Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 21, Issue , 2013, Pages 67-76

  Takaichi, Atsushi ^a   Suyalatu, ^a   Nakamoto, Takayuki ^b   Joko, Natsuka ^a   Nomura, Naoyuki ^a,c   Tsutsumi, Yusuke ^a   Migita, Satoshi ^a   Doi, Hisashi ^a   Kurosu, Shingo ^d   Chiba, Akihiko ^d   Wakabayashi, Noriyuki ^a   Igarashi, Yoshimasa ^a   Hanawa, Takao ^a,e  

^a TOKYO MEDICAL AND DENTAL UNIVERSITY   (Japan)

^b OSAKA MUNICIPAL TECHNICAL RESEARCH INSTITUTE   (Japan)

^c TOHOKU UNIVERSITY   (Japan)

^d TOHOKU UNIVERSITY   (Japan)

^e UNIVERSITY OF TOKYO   (Japan)

Author keywords

Cellular dendrite; Co Cr Mo alloy; Dental application; Microstructure; Preferential crystallographic orientation; Selective laser melting

Indexed keywords

CELLULAR DENDRITES; COCRMO ALLOY; CRYSTALLOGRAPHIC ORIENTATIONS; DENTAL APPLICATIONS; SELECTIVE LASER MELTING;

CHROMIUM; FABRICATION; MECHANICAL PROPERTIES; MOLYBDENUM; MOLYBDENUM ALLOYS; SCANNING ELECTRON MICROSCOPY; TENSILE TESTING; X RAY DIFFRACTION ANALYSIS; X RAY SPECTROSCOPY;

MICROSTRUCTURE;

ALLOY;

ANISOTROPY; ARTICLE; DENDRITE; DENTAL DEVICE; DISSOLUTION; MELTING POINT; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; SELECTIVE LASER MELTING; TENSILE STRENGTH; X RAY SPECTROMETRY;

DENTAL MATERIALS; HARDNESS; HEATING; LASERS; MATERIALS TESTING; RADIATION DOSAGE; SURFACE PROPERTIES; TENSILE STRENGTH; VITALLIUM;

EID: 84875268139     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2013.01.021     Document Type: Article

References (29)

