the recycled polycarbonate/acrylonitrile-butadiene-styrene polymer blends Journal of Applied Polymer Science 101 2006 559 566
24. M.L. Williams, R.F. Landel, and J.D. Ferry Mechanical properties of substances of high molecular weight. 19. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids Journal of the American Chemical Society 77 1955 3701 3707
25. N.A.W. Yin, Y.X. Zhang, Y. Zhang, X.F. Zhang, and W. Zhou Preparation and properties of PC/SAN alloy modified with styrene-ethylene-butylene-styrene block copolymer Journal of Applied Polymer Science 106 2007 637 643