Failure mode analysis of carbide cutting tools used for machining titanium alloy

Ceramics International

Volumn 39, Issue 4, 2013, Pages 4449-4456

  A Ghani, Jaharah ^a   Che Haron, Che Hassan ^a   Hamdan, Siti Hartini ^b   Md Said, Ahmad Yasir ^b   Tomadi, Siti Haryani ^a  

^a UNIVERSITI KEBANGSAAN MALAYSIA   (Malaysia)

^b UNIVERSITI KUALA LUMPUR   (Malaysia)

Author keywords

Coated carbide tool; Failure mode; Milling process; Titanium alloy

Indexed keywords

COATED CARBIDE TOOLS; COATED CARBIDES; COATING MATERIAL; CUTTING EDGES; CUTTING OPERATIONS; CUTTING SPEED; DEPTH OF CUT; DIMENSIONAL ACCURACY; ELEVATED TEMPERATURE; FAILURE MODE ANALYSIS; FEED-RATES; HIGH STRENGTH; HIGH TEMPERATURE; INTENSIVE RESEARCH; LOADING AND UNLOADING; MACHINED SURFACE; MECHANICAL RESISTANCE; MILLING PARAMETERS; MILLING PROCESS; RAKE FACE; SUBSTRATE MATERIAL; TOOL FAILURES; TOOL LIFE;

BRITTLE FRACTURE; CARBIDE TOOLS; CUTTING; CUTTING FLUIDS; CUTTING TOOLS; FAILURE MODES; MILLING (MACHINING); STRESS ANALYSIS; TITANIUM ALLOYS; UNLOADING;

LOADING;

EID: 84874648084     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2012.11.038     Document Type: Article

References (21)

1. J.A. Ghani, M.N.A.M. Rodzi, N. Ibrahim, and C.H.C. Haron Prestasi Mata alat Karbida semasa mengisar hujung besi tuang FC250 dalam keadaan kering dan menggunakan bendalir pemotong Journal of Physical Science 21 2 2010 67 79
2. J.T. Benedict, T. Drozda, and F.V. Raymond Tool and Manufacturing Engineers Handbook: Machining 1983 Society of Manufacturing Engineers Bakerjian, Ramon
3. C. Donaldson, G.H. Lecain, and V.C. Goold Tool Design Third ed. 1983 Tata McGraw Hill New Delhi
4. C.H.C. Haron, A. Ginting, and J.H. Goh Wear of coated and uncoated carbides in turning tool steel Journal of Materials Processing Technology 116 2001 49 54
5. C.H.C. Haron, and A. Jawaid The effect of machining on surface integrity of titanium alloy Ti-6Al-4V Journal of Materials Processing Technology 166 2005 844 857
6. C.H.C Haron, A. Ginting, and H. Arshad Performance of alloyed uncoated and CVD-coated carbide tools in dry milling of titanium alloy Ti-6242S Journal of Materials Processing Technology 185 2007 77 82
7. T. Santhanam, P. Tierney, J.L. Hunt, Properties and selection: Nonferrous alloys and special-purpose materials, in: Metals Handbook (ASM International), 10th ed., vol. 2, Kennametal Inc., 1990, pp. 950-977.
8. T. Ozel, and A. Nadgir Prediction of flank wears by using back propagation neural network modeling when cutting hardened H-13 steel with chamfered and honed CBN tools International Journal of Machine Tools and Manufacture 42 2002 287 297
9. J.A. Arsecularatne, L.C. Zhang, and C. Montross Wear and tool life of tungsten carbide, PCBN and PCD cutting tools International Journal of Machine Tools and Manufacture 46 2005 482 491
10. A. Ginting, and M. Nouari Experimental and numerical studies on the performance of alloyed carbide tool in dry milling of aerospace material International Journal of Machine Tools and Manufacture 46 2006 758 768
11. J. Hashim, Pemprosesan Bahan, UTM Johor, Malaysia, 2003.
12. M.C. Shaw Metal Cutting Principles 1984 Clarendon Press Oxford
13. A.Y. Md Said, Kebolehmesinan aloi Titanium Ti-6Al-4V dalam keadaan lubrikasi berkuantiti minima (MQL). Tesis Dr. Falsafah, Jabatan Kejuruteraan Mekanik dan Bahan, Univeristi Kebangsaan Malaysia, 2010.
14. E.M. Trent Metal Cutting 1995 Butterworth-Heinemann Oxford
15. L.A. Kendall Tool Wear and Tool Life, Metals Handbook: Machining vol. 16 1993 ASM International
16. 3 ceramic cutting tools when machining nickel-based alloys International Journal of Machine Tools and Manufacture 45 12-13 2005 1393 1401
17. C. Arvieu, J.P. Manaud, and J.M. Quenisset Interaction between titanium and carbon at moderate temperatures Journal of Alloys and Compounds 368 2004 116 122
18. Anonymous, Sandvik Hard Material, 〈http://allaboutcementedcarbide. com/02-02.html〉. (accessed 31 10 12).
19. K. Egashira, S. Hosono, S. Takemoto, and Y. Masao Fabrication and cutting performance of cemented tungsten carbide micro-cutting tools Precision Engineering 35 4 2011 547 553
20. J. Garcia, R. Pitonak, The role of cemented carbide functionally graded outer-layers on the wear performance of coated cutting tools, International Journal of Refractory Metals & Hard Materials, in press.
21. Y. Zheng, Y. Leng, X. Xin, Z. Xu, F. Jiang, R. Wei, N. Huang, Evaluation of mechanical properties of Ti(Cr)SiC(O)N coated cemented carbide tools, Vacuum, in press.