1. Akova T., Ucar Y., Tukay A., Balkaya M.C., Brantley W.A. Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain. Dental Materials 2008, 24:1400-1404.
2. Craig R.G., Powers J.M., Wataha J.C. Dental Materials: Properties and Manipulation 2000, Mosby, Missouri, pp. 229-231. 7th ed.
3. Handbook of Materials for Medical Devices 2003, ASM International, OH, pp. 31-37. J.R. Davis (Ed.).
4. España F.A., Balla V.K., Bose S., Bandyopadhyay A. Design and fabrication of CoCrMo alloy based novel structures for load bearing implants using laser engineered net shaping. Materials Science and Engineering C 2010, 30:50-57.
5. Gibson I. Rapid prototyping for medical applications. Advanced Manufacturing Technology for Medical Applications 2005, 1-14. John Wiley & Sons, West Sussex. A. Gibson (Ed.).
6. Hanawa T., Hiromoto S., Asami K. Characterization of the surface oxide film of a Co-Cr-Mo alloy after being located in quasi-biological environments using XPS. Applied Surface Science 2001, 183:68-75.
7. Harris I.D. Additive manufacturing: A transformational advanced manufacturing technology. Advanced Materials and Processes 2012, 5:25-29.
8. Huang P., López H.F. Athermal e-martensite in a Co-Cr-Mo alloy: Grain size effects. Materials Letters 1999, 39:249-253.
9. ISO, 2006. Dentistry-Metallic Materials for Fixed and Removable Restorations and Appliances. ISO22674:2006(E). Geneva, pp. 4-5.
10. Jevremovic D., Puskar T., Kosec B., Vukelic D., Budak I., Aleksandrovic S., Egbeer D., Williams R. The analysis of the mechanical properties of F75 Co-Cr alloy for use in selective laser melting (SLM) manufacturing of removable partial dentures (RPD). Metalurgija 2012, 51:171-174.
11. Kruth J.P., Froyen L., Vaerenbergh J.V., Mercelis P., Rombouts M., Lauwers B. Selective laser melting of iron-based powder. The Journal of Materials Processing Technology 2004, 149:616-622.
12. Kubota S., Xia Y., Tomota Y. Work-hardening behavior and evolution of dislocation-microstructures in high-nitrogen bearing austenitic steels. ISIJ International 1998, 38:474-481.
13. Montero-Ocampo C., Talavela M., Lopez H. Effect of alloy preheating on the mechanical properties of as-cast Co-Cr-Mo-C alloys. Metallurgical and Materials Transactions A 1999, 30:611-620.
14. Murakami M., Nomura N., Doi H., Tsutsumi Y., Nakamura H., Chiba A., Hanawa T Microstructures of Zr-added Co-Cr-Mo alloy compacts fabricated with a metal injection molding process and their metal release in 1 mass% lactic acid. Materials Transactions 2010, 51:1281-1287.
15. Murr L.E., Gaytan S.M., Ramirez D.A., Martinez E., Hernandez J., Amato K.N., Shindo P.W., Medina F.R., Wicker R.B Metal fabrication by additive manufacturing using laser and electron beam melting technologies. Journal of Materials Science & Technology 2012, 28:1-14.
16. Okazaki Y., Gotoh E. Comparison of metal release from various metallic biomaterials in vitro. Biomaterials 2005, 26:11-21.
17. Pawley G.S. Unit-cell refinement from powder diffraction scans. Journal of Applied Crystallography 1981, 14:357-361.
18. Powers J.M., Sakaguchi R.L Craig's Restorative Dental Materials 2006, Mosby, Missouri, pp. 386-393. 12th ed.
19. Puleo A.D., Huh W.W. Acute toxicity of metal ions in cultures of osteogenic cells derived from bone marrow stromal cells. Journal of Applied Biomaterials 1995, 6:109-116.
20. Quante K., Ludwig K., Kern M. Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology. Dental Materials 2008, 24:1311-1315.
21. Sato Y., Nomura N., Fujinuma S., Chiba A. Fabrication of gas atomized Co-Cr-Mo alloy powder and microstructure of the hot-pressed compacts. Journal of the Japan Institute of Metals 2006, 70:275-280.
22. Sato Y., Nomura N., Fujinuma S., Chiba A. Microstructure and tensile properties of hot-pressed Co-Cr-Mo alloy compacts for biomedical applications. Journal of the Japan Institute of Metals 2008, 72:532-537.
23. Shiomi M., Osakada K., Nakamura K., Yamashita T., Abe F. Residual stress within metallic model made by selective laser melting process. CIRP Annals-Manufacturing Technology 2004, 53:195-198.
24. Simchi A. Direct laser sintering of metal powders: mechanism, kinetics and microstructural features. Materials Science and Engineering A 2006, 428:148-158.
25. Smith D.C., Pillar R.M., Metson J.B., McIntyre N.S. Dental implant materials. II. Preparative procedures and surface spectroscopic studies. Journal of Biomedial Materials Research 1991, 25:1069-1084.
26. 1997, ASM International, OH. A. Villars, A. Prince, H. Okamoto (Eds.).
27. Wataha J.C Alloys for prosthodontic restorations. Journal of Prosthetic Dentistry 2002, 87:351-363.
28. Yoda K., Suyalatu, Takaichi A., Nomura N., Tsutsumi Y., Doi H., Kurosu S., Chiba A., Igarashi Y, Hanawa T. Effects of chromium and nitrogen content on the microstructures and mechanical properties of as-cast Co-Cr-Mo alloys for dental applications. Acta Biomaterialia 2012, 8:2856-2862.
29. Zhou J., Tsai H.L. Effect of electromagnetic force on melt flow and porosity prevention in pulsed laser keyhole welding. International Journal of Heat and Mass Transfer 2007, 50:2217-2235.